Search NASA⌕ Search

SEARCH · Search NASA

Results for “oxygen evolution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28

Synthesis of metal metaphosphate for catalysts for oxygen evolution reactions

A method of manufacturing an electrode by disposing a three-dimensional substrate in a metal nitrate solution, drying, and thermally phosphatizing with a phosphorus source under inert gas to form a metal based phosphate catalyst on the substrate. An electrocatalyst and electrode produced via the method are also provided.

Ren, Zhifeng↗

Structure-property relationship of graphene coupled metal (Ni, Co, Fe) (oxy)hydroxides for efficient electrochemical evolution of oxygen

Design of high-efficiency electrocatalysts for the oxygen evolution reaction (OER) is critical to meet future energy demands. A series of heterogeneous electrocatalysts based on graphene coupled mixed-metal (oxy)hydroxides containing specific concentrations of nickel, cobalt, and iron were synthesized to investigate the influence of metal composition on the structure, properties, and activities for OER. The addition of iron led to isolated metal (oxy)hydroxide sheets from a few hundred nanometers to less than 5 nm, leading to a high surface area. The increased d -spacing between layers of hydroxide and abundant hydroxyl groups adsorbed on the surface of the electrocatalysts contribute to better catalytic performance as displayed by the remarkable improvement in Tafel slopes. In addition, the presence of cobalt and nickel can aid in lowering the onset potential of OER. Small amounts of iron in NiFe and NiCoFe systems were found to significantly decrease the overpotential. The best OER electrocatalysts of the series were obtained for the ternary metal hydroxide of composition Ni 0.33 Co 0.34 Fe 0.33 , which generates a low overpotential of 0.332 V in reaching 10 mA cm -1 in 0.1 M KOH and the Tafel slope is as low as 51 mV dec -1 . Density functional theory calculations demonstrate the improvements of electronic structure and free energy changes of the ternary metal oxyhydroxide for more efficient OER electrocatalysis. Altogether, this work provides a solid foundation for further development of high-efficiency, scalable, and cost-effective mixed-metal (oxy)hydroxide electrocatalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

In situ/Operando studies of electrocatalysts using hard X-ray spectroscopy

This review focuses on the use of X-ray absorption and emission spectroscopy techniques using hard X-rays to study electrocatalysts under in situ/operando conditions. The importance and the versatility of methods in the study of electrodes in contact with the electrolytes are described, when they are being cycled through the catalytic potentials during the progress of the oxygen-evolution, oxygen reduction and hydrogen evolution reactions. The catalytic oxygen evolution reaction is illustrated with examples using three oxides, Co, Ni and Mn, and two sulfides, Mo and Co. These are used as examples for the hydrogen evolution reaction. A bimetallic, bifunctional oxygen evolving and oxygen reducing Ni/Mn oxide is also presented. The various advantages and constraints in the use of these techniques and the future outlook are discussed.

47 OTHER INSTRUMENTATION↗

An Investigation of Thin-Film Ni–Fe Oxide Catalysts for the Electrochemical Evolution of Oxygen

A detailed investigation has been carried out of the structure and electrochemical activity of electrodeposited Ni-Fe films for the oxygen evolution reaction (OER) in alkaline electrolytes. Ni-Fe films with a bulk and surface composition of 40% Fe exhibit OER activities that are roughly 2 orders of magnitude higher than that of a freshly deposited Ni film and about 3 orders of magnitude higher than that of an Fe film. The freshly deposited Ni film increases in activity by as much as 20-fold during exposure to the electrolyte (KOH); however, all films containing Fe are stable as deposited. The oxidation of Ni(OH) 2 to NiOOH in Ni films occurs at potentials below the onset of the OER. Incorporation of Fe into the film increases the potential at which Ni(OH) 2 /NiOOH redox occurs and decreases the average oxidation state of Ni in NiOOH. The Tafel slope (40 mV dec-1) and reaction order in OH-(1) for the mixed Ni-Fe films (containing up to 95% Fe) are the same as those for aged Ni films. In situ Raman spectra acquired in 0.1 M KOH at OER potentials show two bands characteristic of NiOOH. The relative intensities of these bands vary with Fe content, indicating a change in the local environment of Ni-O. Similar changes in the relative intensities of the bands and an increase in OER activity are observed when pure Ni films are aged. These observations suggest that the OER is catalyzed by Ni in Ni-Fe films and that the presence of Fe alters the redox properties of Ni, causing a positive shift in the potential at which Ni(OH) 2 /NiOOH redox occurs, a decrease in the average oxidation state of the Ni sites, and a concurrent increase in the activity of Ni cations for the OER.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Role of LiCoO 2 Surface Terminations in Oxygen Reduction and Evolution Kinetics

Oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) activities of LiCoO 2 nanorods with sizes in the range from 9 to 40 nm were studied in alkaline solution. The sides of these nanorods were terminated with low-index surfaces such as (003) while the tips were terminated largely with high-index surfaces such as (104) as revealed by high-resolution transmission electron microscopy. Electron energy loss spectroscopy demonstrated that low-spin Co 3+ prevailed on the sides, while the tips exhibited predominantly high- or intermediate-spin Co 3+ . We correlated the electronic and atomic structure to higher specific ORR and OER activities at the tips as compared to the sides, which was accompanied by more facile redox of Co 2+/3+ and higher charge transferred per unit area. These findings highlight the critical role of surface terminations and electronic structures of transition metal oxides on the ORR and OER activity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electrocatalytic Properties of Nanocrystalline Calcium-Doped Lanthanum Cobalt Oxide for Bifunctional Oxygen Electrodes

Calcium-doped lanthanum cobalt oxide is a promising electrocatalyst for oxygen evolution and oxygen reduction in rechargeable metal air batteries and water electrolyzers operating with alkaline electrolyte. Nanocrystalline perovskite of composition La0.6Ca0.4CoO3 with a unique cellular internal structure was prepared at 350 degrees C and then annealed in air at progressively higher temperatures in the range of 600-750 degrees C. The samples were characterized by electrochemical techniques and X-ray photoelectron spectroscopy. The area-specific electrocatalytic activity for oxygen evolution/oxygen reduction, the oxidation state of cobalt, and the crystallite size increased with annealing temperature, while the Tafel slope remained constant. These trends provide new insights into the role of the cobalt center in oxygen evolution and oxygen reduction, and how preparation conditions can be altered to tune the activity of the cobalt center for electrocatalysis. We expect these findings to guide the design of electrocatalysts for bifunctional oxygen electrodes, in general.

Malkhandi, S↗

Tuning oxygen electrocatalysis via strain on LaNiO 3 (001)

Theoretical insights into the influence of strain on the mechanisms of the oxygen evolution and oxygen reduction reactions on LaNiO 3 (001). The slow kinetics of the oxygen evolution (OER) and oxygen reduction (ORR) reactions hamper the development of renewable energy storage and conversion technologies. Transition-metal oxides (TMOs) are cost-effective replacements to conventional noble metal catalysts for driving these electrochemical systems. Strain is known to greatly affect the electronic structure of TMO surfaces, leading to significant changes in their electrocatalytic activities. In this study, we explore the influence of strain on the OER and ORR mechanisms on the LaNiO 3 (001) surface using density functional theory (DFT).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Investigation of the electrocatalytic oxygen reduction and evolution reactions in lithium–oxygen batteries

Oxygen reduction and oxygen evolution reactions were examined on graphite electrodes with different crystal orientations. The kinetics for the redox couple O 2 /O 2 •- are very fast, therefore no catalyst seems necessary to assist the charge transfer process. Apparently, the main source of the overpotential for the O 2 reduction reaction is from mass diffusion. Li 2 O 2 becomes soluble in non-aqueous electrolytes in the presence of the tetraethylammonium tetrafluoroborate additive. The soluble B-O 2 2- ions can be oxidized electro-catalytically. The edge orientation of graphite demonstrates superior catalytic activity for the oxidation over basal orientation. The findings reveal an opportunity for recharging Li-air batteries efficiently and a new strategy of developing the catalyst for oxygen evolution reaction.

25 ENERGY STORAGE↗

Evolution of oxygenated cadmium sulfide (CdS:O) during high-temperature CdTe solar cell fabrication

Oxygenated cadmium sulfide (CdS:O) produced by reactive sputtering has emerged as a promising alternative to conventional CdS for use as the n-type window layer in CdTe solar cells. Here, complementary techniques are used to expose the window layer (CdS or CdS:O) in completed superstrate devices and combined with a suite of materials characterization to elucidate its evolution during high temperature device processing. During device fabrication amorphous CdS:O undergoes significant interdiffusion with CdTe and recrystallization, forming CdS1-yTey nanocrystals whose Te fraction approaches solubility limits. Significant oxygen remains after processing, concentrated in sulfate clusters dispersed among the CdS1-yTey alloy phase, accounting for ~30% of the post-processed window layer based on cross-sectional microscopy. Interdiffusion and recrystallization are observed in devices with un-oxygenated CdS, but to a much lesser extent. Etching experiments suggest that the CdS thickness is minimally changed during processing, but the CdS:O window layer is reduced from 100 nm to 60-80 nm, which is confirmed by microscopy. Alloying reduces the band gap of the CdS:O window layer to 2.15 eV, but reductions in thickness and areal density improve its transmission spectrum, which is well matched to device quantum efficiency. The changes to the window layer in the reactive environments of device fabrication are profoundly different than what occurs by thermal annealing in an inert environment, which produced films with a band gap of 2.4 eV for both CdS and CdS:O. These results illustrate for the first time the significant changes that occur to the window layer during processing that are critical to the performance of CdTe solar cells.

14 SOLAR ENERGY↗