Search NASA⌕ Search

SEARCH · Search NASA

Results for “parameter continuation method”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28

Gradient process parameter optimization in additive friction stir deposition of aluminum alloys

As one of the most novel additive manufacturing methods, currently selection and optimization of processing parameters in additive friction stir deposition (AFSD) have mainly relied on experiments and subsequent characterization of microstructural and mechanical properties. Such approaches are both time- and resource-consuming. Therefore, an ultrasound elastography enhanced gradient process parameter optimization method was applied in the present work to obtain a window of optimized processing parameters for AFSD processing of aluminum alloy by varying both rotational and linear deposition speeds. Further, the quality of AFSD processed layer was investigated for physical nature of surface, dynamic elastic modulus, and microstructural aspects in cross-sections of the deposited layer. The efficiency in exploring process parameters was significantly enhanced by implementing a high-throughput screening experimental design based on application of gradient process parameters and continuous ultrasound elastographs. In addition, the applied ultrasonic elastography technique assisted in evaluating the homogeneity in microstructure and mechanical properties of AFSD sample over the entire gradients of the process parameters. The techniques adopted in current work can be further extended to identify suitable parameters for AFSD fabrication of components with desired mechanical properties such as hardness, fatigue, etc.

36 MATERIALS SCIENCE↗

Spin-orbit interaction tuning of perpendicular magnetic anisotropy in L1{sub 0} FePdPt films

The dependence of perpendicular magnetic anisotropy K{sub u} on spin-orbit coupling strength ξ is investigated in L1{sub 0} ordered FePd{sub 1−x}Pt{sub x} films by time-resolved magneto-optical Kerr effect measurements and ab initio density functional calculations. Continuous tuning of K{sub u} over a wide range of magnitude is realized by changing the Pt/Pd concentration ratio, which strongly modifies ξ but keeps other leading parameters affecting K{sub u} nearly unchanged. Ab initio calculations predict a nearly quadratic dependence of K{sub u} on ξ, consistent with experimental data. K{sub u} increases with increasing chemical order and decreasing thermal spin fluctuations, which becomes more significant for samples with higher Pt concentration. The results demonstrate an effective method to tune K{sub u} utilizing its sensitivity on ξ, which will help fabricate magnetic systems with desirable magnetic anisotropy.

36 MATERIALS SCIENCE↗

Excitation spectra of bosons in optical lattices from the Schwinger-Keldysh calculation

Within the Schwinger-Keldysh formalism we derive a Ginzburg-Landau theory for the Bose-Hubbard model which describes the real-time dynamics of the complex order parameter field. Analyzing the excitations in the vicinity of the quantum phase transition, it turns out that particle-hole dispersions in the Mott phase map continuously onto corresponding amplitude-phase excitations in the superfluid phase, which have been detected recently by Bragg spectroscopy measurements.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Lead Slowing-Down Spectrometry for Spent Fuel Assay: FY11 Status Report

Executive Summary Developing a method for the accurate, direct, and independent assay of the fissile isotopes in bulk materials (such as used fuel) from next-generation domestic nuclear fuel cycles is a goal of the Office of Nuclear Energy, Fuel Cycle R&D, Material Protection and Control Technology (MPACT) Campaign. To meet this goal, MPACT supports a multi-institutional collaboration to study the feasibility of Lead Slowing Down Spectroscopy (LSDS). This technique is an active nondestructive assay method that has the potential to provide independent, direct measurement of Pu and U isotopic masses in used fuel with an uncertainty considerably lower than the approximately 10% typical of today’s confirmatory assay methods. This document is a progress report for FY2011 collaboration activities. Progress made by the collaboration in FY2011 continues to indicate the promise of LSDS techniques applied to used fuel. PNNL developed an empirical model based on calibration of the LSDS to responses generated from well-characterized used fuel. The empirical model demonstrated the potential for the direct and independent assay of the sum of the masses of 239Pu and 241Pu to within approximately 3% over a wide used fuel parameter space. Similar results were obtained using a perturbation approach developed by LANL. Benchmark measurements have been successfully conducted at LANL and at RPI using their respective LSDS instruments. The ISU and UNLV collaborative effort is focused on the fabrication and testing of prototype fission chambers lined with ultra-depleted 238U and 232Th, and uranium deposition on a stainless steel disc using spiked U3O8 from room temperature ionic liquid was successful, with improving thickness obtained. In FY2012, the collaboration plans a broad array of activities. PNNL will focus on optimizing its empirical model and minimizing its reliance on calibration data, as well continuing efforts on developing an analytical model. Additional measurements are planned at LANL and RPI. LANL measurements will include a Pu sample, which is expected to provide more counts at longer slowing-down times to help identify discrepancies between experimental data and MCNPX simulations. RPI measurements will include the assay of an entire fresh fuel assembly for the study of self-shielding effects as well as the ability to detect diversion by detecting a missing fuel pin in the fuel assembly. The development of threshold neutron sensors will continue, and UNLV will calibrate existing ultra-depleted uranium deposits at ISU.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Stopped, Bunched Beams for the TwinSol Facility

Tests of the unitarity of the Cabbibo-Kobayashi-Masakawa (CKM) matrix offer an important avenue for constraining the Standard Model of the electroweak interaction. Several methods are currently used to determine V-ud, the largest element in the top-row normalization test. One such method is through the study of superallowed T =1/2 mixed mirror transitions, which offers a complementary method to the current most-precise value that is determined from superallowed pure Fermi 0(+) 0(+) transitions. The precision currently achievable by this method is currently limited by the very low number of transitions for which the Fermi-to-Gamow-Teller mixing ratio has been measured. St. Benedict, the Superallowed Transition Beta-Neutrino Decay-Ion-Coincidence Trap, is currently under development at the University of Notre Dame's Nuclear Science Laboratory, and intends to determine for a range of new isotopes through measurements of the -neutrino asymmetry parameter a using a linear Paul trap. In order to trap these ions, the fast, continuous secondary beam separated by the TwinSol twin solenoid separator must be thermalized and bunched. The system through which this will be done will feature a large-volume gas cell in which the ions will be thermalized, a double-RF-funnel-based ion guide system for the extraction of the ions, and a radiofrequency quadrupole (RFQ) to provide cooled ion bunches for capture in the Paul trap.

beam cooling↗

Prenatal dichlorodiphenyldichloroethylene (DDE) exposure and child growth during the first year of life

Background: Due to its long-term persistence in the environment and its ability to cross the placental barrier, prenatal p,p Prime -dichlorodiphenyldichloroethene (DDE) exposure continues to be a public health concern. This study aimed to evaluate the association between prenatal DDE exposure and child growth, at birth and during the first year of life. Methods: 253 pregnant women were recruited between January 2001 and June 2005 in a prospective cohort in Morelos, Mexico. Serum levels of DDE were measured during each trimester of pregnancy by gas chromatography with an electron capture detector. Using the generalized mixed-effects models, the association between DDE and child growth parameters (weight-for-age, length-for-age, weight-for-length, BMI-for-age and head circumference-for-age Z-scores) from birth to 1 year of age was assessed. Maternal dietary intake was considered as covariable among others. Results: DDE levels were 6.3{+-}2.8 ng/mL (first trimester), 6.6{+-}2.9 ng/mL (second trimester), and 7.6{+-}2.9 ng/mL (third trimester). After adjusting for potential confounder variables, no significant associations were observed with prenatal DDE exposure and each of the selected parameters. Conclusions: Our results show no evidence of an association between prenatal DDE exposure and child growth during the first year of life.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Heralded Bell State of Dissipative Qubits Using Classical Light in a Waveguide

Maximally entangled two-qubit states (Bell states) are of central importance in quantum technologies. We show that heralded generation of a maximally entangled state of two intrinsically open qubits can be realized in a one-dimensional (1d) system through strong coherent driving and continuous monitoring. In contrast to the natural idea that dissipation leads to decoherence and so destroys quantum effects, continuous measurement and strong interference in our 1d system generate a pure state with perfect quantum correlation between the two open qubits. Though the steady state is a trivial product state which has zero coherence or concurrence, we show that, with carefully tuned parameters, a Bell state can be generated in the system's quantum jump trajectories, heralded by a reflected photon. Surprisingly, this maximally entangled state survives the strong coherent state input—a classical state that overwhelms the system. This simple method to generate maximally entangled states using classical coherent light and photon detection may, since our qubits are in a 1d continuum, find application as a building block of quantum networks.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Relationship between Surface Self-Diffusion and Bubble Mobility in Solids: Theory and Atomistic Simulation

Diffusion processes in solids are characterized by complex mechanisms occurring at the atomistic level. The relevant theoretical concepts are sufficiently developed in the case of the diffusion of point defects. At the same time, the diffusion of objects such as clusters of vacancies or nanometer-size cavities in the crystal lattice is described only in terms of continuous-medium approximation. This paper attempts to link the existing theory of diffusion of bubbles in a crystalline matrix with the atomistic description of the process on the basis of the molecular dynamics method. For simplicity, the diffusion of cavities in a two-dimensional Lennard-Jones lattice is considered. A controlled molecular dynamics method is proposed to speed up the direct computation of the diffusion rate of bubbles. Based on the results of simulation, a practical interpretation is given to a parameter of the continuum theory such as the rate of surface self-diffusion. The applicability range of the continuum theory is demonstrated, and principles for the refinement of the theory in the case of minimum-size bubbles are formulated.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

FAST Model Calibration and Validation of the OC5- DeepCwind Floating Offshore Wind System Against Wave Tank Test Data: Preprint

During the course of the Offshore Code Comparison Collaboration, Continued, with Correlation (OC5) project, which focused on the validation of numerical methods through comparison against tank test data, the authors created a numerical FAST model of the 1:50-scale DeepCwind semisubmersible system that was tested at the Maritime Research Institute Netherlands ocean basin in 2013. This paper discusses several model calibration studies that were conducted to identify model adjustments that improve the agreement between the numerical simulations and the experimental test data. These calibration studies cover wind-field-specific parameters (coherence, turbulence), hydrodynamic and aerodynamic modeling approaches, as well as rotor model (blade-pitch and blade-mass imbalances) and tower model (structural tower damping coefficient) adjustments. These calibration studies were conducted based on relatively simple calibration load cases (wave only/wind only). The agreement between the final FAST model and experimental measurements is then assessed based on more-complex combined wind and wave validation cases.

17 WIND ENERGY↗

FAST Model Calibration and Validation of the OC5-DeepCwind Floating Offshore Wind System Against Wave Tank Test Data

During the course of the Offshore Code Comparison Collaboration, Continued, with Correlation (OC5) project, which focused on the validation of numerical methods through comparison against tank test data, the authors created a numerical FAST model of the 1:50-scale DeepCwind semisubmersible system that was tested at the Maritime Research Institute Netherlands ocean basin in 2013. This paper discusses several model calibration studies that were conducted to identify model adjustments that improve the agreement between the numerical simulations and the experimental test data. These calibration studies cover wind-field-specific parameters (coherence, turbulence), hydrodynamic and aerodynamic modeling approaches, as well as rotor model (blade-pitch and blade-mass imbalances) and tower model (structural tower damping coefficient) adjustments. These calibration studies were conducted based on relatively simple calibration load cases (wave only/wind only). The agreement between the final FAST model and experimental measurements is then assessed based on more-complex combined wind and wave validation cases.

17 WIND ENERGY↗

A Case Study in the Application of TSUNAMI-3D - Part 1, Multigroup

The use of the sensitivity and uncertainty tool suite within SCALE, known as the TSUNAMI suite, has grown following its initial introduction more than a decade ago. Proper use of these tools provides a more complete understanding of system responses to perturbations, especially in the area of nuclear cross section uncertainties. Recent advances within TSUNAMI have added generalized perturbation theory to the k{sub eff} sensitivity capability that was included in TSUNAMI originally. The generation of sensitivity data is encouraged in the review process for new critical experiment requests sponsored by the US Department of Energy (DOE) Nuclear Criticality Safety Program (NCSP) to demonstrate that the proposed experiment will satisfy the identified data need. Many individuals participate in this process, but many analysts have not received proper training in the use of the TSUNAMI tools. The adjoint perturbation theory used to calculate sensitivities is not typically included in nuclear engineering curricula, leaving inexperienced engineers particularly at risk for incorrect use of the tools. The first step in the use of the TSUNAMI tools is the generation of a sensitivity data file (SDF), which contains all of the energy-dependent sensitivity data generated for a model. Most often, the SDF is generated from a three-dimensional (3D) model using either the KENO V.a or KENO-VI code within the TSUNAMI-3D sequence. The sensitivity data generated in TSUNAMI-3D must be accurate for correct quantification of system similarity or any other use of the sensitivity data. The sensitivities calculated by TSUNAMI can be affected by many of the input parameters, cross section processing models, and geometry modeling techniques used within the TSUNAMI-3D input. Fortunately, the total sensitivity of the most important nuclides can be confirmed simply by using direct perturbation (DP) calculations. Confirmation of the total sensitivity of these important nuclides provides confidence that the flux and importance function calculated within the TSUNAMI sequence will yield accurate sensitivities for all nuclides, reactions, and energies of interest. This process is essentially identical for the multigroup (MG) methods and the continuous-energy (CE) methods introduced in SCALE 6.2. This paper discusses the use of DP calculations and provides a case study to confirm that accurate sensitivities are generated by TSUNAMI-3D for a particular benchmark experiment. A companion paper provides a similar case study applying the CE TSUNAMI capability to the same critical experiment. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

A Case Study in the Application of TSUNAMI-3D - Part 2, Continuous Energy

The use of the sensitivity and uncertainty tool suite within SCALE, which is known as the TSUNAMI suite, has grown following its initial introduction more than a decade ago. Proper use of this tool provides a more complete understanding of system responses to perturbations, especially in the area of nuclear cross section uncertainties. Recent advances within TSUNAMI have added generalized perturbation theory to the k{sub eff} sensitivity capability that was included in TSUNAMI originally. The sensitivities can also be used to quantify the similarity of two systems. As an example, calculated sensitivities can be combined with cross section uncertainties to determine the similarity index ck. The generation of sensitivity data is encouraged in the review process for new critical experiment requests sponsored by the US Department of Energy (DOE) Nuclear Criticality Safety Program (NCSP) to demonstrate that the proposed experiment will satisfy the identified data need. Many analysts participate in this process, but many have not received proper training in the use of the TSUNAMI tools. The adjoint perturbation theory used to calculate sensitivities is not typically included in nuclear engineering curricula, leaving inexperienced engineers particularly at risk for incorrect use of the tools. The first step in the use of the TSUNAMI tools is the generation of a sensitivity data file (SDF), which contains all of the energy-dependent sensitivity data generated for a model. Most often, the SDF is generated from a three-dimensional (3D) model using either the KENO V.a or KENO-VI code within the TSUNAMI-3D sequence. The sensitivity data generated in TSUNAMI-3D must be accurate for correct quantification of system similarity or any other use of the sensitivity data. The sensitivities calculated by TSUNAMI can be affected by many of the input parameters, cross section processing models, and geometry modeling techniques used within the TSUNAMI-3D input. Fortunately, the total sensitivity of the most important nuclides can be confirmed simply by using direct perturbation (DP) calculations. Confirmation of the total sensitivity of these important nuclides provides confidence that the flux and importance function calculated within the TSUNAMI sequence will yield accurate sensitivities for all nuclides, reactions, and energies of interest. This process is essentially identical for multigroup (MG) and continuous-energy (CE) methods introduced in SCALE 6.2. This paper discusses the use of direct perturbation calculations and provides a case study in the use of DP calculations to confirm accurate sensitivities generated by the CE CLUTCH methods in TSUNAMI-3D for a particular benchmark experiment. A companion paper provides a similar case study applying the MG TSUNAMI capability to the same critical experiment. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

The interpenetration polymer network in a cement paste–waterborne epoxy system

The formation of the interpenetrating polymer network (IPN) structure within the cement-polymer system has been revealed by experiments from 2 dimensional to 3-dimensional scales. However, the microstructure design and performance prediction of IPN as a function of specific C-S-H/polymer components or ingredients' parameters e.g. water to cement ratios (w/c), polymer to cement ratios (p/c), monomer components, degree of polymerization (DP), etc. is by far not available. Here we developed a mesoscale model for IPN visualization based on the Flory-Huggins interaction theory which was applied to cement science for the first time. All the ingredients in the micro-structure were considered as soluble beads with rational sizes based on their properties obtained by molecular dynamic methods. The interaction parameters of each bead were then determined based on their element ratios and chemical backbones. The model was validated with the waterborne epoxy-cement material (WECM) in which a novel waterborne epoxy resin (WEP) was prepared and impregnated. The verification results on the 2D-3D scale show that the developed model predicts the WECM's IPN structures by rule and line concerning DP, w/c, and p/c in the mixture. The C-S-H beads were progressively scaled in size which alters the C-S-H texture to have completely different dissolution characteristics. Beads of diameter ~6 Å are more unstable and soluble which enable them to form a continuous phase in water or a composite structure with WEP. In contrast, beads with diameters larger than 10 Å have different properties with stronger nucleation effects. The results also suggest the impregnation content of WEP in cement-based material should be limited to 10% vol. to prevent the polymer IPN from decomposing into discrete clusters. The application of Flory-Huggins theory in cement-based composites demonstrates great potential in performance prediction and microstructure design.

36 MATERIALS SCIENCE↗

Enhancing the connection between computation and experiments in electrocatalysis

Combining computational and experimental methods is a powerful approach to understand the variables that govern catalyst performance and ultimately design improved materials. However, the effectiveness of this approach rests on the strength of the relationships between calculated parameters and experimental measurements. These relationships are complicated by the intricacy and dynamic behaviour of catalytic active sites, and by the non-trivial relationship between calculated reaction energetics and observed rates. In this Perspective, we highlight opportunities to enhance the connection between computation and experiment in electrocatalysis. These include measuring the intrinsic kinetic behaviour of catalysts, creating precise models for the active site and its environment, and forming clear relationships between calculated reaction energetics and observed rates. As experimental and computational methods continue to become more powerful, clear connections between the two will maximize their utility to guide the design of efficient and selective electrocatalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The STRong lensing Insights into the Dark Energy Survey (STRIDES) 2016 follow-up campaign – I. Overview and classification of candidates selected by two techniques

Here, the primary goals of the STRong lensing Insights into the Dark Energy Survey (STRIDES) collaboration are to measure the dark energy equation of state parameter and the free streaming length of dark matter. To this aim, STRIDES is discovering strongly lensed quasars in the imaging data of the Dark Energy Survey and following them up to measure time delays, high resolution imaging, and spectroscopy sufficient to construct accurate lens models. In this paper, we first present forecasts for STRIDES. Then, we describe the STRIDES classification scheme, and give an overview of the Fall 2016 follow-up campaign. We continue by detailing the results of two selection methods, the Outlier Selection Technique and a morphological algorithm, and presenting lens models of a system, which could possibly be a lensed quasar in an unusual configuration. We conclude with the summary statistics of the Fall 2016 campaign. Including searches presented in companion papers (Anguita et al.; Ostrovski et al.), STRIDES followed up 117 targets identifying 7 new strongly lensed systems, and 7 nearly identical quasars (NIQs), which could be confirmed as lenses by the detection of the lens galaxy. 76 candidates were rejected and 27 remain otherwise inconclusive, for a success rate in the range 6-35\%. This rate is comparable to that of previous searches like SQLS even though the parent dataset of STRIDES is purely photometric and our selection of candidates cannot rely on spectroscopic information.

79 ASTRONOMY AND ASTROPHYSICS↗

Overview of a Methodology for Calculating the A Priori Scan Minimum Detectable Concentration for Post-Processed Radiological Surveys (Final Report) (Rev.1)

Increased continuous data collection using automated data loggers and autonomous radiological survey devices or vehicles has introduced a need for corresponding guidance and statistical techniques for data that are collected without surveyor vigilance. This report presents a method for calculating the a priori scan minimum detectable concentrations (MDCs) for surveys performed without vigilance similar to methods described in the Multi-Agency Radiation Survey and Site Investigation Manual, NUREG-1507, and NUREG/CR-6364. A priori scan MDCs are calculated during survey planning to ensure that survey parameters (e.g., scanning speed, scanning altitude, detector geometry) will lead to collecting data in which potentially contaminated areas can be detected when data are processed after the survey, within acceptable statistical error probabilities.

54 ENVIRONMENTAL SCIENCES↗

Overlapping local/global iteration framework for whole-core transport solution

In current practice of reactor design analysis, whole-core diffusion nodal method is used in which nodal parameters are provided by single-assembly lattice physics calculation with net current zero boundary condition. Thus, the whole-core solution is not transport, because the inter-assembly transport effect is not incorporated. In this paper, the overlapping local/global iteration framework is described that removes the limitation of the current method. It consists of two-level iterative computations: half-node overlapping local problems embedded in a global problem. The local problem can employ fine-group deterministic or continuous-energy stochastic (Monte Carlo) transport methods, while the global problem is an equivalent coarse-group transport model based on p-CMFD methodology. The method is tested on several highly heterogeneous multi-slab problems with encouraging results. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Advanced Solution Methods for Microkinetic Models of Catalytic Reactions: A Methanol Synthesis Case Study

Microkinetic models, combined with experimentally measured reaction rates and orders, play a key role in elucidating detailed reaction mechanisms in heterogeneous catalysis and have typically been solved as systems of ordinary differential equations. In this work, we demonstrate a new approach to fitting those models to experimental data. For the specific example treated here, by reformulating a typical microkinetic model for a continuous stirred tank reactor to a system of nonlinear equations, we achieved a 1000-fold increase in solution speed. The reduced computational cost allows a more systematic search of the parameter space, leading to better fits to the available experimental data. We applied this approach to the problem of methanol synthesis by CO/CO2 hydrogenation over a supported-Cu catalyst, an important catalytic reaction with a large industrial interest and potential for large-scale CO2 chemical fixation.

Environmental Molecular Sciences Laboratory↗