SEARCH · Search NASA

Results for “part”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28

All sources NASA NTRS DOE OSTI

NASA NTRS2021

An Overview of Atmospheric Features Over the Western North Atlantic Ocean and North American East Coast – Part 2: Circulation, Boundary Layer, and Clouds

The Western North Atlantic Ocean (WNAO) is a complex land-ocean-atmosphere system that experiences a broad range of atmospheric phenomena, which in turn drive unique aerosol transport pathways, cloud morphologies, and boundary layer variability. This work, Part 2 of a 2-part paper series, provides an overview of the atmospheric circulation, boundary layer variability, three-dimensional cloud structure, and precipitation over the WNAO; the companion paper (Part 1) focused on chemical characterization of aerosols, gases, and wet deposition.Seasonal changes in atmospheric circulation and sea surface temperature explain a clear transition in cloud morphologies from small shallow cumulus clouds, convective clouds, and tropical storms in summer, to stratus/stratocumulus and multi-layer cloud systems associated with winter storms. Synoptic variability in cloud fields is estimated using satellite-based weather states, and the role of postfrontal conditions (cold-air outbreaks) in the development of stratiform clouds is further analyzed. Precipitation is persistent over the ocean, with a regional peak over the Gulf Stream path, where offshore sea surface temperature gradients are large and surface fluxes reach a regional peak. Satellite data show a clear annual cycle in cloud droplet number concentration with maxima (minima) along the coast in winter (summer), suggesting a marked annual cycle in aerosol-cloud interactions. Compared with satellite cloud retrievals, four climate models qualitatively reproduce the annual cycle in cloud cover and liquid water path, but with large discrepancies across models, especially in the extra-tropics. The paper concludes with a summary of outstanding issues and recommendations for future work.

David Painemal↗

NASA NTRS2022

An Overview of Atmospheric Features Over the Western North Atlantic Ocean and North American East Coast – Part 1: Analysis of Aerosols, Gases, and Wet Deposition Chemistry

The Western North Atlantic Ocean (WNAO) and adjoining East Coast of North America are of great importance for atmospheric research and have been extensively studied for several decades. This broad region exhibits complex meteorological features and a wide range of conditions associated with gas and particulate species from many sources regionally and other continents. As Part 1 of a 2‐part paper series, this work characterizes quantities associated with atmospheric chemistry, including gases, aerosols, and wet deposition, by analyzing available satellite observations, ground‐based data, model simulations, and reanalysis products. Part 2 provides insight into the atmospheric circulation, boundary layer variability, three‐dimensional cloud structure, properties, and precipitation over the WNAO domain. Key results include spatial and seasonal differences in composition along the North American East Coast and over the WNAO associated with varying sources of smoke and dust and meteorological drivers such as temperature, moisture, and precipitation. Spatial and seasonal variations of tropospheric carbon monoxide and ozone highlight different pathways towards the accumulation of these species in the troposphere. Spatial distributions of speciated aerosol optical depth and vertical profiles of aerosol mass mixing ratios show a clear seasonal cycle highlighting the influence of different sources in addition to the impact of intercontinental transport. Analysis of long‐term climate model simulations of aerosol species and satellite observations of carbon monoxide confirm that there has been a significant decline in recent decades among anthropogenic constituents owing to regulatory activities.

ACTIVATE↗

NASA NTRS2022

The TRAPPIST-1 Habitable Atmosphere Intercomparison (THAI). Part III: Simulated Observables - The Return of the Spectrum

The TRAPPIST-1 Habitable Atmosphere Intercomparison (THAI) is a community project that aims to quantify how differences in general circulation models (GCMs) could impact the climate prediction for TRAPPIST-le and, subsequently its atmospheric characterization in transit. Four GCMs have participated in THAI so far: ExoCAM, LMD-Generic, ROCKE-3D and the UM. This paper, focused on the simulated observations, is the third part of a trilogy, following the analysis of two land planet scenarios (part I) and two aquaplanet scenarios (part II). Here, we show a robust agreement between the simulated spectra and the number of transits estimated to detect the land planet atmospheres. For the cloudy aquaplanet ones, a 5-σ detection of CO2 could be achieved in about 10 transits if the atmosphere contains at least 1 bar of CO2. That number can vary by 41- 56% depending on the GCM used to predict the terminator profiles, principally due to differences in the cloud deck altitude, with ExoCAM and LMD-G producing higher clouds than ROCKE-3D and UM. Therefore, for the first time, this work provides "GCM uncertainty error bars" of ~ 50% that need to be considered in future analyses of transmission spectra. We also analyzed the inter-transit variability induced by weather patterns and changes of terminator cloudiness between transits. Its magnitude differs significantly between the GCMs but its impact on the transmission spectra is within the measurement uncertainties. THAI has demonstrated the importance of model intercomparison for exoplanets and also paved the way for a larger project to develop an intercomparison meta-framework, namely the Climates Using Interactive Suites of Intercomparisons Nested for Exoplanet Studies (CUISINES).

Exoplanet atmospheres↗

NASA NTRS2023

Guidelines for Determining X-ray Shots for Inspection of Cylindrical Parts

For reliable detection of Standard size crack for x-ray radiography, NASA-STD-5009 requires that x-ray angle shall be within +/-5 deg. of assumed crack plane at the point of x-ray intersection with crack. Equations for calculation of shot length and number of shots on a girth weld of a cylindrical part are provided to meet this requirement for selected cases of x-ray set-ups. Crack plane is assumed to be radial-axial with respect to the part geometry. Limit angles other than +/-5 deg. may be chosen. These equations can be used to interpret limit x-ray angle requirements to calculate corresponding shot length and number of shots on a cylindrical part. If certain percent (5-10%) overlap is needed, then the limit angle used in the calculations should be decreased by that percentage so that the overlap area meets the limit angle requirements.

Ajay M Koshti↗

NASA NTRSDate not supplied

Joining Composite Parts With Off-Stoichiometric Matrix Reflow

Adhesive bonding is an attractive alternative to fasteners for composite part assembly. In addition to superior performance, it reduces weight and eliminates costly manufacturing processes. However, current adhesive bonding methods are highly susceptible to contamination flaws, and it is difficult to verify bonds because nondestructive testing to quantify bond strength is still under development. In aerospace applications, this often results in fasteners being added to provide redundant load paths. Co-cured parts can provide an alternative because they can be inspected using traditional nondestructive evaluation techniques such as ultrasound. However, co-curing can only be accomplished for a limited range of geometries. NASA’s Adhesive Free Bonding of Composites (AERoBOND) is an alternative method for bonding composite parts. The goal of this study was to further develop and understand the capabilities of this novel bonding technique.

Charles T. Dolph↗

NASA NTRSDate not supplied

BioSentinel Avionics Design Approach with COTS Parts

This presentation focuses on ARC's avionics design approach using Commercial Off-The-Shelf (COTS) parts for high-risk, high-reward missions. Examples of ARC's past missions in small spacecraft, nano-satellites, and Class D payloads are highlighted, emphasizing the benefits of COTS, such as wider selections, faster development schedules, and lower costs. The challenges and limitations of traditional Qualified Parts List (QPL) approaches are discussed, along with observations from ARC missions, which show that design and workmanship issues are more significant than component failures. Mitigations for radiation risks associated with COTS are proposed, emphasizing risk awareness, proper software and hardware design, and careful parts selection. The success of ARC's 30+ projects using COTS over the past 17 years underscores its viability for high-risk missions.

BioSentinel↗

NASA NTRSDate not supplied

NASA HECC Geometry and Performance Review Part 1: Validation of a Computational Model for the Vaneless Diffuser Configuration with As-Manufactured Impeller Geometry

An investigation of the NASA High Efficiency Centrifugal Compressor (HECC) vaneless diffuser configuration was performed. This multipart investigation focused on validating the computational model against experimental data. The validated model was then used to explore the effects of observed geometric differences between the as-manufactured and design-intent impellers. Lastly, the validated model was used for comparison against an experimental tip clearance study. Details regarding each of the parts are detailed below: A multipart investigation of the NASA High Efficiency Centrifugal Compressor (HECC) vaneless diffuser configuration was performed. Part I of the investigation focused on describing the HECC vaneless computational model and its validation against the experimental data published in GT2023-103128. To generate the model, a verification of the manufactured impeller was performed and was confirmed to match the impeller CAD. Section data from the impeller CAD, referred to as As-Manufactured, were used in the model. Steady RANS simulations using a multiblock structured mesh were used to conduct a mesh convergence study. The resultant mesh was then used for simulations at both design-speed and off-design speed conditions. The simulations compared well to data in both 1D and 2D terms. Based on the observed results the model was deemed validated and was used in the latter two parts of the multipart investigation.

centrifugal compressor↗

NASA NTRSDate not supplied

NASA HECC Geometry and Performance Review Part 2: Geometric Differences Between the as-Manufactured and Design-Intent Impeller Geometry and Their Effects on the Vaneless Diffuser Configuration Performance

An investigation of the NASA High Efficiency Centrifugal Compressor (HECC) vaneless diffuser configuration was performed. This multipart investigation focused on validating the computational model against experimental data. The validated model was then used to explore the effects of observed geometric differences between the as-manufactured and design-intent impellers. Lastly, the validated model was used for comparison against an experimental tip clearance study. Details regarding each of the parts are detailed below: This second part of a multipart investigation of the NASA HECC vaneless diffuser configuration focused on the comparison of the as-manufactured HECC vaneless computational model validated in Part I against a new model that used the same grid and solver settings but replaced the impeller section data with the design-intent sections from NASA/CR-2014-218114/Rev1. The 1D performance values showed that the as-manufactured impeller underperformed compared to the design-intent for all four speedlines that were simulated. Further investigation of radial profiles, loading and contours showed consistent underperformance of the as-manufactured. An investigation into the source of the difference led to the discovery of several geometric differences in the two impellers of magnitudes that could not be explained outside of manufacturing. The differences that were observed can be summarized into four categories: fillets, TE exit radius differences, splitter LE differences and main blade thickness differences. The investigation then shifted to attempting to isolate the geometric differences as best as possible and to understand their contribution to the observed underperformance. The investigation showed that out of the four geometric differences that were explored, the differences in the splitter blade had the largest effect.

centrifugal compressor↗

DOE OSTI2024

Towards in-situ certification of additively manufactured parts: the vital roles of physics-based and data-driven models

Certifying additively manufactured (AM) parts in-situ at the completion of a build is an enticing prospect, as it can help reduce the high costs associated with post-build testing and evaluation. However, achieving this goal presents significant challenges that may keep it aspirational for the foreseeable future. Nonetheless, incremental progress can pave the way forward. A critical aspect of in-situ certification involves continuous quality checking due to the random nature of the AM process and the difficulties in detecting defects or anomalies once layers are built over. While real-time in-situ monitoring strategies assisted by machine learning (ML) play a pivotal role in auditing part quality, they must ideally be supported by real-time (or near real-time) adaptive process control enabled by ML-assisted decision-making. By analyzing in-situ monitoring data in real-time (or near real- time) to dynamically adjust manufacturing parameters, such intervention can ensure AM parts are built to meet stringent certification standards. This can be achieved virtually by using high-fidelity performance models for the physical testing and evaluation tasks. In this short editorial, we discuss the key contributions made by data-driven and physics-based models in providing intelligence to the monitoring and process control tasks underpinning in-situ certification and in the simulation of the build’s performance under test and service conditions. While our focus lies in metal AM, the concepts discussed here are also relevant to other AM processes.

: In-situ monitoring↗

NASA NTRS2012

NASA Electronic Parts and Packaging (NEPP) Program

Recent Findings from Audits, New Technology Data Reviews a) Disabled Chip Burn-ins A recent audit for a QML device discovered that the chip was disabled during the static burn-in, thus it was not drawing any current. Recommendation: For new SMDs add a statement within the burn-in paragraphs stating that the parts shall be kept in their enabled state during the burn-in. b) Class Q 160-hr/125oC Burn-in This is being interpreted as a static burn-in (even for CMOS technology). Recommendation: Provide clarification in MIL-STD-883, Test Method 5004. c) At Frequency (Dynamic) Burn-ins Test equipment limitation is being cited for not doing burn-ins at the application frequency. Recommendation: The burn-in task group to discuss and provide guidance. When the SMD says that the part can be used at 200 MHz, then doing burn-in at 6 MHz (cited as burn-in equipment limitation frequency) is not going to be meaningful! d) Two Static Burn-ins Some manufacturers are doing electrical testing between the two static burn-ins, whereas others do electricals after completing both static burn-ins. Recommendation: Provide clarification in MIL-STD-883, Test Method 5004. e) Thermal Imaging For a device with hot spots, the thermal resistance, junction-to-case, would be much higher than the guidelines given in MIL-STD-1835. One of the suppliers used thermal imaging to find hot spots on the die. Recommendation: Assign a task group to evaluate the effectiveness of thermal imaging at the product development stage.

Class Y↗

NASA NTRS2016

The NASA Electronic Parts and Packaging (NEPP) Program - Presentation to Korean Aerospace Research Institute

This presentation will provide basic information about NASA's Electronic Parts and Packaging Program (NEPP), for sharing with representatives of the South Korean Aerospace Research Institute (KARI) as part of a larger presentation by Headquarters Office of Safety and Mission Assurance. The NEPP information includes mission and goals, history of the program, basic focus areas, strategies, deliverables and some examples of current tasks.

Technology Challenges↗

NASA NTRS2019

NASA Electronic Parts and Packaging (NEPP) Program Status and Technology Investments Overview

Overview of agency-level electronic parts management, the NASA Electronic Parts and Packaging (NEPP) Program, and NEPP Program Fiscal Year 2019 task investment areas.

electronic parts reliability↗

NASA NTRSDate not supplied

A New, Cots-Inclusive, Approach for Parts Assurance in NASA

This talk will provide insights into new options for parts assurance that are being introduced into NASA policy, which build on the results of the NASA Engineering and Safety Center (NESC) COTS Phase 2 study. It will provide some of the highlights and drivers for the use of COTS and brief recommendations for how to successfully select and use COTS parts.

risk↗

NASA NTRSDate not supplied

New COTS-Inclusive Parts Assurance in NASA

risk↗

DOE OSTI2022

Quantification of Rare Earth Elements in the Parts Per Million Range: A Novel Approach in the Application of Laser-Induced Breakdown Spectroscopy

This work extends a previous percentage level concentration study of the optical emission spectra for six rare earth elements, europium (Eu), gadolinium (Gd), lanthanum (La), praseodymium (Pr), neodymium (Nd), and samarium (Sm), along with the transition metal, yttrium (Y) using laser-induced breakdown spectroscopy (LIBS). The concentration of these six rare earth elements and yttrium has been attempted for the first time systematically down to parts per million (ppm) concentration levels ranging from 30 to 300 ppm. In this study, the authors have developed multivariate models for each element capable of predicting concentration with acceptable to excellent levels of accuracy. Additionally, partial least squares regression coefficients were used to identify key spectral features able to be used in this lower concentration regime. This study has demonstrated that it is conceivable to quantify the six rare earth elements along with yttrium at low concentrations in the parts per million levels.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2025

Evaluation and Development of Phase Array Ultrasonic Testing (PAUT) System for Additively Manufactured Parts

This research focuses on the application of advanced ultrasonic testing techniques developed by The Phased Array Company (TPAC) for inspecting defects in additive manufacturing (AM) parts. Traditionally, X-ray computed tomography is the standard for inspecting AM components. Although, the long inspection and analysis time, along with relatively high cost make implementation difficult. Thus, an alternative nondestructive evaluation (NDE) approach is necessary to support quality assurance efforts within the field of AM. TPAC is recognized as a leader in ultrasonic testing innovation, deploying sophisticated algorithms such as Total Focusing Method (TFM) and Phased Wave Imaging (PWI) for ultrasonic data processing and interpretation. This work will explore how the TFM and PWI algorithms can assist defect detection within polymer AM parts. The AM field is seeking novel NDE methods to provide support within quality control and assurance efforts. Advanced ultrasonics inspection have the potential to fulfill this need.

99 GENERAL AND MISCELLANEOUS↗

NASA NTRS2001

Utilizing off-the-shelf parts for the next generation of space exploration

Unscreened commercial, off-the-shelf (COTS) parts, in space applications are especially encouraging when the possibility of capitalizing on the extensive development for high-volume consumer applications is considered. Other applications for MMIC parts in space could possibly open new doors in the future.

off-the-shelf parts spacecraft components↗

NASA NTRS2015

NASA EEE Parts 2014 Year in Review

The NASA Electronic Parts and Packaging Program continue to support Electrical, Electronic and Electromagnetic Parts for the agency with an eventful year of workshops, innovations, testing and challenges.

electronic↗