Search NASA⌕ Search

SEARCH · Search NASA

Results for “particle evolution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

An Analysis of the Impact of Particle Growth on Transport Losses in Polymer-Electrolyte Fuel Cells

Voltage cycling causes catalyst nanoparticles in polymer-electrolyte fuel cells to grow. The concomitant loss of interfacial area results in larger kinetic, transport, and possibly ohmic overpotentials. This paper uses recently published experimental data and mathematical models to investigate the evolutions of transport and ohmic resistances to platinum nanoparticles located on the surface and inside the micropores of carbon black supports. Resistance to oxygen transport rises as surface area declines primarily because the flux to each remaining larger platinum particle increases. The path lengths governing oxygen diffusion to surface and buried platinum sites also increase as nanoparticles grow. Platinum nanoparticles on the surface become relatively less favorable as voltage cycling proceeds because they grow faster than platinum in micropores. Because voltage cycling causes total interfacial area to decline, and the fraction located inside micropores to increase, nanoscale ohmic losses increase as a catalyst layer decays. The practical importance of this effect is difficult to discern because proton conductivity in carbon micropores is not well characterized.

07 ISOTOPE AND RADIATION SOURCES↗
DOE OSTI2025

Collision-Energy Dependence in Heavy-Ion Collisions from Nonlinear QCD Evolution

We explore the effects of including the energy dependence determined from evolution equations within the color glass condensate framework on observables in ultrarelativistic heavy-ion collisions. This amounts to integrating the JIMWLK evolution equations into the impact parameter-dependent glasma model, which is then coupled to viscous relativistic hydrodynamics. This methodology allows for a systematic representation of nuclei at specific Bjorken-x values, which are probed at different center-of-mass energies of the collision and rapidities of final state particles. Comparing the methodology to the conventional impact parameter-dependent glasma model, we find significant effects on multiplicity distributions and particle spectra, especially in smaller collision systems at the highest center-of-mass energies. Our results highlight the importance of incorporating nonlinear QCD evolution in the description of heavy-ion collisions at varying center-of-mass energies, as the precise extraction of transport coefficients will be affected. This Letter establishes a robust framework for understanding the quark gluon plasma and nuclear structure at high energy, integrating small-x physics into the initial conditions of heavy-ion collisions.

Mäntysaari, Heikki↗
DOE OSTI2024

Multiwavelength Afterglow Analysis of GRB 221009A: Unveiling the Evolution of a Cooling Break in a Wind-like Medium

Gamma-ray bursts (GRBs) are the most energetic explosions in the Universe, and their afterglow emission provides an opportunity to probe the physics of relativistic shock waves in an extreme environment. Several key pieces for completing the picture of GRB afterglow physics are still missing, including jet properties, the emission mechanism, and particle acceleration. Here, we present a study of the afterglow emission of GRB 221009A, the most energetic GRB ever observed. Using optical, X-ray, and gamma-ray data up to approximately 2 days after the trigger, we trace the evolution of the multiwavelength spectrum and the physical parameters behind the emission process. The broadband spectrum is consistent with the synchrotron emission emitted by relativistic electrons with its index of p = 2.29 ± 0.02. We identify a break energy at keV and an exponential cutoff at GeV in the observed multiwavelength spectrum. The break energy increases in time from $16.0^{+7.1}_{-4.9}$ keV at 0.65 days to $46.8^{+25.0}_{-15.5}$ keV at 1.68 days, favoring a stellar-wind-like profile of the circumburst medium with k = 2.4 ± 0.1 as in ρ(r) ∝ r -k . The high-energy attenuation at around 0.4 to 4 GeV is attributed to the maximum of the particle acceleration in the relativistic shock wave. This study confirms that the synchrotron process can explain the multiwavelength afterglow emission and its evolution.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

Target Affinity and Structural Analysis for a Selection of Norovirus Aptamers

Aptamers, single-stranded oligonucleotides that specifically bind a molecule with high affinity, are used as ligands in analytical and therapeutic applications. For the foodborne pathogen norovirus, multiple aptamers exist but have not been thoroughly characterized. Consequently, there is little research on aptamer-mediated assay development. This study characterized seven previously described norovirus aptamers for target affinity, structure, and potential use in extraction and detection assays. Norovirus-aptamer affinities were determined by filter retention assays using norovirus genotype (G) I.1, GI.7, GII.3, GII.4 New Orleans and GII.4 Sydney virus-like particles. Of the seven aptamers characterized, equilibrium dissociation constants for GI.7, GII.3, GII.4 New Orleans and GII.4 Sydney ranged from 71 ± 38 to 1777 ± 1021 nM. Four aptamers exhibited affinity to norovirus GII.4 strains; three aptamers additionally exhibited affinity toward GII.3 and GI.7. Aptamer affinity towards GI.1 was not observed. Aptamer structure analysis by circular dichroism (CD) spectroscopy showed that six aptamers exhibit B-DNA structure, and one aptamer displays parallel/antiparallel G-quadruplex hybrid structure. CD studies also showed that biotinylated aptamer structures were unchanged from non-biotinylated aptamers. Finally, norovirus aptamer assay feasibility was demonstrated in dot-blot and pull-down assays. This characterization of existing aptamers provides a knowledge base for future aptamer-based norovirus detection and extraction assay development and aptamer modification.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2024

Long-term Evolution of Relativistic Unmagnetized Collisionless Shocks

Abstract We study a relativistic collisionless electron–positron shock propagating into an unmagnetized ambient medium using 2D particle-in-cell simulations of unprecedented duration and size. The shock generates intermittent magnetic structures of increasingly larger size as the simulation progresses. Toward the end of our simulation, at around 26,000 plasma times, the magnetic coherence scale approaches λ ∼ 100 plasma skin depths, both ahead and behind the shock front. We anticipate a continued growth of λ beyond the time span of our simulation, as long as the shock accelerates particles to increasingly higher energies. The post-shock field is concentrated in localized patches, which maintain a local magnetic energy fraction ε B ∼ 0.1. Particles randomly sampling the downstream fields spend most of their time in low field regions ( ε B ≪ 0.1) but emit a large fraction of the synchrotron power in the localized patches with strong fields ( ε B ∼ 0.1). Our results have important implications for models of gamma-ray burst afterglows.

Astronomy & Astrophysics↗
DOE OSTI2020

Modeling of the ECCD injection effect on the Heliotron J and LHD plasma stability

The aim of the study is to analyze the stability of the energetic particle modes (EPM) and Alfven Eigenmodes (AE) in Helitron J and LHD plasma if the electron cyclotron current drive (ECCD) is applied. Additionally, the analysis is performed using the code FAR3d that solves the reduced MHD equations describing the linear evolution of the poloidal flux and the toroidal component of the vorticity in a full 3D system, coupled with equations of density and parallel velocity moments for the energetic particle (EP) species, including the effect of the acoustic modes. The Landau damping and resonant destabilization effects are added via the closure relation. The simulation results show that the n = 1 EPM and n = 2 global AE (GAE) in Heliotron J plasma can be stabilized if the magnetic shear is enhanced at the plasma periphery by an increase (co-ECCD injection) or decrease (ctr-ECCD injection) of the rotational transform at the magnetic axis ($\rlap{-} \iota_{0}$). In the ctr-ECCD simulations, the EPM/AE growth rate decreases only below a given $\rlap{-} \iota_{0}$, similar to the ECCD intensity threshold observed in the experiments. In addition, ctr-ECCD simulations show an enhancement of the continuum damping. The simulations of the LHD discharges with ctr-ECCD injection indicate the stabilization of the n = 1 EPM, n = 2 toroidal AE (TAE) and n = 3 TAE, caused by an enhancement of the continuum damping in the inner plasma leading to a higher EP β threshold with respect to the co- and no-ECCD simulations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

A kinetic model for pure electron plasma compression via the rotating wall technique

An approximate model for pure electron plasma compression is developed for the case where the rotating wall (RW) electric field couples to the ${E}\times{B}$rotation and axial bounce motion of the electrons. The key assumption in the model is that, throughout the compression, the plasma remains in a slowly evolving thermal equilibrium defined by the plasma temperature and angular momentum. Linearized drift kinetic theory is employed to derive an expression for torque exerted by the RW field on the plasma through coupling to the resonant plasma particles, and averaging is used to find the torque that both compresses and heats the plasma. The evolution equations for the angular velocity and temperature of the plasma include the compression and heating from the torque and cooling from cyclotron radiation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Conditioning the Surface and Bulk of High-Nickel Cathodes with a Nb Coating: An In Situ X-ray Study

Surface coating is commonly employed by industries to improve the cycling and thermal stability of high-nickel (Ni) transition metal (TM) layered cathodes for their practical use in lithium-ion batteries. Niobium (Nb) coating or substitution has been shown to be effective in stabilizing LiNi 0.8 Mn 0.1 Co 0.1 O 2 (NMC811) cathodes; in addition, the electrochemical performance of the final products varies depending on the postprocessing. In this follow-up study, we use in situ synchrotron X-ray diffraction to investigate the kinetic processes and the involved structural evolution in Nb-coated NMC811 upon heat treatment. Furthermore, quantitative structure analysis reveals thermally driven concurrent changes in the bulk and surface, in particular, the phase evolution of the coating layer and Nb/TM interdiffusion that facilitates penetration of Nb into the bulk and particle growth at the increased temperatures. Findings from this study highlight the new opportunities for the intended control of the structure and surface properties of high-Ni cathodes through surface coating in conjunction with postprocessing.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Kinetic modeling of solitary wave dynamics in a neutralizing ion beam

In this work, we characterize the formation and evolution of electrostatic solitary waves (ESWs) in the space-charge neutralization of ion beams using particle-in-cell simulations. These waves become excited when the electrons emitted from an external filament source initiate a two-stream instability in the beam. We show that such electrostatic waves become excited in both two-dimensional (2D) and three-dimensional (3D) beams with different shapes and sizes. Through a 1D Bernstein–Greene–Kruskal (BGK) analysis of the 2D beam, we find that the non-Maxwellian nature of the beam electrons gives rise to large-sized ESWs that are not predicted by BGK theory since it assumes a Maxwellian electron velocity distribution in the beam. Finally, we show that a 1D BGK theory is inadequate to describe ESWs in 3D beams because of complex electron trajectories.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

The effect of pellet injection on turbulent transport in TJ-II

An improvement in confinement associated with the injection of pellets has been observed in TJ-II and other devices. By means of a simple model, we study here the modification of turbulent transport by the injection of pellets in TJ-II and how this modification affects the particle confinement time. The analysis of the results shows the relationship of the confinement improvement with the evolution of the shear flow due to turbulence, especially near low order rational surfaces. This work is based on pellet injections into the neutral beam injection heated phase of TJ-II plasmas. For this, single, double, or triple hydrogen pellet injection are considered and the post-injection evolution of selected plasma parameters are analyzed and compared.

Physics↗
DOE OSTI2026

Simulation of electron Bernstein waves using FullWave with a 2D non-local hot plasma model

Hot plasma wave simulation capability is expanded in the FullWave code by updating the hybrid iterative solver in the code with a semi-implicit time stepping method. The new approach is used to simulate Electron Bernstein Wave (EBW) heating in over-dense spherical tokamak plasmas. The code’s hybrid iterative solver circumvents the prohibitive memory cost of direct methods by combining a time evolution of Maxwell’s equations with frequency-domain relaxation, while the conductivity kernel, calculated via 3D particle tracking, captures the essential non-local wave–particle interactions. One-dimensional EBW simulations verify the algorithm’s accuracy by demonstrating mode conversion from X-mode wave to EBW at the upper hybrid resonance and a strong cyclotron damping near the plasma core. Two-dimensional simulation reproduces the predicted short EBW wavelength and quantitatively matches the hot-plasma dispersion relation. This study demonstrates the fidelity of the hybrid solver for the electron cyclotron frequency range.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Interplay of femtoscopic and charge-balance correlations

Correlations driven by the constraints of local charge conservation have been shown to provide insight into the chemical evolution and diffusivity of the high-temperature matter created in ultrarelativistic heavy ion collisions. Two-particle correlations driven by final-state interactions have allowed the extraction of critical femtoscopic space-time information about the expansion and dissolution of the same collisions. Whereas correlations from final-state interactions mainly appear at small relative momenta, a few tens of MeV/c, charge-balance correlations extend over a range of hundreds of MeV/c. In nearly all previous analyses, this separation of scales is used to focus solely on one class or the other. So the purpose of this study is to quantitatively understand the degree to which correlations from final-state interactions distort the interpretation of charge-balance correlations and vice versa.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2024

Collective modes of excitation in 64 Cu

Medium and high-spin level sequences in 64 Cu were investigated using the complex 26 Mg( 48 Ca, αp5nγ ) multinucleon transfer reaction. The experiment was performed at the ATLAS accelerator facility at the Argonne National Laboratory using the Gammasphere array and the fragment mass analyzer (FMA). Two high-spin, quasirotational bands consisting of stretched-E2 transitions were observed in coincidence with the known low-spin structure for the first time. These bands share remarkable similarities with highly deformed and/or superdeformed bands observed in the A ≈ 60–70 mass region. In addition, a regular dipole sequence with weak E2 crossover transitions was observed. A general discussion of the observed structures, complemented by theoretical calculations carried out within the framework of the adiabatic and configuration-fixed constrained covariant density functional theory and the quantum particle-rotor model, are presented. Furthermore, the results are interpreted in the context of shell-structure evolution and the collectivity in the mass region.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2022

FFT-based model for irradiated aggregate microstructures in concrete

The concrete biological shield of light water reactors is exposed to neutron and gamma irradiation throughout its lifetime, which results in the long-term degradation of the concrete’s mechanical properties. Under neutron irradiation, the concrete’s aggregates are subjected to radiation-induced volumetric expansion (RIVE), which strongly depends on the mineral content of the aggregate and exhibits the largest expansion in silicate-bearing minerals. In this work, the authors used the fast Fourier transform-based code Microstructure-Oriented Scientific Analysis of Irradiated Concrete (MOSAIC) in 2D to model the expansion of five different aggregates provided by the Japan Concrete Aging Management Program (JCAMP). Comparable rock specimens were irradiated at the JEEP-II test reactor. The model uses realistic aggregate microstructure reconstruction based on high-resolution characterization images. The model accounts for anisotropic RIVE, thermal expansion, and the associated initiation and propagation of damage. The RIVE models are calibrated based on expansion data in the literature. The authors assume that damage occurs exclusively at interfaces between the particles that compose an aggregate and that these interfaces also exhibit swelling. Using a micromechanical model, the evolution of Young’s modulus with RIVE is calculated for each aggregate and compared with Russian irradiation data. The modeled linear expansion agrees well with the experimentally measured expansion. Furthermore, the model also predicts that anisotropic RIVE and thermal expansion result in an earlier onset of damage with neutron fluence than in the isotropic case.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Modeling Dust Production, Growth, and Destruction in Reionization-era Galaxies with the CROC Simulations: Methods and Parameter Exploration

We introduce a model for the explicit evolution of interstellar dust in a cosmological galaxy formation simulation. We post-process a simulation from the Cosmic Reionization on Computers project, integrating an ordinary differential equation for the evolution of the dust-to-gas ratio along pathlines in the simulation sampled with a tracer particle technique. This model incorporates the effects of dust grain production in asymptotic giant branch star winds and supernovae, grain growth due to the accretion of heavy elements from the gas phase of the interstellar medium, and grain destruction due to thermal sputtering in the high-temperature gas of supernova remnants due to thermal sputtering. A main conclusion of our analysis is the importance of a carefully chosen dust destruction model, for which different reasonable parameterizations can predict very different values at the ∼100 pc resolution of the interstellar medium (ISM) in our simulations. We run this dust model on the single most massive galaxy in a 10 h$^{−1}$ comoving megaparsec box, which attains a stellar mass of ∼2 × 10$^{9}$ M $_{⊙}$ by z = 5. We find that the model is capable of reproducing dust masses and dust-sensitive observable quantities broadly consistent with existing data from high-redshift galaxies. The total dust mass in the simulated galaxy is somewhat sensitive to parameter choices for the dust model, especially the timescale for grain growth due to accretion in the ISM. Consequently, observable quantity observations that can constrain galaxy dust masses at these epochs are potentially useful for placing constraints on dust physics.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2023

Particle size distributions from TRACER-UFI

Particle size distributions using a custom-built SMPS. The measurements were made at the AMF-1 site in La Porte, TX between July 15, 2022 and August 30, 2022. The SMPS alternated between sampling ambient air and that in the portable Captive Aerosol Growth and Evolution (CAGE) chamber. The distributions from those two sources are separated.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Test for the Origin of Solar Mass Black Holes

Solar-mass black holes with masses in the range of ~1–2.5 M ⊙ are not expected from conventional stellar evolution, but can be produced naturally via neutron star (NS) implosions induced by capture of small primordial black holes (PBHs) or from accumulation of some varieties of particle dark matter. We argue that a unique signature of such “transmuted” solar-mass BHs is that their mass distribution would follow that of the NSs. This would be distinct from the mass function of black holes in the solar-mass range predicted either by conventional stellar evolution or early Universe PBH production. We propose that analysis of the solar-mass BH population mass distribution in a narrow mass window of ~1–2.5 M ⊙ can provide a simple yet powerful test of the origin of these BHs. Recent LIGO/VIRGO gravitational wave (GW) observations of the binary merger events GW190425 and GW190814 are consistent with a BH mass in the range ~1.5–2.6 M ⊙ . Though these results have fueled speculation on dark matter-transmuted solar-mass BHs, we demonstrate that it is unlikely that the origin of these particular events stems from NS implosions. Data from upcoming GW observations will be able to distinguish between solar-mass BHs and NSs with high confidence. This capability will facilitate and enhance the efficacy of our proposed test.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗