SEARCH · Search NASA

Results for “profiling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28

All sources NASA NTRS DOE OSTI

DOE OSTI2026

Improved method for temporally interpolating radiosonde profiles in the convective boundary layer

A significantly improved technique for temporally interpolating radiosonde (RS) profiles of potential temperature and water vapor mixing ratio in the planetary boundary layer during daytime is introduced. The key innovation of this technique is its operation on a height grid normalized with the planetary boundary layer height. This study utilized a three-month dataset of three-hourly soundings from the Atmospheric Radiation Measurement Facility's Southern Great Plains site. The technique was evaluated for convective boundary layer cases, with the necessary boundary layer height data obtained from a ground-based infrared spectrometer. A total of 79 comparisons were conducted between reference soundings and interpolated profiles that did and did not employ height normalization. The results demonstrated a substantial improvement in the representation of interpolated profiles using the new technique, characterized by enhanced correlation, improved amplitude representation, and reduced bias for potential temperature, as well as improved correlation and reduced bias for water vapor mixing ratio.

convective boundary layer↗

DOE OSTI2026

EVs@Scale: NextGen Profiles EVSE Characterization 2025

As part of the U.S. DOE EVs@Scale consortium, the Next-Generation Profiles (NextGen Profiles [NGP]) project presents analysis and results from the characterization of high-power conductive and wireless charging infrastructure. High Power Charging equipment is capable of recharging electric vehicle traction batteries at power levels of 200KW and above. Electric Vehicle Service Equipment (EVSE) characterization involves testing over a wide range of DC charging currents and voltages during nominal and off-nominal conditions. This testing allows for a better understanding of the impact that high-power charging will have on the electric grid. A common set of standard test plans, procedures, and data requirements were applied to the characterization in this document with minor updates and improvements. This report covers all conductive characterization activities performed between October 2024 and September 2025 on the Delta Electronics 350KW Electric Vehicle Charging System, consisting of power cabinet model EIDN-U350KTA01 and dispenser model EIDD-U350SSUUAEG-350.Key Findings include: Output regulation, Efficiency and power factor, Load management, Grid Resilience, Smart Charge Management (SCM) performance, Thermal control system performance, Multi-port simultaneous charging performance, and Selected performance comparisons with other EVSEs characterized in the NextGen Profiles project. Hot and cold temperature testing was not conducted on the Delta 350KW due to laboratory limitations. Future research could include continued testing the Delta hardware under off-nominal temperature conditions including multi-port/multi-session simultaneous charge testing, in addition to collecting data on other high-power conductive chargers to augment.

25 ENERGY STORAGE↗

DOE OSTI2025

SITCOMTN-164: AnaCal Shear Profile of Abell 360 in LSSTComCam Data Preview 1

This technote presents the measurement of the weak-lensing shear profile for the Abell 360 galaxy cluster using LSSTComCam data processed with the AnaCal pipeline. We detail the procedures involved in bright-star masking, source selection, and the estimation of tangential and cross shear around the cluster center. The resulting shear profiles provide key insights into the mass distribution of Abell 360 and demonstrate the capabilities of AnaCal in processing early LSST data, with the tangential shear profile detected at 5σ significance.

79 ASTRONOMY AND ASTROPHYSICS↗

NASA NTRS1971

The pressure and deformation profile between two colliding lubricated cylinders

The pressure and deformation profiles between two colliding lubricated cylinders are obtained by solving the coupled, time-dependent elastohydrodynamic equations with an iterative procedure. The analysis includes effects which were not considered in a previous solution, namely, the effect of the lubricant compressibility and the effect of a lubricant with composite pressure-viscosity coefficients. It is found that the local approach velocity plays an important role during final stages of normal approach. It causes the lubricant to be entrapped within the contact region; neither the pressure nor the deformation profile converges to the Hertzian profile for a dry contact. The use of a smaller pressure-viscosity coefficient at high pressures reduces the sharp pressure gradient at the center of the contact and produces a much milder variation of load with respect to the film thickness. The effect of compressibility of the lubricant is found to be relatively small.

Lee, K.↗

NASA NTRS1971

Absolute intensity calibrations of solar K line profiles

Individual K-line profiles from elements of fine structure on the surface of the sun are calibrated absolutely. The continuum calibrations of Labs and Neckel and of Houtgast and Namba are considered, and the average K-profile is scaled to that of White and Suemoto. The ranges of intensities across a high-resolution spectrogram are tabulated for various parts of the line profile. Although the spatially-averaged value for K3 of 4.2% of the continuum corresponds to a brightness temperature of 4155 deg K, minimum and maximum values were 3980 and 4360 K, respectively. Similarly, K2v ranges from 4200 to 4560 K, and K2r from 4180 to 4460 K in small elements about 1 arc sec across.

Pasachoff, J., M.↗

NASA NTRS1972

Effect of radiometric errors on accuracy of temperature-profile measurement by spectral scanning using absorption-emission pyrometry

The spectral-scanning method may be used to determine the temperature profile of a jet- or rocket-engine exhaust stream by measurements of gas radiation and transmittance, at two or more wavelengths. A single, fixed line of sight is used, using immobile radiators outside of the gas stream, and there is no interference with the flow. At least two sets of measurements are made, each set consisting of the conventional three radiometric measurements of absorption-emission pyrometry, but each set is taken over a different spectral interval that gives different weight to the radiation from a different portion of the optical path. Thereby, discrimination is obtained with respect to location along the path. A given radiometric error causes an error in computed temperatures. The ratio between temperature error and radiometric error depends on profile shape, path length, temperature level, and strength of line absorption, and the absorption coefficient and its temperature dependency. These influence the choice of wavelengths, for any given gas. Conditions for minimum temperature error are derived. Numerical results are presented for a two-wavelength measurement on a family of profiles that may be expected in a practical case of hydrogen-oxygen combustion. Under favorable conditions, the fractional error in temperature approximates the fractional error in radiant-flux measurement.

Buchele, D. R.↗

NASA NTRS1972

Effects of radial and circumferential inlet velocity profile distortions on performance of a short-length double-annular ram induction combustor

Inlet air velocity profile tests were conducted on a full-scale short-length 102-centimeter-diameter annual combustor designed for advanced gas turbine engine applications. The inlet profiles studied include radial distortions that were center peaked, and tip peaked, as well as a circumferential distortion which was center peaked for one-third of the circumference and flat for the other two-thirds. An increase in combustor pressure loss was the most significant effect of the radial air velocity distortions. With the circumferential distortion, exit temperature pattern factor doubled when compared to a flat velocity profile.

Schultz, D. F.↗

NASA NTRS1972

Measurement of temperature profiles in flames by emission-absorption spectroscopy

An investigation was conducted to explore the use of infrared and ultraviolet emission-absorption spectroscopy for determination of temperature profiles in flames. Spectral radiances and absorptances were measured in the 2.7-micron H2O band and the 3064-A OH band in H2/O2 flames for several temperature profiles which were directly measured by a sodium line-reversal technique. The temperature profiles, determined by inversion of the infrared and ultraviolet spectra, showed an average disagreement with line-reversal measurements of 50 K for the infrared and 200 K for the ultraviolet at a temperature of 2600 K. The reasons for these discrepancies are discussed in some detail.

Simmons, F. S.↗

NASA NTRS1972

Wind velocity profiles measured by the smoke-trail method at the Eastern Test Range, 1964

Twenty-six detailed wind profiles measured by the smoke trail technique at the Eastern Test Range during the first seven months of 1964 are presented as plots of west-to-east and south-to-north velocity components at height intervals of 25 meters. The overall altitude ranges of the profiles vary from about 2.6 to 19.1 km. The wind measurements, which were made under a variety of conditions, include velocities in excess of the 90- and 95-percent highest values for the Eastern Test Range. The report also includes a listing of the wind profiles, their maximum velocities and direction of the maximum velocities, measured by the smoke trail method at the Eastern Test Range from 1962 to 1964.

Manning, J. C.↗

NASA NTRS1972

Correlation for temperature profiles in the plane of symmetry downstream of a jet injected normal to a crossflow

A correlation method is presented for approximating the temperature distribution in the plane of symmetry downstream of a jet injected normal to a uniform crossflow. Correlations are developed for the scaling parameters required to define the temperature profile at any desired location from the dimensionless universal form which has been experimentally observed. Profiles calculated using the correlation methods are compared with experimental profiles for several momentum and density ratios at various downstream distances.

Holdeman, J. D.↗

NASA NTRS1972

A regression technique for determining temperature profiles in the upper stratosphere from satellite-measured radiances.

A technique is described whose application makes it possible to almost double the altitude range over which useful temperature profiles may be obtained. For a wide range of atmospheric temperature profiles, the temperature structure between 30 and 55 km may be derived with an expected error of less than 3 C at 30 km to less than 10 C at 55 km, given the temperature structure in the lower 30 km of the profile, and given a consistent and accurate set of radiance observations. For strongly anomalous conditions in the stratosphere, the accuracy of retrievals at tropospheric levels may also be substantially improved.

Gelman, M. E.↗

NASA NTRS1972

The lunar conductivity profile and the nonuniqueness of electromagnetic data inversion.

A review of the theory for the electromagnetic functional used to date to determine the lunar conductivity profile from spectral analyses of lunar magnetometer data. The 'hard' boundary condition used by Sonett et al. (1971) and others appears to be a good approximation for the sunlit lunar hemisphere. The use of the spectral data in conjunction with the functional to find a least squares conductivity profile is examined from the point of view of the nonuniqueness of nonlinear estimation. An unsuccessful search was carried out to find models that were both geophysically reasonable and consistent with the data. It is asserted that the failure to find these models is due to the inadequacy of the functional. Of the models generated, those that best fit the data all have a conductivity peak at a depth of 240 km similar to that of the model discussed by Sonett et al. However, all of these models are quite distinct elsewhere in the profile. It is shown how such models are dependent on both the nature of the functional as well as the initial guess in the least squares procedure. A correlation analysis shows that the only resolvable features from this type of model are a low conductivity crust, a high conductivity peak of limited radial extent, and a low conductivity zone beneath the peak.

Phillips, R. J.↗

NASA NTRS1973

Monthly and annual percentage levels of wind speed differences computed by using FPS-16 radar/Jimsphere wind profile data from Cape Kennedy, Florida

The percentage levels of wind speed differences are presented computed from sequential FPS-16 radar/Jimsphere wind profiles. The results are based on monthly profiles obtained from December 1964 to July 1970 at Cape Kennedy, Florida. The profile sequences contain a series of three to ten Jimspheres released at approximately 1.5-hour intervals. The results given are the persistence analysis of wind speed difference at 1.5-hour intervals to a maximum time interval of 12 hours. The monthly percentage of wind speed differences and the annual percentage of wind speed differences are tabulated. The percentage levels are based on the scalar wind speed changes calculated over an altitude interval of approximately 50 meters and printed out every 25 meters as a function of initial wind speed within each five-kilometer layer from near sea level to 20 km. In addition, analyses were made of the wind speed difference for the 0.2 to 1 km layer as an aid for studies associated with take-off and landing of the space shuttle.

Susko, M.↗

NASA NTRS1972

Development of termination and utilization concepts for flat conductor cables. Volume 1: Development of low profile flat conductor cable connecting device and permanent splice

The development of low-profile flat conductor cable (FCC) connecting device and FCC permanent splice methods are discussed. The design goal for the low-profile connecting device was to mate and unmate FCC harness to a typical spacecraft component with a maximum height of 3/8 in. The results indicate that the design, fabrication, and processing of the low-profile connecting device are feasible and practical. Some redesign will be required to achieve the goal of 3/8 in. Also, failures were experienced subsequent to salt spray and humidity exposure. Five different FCC permanent splice methods were considered. Subsequent to evaluation of these five methods, two design concepts were chosen for development tests.

Source record↗

NASA NTRS1973

A modified wall wake velocity profile for turbulent compressible boundary layers.

The law of the wake and the law of the wall in incompressible turbulent boundary layers formulated by Coles (1956) and their use by Mathews et al. (1970) in the development of a wall-wake representation of the velocity profile in a form applicable for isoenergetic compressible boundary layers are extended to a modified wall-wake velocity profile for turbulent compressible boundary layers. The modified wall-wake profile is shown to provide good representations of experimental velocity distributions.

Sun, C.-C.↗

NASA NTRS1972

Effect of radiometric errors on accuracy of temperature-profile measurement by the spectral-scanning method.

The spectral-scanning method may be used to determine the temperature profile of a jet- or rocket-engine exhaust stream by measurements of gas radiation and transmittance at two or more wavelengths. A single, fixed line of sight is used, using immobile radiators and radiometers outside of the gas stream, and there is no interference with the flow. A given radiometric error causes an error in computed temperatures. The ratio between temperature error and radiometric error depends on profile shape, path length, temperature level, the strength of line absorption, and the absorption coefficient and its temperature coefficient. These influence the choice of wavelengths for any given gas. Conditions for minimum temperature error are derived. Numerical results are presented for a two wavelength measurement on a family of profiles that may be expected in a practical case of H2 - O2 combustion. Under favorable conditions, the fractional error in temperature approximates the fractional error in radiant-flux measurement.

Buchele, D. R.↗

NASA NTRS1973

Spectral structure of tropospheric vertical temperature profiles over Cape Kennedy, Florida.

Recent Jimsphere/Jimsonde measurements of tropospheric temperature profile spectra in the wavelength band from 50 to 2000 meters above the atmospheric boundary layer, taken over Cape Kennedy, Florida, are summarized. The results suggest that the spectra can be represented in the nondimensional form (omega sub g/sigma sub w)phi(k)/sigma sub T squared = S(K), where phi(k) is the temperature profile spectrum at wave number k, omega sub g is the Brunt-Vasala frequency, sigma sub w and sigma sub T denote the standard deviations of the vertical velocity and temperature profiles, and S is a universal function of nondimensional wave number K = k sigma sub w/omega sub g.

Fichtl, G. H.↗

NASA NTRS1973

Airborne profiling of ice thickness using a short pulse radar

The acquisition and interpretation of ice thickness data from a mobile platform has for some time been a goal of the remote sensing community. Such data, once obtainable, is of value in monitoring the changes in ice thickness over large areas, and in mapping the potential hazards to traffic in shipping lanes. Measurements made from a helicopter-borne ice thickness profiler of ice in Lake Superior, Lake St. Clair and the St. Clair river as part of NASA's program to develop an ice information system are described. The profiler described is a high resolution, non-imaging, short pulse radar, operating at a carrier frequency of 2.7 GHz. The system can resolve reflective surfaces separated by as little as 10 cm. and permits measurement of the distance between resolvable surfaces with an accuracy of about 1 cm. Data samples are given for measurements both in a static (helicopter hovering), and a traverse mode. Ground truth measurements taken by an ice auger team traveling with the helicopter are compared with the remotely sensed data and the accuracy of the profiler is discussed based on these measurements.

Vickers, R. S.↗