Search NASA⌕ Search

SEARCH · Search NASA

Results for “scanning electron diffraction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28

Synthesis and Properties of Porous Ti-20 wt.% HA Nanocomposites

In the present study, porous titanium-20 wt.% hydroxyapatite nanocomposites were produced by the combination of mechanical alloying and powder metallurgical process with the addition of titanium hydride particles as the blowing agent. The powder mixture of Ti, HA and spacer particles were milled, pressed and heat-treated to decompose the hydride particles and to sinter into highly porous Ti-HA materials. The resulting microstructures were characterized using x-ray diffraction and scanning electron microscope with energy-dispersive spectrometry. The porosity, compressive strength and corrosion resistance of the porous nanocomposites were investigated. The results show that the compressive strength of porous Ti-HA can be tailored between 210 and 497 MPa by changing the content of blowing agent between 25 and 75%. The increase in the weight ratio of titanium hydride (from 25 to 75%) causes almost a twofold increase in the porosity and decreases the corrosion resistance (by almost two orders of magnitude). The present study has demonstrated that the porous Ti-HA nanocomposites are promising scaffold biomaterials for bone tissue engineering by virtue of their appropriate mechanical and corrosion properties and highly porous structure.

36 MATERIALS SCIENCE↗

Impact of Li Addition in Al-Rich Alloys on Hydrogen Production in Water

In this study, three types of aluminum alloys (Al-Li, Al-Ga-In-Sn and Al-Li-Ga-In-Sn alloys) were prepared via vacuum arc melting technology. The microstructures of the alloys were examined by x-ray diffraction (XRD), scanning electron microscopy (SEM) and energy-dispersive spectroscopy (EDX). The water discharge method was used to evaluate the water–aluminum reaction. The results show that the Al-Li alloy is inert in aqueous ambience, whereas the Al-Ga-In-Sn alloy and Al-Li-Ga-In-Sn alloy rapidly react with water. Meanwhile, the Li addition hinders the aluminum–water reaction mainly due to the formation of AlLi and Li{sub 5}Sn{sub 2} intermetallic compounds, which causes a lower H{sub 2} generation rate and a lower H{sub 2} yield of the Al-Li-Ga-In-Sn alloy than those of the Al-Ga-In-Sn alloy.

36 MATERIALS SCIENCE↗

Synthesis of ZnTe dendrites on multi-walled carbon nanotubes/polyimide nanocomposite membrane by electrochemical atomic layer deposition and photoelectrical property research

We report on the electrochemical atomic layer deposition (EC-ALD) of ZnTe dendrites on the carboxyl-functionalized multi-walled carbon nanotubes/polyimide (COOH-MWCNTs/PI) membrane. Electrochemical characteristics were studied by cyclic voltammetry (CV) and the deposition of ZnTe dendrites was completed using amperometric method (I-t). The prepared ZnTe dendrites were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The growth mechanism of ZnTe dendrites was elucidated to give a deep understanding of crystal growth. The concentration of reagents and deposition cycle had a significant effect on the morphology and structure of deposits. UV-vis transmission study indicated a direct band gap of 2.26 eV. Photoelectrical measurement confirmed the p-type conductivity of ZnTe dendrites, which indicated that the dendritic ZnTe crystals may have potential practical application in optoelectronic devices. - Graphical abstract: Representative SEM images of ZnTe dendrites. (a) Panorama of ZnTe dendrites; (b) a single dendrite. The regular branches appeared like leaves and showed a parallel arrangement layer upon layer between each other. Highlights: Black-Right-Pointing-Pointer ZnTe dendrites were successfully synthesized on CNTs/PI membrane by electrodeposition. Black-Right-Pointing-Pointer The growth mechanism of ZnTe dendritic structures was investigated in detail. Black-Right-Pointing-Pointer The concentration and deposition cycle greatly affected the morphology of ZnTe. Black-Right-Pointing-Pointer OCP and I-t studies showed that ZnTe can be beneficial to photoelectric applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Anion-exchange membranes derived from quaternized polysulfone and exfoliated layered double hydroxide for fuel cells

Layered double hydroxides (LDH) are prepared by controlling urea assisted homogeneous precipitation conditions. Morphology and crystallinity of LDHs are confirmed by X-ray diffraction and scanning electron microscope. After LDHs are incorporated into quaternized polysulfone membranes, transmission electron microscope is used to observe the exfoliated morphology of LDH sheets in the membranes. The properties of the nanocomposite membranes, including water uptake, swelling ratio, mechanical property and ionic conductivity are investigated. The nanocomposite membrane containing 5% LDH sheets shows more balanced performances, exhibiting an ionic conductivity of 2.36×10{sup −2} S cm{sup −1} at 60 °C. - Graphical abstract: Anion-exchange membrane based on quaternized polysulfone and exfoliated layered double hydroxide is optically transparent and has good ionic properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Growth of different phases and morphological features of MnS thin films by chemical bath deposition: Effect of deposition parameters and annealing

Manganese sulfide thin films have been deposited on glass slides by chemical bath deposition (CBD) method. The effects of preparative parameters such as deposition time, bath temperature, concentration of precursors, multi-layer deposition, different source of manganese, different complexing agent and thermal annealing on structural and morphological film properties have been investigated. The prepared thin films have been characterized using the X-ray diffraction (XRD), scanning electron microscopy (SEM) and energy dispersive X-ray analysis (EDX). It exhibit the metastable forms of MnS, the hexagonal γ-MnS wurtzite phase with preferential orientation in the (002) plane or the cubic β-MnS zinc blende with preferential orientation in the (200) plane. Microstructural studies revealed the formation of MnS crystals with different morphologies, such as hexagons, spheres, cubes or flowers like. - Graphical Abstract: We report the preparation of different phases of manganese sulfide thin films (γ, β and α-MnS) by chemical bath deposition method. The effects of deposition parameters such as deposition time and temperature, concentrations of precursors and multi-layer deposition on MnS thin films structure and morphology were investigated. The influence of thermal annealing under nitrogen atmosphere at different temperature on MnS properties was also studied. Different manganese precursors as well as different complexing agent were also used. - Highlights: • γ and β-MnS films were deposited on substrate using the chemical bath deposition. • The effect of deposition parameters on MnS film properties has been investigated. • Multi-layer deposition was also studied to increase film thickness. • The effect of annealing under N{sub 2} at different temperature was investigated.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

High efficiency of isopropanol combustion over cobalt oxides modified ZSM-5 zeolite membrane catalysts on paper-like stainless steel fibers

Catalytic performances of isopropanol combustion and bed pressure drop in structured fixed bed reactor composed of cobalt oxides modified ZSM-5 zeolite membrane catalysts on paper-like stainless steel fibers (Co/ZSM-5/PSSF) and traditional granular ZSM-5 zeolites catalysts were investigated in this paper. Both of the catalyst samples were fabricated by wetness impregnation method and were characterized via X-ray diffraction (XRD), scanning electron microscopy (SEM) coupled with energy dispersive X-ray spectrometer (EDS) mapping and the N{sub 2} adsorption/desorption isotherm analyses. The result of EDS mapping revealed that cobalt oxides dispersed well on ZSM-5/PSSF. The Co/ZSM-5/PSSF catalyst display superior catalytic activity to granular Co/ZSM-5 catalyst, 50% and 90% isopropanol conversion temperatures over Co/ZSM-5/PSSF reduced 107 °C and 51 °C, respectively, compared with those over granular Co/ZSM-5 catalysts. The apparent activation energy for isopropanol combustion over Co/ZSM-5/PSSF (90 kJ/mol) was much lower than that over granular Co/ZSM-5 (134 kJ/mol). When the face velocity increased to 14.9 cm/s, the bed pressure drop of reactor filled with only Co/ZSM-5/PSSF catalysts was 9.5% of that of reactor filled with only granular Co/ZSM-5 catalysts. The ZSM-5 zeolite membrane on paper-like stainless steel fibers support provide good dispersion for cobalt oxides and Co/ZSM-5/PSSF show superior catalytic efficiency of isopropanol combustion and produced lower bed pressure drop in reactor compared with granular ZSM-5 zeolites.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Microstructural characterization and influence of manufacturing parameters on technological properties of vitreous ceramic materials

Microstructure of vitreous ceramic samples manufactured from kaolinitic-clay and feldspars raw materials from Cameroon was investigated in the range 1150-1250 deg. C by X-ray diffraction and scanning electron microscopy and by measuring some technological properties. Moreover, the simultaneous influence of feldspars content, heating temperature and soaking time on water absorption and firing shrinkage was evaluated by adopting the response surface methodology (Doehlert matrix), using the New Efficient Methodology for Research using Optimal Design (NEMROD) software. The results show that a spinel phase, mullite, glassy phase and some amount of hematite were formed. However, the spinel phase and potassic feldspar, as compared to the sodic one, disappeared at moderate firing temperature and soaking time. Apparently, mullite developed from spinel phase, which is formed from the demixion of metakaolin. On the other hand, it is found that the effects of fluxing content and firing temperature on the measured properties were almost similar and more influent than soaking time. Antagonistic and synergetic interactions existed between the considered parameters, and their importance differed for the considered properties. By using this mathematical tool, suitable operating conditions for manufacturing vitreous bodies were determined.

36 MATERIALS SCIENCE↗

Hydrothermal synthesis of iron phosphate microspheres constructed by mesoporous polyhedral nanocrystals

Novel monodispersed Fe{sub 5}(PO{sub 4}){sub 4}(OH){sub 3}·2H{sub 2}O microspheres with the diameters of several micrometers were prepared by a facile one-step hydrothermal method without using any templates, only employing FeCl{sub 3}·6H{sub 2}O and NaNH{sub 4}HPO{sub 4} as the initial materials. The obtained samples were analyzed by X-ray diffraction (XRD), scanning electron microscopy (SEM), and high-resolution transmission electron microscopy (HR-TEM), respectively. The characterizations revealed that the as-prepared microspheres are constructed by the polyhedral nanoparticles with an average diameter of 100 nm. The corresponding FePO{sub 4} microspheres assembled by mesoporous polyhedral nanocrystals can be easily obtained by calcining a sphere-like Fe{sub 5}(PO{sub 4}){sub 4}(OH){sub 3}·2H{sub 2}O precursor. - Graphical abstract: Novel monodispersed Fe{sub 5}(PO{sub 4}){sub 4}(OH){sub 3}·H{sub 2}O microspheres with a diameter of several micrometers were successfully obtained by a simple, template-free hydrothermal route. FePO{sub 4} microspheres constructed by mesoporous polyhedral FePO{sub 4} nanocrystals could be easily prepared by calcining an Fe{sub 5}(PO{sub 4}){sub 4}(OH){sub 3}·2H{sub 2}O precursor. Display Omitted - Highlights: • Monodispersed Fe{sub 5}(PO{sub 4}){sub 4}(OH){sub 3}·2H{sub 2}O microspheres were prepared by a facile hydrothermal method without using any templates • Fe{sub 5}(PO{sub 4}){sub 4}(OH){sub 3}·2H{sub 2}O microspheres present a novel morphology, which was constructed by closely polyhedral nanoparticles. • The FePO{sub 4} microspheres assembled by mesoporous polyhedral nanocrystals obtained by calcining Fe{sub 5}(PO{sub 4}){sub 4}(OH){sub 3}·2H{sub 2}O precursor.

36 MATERIALS SCIENCE↗

Fabrication of Al-Zn solid solution via friction stir processing

Highlights: • Thermomechanical nature of FSP was utilized for mechanical alloying. • Zn particles dissolved in Al during FSP to form solid solution. • Second pass of FSP lead to homogenization and partial decomposition of the solid solution. • Processed alloy exhibited improved hardness over base and FSPed metal. • The process can be adopted for site specific property enhancement. - Abstract: The present study demonstrates that friction stir processing (FSP) can be used as a mechanical alloying tool to process solid solution. Zn was incorporated in commercially pure aluminium by multi-pass FSP leading to its dissolution and formation of supersaturated solid solution which was confirmed by X-ray diffraction and scanning electron microscopy. The hardness across the stir zone matched with the distribution of Zn and was significantly improved compared to the base metal. The supersaturated solid solution that formed in the first pass, partially decomposed during the second pass, leading to the formation of fine Al-Zn precipitates. Thermal stability of the microstructure against abnormal grain growth was also improved after the second pass due to the pinning effect of the grain boundary precipitates. FSP also caused grain refinement of the alloy yielding fine equiaxed grains in the range of 4–6 μm with a high fraction (> 67%) of high angle grain boundaries. Such microstructure is conducive for isotropic properties and the fact that the microstructure is stable against thermal cycles make the process suitable for selective alloying for location specific property enhancement.

36 MATERIALS SCIENCE↗

Intermittent microwave heating synthesized high performance spherical LiFePO{sub 4}/C for Li-ion batteries

An intermittent microwave heating method was used to synthesize spherical LiFePO{sub 4}/C in the presence of glucose as reductive agent and carbon source without the use of the inert gas in the oven processes. The FePO{sub 4} was used as iron precursor to reduce the cost and three lithium salts of Li{sub 2}CO{sub 3}, LiOH and CH{sub 3}COOLi were chosen for comparison of the resulting materials. The materials can be alternatively heated by this method at a temperature controllable mode for crystallization and phase transformation and to provide relaxation time for protecting particles growth. The X-ray diffraction and scanning electron microscope measurements confirmed that the LiFePO{sub 4}/C is olivine structured with the average particle size of 50-100 nm. The spherical LiFePO{sub 4}/C as cathode material showed better electrochemical performance in terms of the specific capacity and the cycling stability, which might be attributed to the highly crystallized phase, small particle distribution and improved conductivity by carbon connection.

36 MATERIALS SCIENCE↗

Morphology investigation of hydrothermally prepared ZnO micro-crystals influenced by Cu{sup 2+} ions

Micrometer-sized ZnO with various shapes have been synthesized by a hydrothermal route with Zn(Ac){sub 2}/NH{sub 3}.H{sub 2}O in the presence of copper ions. Powder X-ray diffraction and scanning electron microscopy were utilized to characterize the composition and structure of the samples, respectively. As-synthesized, the ultrasonic pretreatment, pH value, reaction time and hydrothermal temperature played important roles in crystal structure tailoring. Novel nut-like ZnO crystal with improved crystal quality was obtained with initial Zn{sup 2+}/Cu{sup 2+} ratio of 10, at reaction temperature of 100 {sup o}C, with initial pH of 7.0 and in a reaction time of 4 h, with ultrasonic pretreatment. Time-dependent experiments show that transfer of the Cu ions plays a crucial role as it causes the difference in crystal growth velocity.

36 MATERIALS SCIENCE↗

Studies on the structural and optical properties of zinc oxide nanobushes and Co-doped ZnO self-aggregated nanorods synthesized by simple thermal decomposition route

Pure and Co-doped zinc oxide nanomaterials were prepared by a simple low temperature synthesis and were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), high resolution-transmission electron microscopy (HR-TEM), diffused reflectance spectroscopy (DRS) and electron paramagnetic resonance (EPR) techniques. The results showed the formation of nanobushes that consists of several nanowires for pure ZnO and the nanorods formed by self-aggregation for Co-doped ZnO. The presence of Co{sup 2+} ions replacing some of the Zn{sup 2+} in the ZnO lattice was confirmed by EPR and DRS studies. The mechanism for the formation of self-aggregated and self-aligned ZnO rods after the incorporation of cobalt in the lattice by the building block units is discussed in this study. Morphological studies were carried out using SEM and HR-TEM, which supports the validity of the proposed mechanism for the formation of ZnO nanobushes and Co-doped ZnO nanorods. The synthesized nanomaterials were found to have good optoelectronic properties.

36 MATERIALS SCIENCE↗

Meso/macroporous {gamma}-Al{sub 2}O{sub 3} fabricated by thermal decomposition of nanorods ammonium aluminium carbonate hydroxide

Highlights: Black-Right-Pointing-Pointer Rod-like AACH were synthesized by a hydrothermal treatment. Black-Right-Pointing-Pointer AACH was formed via a Al(OH){sub 3} {yields} (NH{sub 4}){sub 2}Al{sub 6}(CO{sub 3}){sub 3}(OH){sub 14}{center_dot}xH{sub 2}O {yields} NH{sub 4}Al(OH){sub 2}CO{sub 3}{center_dot}H{sub 2}O {yields} NH{sub 4}Al(OH){sub 2}CO{sub 3} path. Black-Right-Pointing-Pointer Alumina derived from AACH has a good thermal stability. Black-Right-Pointing-Pointer The obtained alumina possesses large pore volume and bimodal porosity. -- Abstract: Through exploring the reaction parameters during the synthesis of the AACH, rod-like ammonium aluminium carbonate hydroxide (AACH) with high crystallinity has been successfully prepared via a facile hydrothermal method. The synthesis parameters like time, the molar ratio of NH{sub 4}HCO{sub 3}/Al and the properties of starting materials were systematically investigated. The structure was characterized using X-ray powder diffraction (XRD), scanning electron microscopy (SEM), IR and transmission electron microscopy (TEM). The experimental results display that the obtained {gamma}-Al{sub 2}O{sub 3} materials possess meso/macroporosity and large pore volume, which are mainly attributed to the removal of gas molecules during the decomposition of AACH. Moreover, using the rod-like AACH as precursor, {gamma}-Al{sub 2}O{sub 3} nanorods were obtained via a low-temperature thermal decomposition method.

36 MATERIALS SCIENCE↗

Hydrothermal synthesis of nanostructured zinc oxide and study of their optical properties

Highlights: Black-Right-Pointing-Pointer Nanostructured ZnO were successfully obtained by a hydrothermal route. Black-Right-Pointing-Pointer Inorganic precursor and molar ratio are key factors for morphology and particle size. Black-Right-Pointing-Pointer Optical properties were also studied. -- Abstract: Nanostructured ZnO (nanorods, nanoshuttles) have been synthesized by hydrothermal approach using ZnCl{sub 2} or Zn(NO{sub 3}){sub 2}{center_dot}6H{sub 2}O as zinc sources and cetyltrimethylammonium bromide as structure-directing agent. Techniques X-ray powder diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), UV-visible absorption, Fourier transform infrared spectroscopy (FTIR) and Raman spectroscopy have been used to characterize the structure, morphology and composition of the nanostructured zinc oxide. The optical properties of the as-obtained materials were also studied and showing that it is possible to apply the ZnO nanoshuttles and nanorods on the UV filter, photocatalysis, and special optical devices.

36 MATERIALS SCIENCE↗

Solvothermal synthesis of monodispersed CoZr{sub 4}(PO{sub 4}){sub 6} microspheres and their application as microwave absorber

Graphical abstract: Monodispersed CoZr{sub 4}(PO{sub 4}){sub 6} porous microspheres with shell structure were synthesized via a combined solvothermal method and calcination route. The radar-wave absorbability of the purple sample calcined at 900 Degree-Sign C was strongest at the frequency of about 8.5 GHz. Highlights: Black-Right-Pointing-Pointer In this study we synthesized monodispersed CoZr{sub 4}(PO{sub 4}){sub 6} porous microspheres as microwave absorber. Black-Right-Pointing-Pointer The relationship between microstructures and the electromagnetic properties was indicated. Black-Right-Pointing-Pointer The radar-wave absorbability of the sample was included. -- Abstract: Monodispersed CoZr{sub 4}(PO{sub 4}){sub 6} microspheres with a diameter of 40 {mu}m were achieved via a combining solvothermal and calcination route. The crystallinity of the calcined microspheres with shell structure was improved, while the monodisperse property and morphologies remained. The possible formation mechanism of the porous CoZr{sub 4}(PO{sub 4}){sub 6} microspheres with nanoshell was proposed. The samples were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier transform infrared spectra (FT-IR) technologies, thermal analysis (TG and DSC), nitrogen adsorption-desorption isotherms and network analyzer. The sample calcined at 900 Degree-Sign C shows a strongest absorbability in the radar-wave absorbability test.

36 MATERIALS SCIENCE↗

Synthesis of high surface area ZnO powder by continuous precipitation

Graphical abstract: High surface area ZnO powders are synthesized by a low temperature continuous precipitation under ultrasonication. Urea is used as precipitating agent so that no contamination of ZnO powder emanating from precipitating agent, such as, alkalis, is observed. pH and type of precursor greatly affects the surface area and other properties. In this manuscript, we report a very simple and effective continuous precipitation to synthesize high surface area ZnO powder. Highlights: Black-Right-Pointing-Pointer The synthesis of high surface area ZnO powder was achieved at 90 Degree-Sign C in a continuous precipitation unit. Black-Right-Pointing-Pointer Continuous precipitation unit was ultrasonicated to improve final product homogeneity. Black-Right-Pointing-Pointer Precipitation intermediate, hydrozincite, was led to high surface area ZnO powder. Black-Right-Pointing-Pointer The synthesized ZnO nanoparticles had a rather uniform mesoporous structure. -- Abstract: Synthesis of high surface area ZnO powder was achieved by continuous precipitation using zinc ions and urea at low temperature of 90 Degree-Sign C. The powder precipitated resulted in high-purity single-phase ZnO powder when calcined at 280 Degree-Sign C for 3 h in air. The solution pH and the precipitation duration strongly affected the surface area of the calcined ZnO powder. Detailed structural characterizations demonstrated that the synthesized ZnO powder were single crystalline with wurtzite hexagonal phase. The powdered samples precipitated by homogeneous precipitation crystallized directly to hydrozincite without any intermediate phase formation. The phase structures, morphologies and properties of the final ZnO powders were investigated by X-ray diffraction (XRD), scanning electron microscopy (SEM), dynamic light scattering particle size analysis (DLS), and nitrogen physisorption in order to determine the specific surface area (BET) and the pore size distribution (BJH).

36 MATERIALS SCIENCE↗

Formation and conversion mechanisms between single-crystal gamma-MnOOH and manganese oxides

Highlights: ► Single-crystal γ-MnOOH was obtained via hydrothermal method. ► α-MnO{sub 2} was transformed to γ-MnOOH by a dissolution-growth-recrystallization process. ► α-MnO{sub 2} preferred growth on (111{sup ¯}) crystal plane of γ-MnOOH. ► γ-MnOOH was a useful precursor to prepare manganese oxide via calcination. -- Abstract: Formation and conversion mechanisms between single-crystal gamma-MnOOH and manganese oxides had investigated systematically. Without extra surfactant or template, α-MnO{sub 2} nanorods and prismatic single crystalline γ-MnOOH rods had been synthesized under hydrothermal treatment in this study. The formation and conversion mechanisms of prismatic γ-MnOOH rod were investigated by powder X-ray diffraction (XRD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). It was found that the formation process includes three evolution stages: (1) formation of α-MnO{sub 2} nanorods whiskers; (2) transformation from α-MnO{sub 2} nanorods to prismatic γ-MnOOH rods by a dissolution-growth-recrystallization process; and (3) preferred growth on (111{sup ¯}) crystal plane. In addition, β-MnO{sub 2}, Mn{sub 2}O{sub 3} or Mn{sub 3}O{sub 4} rods could be obtained by calcination of the γ-MnOOH rods at different temperatures, which indicated that γ-MnOOH is an important precursor for preparing manganese oxides. The morphology and dimension of γ-MnOOH rods remained unchanged after converted to β-MnO{sub 2}, Mn{sub 2}O{sub 3} and Mn{sub 3}O{sub 4}.

36 MATERIALS SCIENCE↗

La{sub 0.5}Sr{sub 0.5}TiO{sub 3} nanopowders prepared by the hydrothermal method

Graphical abstract: LRTEM image of the single-phase La{sub 0.5}Sr{sub 0.5}TiO{sub 3} particles. It is seen from the figure that the product has a plate-like morphology with average particles sizes in the range of 100–300 nm. In addition, the SAED data taken from an individual particle (lower inset) shows the presence of sharp diffraction rings, which are indicative of polycrystalline La{sub 0.5}Sr{sub 0.5}TiO{sub 3} formation. The high-resolution TEM image (upper inset) shows for further confirmation of a crystalline structure of La{sub 0.5}Sr{sub 0.5}TiO{sub 3} powder. This image shows a clearly resolved crystalline domain with uniform interplanar spacing of 0.276 nm. Highlights: ► La{sub 0.5}Sr{sub 0.5}TiO{sub 3} nanopowder is prepared in 2 M KOH solution by hydrothermal method. ► The solution is heat treated at 220 °C for 24 h in air. ► LRTEM reveals a plate-like morphology of particle with average size of 100–300 nm. ► HRTEM image shows a crystalline domain with interplanar spacing of 0.276 nm. -- Abstract: La{sub 0.5}Sr{sub 0.5}TiO{sub 3} nanopowders were prepared by the hydrothermal method. The influence of processing parameters, including KOH concentration, reaction temperature and reaction time on the obtained products were studied. The structure and morphology of the obtained products were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The XRD results show that pure phase La{sub 0.5}Sr{sub 0.5}TiO{sub 3} nanopowders can be successfully synthesized with 2 M KOH concentration at a low temperature of 220 °C for 24 h. In addition, the product has a plate-like shape with particle sizes in the range of 25–100 nm as estimated by TEM.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗