Search NASA⌕ Search

SEARCH · Search NASA

Results for “science objectives”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28

High resolution infrared spectroscopy of the sun and the earth's atmosphere from space

The FFT spectrometer used in the atmospheric trace molecule spectroscopy (ATMOS) experiment, flown for the first time aboard the Shuttle Spacelab 3 mission (in April 1985), is described together with the instrument's design parameters, the ATMOS's science objectives, and observational techniques used. The ATMOS experiment acquired more than 1000 atmospheric spectra with an equal number of 'solar only' scans, yielding absorption spectra of some 400 different atmospheric constituents. Data were obtained on such key reservoir species as COF2, HNO4, and N2O5; simultaneous vertical distributions of the minor gases from 5 to 140 km; the entire odd-nitrogen family in the stratosphere; and on most of the halogen-source gases with their corresponding reservoir and sink species.

Farmer, Crofton B.↗

Planetary protection issues for sample return missions

Planetary protection (PP) issues for both a comet nucleus sample return (CNSR) mission and a Mars rover sample return (MRSR) mission are discussed, with special attention given to the PP requirements for such missions, the exobiology science objectives for the CNSR and MRSR missions, and a qualitative PP risk assessment for both mission types. A set of contamination control procedures for both missions is presented, which identify procedures for each of the mission phases (i.e., the prelaunch, launch, sample handling, transit vehicle, and earth return). Recommendations for further research and technology development are discussed.

Devincenzi, D. L.↗

Report of the Asilomar 3 LDR Workshop

The conclusions and recommendations of the workshop held to study technology development issues critical to the Large Deployable Reflector (LDR) are summarized. LDR is to be a dedicated, orbiting, astronomical observatory, operating at wavelengths from 30 to 1000 microns, a spectral region where the Earth's atmosphere is almost completely opaque. Because it will have a large, segmented, passively cooled aperture, LDR addresses a wide range of technology areas. These include lightweight, low cost, structural composite reflector panels, primary support structures, wavefront sensing and adaptive optics, thermal background management, and integrated vibration and pointing control systems. The science objectives for LDR present instrument development challenges for coherent and direct arrayed detectors which can operate effectively at far infrared and submillimeter wavelengths, and for sub-Kelvin cryogenic systems.

Mahoney, M. J.↗

Science plan for the Alaska SAR facility program. Phase 1: Data from the first European sensing satellite, ERS-1

Science objectives, opportunities and requirements are discussed for the utilization of data from the Synthetic Aperture Radar (SAR) on the European First Remote Sensing Satellite, to be flown by the European Space Agency in the early 1990s. The principal applications of the imaging data are in studies of geophysical processes taking place within the direct-reception area of the Alaska SAR Facility in Fairbanks, Alaska, essentially the area within 2000 km of the receiver. The primary research that will be supported by these data include studies of the oceanography and sea ice phenomena of Alaskan and adjacent polar waters and the geology, glaciology, hydrology, and ecology of the region. These studies focus on the area within the reception mask of ASF, and numerous connections are made to global processes and thus to the observation and understanding of global change. Processes within the station reception area both affect and are affected by global phenomena, in some cases quite critically. Requirements for data processing and archiving systems, prelaunch research, and image processing for geophysical product generation are discussed.

Carsey, Frank D.↗

Optical interferometer in space

The present design concepts for a Laser Gravitational Wave Observatory in Space are described. Laser heterodyne distance measurements are made between test masses located in three spacecraft separated by roughly 10(exp 6) km. The major technology issues are: the reduction of spurious acceleration noise for the test masses to below 2 x 10(exp -15) cm/sq sec/Hz(0.5) from 10(exp -5) to 10(exp -3) Hz; and the measurement of changes in the difference of the antenna arm lengths to 5 x 10(exp -11) cm/Hz(0.5) from 10(exp -3) to 1 Hz with high reliability. The science objectives are: to measure discrete sinusoidal gravitational wave signals from individual sources with periods of 1 second to 1 day; to measure the stochastic background due to unresolved binaries; and to search for gravitational wave pulses with periods longer than 1 sec from possible exotic sources such as gravitational collapse of very massive objects.

Bender, Peter L.↗

Microspacecraft missions and systems

The microspacecraft is defined as a fully functional spacecraft whose mass is on the order of 10 kg or less. The results of a recent microspacecraft workshop are reviewed. The workshop concluded that microspacecraft are feasible and can be enabling for missions that require multiple simultaneous measurements displaced in position or very high mission delta-VSDIO-s. The paper includes discussions of science objectives and instruments as well as potential missions. Potential missions include a very close approach to the sun, determining the origin of gamma ray bursters and a search for gravity waves. Technology for microspacecraft is coming from the 'Lightsat' or small satellite community and developments sponsored by the SDIO. Concepts for microspacecraft power and telecommunications subsystems developed at the JPL are presented. Due to their small size, microspacecraft can be launched by traditional chemical rockets and also unconventional launchers such as electromagnetic launchers.

Jones, Ross M.↗

Goodard Space Flight Center/Wallops Flight Facility airborne geoscience support capability

Goddard Space Flight Center's Wallops Facility (GSFC/WFF), operates six aircraft which are used as airborne geoscience platforms. The aircraft complement consists of two UH-1B helicopters, one twin engine Skyvan, one twin jet T-39, and two four engine turboprop aircraft (P-3 and Electra) offering the research community a wide range of payload, altitude, speed, and range capabilities. WFF's support to a principal investigator include mission planning of all supporting elements, installation of equipment on the aircraft, fabrication of brackets, and adapters as required to adapt payloads to the aircraft, and planning of mission profiles to meet science objectives. The flight regime includes local, regional, and global missions. The WFF aircraft serve scientists at GSFC, other NASA centers, other government agencies, and universities. The WFF mode of operation features the walk on method of conducting research projects. The principal investigator requests aircraft support by letter to WFF and after approval is granted, works with the assigned mission manager to plan all phases of project support. The instrumentation is installed in WFF electronics racks, mounted on the aircraft, the missions are flown, and the equipment is removed when the scientific objectives are met. The principal investigator reimburses WFF for each flight hours, any overtime and travel expenses generated by the project, and for other mission-related expenses such as aircraft support services required at deployment bases.

Navarro, Roger L.↗

Airborne sulfur trace species intercomparison campaign: Sulfur dioxide, dimethylsulfide, hydrogen sulfide, carbon disulfide, and carbonyl sulfide

Results from an airborne intercomparison of techniques to measure tropospheric levels of sulfur trace gases are presented. The intercomparison was part of the NASA Global Tropospheric Experiment (GTE) and was conducted during the summer of 1989. The intercomparisons were conducted on the Wallops Electra aircraft during flights from Wallops Island, Virginia, and Natal, Brazil. Sulfur measurements intercompared included sulfur dioxide (SO2), dimethylsulfide (DMS), hydrogen sulfide (H2S), carbon disulfide (CS2), and carbonyl sulfide (OCS). Measurement techniques ranged from filter collection systems with post-flight analyses to mass spectrometer and gas chromatograph systems employing various methods for measuring and identifying the sulfur gases during flight. Sampling schedules for the techniques ranged from integrated collections over periods as long as 50 minutes to one- to three-minute samples every ten or fifteen minutes. Several of the techniques provided measurements of more than one sulfur gas. Instruments employing different detection principles were involved in each of the sulfur intercomparisons. Also included in the intercomparison measurement scenario were a host of supporting measurements (i.e., ozone, nitrogen oxides, carbon monoxide, total sulfur, aerosols, etc.) for purposes of: (1) interpreting results (i.e., correlation of any noted instrument disagreement with the chemical composition of the measurement environment); and (2) providing supporting chemical data to meet CITE-3 science objectives of studying ozone/sulfur photochemistry, diurnal cycles, etc. The results of the intercomparison study are briefly discussed.

Gregory, Gerald L.↗

A cloud, precipitation and electrification modeling effort for COHMEX

In mid-1987, the Modeling Group of the Institute of Atmospheric Sciences (IAS) began to simulate and analyze cloud runs that were made during the Cooperative Huntsville Meteorological Experiment (COHMEX) Project and later. The cloud model was run nearly every day during the summer 1986 COHMEX Project. The Modeling Group was then funded to analyze the results, make further modeling tests, and help explain the precipitation processes in the Southeastern United States. The main science objectives of COHMEX were: (1) to observe the prestorm environment and understand the physical mechanisms leading to the formation of small convective systems and processes controlling the production of precipitation; (2) to describe the structure of small convective systems producing precipitation including the large and small scale events in the environment surrounding the developing and mature convective system; (3) to understand the interrelationships between electrical activity within the convective system and the process of precipitation; and (4) to develop and test numerical models describing the boundary layer, tropospheric, and cloud scale thermodynamics and dynamics associated with small convective systems. The latter three of these objectives were addressed by the modeling activities of the IAS. A series of cloud modes were used to simulate the clouds that formed during the operational project. The primary models used to date on the project were a two dimensional bulk water model, a two dimensional electrical model, and to a lesser extent, a two dimensional detailed microphysical cloud model. All of the models are based on fully interacting microphysics, dynamics, thermodynamics, and electrical equations. Only the 20 July 1986 case was analyzed in detail, although all of the cases run during the summer were analyzed as to how well they did in predicting the characteristics of the convection for that day.

Orville, Harold D.↗

The case for human exploration of Mars

The results of a workshop on the feasibility and logic of a manned Mars mission and base are discussed. Criteria for evaluating the merit of proposed Mars expeditions are presented, and the precursor mission requirements of various proposed scenarios are considered. Science objectives and how various mission scenarios would serve them are addressed. Issues of launch, assembly, transportation, and Mars base infrastructure are examined. Advanced propulsion concepts for use in a Mars mission are discussed, and international cooperation in a Mars mission is addressed. The relevance of the workshop to the crisis of education in America is considered.

Stoker, Carol R.↗

Mission to Planet Earth technology assessment and development for large deployable antennas

A NASA R&D program, the Large Deployable Antenna program, was initiated to investigate and demonstrate the availability of critical technologies for passive microwave imagers. The science objectives, current state-of-the-art, a number of electromagnetic configurations under consideration, and the mechanical systems development effort are presented. The program team conducted a detailed technology review, evaluated the feasibility and technology readiness for a large dual-reflector radiometer, and developed a system concept for a 25-meter deployable radiometer. The study approach involved determining basic operational parameters and configurations for a geosynchronous wide-scanning radiometer from which specific structural requirements were utilized as goals (rather than specifications) with which specific technologies could be evaluated.

Rogers, C. A.↗

Life sciences research using a lunar laboratory

The necessity for life sciences research on the lunar surface in order to determine the consequences of returning from extended missions in various low gravity environments and of transiting through high multiple gravity forces during decelerations is discussed. The functions of a lunar gravitational biology laboratory are outlined. Lunar science objectives include investigations in developmental biology including the evaluation of the capacity of diverse organisms to undergo normal development and the evaluation of the use of the lunar environment to study specific developmental phenomena in ways that cannot be accomplished by earth-based research. The need for musculoskeletal studies to examine the dynamics of osteoclast and osteoblast formation and breakdown and to address bone and demineralization problems is discussed. Biological adaptation to hypogravic environments and the effects of radiation and electromagnetic environmental factors are also considered.

Cipriano, Leonard F.↗

SAGE III capabilities and global change

The science objectives of the satellite-borne SAGE III are presented as they pertain to detecting global change. SAGE III is the proposed follow on and improved version of SAM II, SAGE I and SAGE II which have measured stratospheric and, in some cases, tropospheric species since late 1978. Specifically, SAGE III will measure profiles of aerosols, ozone, water vapor, nitrogen dioxide and trioxide, neutral density, temperature, clouds, and chlorine dioxide using the solar and lunar occultation techniques. These techniques are inherently self-calibrating, provide high vertical resolution, and use well-behaved data retrievals making them ideal for trend detection and global change studies. The potential capabilities of SAGE III are illustrated by using data and results from SAM II, SAGE I and SAGE II.

Mccormick, M. Patrick↗

The Solar Oscillations Investigation-Michelson Doppler Imager for SOHO

The Solar Oscillations Investigation-Michelson Doppler Imager (SOI-MDI) for the SOHO (Solar and Heliospheric Observatory) mission is intended to investigate the solar interior using helioseismology techniques. The SOI program consists of a coordinated set of observations intended to address a set of science objectives, an MDI instrument, and a facility that will provide data reduction and analysis capability. The MDI instrument will take filtergrams to measure LOS velocity, line and continuum intensity, and LOS magnetic fields with both 4 and 1.2 arcsec resolution, The SOI study is designed to take advantage of the anticipated SOHO telemetry by organizining the observations into four programs: structure (at all times), dynamics (two months per year), campaign (eight hours per day, 10 months per year), and magnetic field (a few minutes per day).

Scherrer, P. H.↗

Fault tolerant, radiation hard, high performance digital signal processor

An architecture has been developed for a high-performance VLSI digital signal processor that is highly reliable, fault-tolerant, and radiation-hard. The signal processor, part of a spacecraft receiver designed to support uplink radio science experiments at the outer planets, organizes the connections between redundant arithmetic resources, register files, and memory through a shuffle exchange communication network. The configuration of the network and the state of the processor resources are all under microprogram control, which both maps the resources according to algorithmic needs and reconfigures the processing should a failure occur. In addition, the microprogram is reloadable through the uplink to accommodate changes in the science objectives throughout the course of the mission. The processor will be implemented with silicon compiler tools, and its design will be verified through silicon compilation simulation at all levels from the resources to full functionality. By blending reconfiguration with redundancy the processor implementation is fault-tolerant and reliable, and possesses the long expected lifetime needed for a spacecraft mission to the outer planets.

Holmann, Edgar↗

Lunar optical interferometer

Various design configurations of a lunar optical interferometer are examined to determine the interaction of science objectives and the architecture of an instrument that will have 10 microarcsec imaging resolution and 0.1 microarcsec astrometric accuracy. The imaging of the central energy source of AGNs, the discovery of earth-like planets around nearby stars, and the measurement of the proper motion of extragalactic objects to determine the isotropy of the Hubble expansion are some of the observations possible with a lunar interferometer. This interferometer with kilometric baselines and large collecting area will be able to make astronomical observations with angular resolution and sensitivity many orders of magnitude beyond orbital based or earth based instruments.

Shao, M.↗

A synthesis array for lunar submillimeter astronomy

This paper describes a system concept for a synthesis array for lunar submillimeter astronomy (SALSA). It includes a brief discussion of the science objectives and the advantages of a placing such an array on the moon, the system concept, and a top-level discussion of the various subsystems, including the technology drivers associated with each.

Mahoney, M. J.↗

Report of the ultraviolet and visible sensors panel

In order to meet the science objectives of the Astrotech 21 mission set the Ultraviolet (UV) and Visible Sensors Panel made a number of recommendations. In the UV wavelength range of 0.01 to 0.3 micro-m the focus is on the need for large format high quantum efficiency, radiation hard 'solar-blind' detectors. Options recommended for support include Si and non-Si charge coupled devices (CCDs) as well as photocathodes with improved microchannel plate readouts. For the 0.3 to 0.9 micro-m range, it was felt that Si CCDs offer the best option for high quantum efficiencies at these wavelengths. In the 0.9 to 2.5 micro-m the panel recommended support for the investigation of monolithic arrays. Finally, the panel noted that the implementation of very large arrays will require new data transmission, data recording, and data handling technologies.

Timothy, J. Gethyn↗