Search NASA⌕ Search

SEARCH · Search NASA

Results for “source location”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28

Multiplexing Technology for Acoustic Emission Monitoring of Aerospace Vehicles

The initiation and propagation of damage mechanisms such as cracks and delaminations generate acoustic waves, which propagate through a structure. These waves can be detected and analyzed to provide the location and severity of damage as part of a structural health monitoring (SHM) system. This methodology of damage detection is commonly known as acoustic emission (AE) monitoring, and is widely used on a variety of applications on civil structures. AE has been widely considered for SHM of aerospace vehicles. Numerous successful ground and flight test demonstrations have been performed, which show the viability of the technology for damage monitoring in aerospace structures. However, one significant current limitation for application of AE techniques on aerospace vehicles is the large size, mass, and power requirements for the necessary monitoring instrumentation. To address this issue, a prototype multiplexing approach has been developed and demonstrated in this study, which reduces the amount of AE monitoring instrumentation required. Typical time division multiplexing techniques that are commonly used to monitor strain, pressure and temperature sensors are not applicable to AE monitoring because of the asynchronous and widely varying rates of AE signal occurrence. Thus, an event based multiplexing technique was developed. In the initial prototype circuit, inputs from eight sensors in a linear array were multiplexed into two data acquisition channels. The multiplexer rapidly switches, in less than one microsecond, allowing the signals from two sensors to be acquired by a digitizer. The two acquired signals are from the sensors on either side of the trigger sensor. This enables the capture of the first arrival of the waves, which cannot be accomplished with the signal from the trigger sensor. The propagation delay to the slightly more distant neighboring sensors makes this possible. The arrival time from this first arrival provides a more accurate source location determination. The multiplexer also identifies which channels are acquired by encoding TTL logic pulses onto the latter portion of the signals. This prototype system was demonstrated using pencil lead break (Hsu-Neilsen) sources on an aluminum plate. It performed as designed providing rapid low noise trigger based switching with encoded channel identification. this multiplexing approach is not limited to linear arrays, but can be easily extended to monitor sensors in planar ot three dimensional arrays. A 32 channel multiplexing system is under development that will allow arbitrary sensor placement. Another benefit of this multiplexing system is the reduction in the expense of data acquisition hardware. In addition, the reduced weight and power requirements are of extreme importance for proposed AE systems on aerospace vehicles.

Prosser, William↗

CONSTRAINING MASS RATIO AND EXTINCTION IN THE FU ORIONIS BINARY SYSTEM WITH INFRARED INTEGRAL FIELD SPECTROSCOPY

We report low-resolution near-infrared spectroscopic observations of the eruptive star FU Orionis using the Integral Field Spectrograph (IFS) Project 1640 installed at the Palomar Hale telescope. This work focuses on elucidating the nature of the faint source, located 0.''5 south of FU Ori, and identified in 2003 as FU Ori S. We first use our observations in conjunction with published data to demonstrate that the two stars are indeed physically associated and form a true binary pair. We then proceed to extract J- and H-band spectro-photometry using the damped LOCI algorithm, a reduction method tailored for high contrast science with IFS. This is the first communication reporting the high accuracy of this technique, pioneered by the Project 1640 team, on a faint astronomical source. We use our low-resolution near-infrared spectrum in conjunction with 10.2 {mu}m interferometric data to constrain the infrared excess of FU Ori S. We then focus on estimating the bulk physical properties of FU Ori S. Our models lead to estimates of an object heavily reddened, A{sub V} = 8-12, with an effective temperature of {approx}4000-6500 K. Finally, we put these results in the context of the FU Ori N-S system and argue that our analysis provides evidence that FU Ori S might be the more massive component of this binary system.

79 ASTRONOMY AND ASTROPHYSICS↗

The Ever Changing X-ray Sky: X-ray Transients Observed With BATSE

X-ray transients are typically sources in our own galaxy. They are called "transient" because they usually spend more time in quiescence than in outburst. These transients consist of a compact object and a "normal" star in a binary system. The compact objects in some of these systems are known to be neutron stars because they exhibit X-ray bursts or periodic pulsations, Other systems are believed to contain black holes based upon their outburst behavior and in some cases, optical measurements of their masses. The Burst and Transient Source Experiment (BATSE), one of 4 instruments on the Compton Gamma Ray Observatory, was an all-sky instrument sensitive to photons from about 20 keV to 2 MeV, designed primarily to detect gamma-ray bursts. Transient and persistent hard X-ray point sources were extracted from the data using the Earth occultation method to measure source intensities. In this method, the change in count rate in a BATSE detector was measured just before and just after a source location was occulted by the Earth. For long period pulsars (>1 second) Fourier transforms and epoch-folded searches were used to measure pulse frequency and pulsed flux. Using these methods, 3 black hole candidates and 6 X-ray pulsars were discovered with BATSE during its 9 years in orbit. BATSE provided unprecedented temporal coverage in the 20 keV - 2 MeV band, allowing detection of numerous new outbursts of X-ray transients. In this talk, I will describe the BATSE instrument, discuss methods we use to detect hard X-ray sources, and describe observations of X-ray transients.

Wilson-Hodge, Colleen A.↗

DISCOVERY OF TeV GAMMA-RAY EMISSION FROM TYCHO'S SUPERNOVA REMNANT

We report the discovery of TeV gamma-ray emission from the Type Ia supernova remnant (SNR) G120.1+1.4, known as Tycho's SNR. Observations performed in the period 2008-2010 with the VERITAS ground-based gamma-ray observatory reveal weak emission coming from the direction of the remnant, compatible with a point source located at 00{sup h}25{sup m}27.{sup s}0, + 64{sup 0}10'50'' (J2000). The TeV photon spectrum measured by VERITAS can be described with a power law dN/dE = C(E/3.42 TeV){sup -}{Gamma} with {Gamma} = 1.95 {+-} 0.51{sub stat} {+-} 0.30{sub sys} and C = (1.55 {+-} 0.43{sub stat} {+-} 0.47{sub sys}) x 10{sup -14} cm{sup -2} s{sup -1} TeV{sup -1}. The integral flux above 1 TeV corresponds to {approx}0.9% of the steady Crab Nebula emission above the same energy, making it one of the weakest sources yet detected in TeV gamma rays. We present both leptonic and hadronic models that can describe the data. The lowest magnetic field allowed in these models is {approx}80 {mu}G, which may be interpreted as evidence for magnetic field amplification.

79 ASTRONOMY AND ASTROPHYSICS↗

Stationary and drone-assisted methane plume localization with dispersion spectroscopy

This work presents stationary and mobile retroreflector-based remote sensing techniques for methane leak localization and quantification using chirped laser dispersion spectroscopy equipped with a custom laser transceiver capable of continuous tracking of a flying drone and coupled with inverse atmospheric gas dispersion modeling. The techniques demonstrate the ability to localize leaks as low as 0.13 g CH 4 ·s -1 , which are up to 25 times smaller than those typically observed at natural gas facilities, as well as actively track a moving retroreflector mounted on a lightweight (~250 g) drone to enable spatial plume reconstruction. This system exhibited a 2.3 ppm-m sensitivity over pathlengths of 40–150 m. Source localization to within ±7 m is demonstrated using a modified horizontal radial plume mapping technique with a stationary retroreflector grid. Meanwhile, the mobile system utilizing a drone-mounted retroreflector is able to localize a controlled release within ±1 m of its source location and estimate leak rates using inversion techniques assuming type B Gaussian plume stability class within ±30% error with respect to the actual low flow rate releases.

47 OTHER INSTRUMENTATION↗

Integrated hydrogeophysical modelling and data assimilation for geoelectrical leak detection

Time-lapse electrical resistivity tomography (ERT) measurements provide indirect observations of hydrological processes in the Earth's shallow subsurface at high spatial and temporal resolution. ERT has been used in the past decades to detect leaks and monitor the evolution of associated contaminant plumes. Specifically, inverted resistivity images allow visualization of the dynamic changes in the structure of the plume. However, existing methods do not allow the direct estimation of leak parameters (e.g. leak rate, location, etc.) and their uncertainties. We propose an ensemble-based data assimilation framework that evaluates proposed hydrological models against observed time-lapse ERT measurements without directly inverting for the resistivities. Each proposed hydrological model is run through the parallel coupled hydro-geophysical simulation code PFLOTRAN-E4D to obtain simulated ERT measurements. The ensemble of model proposals is then updated using an iterative ensemble smoother. In this paper, we demonstrate the proposed framework on synthetic and field ERT data from controlled tracer injection experiments. Our results show that the approach allows joint identification of contaminant source location, initial release time, and solute loading from the cross-borehole time-lapse ERT data, alongside with an assessment of uncertainties in these estimates. We demonstrate a reduction in site-wide uncertainty by comparing the prior and posterior plume mass discharges at a selected image plane. This framework is particularly attractive to sites that have previously undergone extensive geological investigation (e.g., nuclear sites). It is well suited to complement ERT imaging and we discuss practical issues in its application to field problems.

58 GEOSCIENCES↗

SMA Line Observations of the CH{sub 3}OH-maser Outflow in DR21(OH)

We present a (sub)millimeter line survey of the methanol maser outflow located in the massive star-forming region DR21(OH) carried out with the Submillimeter Array (SMA) at 217/227 GHz and 337/347 GHz. We find transitions from several molecules toward the maser outflow such as CH{sub 3}OH, H{sub 2}CS, C{sup 17}O, H{sup 13}CO{sup +}, and C{sup 34}S. However, with the present observations, we cannot discard the possibility that some of the observed species such as C{sup 17}O, C{sup 34}S, and H{sub 2}CS, might be instead associated with the compact and dusty continuum sources located in the MM2 region. Given that most of transitions correspond to methanol lines, we have computed a rotational diagram with CASSIS and an LTE synthetic spectra with XCLASS for the detected methanol lines in order to estimate the rotational temperature and column density in the small solid angle of the outflow where enough lines are present. We obtain a rotational temperature of 28 ± 2.5 K and a column density of 6.0 ± 0.9 × 10{sup 15} cm{sup −2}. These values are comparable to those column densities/rotational temperatures reported in outflows emanating from low-mass stars. Extreme and moderate physical conditions to excite the maser and thermal emission coexist within the CH{sub 3}OH flow. Finally, we do not detect any complex molecules associated with the flow, e.g., CH{sub 3}OCHO, (CH{sub 3}){sub 2}CO, and CH{sub 3}CH{sub 2}CN.

79 ASTRONOMY AND ASTROPHYSICS↗

Optimization of extreme ultraviolet photons emission and collection in mass-limited laser produced plasmas for lithography application

The progress in development of commercial system for next generation EUV lithography requires, among other factors, significant improvement in EUV photon sources such as discharge produced plasma (DPP) and laser produced plasma (LPP) devices. There are still many uncertainties in determining the optimum device since there are many parameters for the suitable and efficient energy source and target configuration and size. Complex devices with trigger lasers in DPP or with pre-pulsing in LPP provide wide area for optimization in regards to conversion efficiency (CE) and components lifetime. We considered in our analysis a promising LPP source configuration using 10-30 {mu}m tin droplet targets, and predicted conditions for the most efficient EUV radiation output and collection as well as calculating photons source location and size. We optimized several parameters of dual-beam lasers and their relationship to target size. We used our HEIGHTS comprehensive and integrated full 3D simulation package to study and optimize LPP processes with various target sizes to maximize the CE of the system.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Noise generation by a lifting wing/flap combination at Reynolds numbers to 2.8 x 10 to the 6th

Measurements relating to the noise source location and intensity within various frequency bands were made for an 0.75 m-chord wing/flap model installed in the Ames 7 x 10-foot wind tunnel. A directional microphone system, located outside the open-wall tunnel was scanned in a two-dimensional array of aiming points about the positive-pressure side of the model to determine the principal locations of noise production, and the intensity of each of these. It was found for the case of the flaps being differentially deflected (0 deg, 35 deg) at the half-span station that noise production was concentrated in the immediate region of the resultant surface discontinuity. For equal deflection of the halves (0 deg, 0 deg or 35 deg, 35 deg), noise was produced uniformly along the length of the gap between the wing and the flap. Simulated flap-mounting brackets generated considerable noise in certain cases, but reduced the noise in others. Trailing edge noise did not appear to be important in comparison with other sources.

Kendall, J. M.↗

HIGH-FREQUENCY-PEAKED BL LACERTAE OBJECTS AS SPECTRAL CANDLES TO MEASURE THE EXTRAGALACTIC BACKGROUND LIGHT IN THE FERMI AND AIR CHERENKOV TELESCOPES ERA

The extragalactic background light (EBL) is the integrated light from all the stars that have ever formed, and spans the IR-UV range. The interaction of very high-energy (VHE: E > 100 GeV) {gamma}-rays, emitted by sources located at cosmological distances, with the intervening EBL results in e {sup -} e {sup +} pair production that leads to energy-dependent attenuation of the observed VHE flux. This introduces a fundamental ambiguity into the interpretation of measured VHE {gamma}-ray spectra: neither the intrinsic spectrum nor the EBL are separately known-only their combination is. In this Letter, we propose a method to measure the EBL photon number density. It relies on using simultaneous observations of BL Lac objects in the optical, X-ray, high-energy (HE: E > 100 MeV) {gamma}-ray (from the Fermi telescope), and VHE {gamma}-ray (from Cherenkov telescopes) bands. For each source, the method involves best-fitting the spectral energy distribution from optical through HE {gamma}-rays (the latter being largely unaffected by EBL attenuation as long as z {approx_lt} 1) with a synchrotron self-Compton model. We extrapolate such best-fitting models into the VHE regime and assume they represent the BL Lacs' intrinsic emission. Contrasting measured versus intrinsic emission leads to a determination of the {gamma}{gamma} opacity to VHE photons. Using, for each given source, different states of emission will only improve the accuracy of the proposed method. We demonstrate this method using recent simultaneous multifrequency observations of the high-frequency-peaked BL Lac object PKS 2155-304 and discuss how similar observations can more accurately probe the EBL.

79 ASTRONOMY AND ASTROPHYSICS↗

Measuring the Cryogenic Optical Alignment Between the Telescope Element and the Instruments Module of the James Webb Space Telescope

The alignment between the Aft Optical Subsystem (AOS) and the Integrated Science Instruments Module (ISIM) is non-adjustable in orbit, so the alignment must be carefully verified in a cryogenic vacuum environment prior to launch. Optical point source locations calibrated by optical metrology instruments are imaged through the AOS onto the Science Instruments to determine focal, lateral, and clock angle alignment. The pupil image of the AOS is overlaid onto the pupil image of the NIRCam to determine the tip and tilt alignment. In addition, an image from fiducial lights at the Primary Mirror checks the pupil alignment between the telescope entrance pupil, the telescope pupil mask, and the NIRCam aperture stop. The image positions are combined to determine the relative alignment between the Optical Telescope Element (OTE) and the ISIM in all six degrees of freedom with corresponding alignment uncertainties. Uncertainties in the position of focused images of the test sources and images from the pupils are derived from sensitivities of an optical model of the system and the Science Instrument sensing capability. Additional uncertainty in the pupil alignment measurement is due to uncertainty in the analytical removal of gravity effects that simulate the on-orbit alignment environment.

Whitman, Tony↗

PANDA-FES: Portable and Adaptable Neutron Diagnostics for Advancing Fusion Energy Science

Nuclear fusion is a potential source of carbon-free electricity with many concepts in development. The Portable and Adaptable Neutron Diagnostics for Advancing Fusion Energy Science (PANDA-FES) suite has been deployed since 2021 to measure neutron yield, energy, and spatiotemporal source location at two different Z-pinch fusion devices. This diagnostic can be used at a variety of facilities pursuing fusion in the magnetic, inertial, and magneto-inertial regimes. These different regimes have a wide range of time scales from less than 100 ns to a few μ s, neutron yields from 10 6 to 10 11 , and noise environments. Neutron yield is measured through activation of 79 Br and 89 Y with calibrated detectors. Temporal, spatial, and energy dependence of neutrons is measured with scintillators coupled to photomultiplier tubes (PMTs). Experimental setups and data analysis methods have been developed for these conditions. Finally, neutron yield, neutron energy anisotropy, and spatiotemporal evolution of the source have been measured.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The CME Flare Arcade and the Width of the CME in the Outer Corona

Moore, Sterling, & Suess (2007, ApJ, 668, 1221) present evidence that (1) a CME is typically a magnetic bubble, a low-beta gplasmoid with legs h having roughly the 3D shape of a light bulb, and (2) in the outer corona the CME plasmoid is in lateral pressure equilibrium with the ambient magnetic field. They present three CMEs observed by SOHO/LASCO, each from a very different source located near the limb. One of these CMEs came from a compact ejective eruption from a small part of a sunspot active region, another came from a large quiet-region filament eruption, and the third CME, an extremely large and fast one, was produced in tandem with an X20 flare arcade that was centered on a huge delta sunspot. Each of these CMEs had more or less the classic lightbulb silhouette and attained a constant heliocentric angular width in the outer corona. This indicates that the CME plasmoid attained lateral magnetic pressure balance with the ambient radial magnetic field in the outer corona. This lateral pressure balance, together with the standard scenario for CME production by the eruption of a sheared-core magnetic arcade, yields the following simple estimate of the strength B(sub Flare) of the magnetic field in the flare arcade produced together with the CME: B(sub Flare) 1.4(theta CME/theta Flare)sup 2 G, where theta (sub CME) is the heliocentric angular width of the CME plasmoid in the outer corona and theta (sub Flare) is the heliocentric angular width of the full-grown flare arcade. Conversely, theta (sub CME) approximately equal to (R(sub Sun)sup -1(phi(sub Flare)/1.4)sup 1/2 radians, where Flare is the magnetic flux covered by the full-grown flare arcade. In addition to presenting the three CMEs of Moore, Sterling, & Suess (2007) and their agreement with this relation between CME and Flare, we present a further empirical test of this relation. For CMEs that erupt from active regions, the co-produced flare arcade seldom if ever covers the entire active region: if AR is the total magnetic flux of the active region, Flare . AR, and we predict that CME. (R(sub Sun))sup -1(theta AR/1.4)sup 1/2 radians. For a random sample of 31 CMEs that erupted from active regions within 30 of the limb, for each CME we have measured CME from LASCO/C3 and have measured AR from a SOHO/MDI magnetogram of the source active region when it was within 30 of disk center. We find that each CME obeys the above predicted inequality, none having width greater than half of the upper bound given by theta(sub AR). Thus, an active region's magnetic flux content, together with its location on the solar disk, largely determines whether the active region can possibly produce a CME that is wide enough to intercept the Earth.

Moore, Ron↗

Fast ignitor target studies for the HiPER project

Target studies for the proposed High Power Laser Energy Research (HiPER) facility [M. Dunne, Nature Phys. 2, 2 (2006)] are outlined and discussed. HiPER will deliver a 3{omega} (wavelength {lambda}=0.35 {mu}m), multibeam, multi-ns pulse of about 250 kJ and a 2{omega} or 3{omega} pulse of 70-100 kJ in about 15 ps. Its goal is the demonstration of laser driven inertial fusion via fast ignition. The baseline target concept is a direct-drive single shell capsule, ignited by hot electrons generated by a conically guided ultraintense laser beam. The paper first discusses ignition and compression requirements, and presents gain curves, based on an integrated model including ablative drive, compression, ignition and burn, and taking the coupling efficiency {eta}{sub ig} of the igniting beam as a parameter. It turns out that ignition and moderate gain (up to 100) can be achieved, provided that adiabat shaping is used in the compression, and the efficiency {eta}{sub ig} exceeds 20%. Using a standard ponderomotive scaling for the hot electron temperature, a 2{omega} or 3{omega} ignition beam is required to make the hot electron range comparable to the desired size of the hot spot. A reference target family is then presented, based on one-dimensional fluid simulation of compression, and two-dimensional fluid and hybrid simulations of fast electron transport, ignition, and burn. The sensitivity to compression pulse shape, as well as to hot electron source location, hot electron range, and beam divergence is also discussed. Rayleigh-Taylor instability at the ablation front has been addressed by a model and a perturbation code. Simplified simulations of code-guided target implosions have also been performed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Acoustical evaluation of the NASA Lewis 9 by 15 foot low speed wind tunnel

The test section of the NASA Lewis 9- by 15-Foot Low Speed Wind Tunnel was acoustically treated to allow the measurement of acoustic sources located within the tunnel test section under simulated free field conditions. The treatment was designed for high sound absorption at frequencies above 250 Hz and to withstand tunnel airflow velocities up to 0.2 Mach. Evaluation tests with no tunnel airflow were conducted in the test section to assess the performance of the installed treatment. This performance would not be significantly affected by low speed airflow. Time delay spectrometry tests showed that interference ripples in the incident signal resulting from reflections occurring within the test section average from 1.7 dB to 3.2 dB wide over a 500 to 5150 Hz frequency range. Late reflections, from upstream and downstream of the test section, were found to be insignificant at the microphone measuring points. For acoustic sources with low directivity characteristics, decay with distance measurements in the test section showed that incident free field behavior can be measured on average with an accuracy of +/- 1.5 dB or better at source frequencies from 400 Hz to 10 kHz. The free field variations are typically much smaller with an omnidirectional source.

Dahl, Milo D.↗

Gallium oxide (Ga 2 O 3 ) energy dependent scintillation response to fast neutrons and flash gamma-rays

Gallium oxide is a newly emerged ultrawide bandgap (4.9 eV) semiconductor that is suitable as a combined electronics and radiation detection platform. We have experimentally demonstrated fast neutron and gamma-ray scintillation from Czochralski-grown β-Ga 2 O 3 in a recent series (October 2023) of experiments at the unmoderated pulsed neutron spallation source located at the Los Alamos Neutron Science Center. Using the neutron time-of-flight (TOF) technique and a fast-gated intensified CCD camera, we observed energy-dependent neutron scintillation for neutron energies ranging from 1 to 400 MeV, including the 14.1 MeV neutron energy relevant to D–T fusion. Neutron flux is quantified and calibrated by cascading the scintillator after the fission chamber, enabling a detailed analysis of temporal and energy-dependent characteristics of the scintillation events. Further, a pronounced scintillation signal from the spallation gamma flash with a temporal full width of half maximum of ~4 ns is indicative of the material’s rapid response. Neutron energy dependent scintillation is observed using the TOF method at a 22.6-m distance from the neutron source. These results highlight the possibility of developing a Ga 2 O 3 based fusion neutron diagnostic platform integrated with both scintillation and electronics functions on the integrated chip scale.

47 OTHER INSTRUMENTATION↗

On the optical counterparts, long-term variabilities, radio jets, and accretion sources in 1E 1740.7-2942 and GRS 1758-258

In this paper we discuss a variety of issues concerning the exciting and mysterious Galactic center gamma-ray sources 1E 1740.7-2942 and GRS 1758-258. We discuss the problem associated with the highly uncertain X-ray absorption column toward 1E 1740.7-2942 and use the recent Roentgen Satellite (ROSAT) results to narrow its range to 0.5-1 x 10(exp 23)/sq cm. Then the current upper limits from deep optical and near-IR searches of stellar objects at these source locations are plotted on an H-R diagram, from which we find the mass of a potential companion star of the (supposed) black hole in GRS 1758-258 to be less than 4 solar mass and in 1E 1740.7-2942 to be less than 9 solar mass. The observed well-collimated radio jets in 1E 1740.7-2942 require the existence of a stable accretion disk (presumably from binary accretion). The apparent association of 1E 1740.7-2942 with a high-density molecular cloud, on the other hand, points to possible accretion directly from the interstellar medium (ISM). We present an analysis of the energetics and kinematics of the radio jets in 1E 1740.7-2942. We present the long-term X-ray light curves of the two sources which include both the Granat/SIGMA's 3 yr monitoring data and all the data from previous imaging balloon and satellite observations over the last decade. The possible physical mechanisms responsible for producing both the long-term X-ray variations and the radio jets are postulated. We also consider Roche lobe-overflowing, low-mass X-ray binaries and Bondi-Hoyle accretion directly from a high-density surrounding medium. We propose a plausible scenario in which both sources are binary systems with a black hole primary and a low-mass companion and they are accreting mainly from the ISM at a rate self-regulated by the interaction between the accretion flow and the emerging hard X-ray flux.

Chen, Wan↗

STEREO WAVES Capabilities for Studying Initiation and Early-time Dynamics of Solar Eruptions

In 2006, NASA will launch the twin STEREO spacecraft from Kennedy Space Center into a pair of heliocentric orbits near 1 AU such that the spacecraft will move away from Earth (ahead and behind) at about 22 degrees per year. The purposes of the STEREO Mission are to understand the causes and mechanisms of coronal mass ejection (CME) initiation and to follow the propagation of CMEs through the heliosphere. Additionally, STEREO will study the mechanisms and sites of solar energetic particle (SEP) acceleration and determine 3-D time-dependent traces of the magnetic topology, temperature, density and velocity of the solar wind between the sun and Earth. To accomplish these goals, each STEREO spacecraft will be equipped with set of optical and particles and fields instruments including the STEREO WAVES (SWAVES) instrument which will use radio waves to track the location of CME-driven shocks (via type I1 bursts) and the 3-D topology of open field lines along which energetic particles flow (via the ubiquitous type I11 bursts). Type 11 bursts very often commence with a series of special type 111 bursts (called SA or type 111-L bursts) that likely coincide with CME liftoff time, thus SWAVES should be able to determine this time to within 15 sec. It is also known that the occurrence of SEP events is usually accompanied by type I1 radio bursts at decametric wavelengths as well as strong type III bursts at all wavelengths. SWAVES will be able to determine the initiation of these bursts to within 15 sec, and from the simultaneous measurements from the two spacecraft, should be able to triangulate their source locations. The utility of radio observations and the capabilities of SWAVES will be illustrated by showing a number of examples using the similar Wind WAVES instrument in combination with SOH0 coronagraph and RHESSI high energy X-ray/gamma ray observations.

Kaiser, M. L.↗