Search NASA⌕ Search

SEARCH · Search NASA

Results for “source separation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28

Fluid flow in solidifying monotectic alloys

Use of a two-wavelength holographic technique results in a simultaneous determination of temperature and composition profiles during directional solidification in a system with a miscibility gap. The relationships among fluid flow, phase separation, and mass transport during the solidification of the monotectic alloy are discussed. The primary sources of fluid motion in this system are buoyancy and thermocapillary forces. These forces act together when phase separation results in the formation of droplets (this occurs at the solid-liquid interface and in the bulk melt). In the absence of phase separation, buoyancy results from density gradients related to temperature and compositional gradients in the single-phase bulk melt. The effects of buoyancy are especially evident in association with water- or ethanol-rich volumes created at the solid-liquid growth interface.

Ecker, A.↗

The structure of radio sources 3C 273B and 3C 84 deduced from the 'closure' phases and visibility amplitudes observed with three-element interferometers

The derived 'closure' phase relation for a three-element interferometer is used in a presented analysis of data obtained from observations at 7.8 GHz of the radio sources 3C 273B and 3C 84 by antennas in Massachusetts, California, Alaska, and Sweden (the first two antennas were used in combination with each of the last two separately to form two three-element interferometers). The brightness distribution is found for each source by expansion of both the fringe amplitude and the fringe phase in separate Fourier series.

Rogers, A. E. E.↗

Guest Investigator Studies with the Compton Gamma Ray Observatory

The cumulative all-sky survey by the Compton Gamma Ray Observatory (CGRO), composed of data acquired during the first three years of the mission, included a number of regions of very limited exposure. The most glaring deficiency in coverage was toward the region of the South Galactic Pole (SGP), which received significantly less exposure than other directions- by a factor of at least 2 to 3. Furthermore, nearly all of the SGP exposure was accumulated during the first year of the mission. Since blazars are known to be time-variable, and of unknown duty cycle, a pointing of the CCRO in that direction was considered highly desirable, and long overdue. In addition, data gathered from a pointing toward the SGP and its comparison with comprehensive data available for the North Galactic Pole would be extremely valuable to investigators studying the extragalactic diffuse emission. The reasons outlined above prompted our initiation of a Cycle 4 campaign to systematically search with EGRET and COMPTEL for gamma-ray emission from sources near the South Galactic Pole. The Cycle 4 SGP campaign consisted of tnvo 14-day observations separated in in time by approximately 10 months. The temporal separation of the observations was requested to allow a test for possible variations in the detected sources. Our primary targets were 38 FSRQs which lie within 30 degrees of the SGP, and which satisfy the basic criteria for candidate gamma-ray AGNs,flat-spectrum radio sources, many of which exhibit blazar-type properties). These targets were selected from the standard references, and from the available on-line databases (e.g., the NASA Extragalactic Database, NED), as the most promising AGN targets in the vicinity of the SGP. A 30 radius from the SGP was chosen as the boundary of our survey, since the selected targets would then fall within the most sensitive portion of the fields of view of EGRET and COMPTEL (i.e., within a 30 zenith angle), for a CGRO pointing directed exactly at the SGP. Our South Galactic Pole Survey yielded a number of exciting results. The EGRET data were analyzed using the maximum likelihood techniques to estimate the intensity, spectrum, and position of gamma-ray sources in the field of view. Our analysis revealed four sources at energies greater than 100 MeV with likelihood ratios corresponding to greater than 30 detections (Vestrand et al. 1996). One of the sources is associated with the well known gamma-ray blazar PKS 0208-512, but the other three were previously unknown. Among the new detections was PKS 2155-304 which is often considered a prototype of the x-ray selected BL Lacs. PKS 2155-304, which was also detected at hard x-ray energies by CGRO/OSSE, is one of the brightest BL Lac objects in the sky at optical through x-ray energies and has a history of rapid, strong multiwavelength variability. As such, it has been the subject of intensive, contemporaneous, multiwavelength monitoring covering radio frequencies to x-ray energies.

Vestrand, W. T.↗

A feedback model for the source of auroral kilometric radiation

It is noted that in order to compensate for the wave refraction inside the source, the boundary reflection surfaces must converge with altitude, and this implies that the most likely auroral kilometric radiation source would be a thin, local density enhancement, since the refractive index contours at its boundaries would be expected to slope inward. The ISEE observations of multiple spectral components, which are attributed to separate oscillations at different altitudes in the same enhancement, indicate a source thickness as small as 25 km and an internal wave growth threshold of roughly 40 dB, rather than the 70-120 dB previously believed necessary to account for auroral kilometric radiation without feedback. What is considered more significant is that the feedback model accounts for numerous aspects of the auroral kilometric radiation behavior, predicts emission at the wave growth saturation level, and leads to the conclusion that auroral kilometric radiation originates at many compact sites, each emitting a nearly monochromatic wave.

Calvert, W.↗

In-situ ionothermal synthesis of nanoporous carbon/oxide composites: A new key to functional separators for stable lithium-sulfur batteries

Lithium-sulfur batteries (LSBs) with high energy density are promising for energy storage. However, conventional polypropylene-based separator cannot avoid polysulfides shuttling which impedes the practical application of LSBs. Herein, an in-situ ionothermal synthesis strategy that concurrently applies ionic liquid as the solvent, template and high-yield carbon source is proposed for the facile preparation of nanoporous carbon/oxide composite separator modifiers. The composites exhibit features of high polarity, self doping, oxygen vacancy, heteroatom doping, abundant defects and high electronic conductivity. Theoretical and experimental studies suggest that the composites can efficiently trap and convert polysulfides for high-performance LSBs. Indeed, in the composite-modified LSBs with next-generation roll-to-roll dry-processed high-loading sulfur cathodes, enhanced performance is achieved, revealing the effectiveness of the composites as functional materials towards separator modification. Therefore, the proposed strategy and its delivered nanoporous composites exhibit excellent versatility and practicality for high-performance LSBs.

25 ENERGY STORAGE↗

The 3-D description of vertical current sheets with application to solar flares

Following a brief review of the processes which have been suggested for explaining the occurrence of solar flares we suggest a new scenario which builds on the achievements of the previous suggestion that the current sheets, which develop naturally in 3-D cases with gravity from impacting independent magnetic structures (i.e., approaching current systems), do not consist of horizontal currents but are instead predominantly vertical current systems. This suggestion is based on the fact that as the subphotospheric sources of the magnetic field displace the upper photosphere and lower chromosphere regions, where plasma beta is near unity, will experience predominantly horizontal mass motions which will lead to a distorted 3-D configurations of the magnetic field having stored free energy. In our scenario, a vertically flowing current sheet separates the plasma regions associated with either of the subphotospheric sources. This reflects the balanced tension of the two stressed fields which twist around each other. This leads naturally to a metastable or unstable situation as the twisted field emerges into a low beta region where vertical motions are not inhibited by gravity. In our flare scenario the impulsive energy release occurs, initially, not by reconnection but mainly by the rapid change of the magnetic field which has become unstable. During the impulsive phase the field lines contort in such way as to realign the electric current sheet into a minimum energy horizontal flow. This contortion produces very large electric fields which will accelerate particles. As the current evolves to a horizontal configuration the magnetic field expands vertically, which can be accompanied by eruptions of material. The instability of a horizontal current is well known and causes the magnetic field to undergo a rapid outward expansion. In our scenario, fast reconnection is not necessary to trigger the flare, however, slow reconnection would occur continuously in the current layer at the locations of potential flaring. During the initial rearrangement of the field strong plasma turbulence develops. Following the impulsive phase, the final current sheet will experience faster reconnection which we believe responsible for the gradual phase of the flare. The reconnection will dissipate part of the current and will produce sustained and extended heating in the flare region and in the postflare loops.

Fontenla, Juan M.↗

Quantifying Moisture Sources of Arctic Atmospheric Rivers During the Recent Historical Period

Atmospheric rivers (ARs), filaments of intense atmospheric moisture transport, play a significant role in delivering moisture poleward into the Arctic and triggering weather extremes. Although previous studies have focused on large‐scale circulations driving these events, this study investigates ARs through attributing their moisture sources using the Community Atmosphere Model version 5 (CAM5) with moisture‐tagging capability. Examining ARs in the Atlantic and Pacific sectors of the Arctic separately revealed distinct contributions from remote versus local, and ocean versus land, moisture sources. Unlike non‐AR events, Arctic ARs primarily draw moisture from their respective ocean basins in lower‐latitude regions during the cold season, and shift to land sources in the warm season. Cold‐season ARs in the Atlantic and Pacific sectors source 73.2% and 85.3% of their moisture from their respective ocean basins at lower latitudes, however warm‐season contributions decrease to 41.3% and 29.4%. In contrast, mid‐ and high‐latitude continents combined contribute 40.1% and 51.3% in the warm season. Trajectory clustering analysis shows that AR moisture sources depend on both their genesis regions and transport pathways. In recent decades, the Arctic has experienced a moistening trend in both the cold and warm seasons. Our results suggest that local and remote sources equally drive the observed cold‐season moistening, whereas remote sources predominantly drive the warm‐season moistening. A better understanding of Arctic AR moisture sources under current climate conditions provides valuable insights into their potential future changes amid the projected heterogeneous northern hemispheric warming.

Arctic↗

REDOTHERM: a thermodynamic modeling framework for redox-based thermochemical processes

Two-step thermochemical redox cycles are being developed as a potential pathway for the production of hydrogen and syngas. While there are many possible reactor and system configurations, moving oxide systems are considered promising in terms of the redox thermodynamics, due to the potential implementation of a countercurrent system that can achieve higher performance compared to other configurations. There is a lack of a robust thermodynamic modeling framework in the field, with multiple models incorporating incorrect thermodynamic assumptions that violate the second law of thermodynamics. We present in this work REDOTHERM, an open-source system model for moving oxides that incorporates the correct thermodynamic limits, as well as various options for the system auxiliary units including product separation, heat recovery, and oxygen removal. The model is agnostic to the energy source, and could be used for solar thermal or other configurations. We highlight the uses of this model, presenting some of the tradeoffs and challenges in redox-active material selection and how they affect the entire thermochemical hydrogen production process. This model could be easily adapted and used for material exploration, system/reactor design, and technoeconomic analysis.

08 HYDROGEN↗

Preliminary Node Separation Orbit Determination Analysis for the HelioSwarm Observatory

The HelioSwarm Observatory is a nine-spacecraft swarm design, consisting of one Hub and eight Node spacecraft co-orbiting the Earth in a ~13.7-day orbit. Each Node separates from the Hub during the Node Commissioning Phase, and the Nodes’ sole source of tracking is inter-satellite relative ranging with the Hub. This study characterizes how soon the relative ranging should occur post-separation to maintain a reasonable knowledge of the Nodes’ position relative to the hub and quantifies how often, and at what measurement cadence, relative ranging needs to occur during the early days of commissioning.

orbit determination↗

Moderate resolution spectroscopy for the Space Infrared Telescope Facility (SIRTF)

The conceptual design presented for a low-to-moderate resolution IR spectrometer is expected to allow the spectroscopic study of objects whose location ranges from within the solar system to distant galaxies, with far greater sensitivity than previously available for the study of faint objects. The low resolution mode will allow detailed continuum radiation studies to be conducted, while the moderate resolution mode will facilitate studies encompassing the IR spectral signatures of small outer solar system bodies and the nature of more luminous active galaxies and QSOs at greater distances. The five spectrometer modules share a common aperture, and all gratings share a single scan mechanism. All heat sources other than the detectors operate at 7 K and are separated from the 4 K cold station. Two-dimensional area detector arrays are used in the 2.5- to 120-micron bands to simultaneously monitor adjacent regions in extended objects and to measure the background near point sources.

Houck, J. R.↗

Gamma-ray burst source locations

Instrumentation for observing cosmic gamma-ray bursts has been provided for widely separated spacecraft, including the Pioneer Venus Orbiter, ISEE-3, Helios-B, Venera 10 and 11, and Prognoz 7. Simultaneous observations have been made of several gamma bursts with various combinations of these spacecraft and near-earth satellites. Locations of the gamma-burst sources have been calculated for those events where precise timing and ephemeris data are available. The results of optical and HEAO-B observations of the resultant error boxes will be discussed.

Evans, W. D.↗

Active Sonic Boom Control

A theory and simulation code are developed to study nonsteady sources as means to control sonic booms of supersonic aircraft. A key result is that the source of sonic boom pressure is not confined to the length of the aircraft but occupies an extensive segment of flight path. An aircraft in nonsteady flight functions as a synthetic aperture antenna, generating complex acoustic waves with no simple relation to instantaneous volume or lift distributions. The theory applies linear acoustics to slender nonsteady sources but requires no far field approximation. The solution for pressure contains a term not seen in Whitham's theory for sonic booms of distant supersonic aircraft. The term describes a pressure field that decays algebraically behind the Mach cone and, in the case of steady flight, integrates to a ground load equal to the weight of the aircraft. The algebraic term is separate from those that describe the sonic boom. Two nonsteady source phenomena are evaluated: periodic velocity changes (surge), and periodic longitudinal lift redistribution (slosh). Surge can attenuate a sonic boom and convert it into prolonged weak reverberation, but accelerations needed to produce the phenomenon seem too large for practical use. Slosh may be practical and can alter sonic booms but does not, on the average, result in boom attenuation. The conclusion is that active sonic boom abatement is possible in theory but maybe not practical

Crow, Steven C.↗

Magnetic beneficiation of lunar soils

We will present a review of recent laboratory results obtained in dry magnetic separation of one gram samples of the minus 1 mm size fraction of five lunar soils of widely differing maturities. Two highland soils were investigated as potential sources of low iron content feed stocks for space manufacture of metals, including aluminum, silicon, and calcium. Pure anorthite was separated from the diamagnetic fraction of immature highland regolith. Three high titanium mare soils were investigated as potential sources of ilmenite for production of hydrogen and for recovery of He-3. Ilmenite and pyroxene were separated from the paramagnetic fractions of the mare basalts. Agglutinates and other fused soil components containing metallic iron were separated from the strongly magnetic fractions of all soils. We will present conceptual magnetic separation flow sheets developed from the laboratory data and designed for production of anorthite from highland soils and for production of ilmenite from mare soils. Using these flow sheets, we will discuss problems and opportunities associated with the magnetic separation of lunar soils. Separation of high-grade anorthite or other diamagnetic components at moderately high recovery can be achieved in processing immature highland soils. Further, while magnet weight is always an issue in magnetic separation technology, recent developments in both low temperature and high temperature superconductivity present unusual opportunities for magnet design specific to the lunar environment.

Mckay, D. S↗

Jet Noise Physics and Modeling Using First-principles Simulations

An extensive analysis of our jet DNS database has provided for the first time the complex correlations that are the core of many statistical jet noise models, including MGBK. We have also for the first time explicitly computed the noise from different components of a commonly used noise source as proposed in many modeling approaches. Key findings are: (1) While two-point (space and time) velocity statistics are well-fitted by decaying exponentials, even for our low-Reynolds-number jet, spatially integrated fourth-order space/retarded-time correlations, which constitute the noise "source" in MGBK, are instead well-fitted by Gaussians. The width of these Gaussians depends (by a factor of 2) on which components are considered. This is counter to current modeling practice, (2) A standard decomposition of the Lighthill source is shown by direct evaluation to be somewhat artificial since the noise from these nominally separate components is in fact highly correlated. We anticipate that the same will be the case for the Lilley source, and (3) The far-field sound is computed in a way that explicitly includes all quadrupole cancellations, yet evaluating the Lighthill integral for only a small part of the jet yields a far-field noise far louder than that from the whole jet due to missing nonquadrupole cancellations. Details of this study are discussed in a draft of a paper included as appendix A.

Freund, Jonathan B.↗

Chronology and genesis of high-Ti mare volcanism: Melting of cogenetic depleted and enriched reservoirs

An understanding of the chronology and petrogenesis of volcanic rocks is paramount to unravelling the complexities of the composition and structure of the mantle of the Moon. High-Ti mare basalts represent the best-sampled suite of lunar volcanic rocks and likely represent melts of the uppermost mantle of the Moon. Compiled Nd and Sr isotopic data for high-Ti basalts, combined with weighted average ages determiend by various techniques, yield a complex melting history for the high-Ti mantle source. Melting occurred during three distinct episodes (3.84 Ga, 3.75-3.69 Ga, and 3.56 Ga) separated by hiatuses of 100 Ma or more. The first episode included the melting of a relatively trapped liquid (KREEPy)-rich source beneath the A-11 landing site. Later melting of this source produced magmas which were relatively trapped liquid-free at the A-11 site. Synchronous melting at the A-17 landing site produced magmas with variable proportions of this evolved trapped liquid component. The final phase of volcanism occurred at the A-11 site and involved the assimilation of an evolved 'neuKREEP' component. Continued melting of a similar source, which was nearly exhausted of its ilmenite component, beneath the A-12 landing site may have lead to production of magmas parental to the A-12 ilmenite basalts.

Snyder, Gregory A.↗

Yosemite Conference on Ionospheric Plasma in the Magnetosphere: Sources, Mechanisms and Consequences, meeting report

The sixth biennial Yosemite topical conference and the first as a Chapman Conference was held on February 3 to 6, 1986. Due to the recent changes in our perception of the dynamics of the ionospheric/magnetospheric system, it was deemed timely to bring researchers together to discuss and contrast the relative importance of solar versus terrestrial sources of magnetospheric plasma. Although the solar wind was once thought to dominate the supply of plasma in the Earth's magnetosphere, it is now thought that the Earth's ionosphere is a significant contributor. Polar wind and other large volume outflows of plasma have been seen at relatively high altitudes over the polar cap and are now being correlated with outflows found in the magnetotail. The auroral ion fountain and cleft ion fountain are examples of ionospheric sources of plasma in the magnetosphere, observed by the Dynamics Explorer 1 (DE 1) spacecraft. The conference was organized into six sessions: four consisting of prepared oral presentations, one poster session, and one session for open forum discussion. The first three oral sessions dealt separately with the three major topics of the conference, i.e., the sources, mechanisms, and consequences of ionospheric plasma in the magnetosphere. A special session of invited oral presentations was held to discuss extraterrestrial ionospheric/magnetospheric plasma processes. The poster session was extended over two evenings during which presenters discussed their papers on a one-on-one basis. The last session of the conferences was reserved for open discussions of those topics or ideas considered most interesting or controversial.

Gallagher, D. L.↗

A Second Look at 12 Candidate Dual AGNs Using BAYMAX

We present an analysis of 12 optically selected dual active galactic nucleus (AGN) candidates at z < 0.34. Each candidate was originally identified via double-peaked [O III] λ5007 emission lines and received follow-up Chandra and Hubble Space Telescope (HST) observations. Because the X-ray data are low-count (<100 counts) with small separations (<1''), a robust analysis is necessary for classifying each source. Pairing long-slit [O III] observations with existing Chandra observations, we re-analyze the X-ray observations with Bayesian AnalYsis of AGNs in X-rays to determine whether the X-ray emission from each system is more likely a single or dual point source. We find that 4 of the 12 sources are likely dual X-ray point-source systems. We examine each point source's spectra via a Monte Carlo method that probabilistically identifies the likely origin of each photon. When doing so, we find that (i) the secondary X-ray point sources in two of the systems have L(X)< 10(exp 40) erg/s, such that we cannot rule out a non-AGN origin, (ii) one source has a secondary with L(X)> 10(exp 40) erg/s but a spectrum that is too soft to definitively preclude being X-ray emitting diffuse gas that was photoionized by the primary AGN, and (iii) one system (SDSS J1126+2944) is a dual AGN. Additionally, using complementary HST observations, we analyze a subsample of systems that are visually identified as merging. Our results suggest that dual AGNs may preferentially reside in mergers with small separations, consistent with both simulations and observations.

Adi Foord↗

Separate visual representations for perception and for visually guided behavior

Converging evidence from several sources indicates that two distinct representations of visual space mediate perception and visually guided behavior, respectively. The two maps of visual space follow different rules; spatial values in either one can be biased without affecting the other. Ordinarily the two maps give equivalent responses because both are veridically in register with the world; special techniques are required to pull them apart. One such technique is saccadic suppression: small target displacements during saccadic eye movements are not preceived, though the displacements can change eye movements or pointing to the target. A second way to separate cognitive and motor-oriented maps is with induced motion: a slowly moving frame will make a fixed target appear to drift in the opposite direction, while motor behavior toward the target is unchanged. The same result occurs with stroboscopic induced motion, where the frame jump abruptly and the target seems to jump in the opposite direction. A third method of separating cognitive and motor maps, requiring no motion of target, background or eye, is the Roelofs effect: a target surrounded by an off-center rectangular frame will appear to be off-center in the direction opposite the frame. Again the effect influences perception, but in half of the subjects it does not influence pointing to the target. This experience also reveals more characteristics of the maps and their interactions with one another, the motor map apparently has little or no memory, and must be fed from the biased cognitive map if an enforced delay occurs between stimulus presentation and motor response. In designing spatial displays, the results mean that what you see isn't necessarily what you get. Displays must be designed with either perception or visually guided behavior in mind.

Bridgeman, Bruce↗