Search NASA⌕ Search

SEARCH · Search NASA

Results for “surface codes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28

Wave dispersion in the hybrid-Vlasov model: Verification of Vlasiator

Vlasiator is a new hybrid-Vlasov plasma simulation code aimed at simulating the entire magnetosphere of the Earth. The code treats ions (protons) kinetically through Vlasov's equation in the six-dimensional phase space while electrons are a massless charge-neutralizing fluid [M. Palmroth et al., J. Atmos. Sol.-Terr. Phys. 99, 41 (2013); A. Sandroos et al., Parallel Comput. 39, 306 (2013)]. For first global simulations of the magnetosphere, it is critical to verify and validate the model by established methods. Here, as part of the verification of Vlasiator, we characterize the low-β plasma wave modes described by this model and compare with the solution computed by the Waves in Homogeneous, Anisotropic Multicomponent Plasmas (WHAMP) code [K. Rönnmark, Kiruna Geophysical Institute Reports No. 179, 1982], using dispersion curves and surfaces produced with both programs. The match between the two fundamentally different approaches is excellent in the low-frequency, long wavelength range which is of interest in global magnetospheric simulations. The left-hand and right-hand polarized wave modes as well as the Bernstein modes in the Vlasiator simulations agree well with the WHAMP solutions. Vlasiator allows a direct investigation of the importance of the Hall term by including it in or excluding it from Ohm's law in simulations. This is illustrated showing examples of waves obtained using the ideal Ohm's law and Ohm's law including the Hall term. Our analysis emphasizes the role of the Hall term in Ohm's law in obtaining wave modes departing from ideal magnetohydrodynamics in the hybrid-Vlasov model.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Global 3D Braginskii simulations of the tokamak edge region of IWL discharges

A study of plasma turbulence and profile evolution in conditions of low (L-mode) and high (H-mode) confinement at the edge of an axisymmetric, nested circular flux-surface approximation to an inner wall limited (IWL) Alcator C-Mod discharge is presented, using numerical simulations with the global drift-ballooning (GDB) code. Further, GDB solves drift-reduced Braginskii two-fluid equations for electromagnetic low-frequency turbulence in a 3D annulus centered on the last closed flux-surface (LCFS). Three simulations that investigate the conditions of a reference L-mode, a high density, and a high temperature (or H-mode-like) shot were performed using realistic parameters. L-mode transport appears to be largely driven by drift resistive ballooning structures. Its pressure profile exhibits a near-SOL breakpoint that Mirror Langmuir Probes (MLP) detect in C-Mod. The high density simulation sees an increase in the size of convective cells and enhanced turbulent transport, while H-mode conditions develop improved confinement, balanced $E$ x $B$ and ion diamagnetic drifts in the closed-flux region, and spontaneous generation of temperature pedestal with a density pedestal remaining absent. A statistical characterization of the turbulence both in the SOL and the closed-flux region is presented.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Engineering design of vertical test stand cryostat

Under Indian Institutions and Fermilab collaboration, Raja Ramanna Centre for Advanced Technology and Fermi National Accelerator Laboratory are jointly developing 2K Vertical Test Stand (VTS) cryostats for testing SCRF cavities at 2K. The VTS cryostat has been designed for a large testing aperture of 86.36 cm for testing of 325 MHz Spoke resonators, 650 MHz and 1.3 GHz multi-cell SCRF cavities for Fermilab's Project-X. Units will be installed at Fermilab and RRCAT and used to test cavities for Project-X. A VTS cryostat comprises of liquid helium (LHe) vessel with internal magnetic shield, top insert plate equipped with cavity support stand and radiation shield, liquid nitrogen (LN{sub 2}) shield and vacuum vessel with external magnetic shield. The engineering design and analysis of VTS cryostat has been carried out using ASME B&PV Code and Finite Element Analysis. Design of internal and external magnetic shields was performed to limit the magnetic field inside LHe vessel at the cavity surface <1 {micro}T. Thermal analysis for LN{sub 2} shield has been performed to check the effectiveness of LN{sub 2} cooling and for compliance with ASME piping code allowable stresses.

43 PARTICLE ACCELERATORS↗

N-TiO2 nanoparticles embedded in silica prepared by Ti ion implantation and annealing in nitrogen

Room temperature Ti ion implantation and subsequent thermal annealing in N2 ambience have been used to fabricate the anatase and rutile structured N-doped TiO2 particles embedded in the surface region of fused silica. The Stopping and Range of Ions in Matter (SRIM) code simulation indicates a Gaussian distribution of implanted Ti, with a projected range of 74.4 nm and straggling of 16.5 nm. However, Rutherford backscattering spectrometry and transmission electron microscopy results show a much shallower distribution peaked at ~ 30 nm. Significant sputtering loss of silica substrates has occurred during implantation. Nanoparticles with size of 10-20 nm in diameter have formed after implantation. X-ray photoelectron spectroscopy indicates the coexistence of TiO2 and metallic Ti in the as-implanted samples. Metallic Ti is oxidized to anatase TiO2 after annealing at 600ºC, while rutile TiO2 forms by phase transformation after annealing at 900ºC. At the same time, N-Ti-O, Ti-O-N and/or Ti-N-O linkages have formed in the lattice of TiO2. A red shift of 0.34 eV in the absorption edge is obtained for N-doped anatase TiO2 after annealing at 600 ºC for 6 h. The absorbance increases in the ultraviolet and visible waveband.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Powerloads on the front end components and the duct of the heating and diagnostic neutral beam lines at ITER

The heating and current drive beam lines (HNB) at ITER are expected to deliver ∼16.7 MW power per beam line for H beams at 870 keV and D beams at 1 MeV during the H-He and the DD/DT phases of ITER operation respectively. On the other hand the diagnostic neutral beam (DNB) line shall deliver ∼2 MW power for H beams at 100 keV during both the phases. The path lengths over which the beams from the HNB and DNB beam lines need to be transported are 25.6 m and 20.7 m respectively. The transport of the beams over these path lengths results in beam losses, mainly by the direct interception of the beam with the beam line components and reionisation. The lost power is deposited on the surfaces of the various components of the beam line. In order to ensure the survival of these components over the operational life time of ITER, it is important to determine to the best possible extent the operational power loads and power densities on the various surfaces which are impacted by the beam in one way or the other during its transport. The main factors contributing to these are the divergence of the beamlets and the halo fraction in the beam, the beam aiming, the horizontal and vertical misalignment of the beam, and the gas profile along the beam path, which determines the re-ionisation loss, and the re-ionisation cross sections. The estimations have been made using a combination of the modified version of the Monte Carlo Gas Flow code (MCGF) and the BTR code. The MCGF is used to determine the gas profile in the beam line and takes into account the active gas feed into the ion source and neutraliser, the HNB-DNB cross over, the gas entering the beamline from the ITER machine, the additional gas atoms generated in the beam line due to impacting ions and the pumping speed of the cryopumps. The BTR code has been used to obtain the power loads and the power densities on the various surfaces of the front end components and the duct modules for different scenarios of ITER operation. The gas profile and the magnetic field distribution for each scenario has been considered in these evaluations. The worst case power loads and power densities for each surface have been used to study their thermo-mechanical behaviour and manufacturing feasibility. The details of these calculations and results obtained are presented and discussed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Two-fluid equilibrium with flow: FLOW2

The effects of finite macroscopic velocities on axisymmetric ideal equilibria are examined using the two-fluid (ions and electrons) model. A new equilibrium solver, the code FLOW2, is introduced for the two-fluid model and used to investigate the importance of various flow patterns on the equilibrium of tight aspect ratio (NSTX) and regular tokamak (DIII-D) configurations. Several improvements to the understanding and calculation of two-fluid equilibria are presented, including an analytical and numerical proof of the single-fluid and static limits of the two-fluid model, a discussion of boundary conditions, a user-friendly free-function formulation, and the explicit evaluation of velocity components normal to magnetic surfaces.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Effects of emitting surfaces and trapped ions on the sheath physics and current flow in multidimensional plasma systems

Recent one-dimensional simulations of planar sheaths with strong electron emission have shown that trapping of charge-exchange ions causes transitions from space-charge limited (SCL) to inverse sheaths. However, multidimensional emitting sheath phenomena with collisions remained unexplored, due in part to high computational cost. As such, we developed a novel continuum kinetic code to study the sheath physics, current flow and potential distributions in two-dimensional unmagnetized configurations with emitting surfaces. For small negatively biased thermionic cathodes in a plasma, the cathode sheath can exist in an equilibrium SCL state. The SCL sheath carries an immense density of trapped ions, neutralized by thermoelectrons, within the potential well of the virtual cathode. For further increases of emitted flux, the trapped ion cloud expands in space. The trapped ion space charge causes an increase of thermionic current far beyond the saturation limit predicted by conventional collisionless SCL sheath models without ion trapping. For sufficiently strong emission, the trapped ion cloud consumes the entire 2D plasma domain, forming a mode with globally confined ions and an inverse sheath at the cathode. In situations where the emitted flux is fixed and the bias is swept (e.g. emissive probe), the trapped ions cause a large thermionic current to escape for all biases below the plasma potential. Strong suppression of the thermionic emission, required for the probe to float, only occurs when the probe is above the plasma potential.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

An In-situ materials analysis particle probe (MAPP) diagnostic to study particle density control and hydrogenic fuel retention in NSTX

A new materials analysis particle probe (MAPP) was designed, constructed and tested to develop understanding of particle control and hydrogenic fuel retention in lithium-based plasma-facing surfaces in NSTX. The novel feature of MAPP is an in-situ tool to probe the divertor NSTX floor during LLD and lithium-coating shots with subsequent transport to a post-exposure in-vacuo surface analysis chamber to measure D retention. In addition, the implications of a lithiated graphite-dominated plasma-surface environment in NSTX on LLD performance, operation and ultimately hydrogenic pumping and particle control capability are investigated in this proposal. MAPP will be an invaluable tool for erosion/redeposition simulation code validation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

SU-F-T-28: Evaluation of BEBIG HDR Co-60 After-Loading System for Skin Cancer Treatment Using Conical Surface Applicator

Purpose: To evaluate the possibility of utilizing the BEBIG HDR 60Co remote after-loading system for malignant skin surface treatment using Monte Carlo (MC) simulation technique. Methods: First TG-43 parameters of BEBIG-Co-60 and Nucletron Ir-192-mHDR-V2 brachytherapy sources were simulated using MCNP6 code to benchmark the sources against the literature. Second a conical tungsten-alloy with 3-cm diameter of Planning-Target-Volume (PTV) at surface for use with a single stepping HDR source is designed. The HDR source is modeled parallel to treatment plane at the center of the conical applicator with a source surface distance (SSD) of 1.5-cm and a removable plastic end-cap with a 1-mm thickness. Third, MC calculated dose distributions from HDR Co-60 for conical surface applicator were compared with the simulated data using HDR Ir-192 source. The initial calculations were made with the same conical surface applicator (standard-applicator) dimensions as the ones used with the Ir-192 system. Fourth, the applicator wall-thickness for the Co-60 system was increased (doubled) to diminish leakage dose to levels received when using the Ir-192 system. With this geometry, percentage depth dose (PDD), and relative 2D-dose profiles in transverse/coronal planes were normalized at 3-mm prescription-depth evaluated along the central axis. Results: PDD for Ir-192 and Co-60 were similar with standard and thick-walled applicator. 2D-relative dose distribution of Co-60, inside the standard-conical-applicator, generated higher penumbra (7.6%). For thick-walled applicator, it created smaller penumbra (<4%) compared to Ir-192 source in the standard-conicalapplicator. Dose leakage outside of thick-walled applicator with Co-60 source was approximately equal (≤3%) with standard applicator using Ir-192 source. Conclusion: Skin cancer treatment with equal quality can be performed with Co-60 source and thick-walled conical applicators instead of Ir-192 with standard applicators. These conical surface applicator must be used with a protective plastic end-cap to eliminate electron contamination and over-dosage of the skin.

60 APPLIED LIFE SCIENCES↗

Ab-Initio Investigation of Finite Size Effects in Rutile Titania Nanoparticles with Semilocal and Nonlocal Density Functionals

In this work, we employ hybrid and generalized gradient approximation (GGA) level density functional theory (DFT) calculations to investigate the convergence of surface properties and electronic gap of rutile titania nanoparticles with particle size. The surface energies and electronic gaps are calculated for cuboidal particles with minimum dimension ranging from 3.7 Angstrom (24 atoms) to 10.3 Angstrom (384 atoms) using a highly-parallel real-space DFT code to enable hybrid level DFT calculations of larger nanoparticles than are typically practical. We deconvolute the geometric and electronic finite size effects in surface energy, and evaluate the influence of defects on electronic gap and density of states (DOS). The electronic finite size effects in surface energy vanish when the minimum length scale of the nanoparticles becomes greater than 10 Angstrom. We show that this length scale is consistent with a computationally efficient numerical analysis of the characteristic length scale of electronic interactions. The surface energy of nanoparticles having minimum dimension beyond this characteristic length can be approximated using slab calculations that account for the geometric defects. In contrast, the finite size effects on the electronic gap and DOS is highly dependent on the shape and size of these particles. Furthermore, the DOS for cuboidal particles and more realistic particles constructed using the Wulff algorithm reveal that defect states within the electronic gap play a key role in determining the eigen value distribution of nanoparticles and the electronic gap does not converge to the bulk limit for the particle sizes investigated.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Non-adiabatic Excited State Molecule Dynamics Modeling of Photochemistry and Photophysics of Materials

Understanding and controlling excited state dynamics lies at the heart of all our efforts to design photoactive materials with desired functionality. This tailor-design approach has become the standard for many technological applications (e.g., solar energy harvesting) including the design of organic conjugated electronic materials with applications in photovoltaic and light-emitting devices. Over the years, our team has developed efficient LANL-based codes to model the relevant photophysical processes following photoexcitation (spatial energy transfer, excitation localization/delocalization, and/or charge separation). The developed approach allows the non-radiative relaxation to be followed on up to ~10 ps timescales for large realistic molecules (hundreds of atoms in size) in the realistic solvent dielectric environment. The Collective Electronic Oscillator (CEO) code is used to compute electronic excited states, and the Non-adiabatic Excited State Molecular Dynamics (NA-ESMD) code is used to follow the non-adiabatic dynamics on multiple coupled Born-Oppenheimer potential energy surfaces. Our preliminary NA-ESMD simulations have revealed key photoinduced mechanisms controlling competing interactions and relaxation pathways in complex materials, including organic conjugated polymer materials, and have provided a detailed understanding of photochemical products and intermediates and the internal conversion process during the initiation of energetic materials. This project will be using LANL-based CEO and NA-ESMD codes to model nonradiative relaxation in organic and energetic materials. The NA-ESMD and CEO codes belong to a class of electronic structure/quantum chemistry codes that require large memory, “long-queue-few-core” distribution of resources in order to make useful progress. The NA-ESMD simulations are trivially parallelizable requiring ~300 processors for up to one week runtime to reach a meaningful restart point.

36 MATERIALS SCIENCE↗

Simulation of plasma and neutral transport in PISCES-RF using SOLPS-ITER

In this research, the fluid plasma transport code SOLPS-ITER is applied and validated against experimental data from the plasma interaction surface component experimental station (PISCES)-RF linear plasma device to establish a physics basis for plasma and neutral transport in its two magnetic field (B-field) geometry setups-(1)the cusp and (2) non-cusp or linear B-field. The main focus of this study is to understand (1) radial plasma transport (2) heat and particle loads on the upstream dump and downstream target plate, and (3) the physics of plasma-neutral interactions in PISCES-RF. The simulation setup adheres to typical PISCES-RF experimental conditions, with a 2D helicon power deposition profile as an input heating source. SOLPS-ITER simulations reproduce experimental conditions with the Bohm diffusion model for both B-field configurations of the PISCES-RF experiment. Major energy loss channels include neutral radiation and power deposited on the wall and dump plate, with only 1% of the input power reaching the target. The ionization front is well confined near the dump plate due to the heating and puffing regions. Additionally, SOLPS-ITER simulation results are also found to be in very good agreement with the particle-in-cell calculations using the code-PICOS++ which supports the validity of SOLPS in low collisionality regime.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Algorithmic Improvements to MCNP5 for High-Resolution Fusion Neutronics Analyses

Neutronics analyses of the ITER experimental fusion reactor rely on increasingly complex geometry models and estimates of energy-dependent neutron flux and radiation dose-rate distributions generated at ever higher resolutions. There are significant practical challenges with applying the Monte Carlo N-Particle (MCNP) continuous-energy transport code to high-resolution analyses. For models consisting of more than 100 000 surfaces and cells, geometry initialization can take several hours, thus slowing down model integration and transport analysis efforts. In multithreaded simulations, the amount of memory consumed by superimposed mesh tally data increases in proportion to the number of threads. This behavior limits either the tally resolution or the number of processor cores that can be utilized in the simulation. This paper describes algorithmic improvements that were implemented in a modified version of MCNP5 to overcome these limitations. These improvements are referred to as the Oak Ridge National Laboratory Transformative Neutronics (ORNL-TN) upgrade. Here, a comparison of the performance and memory usage of both MCNP5 and ORNL-TN on several relevant fusion neutronics models is presented. In these tests and in actual high-resolution neutronics analyses, ORNL-TN reduces geometry processing times from hours to a few seconds and increases in-memory mesh tally capacity from the order of 10 8 to 10 10 space-energy bins.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

MULTI-DIMENSIONAL SIMULATIONS OF ROTATING PAIR-INSTABILITY SUPERNOVAE

We study the effects of rotation on the dynamics, energetics, and {sup 56}Ni production of pair instability supernova (PISN) explosions by performing rotating two-dimensional ({sup 2}.5D{sup )} hydrodynamics simulations. We calculate the evolution of eight low-metallicity (Z = 10{sup –3}, 10{sup –4} Z{sub ☉}) massive (135-245 M{sub ☉}) PISN progenitors with initial surface rotational velocities of 50% of the critical Keplerian value using the stellar evolution code MESA. We allow for both the inclusion and the omission of the effects of magnetic fields in the angular momentum transport and in chemical mixing, resulting in slowly rotating and rapidly rotating final carbon-oxygen cores, respectively. Increased rotation for carbon-oxygen cores of the same mass and chemical stratification leads to less energetic PISN explosions that produce smaller amounts of {sup 56}Ni due to the effect of the angular momentum barrier that develops and slows the dynamical collapse. We find a non-monotonic dependence of {sup 56}Ni production on rotational velocity in situations when smoother composition gradients form at the outer edge of the rotating cores. In these cases, the PISN energetics are determined by the competition of two factors: the extent of chemical mixing in the outer layers of the core due to the effects of rotation in the progenitor evolution and the development of angular momentum support against collapse. Our 2.5D PISN simulations with rotation are the first presented in the literature. They reveal hydrodynamic instabilities in several regions of the exploding star and increased explosion asymmetries with higher core rotational velocity.

79 ASTRONOMY AND ASTROPHYSICS↗

Recent progress on neoclassical impurity transport in stellarators with implications for a stellarator reactor

Accumulation of impurities in the core of the plasma is a potential problem for any fusion reactor, and is thought to be especially problematic for stellarators. We use the collisional transport code SFINCS to calculate, in a reactor stellarator scenario, the effects of flux-surface electrostatic potential variation on tungsten transport. The potential variation is found to have a large effect on the transport, reversing the sign of the transport coefficients related to the radial electric field and the bulk ion temperature gradient, and also increasing the magnitude of the former by two orders of magnitude. We optimize the electrostatic potential variation to minimize impurity accumulation, resulting in a 20%–50% reduction of the inward impurity flux. Furthermore, we investigate whether the electrostatic potential variation caused by fast particles due to ion-cyclotron resonance heating can be used to reduce the impurity accumulation, but find the effect to be small in the cases considered.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

WE-DE-201-05: Evaluation of a Windowless Extrapolation Chamber Design and Monte Carlo Based Corrections for the Calibration of Ophthalmic Applicators

Purpose: To test the validity of a windowless extrapolation chamber used to measure surface dose rate from planar ophthalmic applicators and to compare different Monte Carlo based codes for deriving correction factors. Methods: Dose rate measurements were performed using a windowless, planar extrapolation chamber with a {sup 90}Sr/{sup 90}Y Tracerlab RA-1 ophthalmic applicator previously calibrated at the National Institute of Standards and Technology (NIST). Capacitance measurements were performed to estimate the initial air gap width between the source face and collecting electrode. Current was measured as a function of air gap, and Bragg-Gray cavity theory was used to calculate the absorbed dose rate to water. To determine correction factors for backscatter, divergence, and attenuation from the Mylar entrance window found in the NIST extrapolation chamber, both EGSnrc Monte Carlo user code and Monte Carlo N-Particle Transport Code (MCNP) were utilized. Simulation results were compared with experimental current readings from the windowless extrapolation chamber as a function of air gap. Additionally, measured dose rate values were compared with the expected result from the NIST source calibration to test the validity of the windowless chamber design. Results: Better agreement was seen between EGSnrc simulated dose results and experimental current readings at very small air gaps (<100 µm) for the windowless extrapolation chamber, while MCNP results demonstrated divergence at these small gap widths. Three separate dose rate measurements were performed with the RA-1 applicator. The average observed difference from the expected result based on the NIST calibration was −1.88% with a statistical standard deviation of 0.39% (k=1). Conclusion: EGSnrc user code will be used during future work to derive correction factors for extrapolation chamber measurements. Additionally, experiment results suggest that an entrance window is not needed in order for an extrapolation chamber to provide accurate dose rate measurements for a planar ophthalmic applicator.

07 ISOTOPE AND RADIATION SOURCES↗

TADSim: Discrete Event-based Performance Prediction for Temperature Accelerated Dynamics

Next-generation high-performance computing will require more scalable and flexible performance prediction tools to evaluate software--hardware co-design choices relevant to scientific applications and hardware architectures. Here, we present a new class of tools called application simulators—parameterized fast-running proxies of large-scale scientific applications using parallel discrete event simulation. Parameterized choices for the algorithmic method and hardware options provide a rich space for design exploration and allow us to quickly find well-performing software--hardware combinations. We demonstrate our approach with a TADSim simulator that models the temperature-accelerated dynamics (TAD) method, an algorithmically complex and parameter-rich member of the accelerated molecular dynamics (AMD) family of molecular dynamics methods. The essence of the TAD application is captured without the computational expense and resource usage of the full code. We accomplish this by identifying the time-intensive elements, quantifying algorithm steps in terms of those elements, abstracting them out, and replacing them by the passage of time. We use TADSim to quickly characterize the runtime performance and algorithmic behavior for the otherwise long-running simulation code. We extend TADSim to model algorithm extensions, such as speculative spawning of the compute-bound stages, and predict performance improvements without having to implement such a method. Validation against the actual TAD code shows close agreement for the evolution of an example physical system, a silver surface. Finally, focused parameter scans have allowed us to study algorithm parameter choices over far more scenarios than would be possible with the actual simulation. This has led to interesting performance-related insights and suggested extensions.

97 MATHEMATICS AND COMPUTING↗