Search NASA⌕ Search

SEARCH · Search NASA

Results for “surface steps”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28

Reduced recombination via tunable surface fields in perovskite thin films

Here, the ability to reduce energy loss at semiconductor surfaces through passivation or surface field engineering is an essential step in the manufacturing of efficient photovoltaic (PV) and optoelectronic devices. Similarly, surface modification of emerging halide perovskites with quasi-two-dimensional (2D) heterostructures is now ubiquitous to achieve PV power conversion efficiencies (PCEs) >25%, yet a fundamental understanding to how these treatments function is still generally lacking. Here we use a unique combination of depth-sensitive nanoscale characterization techniques to uncover a tunable passivation strategy and mechanism found in perovskite PV devices that were the first to reach the >25% PCE milestone. Namely, treatment with hexylammonium bromide leads to the simultaneous formation of an iodide-rich 2D layer along with a Br halide gradient that extends from defective surfaces and grain boundaries into the bulk three-dimensional (3D) layer. This interface can be optimized to extend the charge carrier lifetime to record values >30 μs and to reduce interfacial recombination velocities to values as low as <7 cm s −1 .

Devices for energy harvesting↗

Electrical Detection of Charge-to-spin and Spin-to-Charge Conversion in a Topological Insulator Bi 2 Te 3 Using BN/Al 2 O 3 Hybrid Tunnel Barrier

One of the most striking properties of three-dimensional topological insulators (TIs) is spin-momentum locking, where the spin is locked at right angles to momentum and hence an unpolarized charge current creates a net spin polarization. Alternatively, if a net spin is injected into the TI surface state system, it is distinctively associated with a unique carrier momentum and hence should generate a charge accumulation, as in the so-called inverse Edelstein effect. Here using a Fe/Al 2 O 3 /BN tunnel barrier, we demonstrate both effects in a single device in Bi 2 Te 3 : the electrical detection of the spin accumulation generated by an unpolarized current flowing through the surface states, and that of the charge accumulation generated by spins injected into the surface state system. This work is the first to utilize BN as part of a hybrid tunnel barrier on TI, where we observed a high spin polarization of 93% for the TI surfaces states. The reverse spin-to-charge measurement is an independent confirmation that spin and momentum are locked in the surface states of TI, and offers additional avenues for spin manipulation. It further demonstrates the robustness and versatility of electrical access to the spin system within TI surface states, an important step towards its utilization in TI-based spintronics devices.

36 MATERIALS SCIENCE↗

Evolution of the Surface Science of Catalysis from Single Crystals to Metal Nanoparticles under Pressure

Vacuum studies of metal single crystal surfaces using electron and molecular beam scattering revealed that the surface atoms relocate when the surface is clean (reconstruction) and when it is covered by adsorbates (adsorbate induced restructuring). It was also discovered that atomic steps and other low coordination surface sites are active for breaking chemical bonds (H-H, O=O, C-H, C=O and C-C) with high reaction probability. Investigations at high reactant pressures using sum frequency generation (SFG)--vibrational spectroscopy and high pressure scanning tunneling microscopy (HPSTM) revealed bond breaking at low reaction probability sites on the adsorbate-covered metal surface, and the need for adsorbate mobility for continued turnover. Since most catalysts (heterogeneous, enzyme and homogeneous) are nanoparticles, colloid synthesis methods were developed to produce monodispersed metal nanoparticles in the 1-10 nm range and controlled shapes to use them as new model catalyst systems in two-dimensional thin film form or deposited in mesoporous three-dimensional oxides. Studies of reaction selectivity in multipath reactions (hydrogenation of benzene, cyclohexene and crotonaldehyde) showed that reaction selectivity depends on both nanoparticle size and shape. The oxide-metal nanoparticle interface was found to be an important catalytic site because of the hot electron flow induced by exothermic reactions like carbon monoxide oxidation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ultra-Short Laser Absorption In Solid Targets

With the rapid development and continuously improving technology of subpicosecond laser pulse generation, new interesting physical problems are now investigated. Among them the laser light absorption in solid targets. During the interaction with solid targets, high intensity laser pulses are absorbed by electrons in optical skin depths, leading to rapid ionization before that significant ablation of solid material takes place. The ultra-short laser is absorbed in the overdense plasma through the electron-ion collisions (normal skin effect) or collisionless mechanisms (anomalous skin effect or sheath inverse bremsstrahlung). These two regimes depend on the laser intensity, the plasma temperature and the ionization state Z. In this work we solve numerically the Fokker-Planck equation to compute the electron distribution function in the skin layer. In the second step we compute the surface impedance and we deduce the absorption coefficient.

36 MATERIALS SCIENCE↗

Generating Sub-Micron Features On Rough Surfaces Using Optical Trap Assisted Nanopatterning

Near-field intensity enhancement enables laser modification of materials with feature sizes below the classical diffraction limit. However, the need to maintain close distances between the objective element and the substrate typically limit demonstrations of this technology to flat surfaces, even though there are many cases where the ability to produce sub-micron features on rough or structured surfaces are needed. Here, we show the use of a new technique, optical trap assisted nanopatterning (OTAN), for the production of nanoscale features on rippled substrates. The ability to position a microbead near-field objective close to the surface without the need for active feedback and control allows one to continuously move the bead across a rough surface without sticking. Sub-micron patterning of polyimide is demonstrated on surfaces with 1.1 {mu}m steps showing good uniformity. Finally, the enabling technology allows for straightforward parallelization where multiple patterns can be created simultaneously over surface.

36 MATERIALS SCIENCE↗

Local changes of work function near rough features on Cu surfaces operated under high external electric field

Metal surfaces operated under high electric fields produce sparks even if they are held in ultra high vacuum. In spite of extensive research on the topic of vacuum arcs, the mystery of vacuum arc origin still remains unresolved. The indications that the sparking rates depend on the material motivate the research on surface response to extremely high external electric fields. In this work by means of density-functional theory calculations we analyze the redistribution of electron density on (100) Cu surfaces due to self-adatoms and in presence of high electric fields from −1 V/nm up to −2 V/nm (−1 to −2 GV/m, respectively). We also calculate the partial charge induced by the external field on a single adatom and a cluster of two adatoms in order to obtain reliable information on charge redistribution on surface atoms, which can serve as a benchmarking quantity for the assessment of the electric field effects on metal surfaces by means of molecular dynamics simulations. Furthermore, we investigate the modifications of work function around rough surface features, such as step edges and self-adatoms.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Dramatically enhanced self-assembly of GeSi quantum dots with superior photoluminescence induced by the substrate misorientation

A dramatically enhanced self-assembly of GeSi quantum dots (QDs) is disclosed on slightly miscut Si (001) substrates, leading to extremely dense QDs and even a growth mode transition. The inherent mechanism is addressed in combination of the thermodynamics and the growth kinetics both affected by steps on the vicinal surface. Moreover, temperature-dependent photoluminescence spectra from dense GeSi QDs on the miscut substrate demonstrate a rather strong peak persistent up to 300 K, which is attributed to the well confinement of excitons in the dense GeSi QDs due to the absence of the wetting layer on the miscut substrate.

36 MATERIALS SCIENCE↗

First-principles studies on molecular beam epitaxy growth of GaAs 1-x Bi x

We investigate the molecular beam epitaxy (MBE) growth of GaAs 1-x Bi x film using density functional theory with spin-orbit coupling to understand the growth of this film, especially the mechanisms of Bi incorporation. We study the stable adsorption structures and kinetics of the incident molecules (As₂ molecule, Ga atom, Bi atom, and Bi₂ molecule) on the (2 x 1)-Ga sub ||Bi surface and a proposed q (1 x 1)-Ga sub ||AsAs surface has a quasi-(1 x 1) As layer above the Ga-terminated GaAs substrate and a randomly oriented As dimer layer on top. We obtain the desorption and diffusion barriers of the adsorbed molecules and also the reaction barriers of three key processes related to Bi evolution, namely, Bi incorporation, As/Bi exchange, and Bi clustering. The results help explain the experimentally observed dependence of Bi incorporation on the As/Ga ratio and growth temperature. Furthermore, we find that As₂ exchange with Bi of the (2 x 1)-Ga sub ||Bi surface is a key step controlling the kinetics of the Bi incorporation. Finally, we explore two possible methods to enhance the Bi incorporation, namely, replacing the MBE growth mode from codeposition of all fluxes with a sequential deposition of fluxes and applying asymmetric in-plane strain to the substrate.

Luo, Guangfu↗

Temperature programed desorption of C{sub 2}H{sub 4} from pure and graphite-covered Pt(111)

Ethylene adsorption on Pt(111) at 95 K was studied by temperature programed desorption (TPD), low energy electron diffraction (LEED), and x-ray photoelectron spectroscopy. Ethylene desorbs reversibly at 112 K and irreversibly at 255 and 280 K. It is generally accepted that annealing of ethylene adsorbed on Pt(111) to 300 K results in a dehydrogenation to ethylidyne through an ethylidene intermediate. This was observed by a hydrogen desorption peak at 300 K. Also, hydrogenation of the adsorbed ethylene was observed by a small ethane desorption peak at 300 K. Upon heating to 700 K, the ethylidyne species will further dehydrogenate to carbidic carbon species with hydrogen desorption peaks at 460 and 640 K. If the carbidic species is heated to higher temperatures (up to 1000 K), it will further dehydrogenate and form graphitic islands which will accumulate by Ostwald ripening in larger islands at the step edges of the surface. After annealing the sample to 1000 K, a statistically distributed 8x8 superstructure of these graphite islands is achieved, as interpreted from A pattern in the LEED data. The TPD results indicate that ethylene adsorption on Pt(111) results in the formation of graphitic islands upon heating to 1000 K, contrary to previous conjectures of formation of a full graphite monolayer.

36 MATERIALS SCIENCE↗

Semiconductor–Metal Phase Transition and “Tristable” Electrical Switching in Nanocrystalline Vanadium Oxide Films on Silicon

Temperature dependences of the ac conductivity of nanocrystalline mixed vanadium oxide films on silicon revealed a multistep shape of the hysteresis loop observed during the semiconductor–metal phase transition in VO{sub 2}, which was not manifested in the case of dc measurements. These peculiarities are related to the size effect, heterophase character of vanadium oxide films, and different types of charge carriers in the bulk of nanocrystallites and on their surfaces. The appearance of steps is explained by the phase transition taking place in separate groups of crystallites with close dimensions. The phenomenon of “tristable” electrical switching in these vanadium oxide films was observed for the first time.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A Broad Stability Investigation of Nb-Doped SrCoO 2.5+δ as a Reversible Oxygen Electrode for Intermediate-Temperature Solid Oxide Fuel Cells

The present work reports a systematic study on the structural, thermal, electrical and electrochemical stability of SrCo 1–x Nb x O 2.5+δ series as a potential reversible oxygen-electrode for intermediate-temperature solid oxide fuel cells. The identified best composition is x = 0.10, which exhibits a stable pseudo primitive cubic structure at <700°C and a reversible oxygen redox reaction at 350°C. The conductivity of this material is p-type and also exhibits a peak at 350°C, implying that the electron hole conduction is closely associated with the oxygen nonstoichiometry. Electrochemical impedance spectroscopy analysis indicates a low polarization resistance rate-limited by a slower surface O 2 dissociation step. Altogether, the material is thermally stable and oxygen redox reversible below 700°C, above which a catalytically less active brownmillerite SrCoO 2.5 is formed.

25 ENERGY STORAGE↗

In vivo collection of rare proteins using kinesin-based "nano-harvesters".

In this project, we have developed a novel platform for capturing, transport, and separating target analytes using the work harnessed from biomolecular transport systems. Nanoharvesters were constructed by co-organizing kinesin motor proteins and antibodies on a nanocrystal quantum dot (nQD) scaffold. Attachment of kinesin and antibodies to the nQD was achieved through biotin-streptavidin non-covalent bonds. Assembly of the nanoharvesters was characterized using a modified enzyme-linked immunosorbent assay (ELISA) that confirmed attachment of both proteins. Nanoharvesters selective against tumor necrosis factor-{alpha} (TNF-{alpha}) and nuclear transcription factor-{kappa}B (NF-{kappa}B) were capable of detecting target antigens at <100 ng/mL in ELISAs. A motility-based assay was subsequently developed using an antibody-sandwich approach in which the target antigen (TNF-{alpha}) formed a sandwich with the red-emitting nanoharvester and green-emitting detection nQD. In this format, successful sandwich formation resulted in a yellow emission associated with surface-bound microtubules. Step-wise analysis of sandwich formation suggested that the motility function of the kinesin motors was not adversely affected by either antigen capture or the subsequent binding of the detection nQDs. TNF-{alpha} was detected as low as {approx}1.5 ng/mL TNF-{alpha}, with 5.2% of the nanoharvesters successfully capturing the target analyte and detection nQDs. Overall, these results demonstrate the ability to capture target protein analytes in vitro using the kinesin-based nanoharvesters in nanofluidic environments. This system has direct relevance for lab-on-a-chip applications where pressure-driven or electrokinetic movement of fluids is impractical, and offers potential application for in vivo capture of rare proteins within the cytoplasmic domain of live cells.

59 BASIC BIOLOGICAL SCIENCES↗

JLab SRF Cavity Fabrication Errors, Consequences and Lessons Learned

Today, elliptical superconducting RF (SRF) cavities are preferably made from deep-drawn niobium sheets as pursued at Jefferson Laboratory (JLab). The fabrication of a cavity incorporates various cavity cell machining, trimming and electron beam welding (EBW) steps as well as surface chemistry that add to forming errors creating geometrical deviations of the cavity shape from its design. An analysis of in-house built cavities over the last years revealed significant errors in cavity production. Past fabrication flaws are described and lessons learned applied successfully to the most recent in-house series production of multi-cell cavities.

43 PARTICLE ACCELERATORS↗

Ultrahigh density ferroelectric storage and lithography by high order ferroic switching

A method for switching the direction of polarization in a relatively small domain in a thin-film ferroelectric material whose direction of polarization is oriented normal to the surface of the material involves a step of moving an electrically-chargeable tip into contact with the surface of the ferroelectric material so that the direction of polarization in a region adjacent the tip becomes oriented in a preselected direction relative to the surface of the ferroelectric material. The tip is then pressed against the surface of the ferroelectric material so that the direction of polarization of the ferroelectric material within the area of the ferroelectric material in contact with the tip is reversed under the combined effect of the compressive influence of the tip and electric bias.

Kalinin, Sergei V↗

An atomistic mechanism study of GaN step-flow growth in vicinal m -plane orientations

We present elucidation of homoepitaxial growth mechanisms on vicinal non-polar surfaces of GaN that is highly important for gaining an understanding of and control thin film surface morphology and properties. Using first-principles calculations, we study the step-flow growth in m-plane GaN based on atomic row nucleation and kink propagation kinetics. Ga–N dimer adsorption onto the m-plane is energetically more favorable than that of Ga and N isolated adatoms. Therefore, we have treated the dimers as the dominant growth species attached to the step edges. By calculating the free energies of sequentially attached Ga–N dimers, we have elucidated that the a-step edge kink growth proceeds by parallel attachment rather than by across the step edge approach. We found a series of favorable configurations of kink propagation and calculated the free energy and nucleation barriers for kink evolution on five types of step edges (a, +c, -c, +a + c, and -a - c). By changing the chemical potential μGa and the excess chemical potential Δμ, the growth velocities at the five types of edges are controlled by the corresponding kink pair nucleation barrier E* in their free energy profiles. To explore the kink-flow growth instability observed at different Ga/N flux ratios, calculations of kink pairs on the incompact -c and +c-step edges are further performed to study their formation energies. Variations of these step edge morphologies with a tuned chemical environment are consistent with previous experimental observations, including stable diagonal ±a ± c-direction steps. In conclusion, our work provides a first-principles approach to explore step growth and surface morphology of the vicinal m-plane GaN, which is applicable to analyze and control the step-flow growth of other binary thin films.

36 MATERIALS SCIENCE↗

Reactivity of metal oxides: Thermal and photochemical dissolution of MO and MFe{sub 2}O{sub 4} (M=Ni, Co, Zn)

Dissolution rates of NiO, CoO, ZnO, {alpha}-Fe{sub 2}O{sub 3} and the corresponding ferrites in 0.1 mol dm{sup -3} oxalic acid at pH 3.5 were measured at 70 deg. C. The dissolution of simple oxides proceeds through the formation of surface metal oxalate complexes, followed by the transfer of surface complexes (rate-determining step). At constant pH, oxalate concentration and temperature, the trend in the first-order rate constant for the transfer of the surface complexes (k{sub Me}; Me=Ni, Co, Zn, Fe) parallels that of water exchange in the dissolved metal ions (k{sub -w}). Thus, the most important factor determining the rates of dissolution of metal oxides is the lability of Me-O bonds, which is in turn defined by the electronic structure of the metal ion and its charge/radius ratio. UV (384 nm) irradiation does not increase significantly the dissolution rates of NiO, CoO and ZnO, whereas hematite is highly sensitive to UV light. For ferrites, the reactivity order is ZnFe{sub 2}O{sub 4}>CoFe{sub 2}O{sub 4}>>NiFe{sub 2}O{sub 4}. Dissolution is congruent, with rates intermediate between those of the constituent oxides, Fe{sub 2}O{sub 3} and MO (M=Co, Ni, Zn), reflecting the behavior of very thin leached layers with little Zn and Co, but appreciable amounts of Ni. The more robust Ni{sup 2+} labilizes less the corresponding ferrite. The correlation between log k{sub M} and log k{sub -w} is somewhat blurred and displaced to lower k{sub M} values. Fe(II), either photogenerated or added as salt, enhances the rate of Fe(III) phase transfer. A simple reaction mechanism is used to interpret the data. - Graphical abstract: Linear relationships between k{sub Me} and k{sub -w} are observed. In ferrites, Fe(III) arrests more the reactivity of the more labile ions, thus producing a lower slope.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Biochar Nanocomposite as an Inexpensive and Highly Efficient Carbonaceous Adsorbent for Hexavalent Chromium Removal

Biochar is commonly used for soil amendment, due to its excellent water-holding capacity. The Cr(VI) contamination of water is a current environmental issue in industrial regions. Here, we evaluated the effects of two-step modifications on boosting biochar’s performance in terms of the removal of aqueous hexavalent chromium (Cr(VI)), along with investigating the alterations to its surface properties. The first modification step was heat treatment under air at 300 °C, producing hydrophilic biochar (HBC). The resulting HBC was then impregnated with zero-valent iron nanoparticles (nZVI), creating an HBC/nZVI composite, adding a chemical reduction capability to the physical sorption mechanism. Unmodified biochar (BC), HBC, and HBC/nZVI were characterized for their physicochemical properties, including surface morphology and elemental composition, by SEM/EDS, while functional groups were ascertained by FTIR and surface charge by zeta potential. Cr(VI) removal kinetic studies revealed the four-time greater sorption capacity of HBC than BC. Although unmodified BC showed faster initial Cr(VI) uptake, it rapidly worsened and started desorption. After nZVI impregnation, the Cr(VI) removal rate of HBC increased by a factor of 10. FTIR analysis of biochars after Cr(VI) adsorption showed the presence of Cr(III) oxide only on the used HBC/nZVI and demonstrated that the carbonyl and carboxyl groups were the main groups involved in Cr(VI) sorption. Modified biochars could be considered an economical substitute for conventional methods.

36 MATERIALS SCIENCE↗

Roughness Reduction of Additively Manufactured Steel by Electropolishing

Improving surface finishing is the critical step in the application of an additively manufactured (AM) component in high fatigue and corrosion-sensitive fields. This paper provides insights into surface properties of electropolished AM component made up of 316 stainless steel with > 6% carbon. We performed surface analysis with profilometer, scanning electron microscope, and AFM to investigate the electropolished and unpolished AM components. The first major discovery of the present work is that our optical profilometry study provided an estimate of the amount of material to be removed to achieve a shiny and smooth surface on 316 stainless steel AM part. One needs to remove more than 200 μm thick layer from the surface to make a mirror-smooth surface. Such estimation can enable researchers to incorporate requisite tolerance during the design stage itself. The second important finding of our work is that ultrasmooth microstructure on the AM surface appeared when preferential material removal occurred along the boundary of the hexagonal microscopic features. Additionally, our optical profilometry studies provided an analysis of several roughness parameters on the electropolished surface. Electropolishing was effective in reducing the surface roughness below ~ 0.1 μm RMS over microscopic regions. Observation of sub-μm RMS roughness was consistently observed with the optical profilometer, SEM, and AFM. SEM study revealed a significant change in the microstructure of the electropolished samples in a medium and highly smooth state. Here, we also conducted a water contact angle study and spectroscopic reflectance study on electropolished and unpolished AM component surfaces. Our study revealed that electropolishing is a highly promising route for improving the surface finishing of AM components.

36 MATERIALS SCIENCE↗