Search NASA⌕ Search

SEARCH · Search NASA

Results for “test method”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Improving cellulose attribution by selectively removing yeast glucans from grain fermentation intermediates

Abstract This article presents an industry-relevant method for quantifying cellulose in mixed substrate samples. We built upon the cellulosic glucan measurement proposed by Sluiter et al. (2021) to investigate significant cellulose loss under cold caustic conditions, which has hindered the establishment of an industrially relevant method. To overcome this issue, we used dimethyl sulfoxide (DMSO) as an alternative solvent, which avoids mercerization reactions (Budtova and Navard 2015) but may leave some resistant starch in the sample. Treatment via an enzyme mixture removed starch and conformed to US Environmental Protection Agency (EPA) guidance on cellulose measurement by establishing quantitative de-starching via nuclear magnetic resonance (EPA 2022). The selective removal of yeast beta-glucan was accomplished using a commercially available Zymolyase. Our results demonstrated excellent reproducibility, with coefficients of variance of 7.14% or less, when measuring cellulose in low cellulose content samples. The method was tested on relevant lab and plant samples, showing an average 0.9% ethanol derived from the conversion of cellulose when cellulase was added to the process and zero response when no cellulase was added. These findings indicate that a cellulose method using DMSO and pullulanase provides a complete and accurate view of cellulose content, composition, and conversion in industrial fermentation processes.

Sluiter, Justin [National Renewable Energy Laborat↗
DOE OSTI2022

Tests Of The Extended Range SRF Cavity Tuners For The LCLS-II-HE Project*

The LCLS-II HE superconducting linac can produce multi-energy beams by supporting multiple undulator lines simultaneously. This could be achieved by using the cavity SRF tuner in the off-frequency detune mode. This off-frequency operation method was tested in the verification cryomodule (vCM) and CM 1 at Fermilab at 2 K. In both cases, the tuners achieved a frequency shift of -565$\pm$80 kHz. This study will discuss cavity frequency during each step as it is being assembled in the cryomodule string and finally when it is being tested at 2 K. Tracking the cavity frequency helped enable the tuners to reach this large frequency shift. The specific procedures of tuner setting during assembly will be presented.

43 PARTICLE ACCELERATORS↗
DOE OSTI2024

Evaluation of partial volume correction and analysis of longitudinal [ 18 F]GTP1 tau PET imaging in Alzheimer's disease using linear mixed-effects models

Purpose: We evaluated the impact of partial volume correction (PVC) methods on the quantification of longitudinal [ 18 F]GTP1 tau positron-emission tomography (PET) in Alzheimer's disease and the suitability of describing the tau pathology burden temporal trajectories using linear mixed-effects models (LMEM). Methods: We applied van Cittert iterative deconvolution (VC), 2-compartment, and 3-compartment, and the geometric transfer matrix plus region-based voxelwise methods to data acquired in an Alzheimer's disease natural history study over 18 months at a single imaging site. We determined the optimal PVC method by comparing the standardized uptake value ratio change (%ΔSUVR) between diagnostic and tau burden–level groups and the longitudinal repeatability derived from the LMEM. The performance of LMEM analysis for calculating %ΔSUVR was evaluated in a natural history study and in a multisite clinical trial of semorinemab in prodromal to mild Alzheimer's disease by comparing results to traditional per-visit estimates. Results: The VC, 2-compartment, and 3-compartment PVC methods had similar performance, whereas region-based voxelwise overcorrected regions with a higher tau burden. The lowest within-subject variability and acceptable group separation scores were observed without PVC. The LMEM-derived %ΔSUVR values were similar to the per-visit estimates with lower variability. Conclusion: The results indicate that the tested PVC methods do not offer a clear advantage or improvement over non-PVC images for the quantification of longitudinal [ 18 F]GTP1 PET data. LMEM offers a robust framework for the longitudinal tau PET quantification with low longitudinal test–retest variability. Clinical trial registration: NCT02640092 and NCT03289143.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2025

Angular-spatial hp -adaptivity for radiative transfer with discontinuous Galerkin spectral element methods

Radiative transfer is important for many science and engineering applications, and numerical simulations of radiative transfer can be challenging. For instance, the radiation field is seven-dimensional – three spatial, two angular, one wavelength, and one temporal – and often features steep gradients. Therefore, memory usage is a key issue. To reduce memory, some past work has investigated the use of adaptive mesh refinement (AMR), typically for either the spatial or angular coordinate, and typically for only h -adaptivity. Here, we propose the use of AMR for the spatial and angular coordinates together, and the use of h - and p -adaptivity together as hp -AMR for the potential for further memory savings. We implemented the proposed method for several test cases in two spatial and one angular dimension, with the discontinuous Galerkin spectral element method. These test cases featured highly anisotropic angular radiation, with or without steep spatial gradients. Our primary findings from these test cases were: (1) Angular hp -adaptivity can deliver the radiation solution with the same accuracy as, and with much less computational memory than, uniform angular h - or p -refinements, or angular h -adaptivity alone. This is most obvious when the incoming radiation is highly anisotropic, in which case the savings can be orders of magnitude. (2) Full spatial-angular hp -adaptivity is more efficient in solution representation, compared to solely spatial or solely angular -adaptivity. This is most evident when steep gradients are present in both the spatial and angular distribution. These results suggest that adaptive spatial- hp angular-refinement may perform well in large-scale seven-dimensional applications.

Adaptive refinement↗
DOE OSTI2020

Round Robin Summary for ASTM Method C1733

This report was prepared to summarize the results of an inter- and intra-laboratory round robin of ASTM Method C1733-17 (now C1733-20a) Distribution Coefficients of Inorganic Species by the Batch Method. The testing used the sorption of cesium (Cs) to a standard reference soil from the San Joaquin Valley (Standard Reference Material 2709a). The data collected from the nine participants was used for a statistical analysis to assess the precision of the method and generate a precision and bias statement to update the C1733-20a standard.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2021

Modeling Turbulence in Galactic Centers

Turbulence is a prevalent phenomenon in the interstellar medium, and in particular, the environment at the centers of galaxies. For example, detailed observations of the Milky Way’s Central Molecular Zone (CMZ) revealed that it has a complex and turbulent structure. Turbulence on galactic scales is often modeled using star formation and feedback. However, these effects do not appear to be sufficient for explaining the high-velocity dispersion observed in the CMZ, indicating that additional gas-stirring processes are likely to be operating. Here we introduce a proof-of-concept method to drive turbulence in gas that orbits under the influence of a galactic potential. Instead of relying on a particular physical mechanism, we have adopted a Fourier forcing module and have applied it using a smoothed particle hydrodynamics code. To test our method, we performed simulations of a simplistic model of the CMZ. Our turbulence injection method is capable of balancing the self-gravity of the gas, which allows us to run the simulations for long timescales and thereby follow the evolution of the CMZ. Our results show that turbulence induces a flocculent spiral pattern in our model, analogous to that found in galactic-scale simulations. Furthermore, we find that our turbulence injection method induces inward migration of gas, a result consistent with previous numerical simulations. We submit that this injection method is a promising new tool to simulate turbulence in galactic centers.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

Budget Constrained Machine Learning for Early Prediction of Adverse Outcomes for COVID-19 Patients

Background: Machine learning (ML) based risk stratification models of Electronic Health records (EHR) data may help to optimize treatment of COVID-19 patients, but are often limited by their lack of clinical interpretability and cost of laboratory tests. We develop a ML based tool for predicting adverse outcomes based on EHR data to optimize clinical utility under a given cost structure. This cohort study was performed using deidentified EHR data from COVID-19 patients from ProMedica Healthcare in northwest Ohio and southeastern Michigan. Methods: We tested performance of various ML approaches for predicting either increasing ventilatory support or mortality and the set of model features under a budget constraint was optimized via exhaustive search across all combinations of features. Results: The optimal sets of features for predicting ventilation under any budget constraint included demographics and comorbidities (DCM), basic metabolic panel (BMP), D-dimer, lactate dehydrogenase (LDH), erythrocyte sedimentation rate (ESR), CRP, brain natriuretic peptide (BNP), and procalcitonin and for mortality included DCM, BMP, complete blood count, D-dimer, LDH, CRP, BNP, procalcitonin and ferritin. Conclusions: This study presents a quick, accurate and cost-effective method to evaluate risk of deterioration for patients with SARS-CoV-2 infection at the time of clinical evaluation.

Cadena Pico, JoseE.↗
DOE OSTI2023

Hierarchical reconstruction of 3D well-connected porous media from 2D exemplars using statistics-informed neural network

The relationships between porous microstructures and transport properties are of fundamental importance in various scientific and engineering applications. Due to the intricacy, stochasticity and heterogeneity of porous media, reliable characterization and modeling of transport properties often require a complete dataset of internal microstructure samples. However, it is often an unbearable cost to acquire sufficient 3D digital microstructures by purely using microscopic imaging systems. Herein this paper presents a machine learning-based technique to hierarchically reconstruct 3D well-connected porous microstructures from one isotropic or several anisotropic low-cost 2D exemplar(s). To compactly characterize the large-scale microstructural features, a Gaussian image pyramid is built for each 2D exemplar. Local morphology patterns are collected from the Gaussian image pyramids, and then they serve as the training data to embed the 2D morphological statistics into feed-forward neural networks at multiple length levels. By using a specially-developed morphology integration scheme, the 3D morphological statistics at different levels can be inferred from the statistics-informed neural networks. Gibbs sampling is adopted to hierarchically reconstruct 3D microstructures by using multi-level 3D morphological statistics, where the large-scale, regional and local morphological patterns are statistically generated and successively added to the same 3D random field. The proposed method is tested on a series of porous media with distinct morphologies, and the statistical equivalence between the reconstructed and the real microstructures is systematically evaluated by comparing morphological descriptors and transport properties. The results demonstrate that the proposed 2D-to-3D microstructure reconstruction method is a universal and efficient approach to generating morphologically and physically realistic samples of porous media.

42 ENGINEERING↗
DOE OSTI2020

Multidimensional Tests of a Finite-Volume Solver for MHD With a Real-Gas Equation of State

This work considers two algorithms of a finite-volume solver for the MHD equations with a real-gas equation of state (EOS). Both algorithms use a multistate form of Harten-Lax-Van Leer approximate Riemann solver as formulated for MHD discontinuities. This solver is modified to use the generalized sound speed from the real-gas EOS. Two methods are tested: EOS evaluation at cell centers and at flux interfaces where the former is more computationally efficient. A battery of 1D and 2D tests are employed: convergence of 1D and 2D linearized waves, shock tube Riemann problems, a 2D nonlinear circularly polarized Alfvén wave, and a 2D magneto-Rayleigh-Taylor instability test. The cell-centered EOS evaluation algorithm produces unresolvable thermodynamic inconsistencies in the intermediate states leading to spurious solutions while the flux-interface EOS evaluation algorithm robustly produces the correct solution. The linearized wave tests show this inconsistency is associated with the magnetosonic waves and the magneto-Rayleigh-Taylor instability test demonstrates simulation findings where the spurious solution leads to an unphysical simulation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Radionuclide surrogate aerosolization, resuspension and suppression in hazardous situations

Radioactive fire following nuclear accidents causes resuspension of radioactive contamination that can spread over large areas. Although many papers focus on particle deposition and resuspension, a limited number of studies model its suppression. Even less data is available for the comparison of emissions across particle size, surface, and mode of resuspension. In this study, cerium dioxide surrogate for internal hazards such as radionuclide particle matter was aerosolized into a large chamber and subsequently resuspended after sedimentation. Resuspension was induced by common modes of human movement including walking, wind, and driving on common surfaces including polyvinyl chloride (PVC), artificial grass (turf), and concrete in a 5.8 m long, 3.7 m wide and 3 m high tent. The resuspension was experimentally measured for two particle sizes (1 and 10 μm) at three different heights (0.3 m, 1.2 m, and 2.4 m) and compared across size, surface, and mode of resuspension. Particle size distribution was measured using an aerodynamic particle sizer and the resuspended particles were collected with the wetted wall cyclone aerosol collector and quantitated using inductively coupled plasma mass spectrometry. The testing was repeated with the F-500 fire retardant application to study its effect on resuspension. In this study, artificial grass flooring was found to generate the most resuspension, with walking on turf for the 1 μm particle testing yielding the highest factor overall. Concrete had the lowest resuspension, showing variations in the size distribution of aerosol as a function of height from the source resuspension factors. The application of fire retardant was found to significantly reduce surrogate resuspension, regardless of resuspension method or testing surface. Here, the results provide impactful information regarding the different modes of resuspension including human transport (walking and driving) and wind for the resuspension of radionuclide surrogate particles deposited onto common surfaces and the effect of fire retardant application on their resuspension, leading to higher levels of safety for nuclear energy plants and facilities.

42 ENGINEERING↗
DOE OSTI2022

Pressure Drop in Seven-Pin Wire-Wrapped Rod Bundle for the Sodium Cartridge Loop in Versatile Test Reactor

This work studies the hydrodynamics of the seven pin wire-wrapped rod bundle in the sodium cartridge loop for the Versatile Test Reactor (VTR) through scaled water experiments and computational fluid dynamics (CFD) simulations. Here, the scaling analysis is first performed to demonstrate the hydrodynamic similarity between water and sodium flows at the same Reynolds number Re. A separate-effects test facility is designed and constructed based on the scaling analysis. Detailed experimental data on the pressure drop covering a wide range of Re values (1165 to 27 689) are obtained, which are used to evaluate existing correlations for friction factor and to benchmark CFD simulations. The experimentally determined friction factors f Exp agree well with the Upgraded Cheng and Todreas Detailed Correlation and Pacio-Chen-Todreas Detailed Model within ±7% but are significantly underpredicted by Rehme's correlation by 25%. Various CFD near-wall treatment methods are tested using ANSYS Fluent and evaluated by experimental data. It is found that when the recommended wall y + values are met, most of the near-wall treatment methods can give accurate friction factor predictions. The resolved near-wall method (y + ~ 1) with the Shear Stress Transport k - ω turbulence model and the scalable wall functions (y + > 12) with the realizable k - ε turbulence model can predict f Exp within ±5% The standard wall functions (y + > 30) and nonequilibrium wall functions (y + > 30) with the realizable k - ε model can predict f Exp within ±10%.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2024

Error mitigation, optimization, and extrapolation on a trapped-ion testbed

Current noisy intermediate-scale quantum (NISQ) trapped-ion devices are subject to errors which can significantly impact the accuracy of calculations if left unchecked. A form of error mitigation called zero noise extrapolation (ZNE) can decrease an algorithm’s sensitivity to these errors without increasing the number of required qubits. Here we explore different methods for integrating this error mitigation technique into the Variational Quantum Eigensolver (VQE) algorithm for calculating the ground state of the HeH + molecule at 0.8 Å in the presence of experimental noise. Using the Quantum Scientific Computing Open User Testbed (QSCOUT) trapped-ion device, we test three methods of scaling noise for extrapolation: time stretching the two-qubit gates, scaling the sideband detuning parameter, and inserting two-qubit gate identity operations into the ansatz circuit. We find that time stretching and sideband detuning scaling fail to scale the noise on our particular hardware in a way that can be extrapolated to zero noise. Scaling our noise with global gate identity insertions and extrapolating after variational optimization, we achieve error suppression of 96.8%, resulting in an energy estimate within –0.004 ± 0.04 hartree of the ground state energy. This is an improvement, but still outside the chemical accuracy threshold of 0.0016 hartree. Furthermore, our results show that the efficacy of this error mitigation technique depends on choosing the correct implementation for a given device architecture.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2024

Comparative Analyses of Bioequivalence Assessment Methods for In Vitro Permeation Test Data

ABSTRACT For topical, dermatological drug products, an in vitro option to determine bioequivalence (BE) between test and reference products is recommended. In particular, in vitro permeation test (IVPT) data analysis uses a reference‐scaled approach for two primary endpoints, cumulative penetration amount (AMT) and maximum flux ( J max ), which takes the within donor variability into consideration. In 2022, the Food and Drug Administration (FDA) published a draft IVPT guidance that includes statistical analysis methods for both balanced and unbalanced cases of IVPT study data. This work presents a comprehensive evaluation of various methodologies used to estimate critical parameters essential in assessing BE. Specifically, we investigate the performance of the FDA draft IVPT guidance approach alongside alternative empirical and model‐based methods utilizing mixed‐effects models. Our analyses include both simulated scenarios and real‐world studies. In simulated scenarios, empirical formulas consistently demonstrate robustness in approximating the true model, particularly in effectively addressing treatment–donor interactions. Conversely, the effectiveness of model‐based approaches heavily relies on precise model selection, which significantly influences their results. The research emphasizes the importance of accurate model selection in model‐based BE assessment methodologies. It sheds light on the advantages of empirical formulas, highlighting their reliability compared to model‐based approaches and offers valuable implications for BE assessments. Our findings underscore the significance of robust methodologies and provide essential insights to advance their understanding and application in the assessment of BE, employed in IVPT data analysis.

Leon, Sami↗
DOE OSTI2022

Assessing mass balance-based inverse modeling methods via a pseudo-observation test to constrain NO x emissions over South Korea

This study constrains NO x emissions by utilizing mass balance–based inverse modeling methods and examines the optimization of inverse modeling conditions through a pseudo-observation test for South Korea, which has complex topography. Here, we applied mass balance–based inverse modeling methods such as Basic Mass Balance (BMB), Finite Difference Mass Balance (FDMB), and Iterative Finite Difference Mass Balance (IFDMB). We performed a numerical simulation of air quality using the Community Multi-scale Air Quality (CMAQ) model to calculate the NO 2 column density required for the inverse modeling. The pseudo-observation test was performed according to season, modeling resolution, and regridding methodology of satellite observation data to identify various conditions while applying the inverse modeling for South Korea. Comparing the inverse modeling results from the BMB, FDMB, and IFDMB methods, IFDMB was the most effective method in constraining NO x emissions in the South Korean region since it minimized smearing effects (i.e., transport-induced errors) through iterative calculations. The accuracy of the constrained NO x emissions using mass balance–based inversions in South Korea was the highest in the summer due to the minimized smearing effects, and the 9 km resolution modeling was the most efficient for inverse modeling of the region. In addition, the results of inverse modeling varied depending on the regridding methods, implying the importance of using a suitable regridding method and modeling resolution. This study used pseudo-observations, but the inversions are expected to be applied based on actual satellite data in the future.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

The Solid Electrolyte Interphase Dispersion Can Predict Cycle and Calendar Lifetimes in Silicon Anodes for Lithium-Ion Batteries

The solid electrolyte interphase (SEI) plays a critical role in lithium-ion battery (LIB) anodes. It is responsible for passivating the reactive surface of lithiated anodes against degradation of the electrolyte which enables long cycle and calendar lifetimes for LIBs. This role is especially important in high energy density anodes like silicon, that undergo massive volumetric changes during electrochemical cycling. The mechanism by which the SEI performs this role, however, is not clear which makes designing an SEI to passivate silicon anodes impossible. Through decades of research, dozens of chemical species have been identified within the SEI ranging from inorganic solids to polymeric coatings all of which simultaneously exist in a 'mosaic' composition at the anode surface. This mosaic creates a highly dispersive environment in which electrostatic screening of the anode surface from the electrolyte is not always complete. Here, we present an electrochemical technique to directly test the dispersion at the anode surface. We use this technique to screen more than 20 different electrolytes against silicon anodes and find correlations between both the cycle life and calendar life. The insights from this study offer a new framework to think about the SEI and a rapid screening method to test novel electrode/electrolyte combinations.

battery↗
DOE OSTI2021

Evaluating Space Object Conjunction Probabilities Using Characteristic Function Inversion

This report discusses an approach to computing the probability of a conjunction between two space objects in the short-term encounter scenario. A conjunction is defined here as an event where the miss distance between the objects is less than some specified value. The scenario assumptions are that the motion of the objects is linear, their positions are Gaussian distributed, and their velocities are known and constant. Under these assumptions, the squared-miss distance is shown to have the generalized chi-square distribution. An established statistical technique called characteristic function inversion is employed to evaluate the distribution and obtain conjunction probabilities. The method is closely related to a recent approach based on moment generating function inversion, and a qualitative comparison of the approaches is provided. Last, the method is tested on several benchmark test cases where it agrees with numerical integration on the cases with conjunction probabilities above 10 –12 . However, the exact probability in these cases is usually not needed and this probability can be bounded above using an independent Gaussian approximation. Overall, the report shows how to compute conjunction probabilities using a standard statistical method, though numerical integration seems to perform equally well.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2020

Approximate inverse-based block preconditioners in poroelasticity

We focus on the fully implicit solution of the linear systems arising from a three-field mixed finite element approximation of Biot’s poroleasticity equations. The objective is to develop algebraic block preconditioners for the efficient solution of such systems by Krylov subspace methods. In this work, we investigate the use of approximate inverse-based techniques to decouple the native system of equations and obtain explicit sparse approximations of the Schur complements related to the physics-based partitioning of the unknowns by field type. Here, the proposed methods are tested in various numerical experiments including real-world applications dealing with petroleum and geotechnical engineering.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Realistic galaxy image simulation via score-based generative models

ABSTRACT We show that a denoising diffusion probabilistic model (DDPM), a class of score-based generative model, can be used to produce realistic mock images that mimic observations of galaxies. Our method is tested with Dark Energy Spectroscopic Instrument (DESI) grz imaging of galaxies from the Photometry and Rotation curve OBservations from Extragalactic Surveys (PROBES) sample and galaxies selected from the Sloan Digital Sky Survey. Subjectively, the generated galaxies are highly realistic when compared with samples from the real data set. We quantify the similarity by borrowing from the deep generative learning literature, using the ‘Fréchet inception distance’ to test for subjective and morphological similarity. We also introduce the ‘synthetic galaxy distance’ metric to compare the emergent physical properties (such as total magnitude, colour, and half-light radius) of a ground truth parent and synthesized child data set. We argue that the DDPM approach produces sharper and more realistic images than other generative methods such as adversarial networks (with the downside of more costly inference), and could be used to produce large samples of synthetic observations tailored to a specific imaging survey. We demonstrate two potential uses of the DDPM: (1) accurate inpainting of occluded data, such as satellite trails, and (2) domain transfer, where new input images can be processed to mimic the properties of the DDPM training set. Here we ‘DESI-fy’ cartoon images as a proof of concept for domain transfer. Finally, we suggest potential applications for score-based approaches that could motivate further research on this topic within the astronomical community.

79 ASTRONOMY AND ASTROPHYSICS↗