Search NASA⌕ Search

SEARCH · Search NASA

Results for “three dimensional”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28

Epitaxial Growth of Three-Dimensionally Mesostructured Single-Crystalline Cu 2 O via Templated Electrodeposition

Significant efforts have been made over the past few decades to realize functional three-dimensional photonic crystal devices including zero-threshold lasers, waveguides, light-emitting diodes (LEDs), and solar cells; however, progress has been limited because of difficulties in creating three-dimensional photonic crystals from single-crystal materials. Most have been formed from polycrystalline materials and thus have generally exhibited poor electronic properties. Realization of materials containing complex three-dimensional mesostructures, in single-crystal form, remains a significant challenge. Furthermore, we demonstrate the epitaxial growth of three-dimensionally mesostructured Cu 2 O by bottom-up electrodeposition through a 3D silica colloidal template. Not only is the templated Cu 2 O single crystal, but when the electrodeposition continues past the colloidal template, the crystallinity of the overlying solid Cu 2 O appears to be improved because the template blocks threading dislocations, resulting in substantial reductions in the dislocation density of the overlying solid Cu 2 O.

36 MATERIALS SCIENCE↗

Three-Dimensional FIB/EBSD Characterization of Irradiated HfAl3-Al Composite

A thermal neutron absorbing material, comprised of 28.4 vol% HfAl3 in an Al matrix, was developed to serve as a conductively cooled thermal neutron filter to enable fast flux materials and fuels testing in a pressurized water reactor. In order to observe the microstructural change of the HfAl3-Al composite due to neutron irradiation, an EBSD-FIB characterization approach is developed and presented in this paper. Using the focused ion beam (FIB), the sample was fabricated to 25µm × 25µm × 20 µm and mounted on the grid. A series of operations were carried out repetitively on the sample top surface to prepare it for scanning electron microscopy (SEM). First, a ~100-nm layer was removed by high voltage FIB milling. Then, several cleaning passes were performed on the newly exposed surface using low voltage FIB milling to improve the SEM image quality. Last, the surface was scanned by Electron Backscattering Diffraction (EBSD) to obtain the two-dimensional image. After 50 to 100 two-dimensional images were collected, the images were stacked to reconstruct a three-dimensional model using DREAM.3D software. Two such reconstructed three-dimensional models were obtained from samples of the original and post-irradiation HfAl3-Al composite respectively, from which the most significant microstructural change caused by neutron irradiation apparently is the size reduction of both HfAl3 and Al grains. The possible reason is the thermal expansion and related thermal strain from the thermal neutron absorption. This technique can be applied to three-dimensional microstructure characterization of irradiated materials.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

THE THREE-DIMENSIONAL STRUCTURE OF AN ACTIVE REGION FILAMENT AS EXTRAPOLATED FROM PHOTOSPHERIC AND CHROMOSPHERIC OBSERVATIONS

The three-dimensional structure of an active region filament is studied using nonlinear force-free field extrapolations based on simultaneous observations at a photospheric and a chromospheric height. To that end, we used the Si I 10827 A line and the He I 10830 A triplet obtained with the Tenerife Infrared Polarimeter at the Vacuum Tower Telescope (Tenerife). The two extrapolations have been carried out independently from each other and their respective spatial domains overlap in a considerable height range. This opens up new possibilities for diagnostics in addition to the usual ones obtained through a single extrapolation from, typically, a photospheric layer. Among those possibilities, this method allows the determination of an average formation height of the He I 10830 A signal of Almost-Equal-To 2 Mm above the surface of the Sun. It allows, as well, a cross-check of the obtained three-dimensional magnetic structures to verify a possible deviation from the force-free condition, especially at the photosphere. The extrapolations yield a filament formed by a twisted flux rope whose axis is located at about 1.4 Mm above the solar surface. The twisted field lines make slightly more than one turn along the filament within our field of view, which results in 0.055 turns Mm{sup -1}. The convex part of the field lines (as seen from the solar surface) constitutes dips where the plasma can naturally be supported. The obtained three-dimensional magnetic structure of the filament depends on the choice of the observed horizontal magnetic field as determined from the 180 Degree-Sign solution of the azimuth. We derive a method to check for the correctness of the selected 180 Degree-Sign ambiguity solution.

79 ASTRONOMY AND ASTROPHYSICS↗

Near-wall similarity in the three-dimensional turbulent boundary layers. III - Shear-driven flow results

Ten of eleven proposed three-dimensional similarity models identified in the literature are evaluated with direct wall shear, velocity field, and pressure gradient data from a three-dimensional shear-driven boundary layer flow. Results define an upper limit on velocity vector skewing for each model's predictive ability. When combined with earlier results for pressure-driven flows, each model's predictive ability with and without pressure gradients is summarized. The utility of some two-dimensional type indirect wall shear measurement methods and wall shear inference methods from near-wall velocity measurements for three-dimensional flows is also discussed.

Pierce, F. J.↗

Numerical simulation of interacting, three-dimensional vortex filaments

Unsteady three-dimensional fluid flows which are characterized by low viscosity and the presence of distinct regions of high vorticity embedded in an otherwise irrotational flow are considered, taking into account the case in which an intermingling of vortex filaments appears. Incompressible flows of the considered type are simulated with the aid of an approach in which the vorticity distribution is modeled in terms of continuous closed filaments. It is attempted to track these filaments in a Lagrangian reference frame.

Leonard, A.↗

Relationships between the curvatures of tooth surfaces in three-dimensional gear systems

A three-dimensional gear system between crossing and intersecting axes is considered under the assumption that the first derivative of the transmission ratio is zero in the vicinity of the point of contact. The following are obtained; (1) an equation that relates the normal curvatures of the tooth surfaces in the section that passes through the vector of relative velocity; (2) a relation between the principal curvatures and principal directions of the two tooth surfaces; and (3) new formulas for determining the reduced curvatures of the surfaces.

Litvin, F. L.↗

Three-dimensional galaxy simulations

A three-dimensional fully self-consistent computer model was used to determine the evolution of galaxies consisting of 100,000 simulation stars with exponential radial density variation. Comparison with two-dimensional (infinitesimally thin disk) simulations showed only a very slight stabilizing effect due to the additional degree of freedom. The addition of a fully self-consistent, nonrotating, exponential core/halo component resulted in considerable stabilization. The most pronounced instabilities present were those due to the Jeans' instability in the outer regions of the disk, while at the same time a relatively slowly-growing bar instability appeared. The two-dimensional disk, plus core/halo simulation, showed the usual fast-growing instability leading to bar formation.

Hohl, F.↗

Magnetopause characteristics inferred from three-dimensional energetic particle distributions

Three-dimensional distributions for 24- to 44.5 KeV protons (ions) are presented from the ISEE 1 medium-energy particles instrument during a magnetopause traversal at about 0145:00 hours UT on November 20, 1977. The use of these data and simple particle orbit geometry makes it possible to infer magnetopause boundary location, orientation, and velocity. The results are consistent with both overall boundary motions toward and away from the earth at velocities of 10-20 km/s and the presence of a surface wave on the boundary. For the case analyzed, the boundary appears stable and well defined, being capable of supporting trapped type distributions (conservation of the first and second adiabatic invariants) within a fraction of a gyroradius from the magnetosheath field where no trapping is observed.

Williams, D. J.↗

Numerical simulation of supersonic inlets using a three-dimensional viscous flow analysis

A three dimensional fully viscous computer analysis was evaluated to determine its usefulness in the design of supersonic inlets. This procedure takes advantage of physical approximations to limit the high computer time and storage associated with complete Navier-Stokes solutions. Computed results are presented for a Mach 3.0 supersonic inlet with bleed and a Mach 7.4 hypersonic inlet. Good agreement was obtained between theory and data for both inlets. Results of a mesh sensitivity study are also shown.

Anderson, B. H.↗

The structure, energetics and evolution of the dominant frequency-dependent three-dimensional atmospheric modes

The three-dimensional structure of the dominant modes of wintertime variability are examined, and the mode structures are determined by an EOF analysis of the coupled vertical mean and shear streamfunction fields for a wide range of time-scale classes. The time mean energy conversions are determined from a two-layer quasigeostrophic model. Lag-cross correlations between the dominant low-frequency modes tend to be small and/or symmetric about zero, the high frequency modes are found to show highly asymmetric sinusoidal cross correlation functions similar to traveling waves, and some intermediate and short-time scale modes exhibit correlations indicating an association with the decaying phases of blocking in the Pacific. It is suggested that the mean flow barotropic (baroclinic) instabilities are an important source of variance for some of the lowest (highest) fluctuations considered.

Schubert, S. D.↗

A study of the response of deep tropical clouds to mesoscale processes - Three-dimensional numerical experiments

A three-dimensional numerical cloud model is utilized to study the collective feedback effects of cloud systems on the large-scale environment. The characteristic features of the cloud ensemble model are described. The model is applied to a case of a well-defined ITCZ rainband over the eastern tropical Atlantic ocean. The location, number, and configuration of the clouds that formed in the model during the simulations are examined. The cloud heating and moistening, environmental wind shear, and vertical transports of momentum are analyzed. The collective feedbacks of cloud systems on the large-scale temperature, moisture, and horizontal momentum fields are computed after each simulation. The effect of the pressure gradient force on the v-momentum flux is investigated. It is observed that there is good correlation between the model simulations and the observed data.

Tao, Wei-Kuo↗

Numerical simulation of three dimensional transonic flows

The three-dimensional flow over a projectile has been computed using an implicit, approximately factored, partially flux-split algorithm. A simple composite grid scheme has been developed in which a single grid is partitioned into a series of smaller grids for applications which require an external large memory device such as the SSD of the CRAY X-MP/48, or multitasking. The accuracy and stability of the composite grid scheme has been tested by numerically simulating the flow over an ellipsoid at angle of attack and comparing the solution with a single grid solution. The flowfield over a projectile at M = 0.96 and 4 deg angle-of-attack has been computed using a fine grid, and compared with experiment.

Sahu, Jubaraj↗

Consistent boundary conditions for reduced Navier-Stokes (RNS) scheme applied to three-dimensional internal viscous flows

Three-dimensional internal viscous flow problems are presently addressed by a consistent and efficient set of boundary conditions for the multisweep space-marching, pressure-elliptic Reduced Navier-Stokes scheme. Since continuity is by this means directly satisfied at all points in the flow domain, the first-order momentum equations are directly solvable for pressure without the requirement for a Poisson pressure-correction equation. Incompressible flow solutions are obtained for straight and curved ducts of square cross section, in order to validate the procedure. Usefulness is demonstrated for internal flows with strong interactions, as would be found in turbomachine geometries.

Reddy, D. R.↗

Numerical simulation of three-dimensional transonic flows

The three-dimensional flow over a projectile has been computed using an implicit, approximately factored, partially flux-split algorithm. A simple composite grid scheme has been developed in which a single grid is partitioned into a series of smaller grids for applications which require an external large memory device such as the SSD of the CRAY X-MP/48 or multi-tasking. The accuracy and stability of the composite grid scheme have been tested by numerically simulating the flow over an ellipsoid at an angle of attack and comparing the solution with a single-grid solution. The flow field over a projectile at M = 0.96 and 1.1, and 4-deg angle of attack has been computed using a fine grid and compared with experiment.

Sahu, Jubaraj↗

Wintertime nitric acid chemistry - Implications from three-dimensional model calculations

A three-dimensional simulation of the evolution of HNO3 has been run for the winter of 1979. Winds and temperatures are taken from a stratospheric data assimilation analysis, and the chemistry is based on Limb Infrared Monitor of the Stratosphere (LIMS) observations. The model is compared to LIMS observations to investigate the problem of 'missing' nitric acid chemistry in the winter hemisphere. Both the model and observations support the contention that a nitric acid source is needed outside of the polar vortex and north of the subtropics. Observations suggest that HNO3 is not dynamically controlled in middle latitudes. The model shows that given the time scales of conventional chemistry, dynamical control is expected. Therefore, an error exists in the conventional chemistry or additional processes are needed to bring the model and data into agreement. Since the polar vortex is dynamically isolated from the middle latitudes, and since the highest HNO3 values are observed in October and November, a source associated solely with polar stratospheric clouds cannot explain the deficiencies in the chemistry. The role of heterogeneous processes on background aerosols is reviewed in light of these results.

Rood, Richard B.↗

Three-dimensional supersonic vortex breakdown

Three-dimensional supersonic vortex-breakdown problems in bound and unbound domains are solved. The solutions are obtained using the time-accurate integration of the unsteady, compressible, full Navier-Stokes (NS) equations. The computational scheme is an implicit, upwind, flux-difference splitting, finite-volume scheme. Two vortex-breakdown applications are considered in the present paper. The first is for a supersonic swirling jet which is issued from a nozzle into a supersonic uniform flow at a lower Mach number than that of the swirling jet. The second is for a supersonic swirling flow in a configured circular duct. In the first application, an extensive study of the effects of grid fineness, shape and grid-point distribution on the vortex breakdown is presented. Four grids are used in this study and they show a substantial dependence of the breakdown bubble and shock wave on the grid used. In the second application, the bubble-type and helix-type vortex breakdown have been captured.

Kandil, Osama A.↗

Three dimensional inventories of aircraft emissions

Three dimensional inventories of fuel burned and emissions (NO(x), CO, and hydrocarbons) have been developed on a 1 deg latitude by 1 deg longitude by 1 km altitude grid for scheduled commercial air traffic (passenger jet, cargo, and turboprop aircraft) for 1990 and projected to the year 2015. Emission scenarios have also been calculated for projected fleets of Mach 2 and Mach 2.4 high speed civil transports. The methodology and results are discussed. These emission inventories are now in use in the assessment of aircraft emissions impact by NASA.

Baughcum, Steven L.↗