Search NASA⌕ Search

SEARCH · Search NASA

Results for “wavefront”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28
All sourcesNASA NTRSDOE OSTI
NASA NTRS1973

CIT photoheliograph functional verification unit test program

Tests of the 2/3-meter photoheliograph functional verification unit FVU were performed with the FVU installed in its Big Bear Solar Observatory vacuum chamber. Interferometric tests were run both in Newtonian (f/3.85) and Gregorian (f/50) configurations. Tests were run in both configurations with optical axis horizontal, vertical, and at 45 deg to attempt to determine any gravity effects on the system. Gravity effects, if present, were masked by scatter in the data associated with the system wavefront error of 0.16 lambda rms ( = 6328A) apparently due to problems in the primary mirror. Tests showed that the redesigned secondary mirror assembly works well.

Source record↗
NASA NTRS1973

Flare-induced MHD disturbances in the corona - Moreton waves and type 2 shocks

The propagation in the corona of the magnetohydrodynamic (MHD) disturbance possibly emitted at the explosive stage in the initial phase of a flare is considered. The behavior of the MHD fast-mode wavefront, whose source is located at the flare, is calculated by using eiconal-characteristic method in the High Altitude Observatory (HAO) realistic models of coronal magnetic field and density for the days of some particular flare events. It is shown as the result that the peculiar behavior of Moreton's surface wave and the peculiar appearance in the shape and position of the type 2 burst sources can be consistently understood by considering the refraction, focussing, and formation of shocks of MHD fast-mode disturbance in the actual distribution of Alfven velocity in the corona. Moreton waves seem to appear only when the flare explosion happens to occur at the edge of an active region and faces a low-Alfven-velocity region lying on the surface. The wave, which is initially emitted isotropically is refracted into a direction in which the condition for down-refraction holds to allow chromospheric reentrance of disturbance.

Uchida, Y.↗
NASA NTRS1973

Parabolic cylinder antennas

Some of the features of single and dual parabolic-cylinder reflector antenna systems are discussed in terms of wave conversions, field divergence, and wavefronts in Fresnel and Fraunhofer regions. Beam-squinting, by mechanical displacement and electrical phase gradient methods, is introduced together with the combination of these methods. In the case of dual parabolic cylinders there is also a discussion of surface-truncation, parametric representation of surface intersections, main-aperture blockage by the subsystem, and beam squinting. A few diffraction patterns are presented to illustrate the type of data available via a formulation equivalent to the complex-vector Kirchhoff-Kottler formulation. Main and cross-polarization components of the solution are available as they are inherently part of the field solution in the Cartesian coordinate system. A means of displaying main and cross-polarization components for arbitrary beam-scanning in space is outlined. Extensions to monopulse tracking with variable-beamwidth (zooming) capability are introduced.

Schmidt, R. F.↗
NASA NTRS1974

Zone plate interferometer

A developed form of the Fresner zone-plate interferometer is described. Three basic configurations are distinguished, associated with the real and virtual first order foci of a zone plate. Related versions and higher order variants are also educed. Compensated phase zone plates used in this application are found to produce uniform amplitude wavefronts. The properties of the interferometer in this form are discussed and an example given of its high-quality performance.

Smartt, R. N.↗
NASA NTRS1974

Stellar interferometer for figure sensing of orbiting astronomical telescopes

An interferometric device designed to be located in the focal plane of a large astronomical telescope is presented. The prime application is for the forthcoming large space telescope. The device is to perform interferometry on the optical wavefront arising from a single star after it has propagated through the telescope. The concept of a focal plane figure sensor has been experimentally verified by fabricating and testing an operating laboratory breadboard figure sensor. A set of linear independent control equations are derived that define the operations for utilizing a focal plane figure sensor in the control loops for the positioning of the secondary mirror and for the active control of the primary mirror optical figure. A number of scientific experiments that could be performed with the interferometer are also briefly discussed.

Peters, W. N.↗
NASA NTRS1976

Method and apparatus for generating coherent radiation in the ultra-violet region and above by use of distributed feedback

Helium in the superfluid state emits copious amounts of radiation in the ultraviolet region when excited by an electron stream. Conventional laser action using mirrors is impossible in superfluid helium because there are no mirrors that will reflect VUV radiation. By utilizing the distributed feedback method, the superfluid helium can be made to lase. By setting up a standing wave in superfluid helium that has a wavelength equal to, or harmonically related to, half the wavelength of the photon radiation chosen to be emitted as laser radiation by the superfluid helium, the need for end mirrors to produce reflection of the laser radiation is eliminated and reflection occurs instead at the wavefronts of the standing wave. The photons leave the superfluid helium at right angles to the standing wave as coherent radiation having a very high intensity. The standing wave established in the superfluid helium may be an acoustical standing wave, a thermal standing wave (second sound), or an electric standing wave.

Saffren, M. M.↗
NASA NTRS1976

The Boeing plastic analysis capability for engines

The current BOPACE program is described as a nonlinear stress analysis program, which is based on a family of isoparametric finite elements. The theoretical, user, programmer, preprocessing aspects are discussed, and example problems are included. New features in the current program version include substructuring, an out-of-core Gauss wavefront equation solver, multipoint constraints, combined material and geometric nonlinearities, automatic calculation of inertia effects, provision for distributed as well as concentrated mechanical loads, follower forces, singular crack-tip elements, the SAIL automatic generation capability, and expanded user control over input quantity definition, output selection, and program execution. BOPACE is written in FORTRAN 4 and is currently available for both the IBM 360/370 and the UNIVAC 1108 machines.

Vos, R. G.↗
NASA NTRS1977

Zernike test. I - Analytical aspects. II - Experimental aspects

The Zernike phenomenon is interpreted in general interferometric terms to gain insight into the optimum design of disks suitable for a particular experimental situation. The design of Zernike disks for measuring small low-order aberrations is considered and evaluated; optimum parameters for disks 2, 3, 4, and 5 microns in radius are determined for an f/12 large-space-telescope system with an obscuration ratio of 0.4 at 0.6 micron. It is shown that optimization in this case provides sensitivities of better than one hundredth of a wavelength for the measurement of low-order aberrations. The procedure for manufacturing a Zernike disk is then described in detail, and results are reported for tests of a laboratory Zernike figure sensor containing a disk manufactured according to this procedure. In the tests, a laboratory wavefront-error simulator was used to introduce small aberration ranges, measurements of the changes in reimaged pupil intensity introduced by the disk were made for several aberration settings, and the measured changes were compared with the values predicted by the interferometric theory of Zernike tests. The results are found to agree within an error of one two-hundredth of a wavelength.

Golden, L. J.↗
NASA NTRS1977

Digital technique for generating synthetic aperture radar images

This paper describes a digital processing method applicable to a synthetic aperture radar, to be carried by the space shuttle or by satellites. The method uses an earth-fixed coordinate system in which corrective procedures are invoked to compensate for errors introduced by the satellite motion, earth curvature, and wavefront curvature. Among the compensations discussed are those of the coordinate system, skewness, roll, pitch, yaw, earth rotation, and others. The application of a Fast Fourier Transform in the numerical processing of the two-dimensional convolution is discussed in detail.

Van De Lindt, W. J.↗
NASA NTRS1977

An experimental study of transmission, reflection and scattering of sound in a free-jet flight simulation facility and comparison with theory

Acoustic time delays across a free-jet shear layer are measured and compared with predictions based on (1) ray paths refracted abruptly across a cylindrical vortex sheet and (2) ray paths traced through a more realistic diverging flow model. The close agreement between measurement and theory confirms that Snell's law provides an accurate prediction of wavefront refraction or angle changes across a diverging shear layer. Microphones are placed on calculated ray paths to determine the coherent transmission and internal reflection characteristics of the shear layer and also the scattering of sound by the shear-layer turbulence. The transmission data essentially verify the proposed, theoretical calibration factor which forms part of a computational procedure that is being developed to convert model jet data from a free-jet facility to inflight conditions.

Ahuja, K. K.↗
NASA NTRS1977

Monte Carlo simulation of wave sensing with a short pulse radar

A Monte Carlo simulation is used to study the ocean wave sensing potential of a radar which scatters short pulses at small off-nadir angles. In the simulation, realizations of a random surface are created commensurate with an assigned probability density and power spectrum. Then the signal scattered back to the radar is computed for each realization using a physical optics analysis which takes wavefront curvature and finite radar-to-surface distance into account. In the case of a Pierson-Moskowitz spectrum and a normally distributed surface, reasonable assumptions for a fully developed sea, it has been found that the cumulative distribution of time intervals between peaks in the scattered power provides a measure of surface roughness. This observation is supported by experiments.

Levine, D. M.↗
NASA NTRS1978

High frequency sound attenuation in short flow ducts

A geometrical acoustics approach is proposed as a practical design tool for absorbent liners in such short flow ducts as may be found in turbofan engine nacelles. As an example, a detailed methodology is presented for three different types of sources in a parallel plate duct containing uniform ambient flow. A plane wave whose wavefronts are not normal to the duct walls, an arbitrarily located point source, and a spatially harmonic line source are each considered. Optimal wall admittance distributions are found, and it is shown how to estimate the insertion loss for any admittance distribution. The extension of the methodology to realistic source distributions in variable area cylindrical or annular ducts containing arbitrary flow is shown to be conceptually straightforward and computationally practical on a vector-hardware digital computer.

Posey, J. W.↗
NASA NTRS1978

Random sampling adaptively focusing synthetic aperture radar

A high resolution narrow angle of view imaging radar system is considered that employs an airborne synthetic aperture of 600 meters operating at X-band to produce a beamwidth of approximately 0.05 mr. This system differs from a conventional SAR in that only a smaller number of wavefront samples, spaced randomly over the aperture are processed, and adaptive beamforming with open loop scanning is used. As a result, the processing requirements are reduced to within the capability of present day small computer technology, and the tolerance on flight stability is loosened by about 100:1. The system is described and initial analysis and evaluation results are presented.

Powers, E. N.↗
NASA NTRS1979

Gamma-ray burst observations from Helios-2

Observations of five gamma-ray bursts made with the solar orbiter Helios-2 are reported. Wavefront timing from Helios-2, at distances of up to 1.98 AU, to Vela-5A and -6A, in Earth orbit, provides source location bands as narrow as 2 arc minutes, although several degrees in length. The burst intensities and time profiles measured in interplanetary space by Helios-2 are the same as those observed near the earth, ruling out a narrow-beam interplanetary origin model. Also, the source direction bands for these events are inconsistent with the directions of all known celestial X-ray objects, X-ray bursters and high-energy gamma-ray source regions. The gamma-ray burst source objects therefore appear to form a distinct class from all lower energy X-ray or higher energy gamma ray emitters.

Cline, T. L.↗
NASA NTRS1978

'Smart', remote holographic processor based on the materials characteristics of LiNbO3

A class of 'Smart' remote holographic processors based on the material characteristics of LiNbO3 is introduced. The processors rely on holographic subtraction to detect differences in optical wavefronts that are spatially modulated to reflect either incoming or reference information. The state of the art of their fabrication and performance is described in the following paper. This paper outlines the principles of holography and photorefractivity that make these processors possible. Particular emphasis is placed on a potential mode of operation termed self-subtraction, in which the holographic processor is able to adapt to changes in reference information without the need for commands from an external operator.

Vahey, D. W.↗
NASA NTRS1979

Effect of mid- and high-spatial frequencies on optical performance

In many of today's telescopes the effects of surface errors on image quality and scattered light are very important. The influence of optical fabrication surface errors on the performance of an optical system is discussed. The methods developed by Hopkins (1957) for aberration tolerancing and Barakat (1972) for random wavefront errors are extended to the examination of mid- and high-spatial frequency surface errors. The discussion covers a review of the basic concepts of image quality, an examination of manufacturing errors as a function of image quality performance, a demonstration of mirror scattering effects in relation to surface errors, and some comments on the nature of the correlation functions. Illustrative examples are included.

Noll, R. J.↗
NASA NTRS1979

Gamma-ray burst observations from Helios 2

Observations of five gamma-ray bursts made with the solar orbiter Helios 2 are reported. Wavefront timing from Helios 2, at distances of up to 1.98 AU, to Vela 5A and 6A, in earth orbit, provides source location bands as narrow as 2 arcmin, although several degrees in length. The burst intensities and time profiles measured in interplanetary space by Helios 2 are the same as those observed near the earth, ruling out a narrow-beam interplanetary origin model. Also, the source direction bands for these events are inconsistent with the directions of all known celestial X-ray objects, X-ray bursters, and high-energy gamma-ray source regions. The gamma-ray burst source objects therefore appear to form a class distinct from all lower-energy X-ray or higher energy gamma-ray emitters.

Cline, T. L.↗
NASA NTRS1980

Aero-optical characterization of aircraft optical turrets by holography, interferometry and shadowgraph

Density variations in the aircraft boundary layer, turret wakes and shock waves create distortion of an optical wavefront through associated refractive index variations. Such effects can be observed directly through optical flow visualization. The application of holographic interferometry, wave shearing interferometry, and laser shadowgraph to observe and quantify such effects is described. Examples of the results from five different wind tunnel tests are presented. The examples show that diagnostics have provided valuable qualitiative and quantitiative data. These include (1) wake dimensions, (2) optical strength of the flow field, (3) turbulence characterization, (4) shock location, and (5) direct observation of areo-optical effects.

Trolinger, J. D.↗