Search NASA⌕ Search

SEARCH · Search NASA

Results for “yield analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28

Recognition of surface lithologic and topographic patterns in southwest Colorado with ADP techniques

Analysis of ERTS-1 multispectral data by automatic pattern recognition procedures is applicable toward grappling with current and future resource stresses by providing a means for refining existing geologic maps. The procedures used in the current analysis already yield encouraging results toward the eventual machine recognition of extensive surface lithologic and topographic patterns. Automatic mapping of a series of hogbacks, strike valleys, and alluvial surfaces along the northwest flank of the San Juan Basin in Colorado can be obtained by minimal man-machine interaction. The determination of causes for separable spectral signatures is dependent upon extensive correlation of micro- and macro field based ground truth observations and aircraft underflight data with the satellite data.

Melhorn, W. N.↗

A stack algorithm for source coding with a fidelity criterion

Although coding of sources with respect to a fidelity criterion was first proposed by Shannon in 1959, only recently have effective schemes been developed. Another such algorithm based on a stack is described. Like the author's other algorithms (Jelinek and Anderson, 1971, 1973), this algorithm is conceived with tree codes in mind. It has various strengths and weaknesses relative to the earlier two, which are explored. By itself, the algorithm has an interesting mathematical analysis that yields insight into the faster-than-exponential behavior of tree variables and provides a new characterization of the rate-distortion function.

Anderson, J. B.↗

Observation of a cosmic gamma-ray burst on Apollo 16. I - Temporal variability and energy spectrum

A cosmic gamma-ray event occurring April 27, 1972 at 10.68 UT was observed by gamma-ray and X-ray spectrometers on Apollo 16 as well as by Vela 6A. Analysis has yielded a detailed time profile of the entire event, an energy spectrum covering three order of magnitude (2.0 to 7.9 KeV and 0.067 to 5.1 MeV) and a source location. A well-defined onset prior to the main impulse period and a probable precursor are reported. The total energy of the event over the observed range was 2 x 10 to the minus 4th power ergs/sq cm. The data indicate the presence of a hard component which persists during the entire event, with a softer variable component becoming dominant during the most explosive burst portion.

Metzger, A. E.↗

Finite-element solution for a combined radiative-conductive analysis with mixed diffuse-specular surface characteristics

The finite-element method has been applied to solve a combined radiative-conductive heat transfer problem for a large space telescope similar to those used in orbiting satellites. The derivation of the underlying matrices and associated solution algorithm for a 2-D triangular element is presented in detail. The resulting expressions for this triangular element typify such an analysis, which yields constitutive matrices when the heat equation is cast in the matrix form. The relevant matrices include those pertaining to thermal conductance, internal heat generation, radiative exchanges, and all possible external thermal loadings. Emphasis is placed on the treatment of non-linear radiative interchange between surfaces in an enclosure having mixed diffuse-specular surface characteristics. Essential differences in governing equations describing these distinctive surface characteristics are identified. Concluding remarks are drawn from an example simulating a Cassegrainian space telescope.

Lee, H.-P.↗

A subvortex technique for the close approach to a discretized vortex sheet

The close-approach problem associated with flow calculation methods based on vortex-lattice theory was examined numerically using two-dimensional discretized vortex sheets. The analysis first yields a near-field radius of approximately the distance apart of the vortices in the lattice; only within this distance from the sheet are the errors arising from the discretization significant. Various modifications to the discrete vortices are then considered with the objective of reducing the errors. This leads to a near-field model in which a vortex splits into an increasing number of subvortices as it is approached. The subvortices, whose strengths vary linearly from the vortex position, are evenly distributed along an interpolated curve passing through the basic vortices. This subvortex technique can be extended to the three-dimensional case and is efficient because the number of vortices is effectively increased, but only where and when needed.

Maskew, B.↗

Pulsed X-ray observations of Cen X-3 from Ariel-5

The 4.8 second X-ray pulsations from Centaurus X-3 were monitored by the MSSL collimated proportional counter on board Ariel-5 between 18-27 January 1975. Analysis of the source Doppler effect shows that the pulsation period of Cen X-3 decreased by 3.70 + or - 0.04 milliseconds during the preceding 2.3 years. The Doppler analysis also yields updated values for the binary phase and period of Cen X-3. Phase zero occurred at JD 2442438.628 + or - 0.003, and the average heliocentric binary period between October 1972 and January 1975 was 2.087129 + or - 0.000007 days. Light curves of the 4.8 second pulsations in the 3-9 keV band are characterized by two pronounced peaks, in contrast with the single peak profiles observed by Uhuru.

Tuohy, I. R.↗

A simulation study of earth radiation budget data interpretation

The paper describes a simulation of a filtering analysis which yields radiation distributions, measured by a wide-field-of-view radiometer on board an earth satellite, on a scale smaller than the field of view of the instrument. Mathematical models are developed to represent an orbiting wide-field-of-view radiometer to provide simulated measurement data. The simulated measurements are analyzed by a data inversion technique to obtain estimates of the radiation heat fluxes at the top of the atmosphere. By comparing the estimated field to a real radiation field, the effects of directional model errors and sampling strategies are revealed.

Smith, G. L.↗

An information system design for watershed-wide modeling of water loss to the atmosphere using remote sensing techniques

Results are presented of a study intended to develop a general location-specific remote-sensing procedure for watershed-wide estimation of water loss to the atmosphere by evaporation and transpiration. The general approach involves a stepwise sequence of required information definition (input data), appropriate sample design, mathematical modeling, and evaluation of results. More specifically, the remote sensing-aided system developed to evaluate evapotranspiration employs a basic two-stage two-phase sample of three information resolution levels. Based on the discussed design, documentation, and feasibility analysis to yield timely, relatively accurate, and cost-effective evapotranspiration estimates on a watershed or subwatershed basis, work is now proceeding to implement this remote sensing-aided system.

Khorram, S.↗

Time delay occultation data of the Helios spacecraft for probing the electron density distribution in the solar corona

S-band time delay measurements were collected from the spacecraft Helios A and B during three solar occultations in 1975/76 within heliocentric distances of about 3 and 215 earth radius in terms of range, Doppler frequency shift, and electron content. Characteristic features of measurement and data processing are described. Typical data sets are discussed to probe the electron density distribution near the sun (west and east limb as well) including the outer and extended corona. Steady-state and dynamical aspects of the solar corona are presented and compared with earth-bound-K-coronagraph measurements. Using a weighted least squares estimation, parameters of an average coronal electron density profile are derived in a preliminary analysis to yield electron densities at r = 3, 65, 215 earth radius. Transient phenomena are discussed and a velocity of propagation v is nearly equal to 900 km/s is determined for plasma ejecta from a solar flare observed during an extraordinary set of Helios B electron content measurements.

Edenhofer, P.↗

Time delay occultation data of the Helios spacecrafts and preliminary analysis for probing the solar corona

S-band time delay measurements were collected from the spacecrafts Helios A and B during three solar occultations in 1975/76 within heliocentric distances of about 3 and 215 solar radii in terms of range, Doppler frequency shift, and electron content. A description is given concerning some characteristic features of the methods of measurement and data processing. Typical data sets are discussed to probe the electron density distribution near the sun (west and east limb as well) including the outer and extended corona. Steady-state and dynamical aspects of the solar corona are presented and compared with earth-bound K-coronagraph measurements. Using a weighted least squares estimation 3 parameters of an average coronal electron density profile are derived in a preliminary analysis to yield electron densities of about 130 billion; 100 million; 7 million/cu m at r?3; 65; 215 solar radii. Transient phenomena are discussed and a velocity of propagation v approximately 900 km/s for plasma ejecta from a solar flare is determined from an extraordinary set of Helios B electron content measurements on April 30/May 1, 1976.

Edenhofer, P.↗

The Viking X ray fluorescence experiment - Sampling strategies and laboratory simulations

Ten samples of Mars regolith material (six on Viking Lander 1 and four on Viking Lander 2) have been delivered to the X ray fluorescence spectrometers as of March 31, 1977. An additional six samples at least are planned for acquisition in the remaining Extended Mission (to January 1979) for each lander. All samples acquired are Martian fines from the near surface (less than 6-cm depth) of the landing sites except the latest on Viking Lander 1, which is fine material from the bottom of a trench dug to a depth of 25 cm. Several attempts on each lander to acquire fresh rock material (in pebble sizes) for analysis have yielded only cemented surface crustal material (duricrust). Laboratory simulation and experimentation are required both for mission planning of sampling and for interpretation of data returned from Mars. This paper is concerned with the rationale for sample site selections, surface sampler operations, and the supportive laboratory studies needed to interpret X ray results from Mars.

Baird, A. K.↗

Reduction of particulate carryover from a pressurized fluidized bed

A bench scale fluidized bed combustor was constructed with a conical shape so that the enlarged upper part of the combustor would also serve as a granular bed filter. The combustor was fed coal and limestone. Ninety-nine tests of about four hours each were conducted over a range of conditions. Coal-to-air ratio varied from 0.033 to 0.098 (all lean). Limestone-to-coal ratio varied from 0.06 to 0.36. Bed depth varied from 3.66 to 8.07 feet. Temperature varied from 1447 to 1905 F. Pressure varied from 40 to 82 psia. Heat transfer area had the range zero to 2.72 ft squared. Two cone angles were used. The average particulate carry over of 2.5 grains/SCF was appreciably less than cylindrical fluidized bed combustors. The carry over was correlated by multiple regression analysis to yield the dependence on bed depth and hence the collection efficiency, which was 20%. A comparison with a model indicated that the exhaust port may be below the transport disengaging height for most of the tests, indicating that further reduction in carry over and increase in collection efficiency could be affected by increasing the freeboard and height of the exhaust port above the bed.

Patch, R. W.↗

Application of the superposition principle to solar-cell analysis

The superposition principle of differential-equation theory - which applies if and only if the relevant boundary-value problems are linear - is used to derive the widely used shifting approximation that the current-voltage characteristic of an illuminated solar cell is the dark current-voltage characteristic shifted by the short-circuit photocurrent. Analytical methods are presented to treat cases where shifting is not strictly valid. Well-defined conditions necessary for superposition to apply are established. For high injection in the base region, the method of analysis accurately yields the dependence of the open-circuit voltage on the short-circuit current (or the illumination level).

Lindholm, F. A.↗

Reduction of particulate carryover from a pressurized fluidized bed

A bench-scale pressurized fluidized bed combustor (PFBC) constructed with a conical shape to reduce the particulate carryover is examined. The combustor was fed coal and limestone with the coal to air ratio varying from 0.033 to 0.098 (all lean) and the coal to limestone ratio varying from 0.06 to 0.36. Two cone angles were used and it is shown that the average particulate carryover of 2.5 grains/SCF is appreciably less than cylindrical fluidized bed combustors. In addition the carryover was correlated by multiple regression analysis to yield the dependence on bed depth and hence the collection efficiency, which was 20%. Finally, a comparison with a model indicated that the exhaust port may be below the transport disengaging height for most of the tests showing that further improvements could be achieved by increasing the freeboard height of the exhaust port above the bed.

Patch, R. W.↗

Application of a transonic potential flow code to the static aeroelastic analysis of three-dimensional wings

Since the aerodynamic theory is nonlinear, the method requires the coupling of two iterative processes - an aerodynamic analysis and a structural analysis. A full potential analysis code, FLO22, is combined with a linear structural analysis to yield aerodynamic load distributions on and deflections of elastic wings. This method was used to analyze an aeroelastically-scaled wind tunnel model of a proposed executive-jet transport wing and an aeroelastic research wing. The results are compared with the corresponding rigid-wing analyses, and some effects of elasticity on the aerodynamic loading are noted.

Whitlow, W., Jr.↗

Application of a transonic potential flow code to the static aeroelastic analysis of three-dimensional wings

A method for including elastic effects in steady, transonic wing analysis is presented. Since the aerodynamic theory is nonlinear, the method requires the coupling of two iterative processes - an aerodynamic analysis and a structural analysis. A full potential analysis code, FL022, is combined with a linear structural analysis to yield aerodynamic load distributions on and deflections of elastic wings. This method was used to analyze an aeroelastically-scaled wind tunnel model of a proposed executive-jet transport wing and an aeroelastic research wing. The results are compared with the corresponding rigid-wing analyses, and some effects of elasticity on the aerodynamic loading are noted.

Whitlow, W., Jr.↗

Thorium concentrations in the lunar surface. V - Deconvolution of the central highlands region

The distribution of thorium in the lunar central highlands measured from orbit by the Apollo 16 gamma-ray spectrometer is subjected to a deconvolution analysis to yield improved spatial resolution and contrast. Use of two overlapping data fields for complete coverage also provides a demonstration of the technique's ability to model concentrations several degrees beyond the data track. Deconvolution reveals an association between Th concentration and the Kant Plateau, Descartes Mountain and Cayley plains surface formations. The Kant Plateau and Descartes Mountains model with Th less than 1 part per million, which is typical of farside highlands but is infrequently seen over any other nearside highland portions of the Apollo 15 and 16 ground tracks. It is noted that, if the Cayley plains are the result of basin-forming impact ejecta, the distribution of Th concentration with longitude supports an origin from the Imbrium basin rather than the Nectaris or Orientale basins. Nectaris basin materials are found to have a Th concentration similar to that of the Descartes Mountains, evidence that the latter may have been emplaced as Nectaris basin impact deposits.

Metzger, A. E.↗

Characteristics of Basaltic Lava Flows on Venus

Some ideas relating to the formation of lava flows on Venus are reviewed. The surface morphological features seen in the panoramic images made by the Venera 13 and 14 landers are examined in detail. The major element compositions measured by the Soviet probes indicate that the surface rocks at the Venera 13 site resemble a terrestrial tholeite composite whereas the Venera 14 rocks are similar to terrestrial alkali basalts. Few data exist on the rheological properties of such magma types on Earth; these properties are a strong function of magma volatile content, and there are important gaps in our knowledge of the typical volatiles to be associated with the magmas on Venus. However, the suggestion that Venusian magmas may be water poor together with consideration of the fact that the high Venusian surface temperatures may cause magmas to experience up to 50 K less cooling during their rise to the surface than corresponding terrestrial counterparts, leads to the finding that Venusian magmas may typically have plastic viscosities, E, up to a factor of three greater than terrestrial counterparts on eruption. A similar analysis of yield strength variations with temperature, magma composition and volatile content suggests that temperature will exert the main control and that Venusian magma yield strengths, Y, may be a factor of several times smaller than those of terrestrial equivalents.

Wilson, L.↗