Search NASA⌕ Search

SEARCH · Search NASA

Results for “ALKYLATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29

Novel anti-cancer agents: design, synthesis, biological activity, molecular docking, and MD simulations of 2, 3, 4, 5-tetrahydro-1H-pyrido-[4,3-b]indole derivatives

In the previous research, our group designed and synthesized 2,3,4,5-tetrahydro-1H-pyrido-[4,3-b] indoles, which showed high anti-tumor activity. In this study, a series of novel 2,3,4,5-tetrahydro-1H-pyrido-[4,3-b] indole derivatives were designed by introducing an alkyl or aralkyl and a sulfonyl group, which are considered as the pharmacophores of some antitumor drugs based on the combination principles, and synthesized. The antiproliferative activity of all the target compounds were evaluated against Hela, A549, HepG2, and MCF-7 cell lines using the MTT assay in vitro. The results were represented by IC{sub 50} values. All compounds showed moderate to excellent antiproliferative activity with IC{sub 50} values between 0 μM and 100 μM against cancer cells. The proliferations of Hela, A549, HepG2, and MCF-7 cell lines were inhibited in a dose-dependent manner, and the cytolytic activity was markedly inhibited at the same time. The IC{sub 50} values of intermediate 3 inhibited against Hela, A549, HepG2, and MCF-7 cell lines were 52.75, 50.30, 60.31, and 54.39 μM, respectively, which were higher than the new compounds that we expected. The compounds 4a–4d bearing sulfonyl, substituted by electron donating group, showed moderate to significant antiproliferative activity, in which compound 4c was the best with the IC{sub 50} values of 13.71, 9.42, 15.06, and 14.77 μM, and these results suggested that the introduction of sulfonyl could increase the antiproliferative activity of 2,3,4,5-tetrahydro-1H-pyrido-[4,3-b]indole. Compounds 4e–4g bearing alkyl, phenyl, and arylated alkyl produced good antiproliferative activity and the IC{sub 50} value of 4g was lower than 30 μM. The target compounds were more potent against A549 compared to the other three cell lines. Molecular docking studies revealed the binding orientations of all the synthesized compounds in the active site of c-Met. Moreover, molecular dynamics simulations have been performed to evaluate the binding stabilities between the synthesized compounds and their receptors.

60 APPLIED LIFE SCIENCES↗

Crystal structure of a thermophilic O 6-alkylguanine-DNA alkyltransferase-derived self-labeling protein-tag in covalent complex with a fluorescent probe

Highlights: • The labeling of proteins is a valid approach for studying their function. • SNAP-tag{sup ®} is a self-labeling protein tag that binds different probes (e.g. SVG). • SsOGT-H{sup 5} is a thermostable alternative to the SNAP-tag{sup ®} technology. • The SsOGT-H{sup 5}-SVG structure reveals new details of protein-probe interaction. • The SsOGT-H{sup 5}-SVG structure highlights new OGTs structure-function relationships. The self-labeling protein tags are robust and versatile tools for studying different molecular aspects of cell biology. In order to be suitable for a wide spectrum of experimental conditions, it is mandatory that these systems are stable after the fluorescent labeling reaction and do not alter the properties of the fusion partner. SsOGT-H{sup 5} is an engineered variant alkylguanine-DNA-alkyl-transferase (OGT) of the hyperthermophilic archaeon Sulfolobus solfataricus, and it represents an alternative solution to the SNAP-tag{sup ®} technology under harsh reaction conditions. Here we present the crystal structure of SsOGT-H{sup 5} in complex with the fluorescent probe SNAP-Vista Green{sup ®} (SsOGT-H{sup 5}-SVG) that reveals the conformation adopted by the protein upon the trans-alkylation reaction with the substrate, which is observed covalently bound to the catalytic cysteine residue. Moreover, we identify the amino acids that contribute to both the overall protein stability in the post-reaction state and the coordination of the fluorescent moiety stretching-out from the protein active site. We gained new insights in the conformational changes possibly occurring to the OGT proteins upon reaction with modified guanine base bearing bulky adducts; indeed, our structural analysis reveals an unprecedented conformation of the active site loop that is likely to trigger protein destabilization and consequent degradation. Interestingly, the SVG moiety plays a key role in restoring the interaction between the N- and C-terminal domains of the protein that is lost following the new conformation adopted by the active site loop in the SsOGT-H{sup 5}-SVG structure. Molecular dynamics simulations provide further information into the dynamics of SsOGT-H{sup 5}-SVG structure, highlighting the role of the fluorescent ligand in keeping the protein stable after the trans-alkylation reaction.

60 APPLIED LIFE SCIENCES↗

Effect of ZSM-5 acidity on aromatic product selectivity during upgrading of pine pyrolysis vapors

The impact of catalyst acidity on the selectivity of upgraded biomass pyrolysis products was studied by passing pine pyrolysis vapors over five ZSM-5 catalysts of varying acidity at 500 degrees C. The SiO 2 -to-Al 2 O 3 ratio (SAR) of the ZSM-5 zeolite was varied from 23 to 280 to control the acidity of the catalyst and the composition of upgraded products. The upgraded product stream was analyzed by GCMS. Additionally, catalysts were characterized using temperature programmed desorption, diffuse-reflectance FTIR spectroscopy, N 2 physisorption, and X-ray diffraction. The results showed that the biomass pyrolysis vapors were highly deoxygenated to form a slate of aromatic hydrocarbons over all of the tested ZSM-5 catalysts. As the overall acidity of the ZSM-5 increased the selectivity toward alkylated (substituted) aromatics (e.g., xylene, dimethyl-naphthalene, and methyl-anthracene) decreased while the selectivity toward unsubstituted aromatics (e.g., benzene, naphthalene, and anthracene) increased. Additionally, the selectivity toward polycyclic aromatic compounds (2-ring and 3-ring) increased as catalyst acidity increased, corresponding to a decrease in acid site spacing. The increased selectivity toward less substituted polycyclic aromatic compounds with increasing acidity is related to the relative rates of cyclization and alkylation reactions within the zeolite structure. As the acid site concentration increases and sites become closer to each other, the formation of additional cyclization products occurs at a greater rate than alkylated products. The ability to adjust product selectivity within 1-, 2-, and 3-ring aromatic families, as well as the degree of substitution, by varying ZSM-5 acidity could have significant benefits in terms creating a slate of upgraded biomass pyrolysis products to meet specific target market demands.

09 BIOMASS FUELS↗

Can activated sludge treatments and advanced oxidation processes remove organophosphorus flame retardants?

This study aims to determine the occurrence of 10 OPFRs (including chlorinated, nonchlorinated alkyl and aryl compounds) in influent, effluent wastewaters and partitioning into sludge of 5 wastewater treatment plants (WWTP) in Catalonia (Spain). All target OPFRs were detected in the WWTPs influents, and the total concentration ranged from 3.67 µg L{sup −1} to 150 µg L{sup −1}. During activated sludge treatment, most OPFRs were accumulated in the sludge at concentrations from 35.3 to 9980 ng g{sup −1} dw. Chlorinated compounds tris(2-chloroethyl) phosphate (TCEP), tris(2-chloroisopropyl) phosphate (TCIPP) and tris(2,3-dichloropropyl) phosphate (TDCPP) were not removed by the conventional activated sludge treatment and they were released by the effluents at approximately the same inlet concentration. On the contrary, aryl compounds tris(methylphenyl) phosphate (TMPP) and 2-ethylhexyl diphenyl phosphate (EHDP) together with alkyl tris(2-ethylhexyl) phosphate (TEHP) were not detected in any of the effluents. Advanced oxidation processes (UV/H{sub 2}O{sub 2} and O{sub 3}) were applied to investigate the degradability of recalcitrant OPFRs in WWTP effluents. Those detected in the effluent sample (TCEP, TCIPP, TDCPP, tributyl phosphate (TNBP), tri-iso-butyl phosphate (TIBP) and tris(2-butoxyethyl) phosphate (TBOEP)) had very low direct UV-C photolysis rates. TBOEP, TNBP and TIBP were degraded by UV/H{sub 2}O{sub 2} and O{sub 3}. Chlorinated compounds TCEP, TDCPP and TCIPP were the most recalcitrant OPFR to the advanced oxidation processes applied. The study provides information on the partitioning and degradability pathways of OPFR within conventional activated sludge WWTPs. - Highlights: • OPFRs were detected in wastewater and sludge of all studied WWTPs. • Alkyl and chloroalkyl phosphates were present in secondary treatment effluents. • TBOEP, TNBP and TIBP were degraded by UV/H{sub 2}O{sub 2} and O{sub 3} treatment. • TCEP, TCIPP and TDCPP were resistant to both secondary and tertiary treatment.

54 ENVIRONMENTAL SCIENCES↗

Adsorption of hydroxamic acid ligands for improved extraction of rare earth elements from monazite ores

Efficient separation of rare earth element (REE) ores via froth flotation requires the development of novel ligands with enhanced adsorption capacity and selectivity. To realize these advances, understanding the mechanisms underlying interactions between the ligand and mineral surfaces is essential. This study systematically evaluates the adsorption behavior of alkyl- and aromatic alkyl-substituted hydroxamic acid ligands on monazite surfaces using complementary spectroscopic techniques, including UV–visible (UV–vis) spectroscopy, Raman spectroscopy, infrared spectroscopy, and vibrational sum frequency generation (SFG) spectroscopy, together with the ab initio molecular dynamics (AIMD) simulations. Among the studied ligands, octanohydroxamic acid (OHA) and 4-ethoxy-N,2-dihydroxybenzamide (EDHBA) exhibit high adsorption capacity under basic pH (8–10) by forming multilayers on the surface. OHA has a higher equilibrium adsorption capacity compared to EDHBA, but it forms a less stable multilayer susceptible to disruption in the presence of interfering ions. AIMD results show that OHA adopts a single stable chelating geometry, while EDHBA exhibits multiple binding modes involving distinct interactions with La surface atoms and phosphate-bound oxygens, resulting in more complex adsorption kinetics. The variations in surface binding and intermolecular interactions observed between alkyl and aromatic molecules influence the differences in adsorption kinetics, equilibrium adsorption capacities on the mineral surface, and their flotation performance. This work provides valuable insight into the adsorption mechanism of ligands at mineral interfaces, which is crucial for guiding the design of new ligands with enhanced separation performance.

Zhou, Muchu [ORNL] (ORCID:0000000182650215)↗

Investigation of the Rechargeability of Li-O2 Batteries in Non-aqueous Electrolyte

In order to understand the nature of the limited cycle life and poor energy efficiency associated with the secondary Li-O¬2 batteries the discharge products of primary Li-O2 cells at different depth of discharge (DOD) are systematically analyzed in this work. It is revealed that if discharged to 2.0 V a small amount of Li2O2 coexist with Li2CO3 and RO-(C=O)-OLi) in alkyl carbonate-based electrolyte. Further discharging the air electrodes to below 2.0 V the amount of Li2CO3 and LiRCO3 increases significantly due to the severe electrolyte decomposition. There is no Li2O detected in this alkyl carbonate electrolyte regardless of DOD. It is also found that the alkyl carbonate based electrolyte begins to decompose at 4.0 V during charging under the combined influences from the high surface area carbon, the nickel metal current collector and the oxygen atmosphere. Accordingly the impedance of the Li-O2 cell continues to increase after each discharge and recharge process indicating a repeated plating of insoluble lithium salts on the carbon surface. Therefore the whole carbon electrode becomes completely insulated only after a few cycles and loses the function of providing active tri-phase regions for the Li-oxygen batteries.

25 ENERGY STORAGE↗

Synthesis and characterization of a new family of alkylammonium–chromium phosphates with worm-like morphology

A series of layered alkylammonium–chromium phosphates, formulated as [C{sub n}H{sub 2n+1}NH{sub 3}]Cr(OH)PO{sub 4} (n=2–6), has been synthesized under hydrothermal conditions. The interlayer spacing, increasing linearly with the increase of alkyl-chain length from 13.61 Å (n=2) to 21.20 Å (n=6), is occupied by a double sheet of packed amine molecules with a tilt angle of ca. 51° respect to the inorganic sheet. The powders are constituted by circular plates (diameter=0.5–3 µm, thickness=∼50 nm) with central holes when n=4–6, stacked in axial direction showing worm-like morphologies. The presence of holes, and some corrugated and zig-zag fashions observed on the edge of thin circular plates are the most probable ways for the reduction of the steric tensions between organic and inorganic portions in these hybrid materials. The thermal and thermo-oxidative stability of selected compounds have been studied, including the determination of activation energy data for the decomposition processes. - Graphical abstract: A novel series of layered alkylammonium–chromium phosphates, [C{sub n}H{sub 2n+1}NH{sub 3}]Cr(OH)PO{sub 4} (n=2–6), was obtained and characterized. The interlayer spacing, increasing linearly with the increase of alkyl-chain length, is occupied by a double sheet of packed amine molecules. The powders are constituted by circular plates (diameter=0.5–3 µm, thickness=∼50 nm) with central holes when n=4–6, stacked in axial direction showing worm-like morphologies. - Highlights: • A series of alkylammonium–chromium phosphates has been obtained by the hydrothermal method. • The interlayer spacing increases linearly with the increase of alkyl-chain length. • The interlayer spacing is occupied by a double sheet of packed amine molecules. • The powders are constituted by stacked circular plates showing wormlike morphology. • Thermal behaviour depends on the atmosphere used and the intercalated amine.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Can ionic liquids be used as templating agents for controlled design of uranium-containing nanomaterials?

Graphical abstract: - Highlights: • Uranium oxides nanoparticles prepared using ionic liquids. • IL cation alkyl length impacts oxide morphology. • Low temperature UO{sub 2} synthesis. - Abstract: Nanostructured uranium oxides have been prepared in ionic liquids as templating agents. Using the ionic liquids as reaction media for inorganic nanomaterials takes advantage of the pre-organized structure of the ionic liquids which in turn controls the morphology of the inorganic nanomaterials. Variation of ionic liquid cation structure was investigated to determine the impact on the uranium oxide morphologies. For two ionic liquid cations, increasing the alkyl chain length increases the aspect ratio of the resulting nanostructured oxides. Understanding the resulting metal oxide morphologies could enhance fuel stability and design.

36 MATERIALS SCIENCE↗

Inelastic neutron scattering study on boson peaks of imidazolium-based ionic liquids

Low energy excitations of 1-alkyl-3-methylimidazolium ionic liquids (ILs) have been investigated by means of neutron spectroscopy. In the spectra of inelastic scattering, a broad excitation peak referred to as a “boson peak” appeared at 1–3 meV in all of the ILs measured. The intensity of the boson peak was enhanced at the Q positions corresponding to the diffraction peaks, reflecting the in-phase vibrational nature of the boson peak. Furthermore the boson peak energy (E BP ) was insensitive to the length of the alkyl-chain but changed depending on the radius of the anion. From the correlation among E BP , the anion radius, and the glass transition temperature T g , we conclude that both E BP and T g in ILs are predominantly governed by the inter-ionic Coulomb interaction which is less influenced by the alkyl-chain length. Furthermore, we also found that the E BP is proportional to the inverse square root of the molecular weight as observed in molecular glasses.

74 ATOMIC AND MOLECULAR PHYSICS↗

Evolution of organic matter during composting of different organic wastes assessed by CPMAS {sup 13}C NMR spectroscopy

In this paper, the evolution of organic matter (OM) during composting of different mixtures of various organic wastes was assessed by means of chemical analyses and CPMAS {sup 13}C NMR spectroscopy measured during composting. The trends of temperatures and C/N ratios supported the correct evolution of the processes. The CPMAS {sup 13}C NMR spectra of all composting substrates indicated a reduction in carbohydrates and an increase in aromatic, phenolic, carboxylic and carbonylic C which suggested a preference by microorganisms for easily degradable C molecules. The presence of hardly degradable pine needles in one of the substrates accounted for the lowest increase in alkyl C and the lowest reduction in carbohydrates and carboxyl C as opposite to another substrate characterized by the presence of a highly degradable material such as spent yeast from beer production, which showed the highest increase of the alkyl C/O-alkyl C ratio. The highest increase of COOH deriving by the oxidative degradation of cellulose was shown by a substrate composed by about 50% of plant residues. The smallest increases in alkyl C/O-alkyl C ratio and in polysaccharides were associated to the degradation of proteins and lipids which are major components of sewage sludge. Results obtained were related to the different composition of fresh organic substrates and provided evidence of different OM evolution patterns as a function of the initial substrate composition.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The Story of 5d Metallocorroles: From Metal–Ligand Misfits to New Building Blocks for Cancer Phototherapeutics

Porphyrin chemistry is Shakespearean: over a century of study has not withered the field’s apparently infinite variety. Heme proteins continually astonish us with novel molecular mechanisms, while new porphyrin analogues bowl us over with unprecedented optical, electronic, and metal-binding properties. Within the latter domain, corroles occupy a special place, exhibiting a unique and rich coordination chemistry. The 5d metallocorroles are arguably the icing on that cake. New Zealand chemist Penny Brothers has used the word “misfit” to describe the interactions of boron, a small atom with a predilection for tetrahedral coordination, and porphyrins, classic square-planar ligands. Steve Jobs lionized misfits as those who see things differently and push humanity forward. Both perspectives have inspired us. The 5d metallocorroles are misfits in that they encapsulate a large 5d transition metal ion within the tight cavity of a contracted porphyrin ligand. Given the steric mismatch inherent in their structures, the syntheses of some 5d metallocorroles are understandably capricious, proceeding under highly specific conditions and affording poor yields. Three broad approaches may be distinguished. (a) In the metal–alkyl approach, a free-base corrole is exposed to an alkyllithium and the resulting lithio-corrole is treated with an early transition metal chloride; a variant of the method eschews alkyllithium and deploys a transition metal–alkyl instead, resulting in elimination of the alkyl group as an alkane and insertion of the metal into the corrole. This approach is useful for inserting transition metals from groups 4, 5, and, to some extent, 6, as well as lanthanides and actinides. (b) In our laboratory, we have often deployed a low-valent organometallic approach for the middle transition elements (groups 6, 7, 8, and 9). The reagents are low-valent metal–carbonyl or −olefin complexes, which lose one or more carbon ligands at high temperature, affording coordinatively unsaturated, sticky metal fragments that are trapped by the corrole nitrogens. (c) Finally, a metal acetate approach provides the method of choice for gold and platinum insertion (groups 10 and 11). This Account provides a first-hand perspective of the three approaches, focusing on the last two, which were largely developed in our laboratory. In general, the products were characterized with X-ray crystallography, electrochemistry, and a variety of spectroscopic methods. The physicochemical data, supplemented by relativistic DFT calculations, have provided fascinating insights into periodic trends and relativistic effects. An unexpected feature of many 5d metallocorroles, given their misfit character, is their remarkable stability under thermal, chemical, and photochemical stimulation. Many of them also exhibit long triplet lifetimes on the order of 100 μs and effectively sensitize singlet oxygen formation. Many exhibit phosphorescence in the near-infrared under ambient conditions. Furthermore, water-soluble ReO and Au corroles exhibit impressive photocytotoxicity against multiple cancer cell lines, promising potential applications as cancer phototherapeutics. We thus envision a bright future for the compounds as rugged building blocks for new generations of therapeutic and diagnostic (theranostic) agents.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The Role of the Side Chain on the Performance of N-type Conjugated Polymers in Aqueous Electrolytes

Here, we report a design strategy that allows the preparation of solution processable n-type materials from low boiling point solvents for organic electrochemical transistors (OECTs). The polymer backbone is based on NDI-T2 copolymers where a branched alkyl side chain is gradually exchanged for a linear ethylene glycol-based side chain. A series of random copolymers was prepared with glycol side chain percentages of 0, 10, 25, 50, 75, 90, and 100 with respect to the alkyl side chains. These were characterized to study the influence of the polar side chains on interaction with aqueous electrolytes, their electrochemical redox reactions, and performance in OECTs when operated in aqueous electrolytes. We observed that glycol side chain percentages of >50% are required to achieve volumetric charging, while lower glycol chain percentages show a mixed operation with high required voltages to allow for bulk charging of the organic semiconductor. A strong dependence of the electron mobility on the fraction of glycol chains was found for copolymers based on NDI-T2, with a significant drop as alkyl side chains are replaced by glycol side chains.

36 MATERIALS SCIENCE↗

Synthesis and Characterization of Macrocyclic Ionic Liquids for CO 2 Separation

In this work, a series of ionic liquids with symmetric, macrocyclic cations composed of N-heterocycles connected by alkyl or ether linkages coupled with bis(trifluoromethylsulfonyl)imide or bis(pentafluoroethanesulfonyl)amide anions were synthesized to explore their application in CO 2 separation. These novel ionic liquids showed selective physical absorption of CO 2 compared to N 2 making them potential candidates for carbon capture. We examined the effect of cation structure on the physicochemical and separations properties of the ionic liquid and showed that these ionic liquids exhibit an inverse relationship between molar volume and CO 2 sorption capacity following the trend predicted by models based on regular solution theory. The fractional free volumes of the ionic liquids were lower than typical alkyl-imidazolium ionic liquids despite the cyclic structure of the cations which could be related to the flexibility of the alkyl and ether linkages. These results provide added insight into our understanding of structure–property relationships in CO 2 solubility in ionic liquids and afford a path toward enhancing the separations properties based on structure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Nitrilotriacetamides: Nitric Acid and Water Extraction and Physicochemical Properties

Nitrilotriacetamides are an emerging class of extractants that have been identified as promising candidates for a variety of separation schemes. Systems incorporating these ligands are prone to third-phase formation at high loading, but this can be mitigated by increasing the alkyl chain length or adding a phase modifier (e.g., 1-octanol). In this work, the impacts of these modifications on HNO 3 extraction, H 2 O extraction, and physiochemical properties (interfacial tension, viscosity, and density) are examined. The studies show that ligand alkyl chain length has very little impact on HNO 3 and H 2 O extraction, whereas the addition of 10% octanol significantly increases extraction of both HNO 3 and H 2 O. Viscosity and interfacial ten-sion are impacted by HNO 3 concentration, alkyl chain length, and the presence of phase modifier but remain in a range that should be compatible with commonly used solvent contacting equipment. Additional studies of physiochemical properties at variable ligand concentration suggest that a change in aggregation occurs above approximately 10-50 mM ligand. Thermodynamic modeling of distribution ratios and spectroscopic studies aimed at understanding speciation in the presence of HNO 3 are also reported. Further, these experiments suggest that the first equivalent of extracted HNO 3 interacts with both the central amine and carbonyl groups of the ligand. The spectroscopic changes at higher HNO 3 concentrations are relatively minor, suggesting additional HNO 3 is associated in an outer-sphere manner

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Temperature Dependence of Volumetric and Dynamic Properties of Imidazolium-Based Ionic Liquids

Atomistically detailed molecular dynamics simulations were used to investigate the temperature dependence of the specific volume, dynamic properties, and viscosity of linear alkyl chain ([C n C 1 Im][NTf 2 ], n = 3–7) and branched alkyl chain ([(n – 2)mC n–1 C 1 Im][NTf 2 ]) ionic liquids (ILs). The trend of the glass transition temperature (T g ) values obtained in the simulations as a function of the alkyl chain length of cations was similar to the trend seen in experiments. In addition, the system relaxation behavior as determined from the temperature dependence of the diffusion coefficient, rotational relaxation time, and viscosity close to T g was observed to follow the Vogel–Fulcher–Tammann expression. Furthermore, the reciprocal of the diffusion coefficient of the anion and cation in both linear and branched IL systems showed a linear correlation with viscosity, thus confirming the validity of the Stokes–Einstein relationship for these systems. Similarly, the average rotational relaxation time of the ions was also found to correlate linearly with the viscosity of the ILs over a wide range of temperatures, thereby validating the Debye–Stokes–Einstein relationship for the ILs. These simulation findings suggest that the temperature dependence of the relaxation time of ILs is very similar to that of other glass-forming liquids.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Confocal Raman Microscopy Investigation of Phospholipid Monolayers Deposited on Nitrile-Modified Surfaces in Porous Silica Particles

Phospholipid bilayers deposited on a variety of surfaces offer models for investigation of the lipid membrane structure and supports for biocompatible sensors. Hybrid-supported phospholipid bilayers (HSLBs) are stable membrane models for these investigations, typically prepared by self-assembly of a lipid monolayer over an n-alkane-modified surface. HSLBs have been prepared on n-alkyl chain-modified silica and used for lipophilicity-based chromatographic separations. The structure of these hybrid bilayers differs from vesicle membranes where the lipid head group spacing is greater due to interdigitation of the lipid acyl chains with the underlying n-alkyl chains bound to the silica surface. This interdigitated structure exhibits a broader melting transition at a higher temperature due to strong interactions between the lipid acyl chains and the immobile n-alkyl chains bound to silica. In the present work, we seek to reduce the interactions between a lipid monolayer and its supporting substrate by self-assembly of 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC) on porous silica functionalized with nitrile-terminated surface ligands. The frequency of Raman scattering of the surface -C≡N stretching mode at the lipid–nitrile interface is consistent with an n-alkane-like environment and insensitive to lipid head group charge, indicating that the lipid acyl chains are in contact with the surface nitrile groups. The head group area of this lipid monolayer was determined from the within-particle phospholipid concentration and silica specific surface area and found to be 54 ± 2 Å 2 , equivalent to the head group area of a DMPC vesicle bilayer. The structure of these nitrile-supported phospholipid monolayers was characterized below and above their melting transition by confocal Raman microscopy and found to be nearly identical to DMPC vesicle bilayers. Their narrow gel-to-fluid-phase melting transition is equivalent to dispersed DMPC vesicles, indicating that the acyl chain structure on the nitrile support mimics the outer leaflet structure of a vesicle membrane.

36 MATERIALS SCIENCE↗

Hybrid-Supported Bilayers Formed with Mixed-Charge Surfactants on C 18 -Functionalized Silica Surfaces

Mixtures of cationic-anionic surfactants have been demonstrated to spontaneously form ordered monolayers at hydrophobic-hydrophilic boundaries including air-water and oil-water interfaces. Here, confocal Raman microscopy is used to investigate the structure of hybrid-supported surfactant bilayers (HSSBs) formed by deposition of a distal leaflet of mixed cationic-anionic surfactants onto a proximal leaflet of n-alkane (C 18 ) chains on the interior surfaces of chromatographic silica particles. The surface coverage of the two surfactants in a hybrid bilayer was determined from carbon analysis and the relative Raman scattering of their respective head-groups. Within the measurement uncertainty, the stoichiometric ratio of the two surfactants is one-to-one, equivalent to mixed-charge-surfactant monolayers at air-water and oil-water interfaces and consistent with the role of the head-group electrostatic interactions in their formation. When self-assembled on the hydrophobic surface, pairs of oppositely-charged n-alkyl-chain surfactants resemble a phospholipid (phosphati¬dylcholine) molecule, with its zwitterionic head group and two hydrophobic acyl-chain tails. Indeed, the structure of these hybrid-supported surfactant bilayers on C 18 -modified silica surfaces is similar to that of hybrid-supported lipid bilayers (HSLBs) on the same supports, but with denser and more-ordered n-alkyl chains. Hybrid-supported surfactant bilayers exhibit a melting phase transition (gel to liquid-crystalline phase) with structural and energetic characteristics similar to hybrid-supported bilayers prepared from a zwitterionic phospholipid of the same alkyl chain length. These mixed-charge surfactants on n-alkane modified silica are stable in water over time (months), results that suggest the potential use of these hybrid bilayers for generating supported lipid bilayer-like surfaces or for separation applications.

36 MATERIALS SCIENCE↗

Organic Semiconductor-Containing Supramolecules: Effect of Small Molecule Crystallization and Molecular Packing

Small molecules (SMs) with unique optical or electronic properties provide an opportunity to incorporate functionality into block copolymer (BCP)-based supramolecules. However, the assembly of supramolecules based on these highly crystalline molecules differs from their less crystalline counterparts. In this work, two families of organic semiconductor SMs are investigated, where the composition of the crystalline core, the location (side- vs end-functionalization) of the alkyl solubilizing groups, and the constitution (branched vs linear) of the alkyl groups are varied. With these SMs, we present a systematic study of how the phase behavior of the SMs affects the overall assembly of these organic semiconductor-based supramolecules. The incorporation of SMs has a large effect on the interfacial curvature, the supramolecular periodicity, and the overall supramolecular morphology. The crystal packing of the SM within the supramolecule does not necessarily lead to the assembly of the comb block within the BCP microdomains, as is normally observed for alkyl-containing supramolecules. An unusual lamellar morphology with a wavy interface between the microdomains is observed due to changes in the packing structure of the small molecule within BCP microdomains. Since the supramolecular approach is modular and small molecules can be readily switched out, present studies provide useful guidance toward access supramolecular assemblies over several length scales using optically active and semiconducting small molecules.

36 MATERIALS SCIENCE↗