Search NASA⌕ Search

SEARCH · Search NASA

Results for “Advanced visualization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29

Central Valley Water Resources II: Groundwater Sustainability Management Support in the California Central Valley using GRACE and InSAR Datasets

California’s Central Valley is one of the most productive agricultural regions in the United States, producing a fourth of the nation’s food supply. The water demand in this region is heavily dependent on groundwater resources, resulting in over pumping of aquifers at unsustainable rates during recent periods of severe drought. Over the past century, Central Valley aquifers have experienced a significant decline in groundwater levels, resulting in land subsidence and irreversible loss in groundwater storage. In 2014, the state enacted the Sustainable Groundwater Management Act, requiring high and medium priority subbasins to suspend overdraft and achieve sustainable levels of pumping and recharge by 2042.The California Department of Water Resources (DWR) oversees subbasin groundwater management; however, monitoring remains challenging due to sparse and inconsistent in situ data. To assist the DWR, this project developed a user-friendly executable application and an interactive visualization tool to quantify groundwater storage and land subsidence trends using remotely sensed and in situ data. The team utilized NASA’s Gravity Recovery and Climate Experiment (GRACE), GRACE Follow-On (GRACE-FO), Sentinel-1 C-band Synthetic Aperture Radar (C-SAR) interferograms, and Advanced Land Observing Satellite 2 (ALOS-2) Phased Array L-band Synthetic Aperture Radar 2 (PALSAR-2) interferograms in conjunction with well and GPS measurements to analyze groundwater and subsidence trends. GRACE and well data returns produced a strong Pearson correlation of .84, while Sentinel-1 and GPS data returns produced a Pearson correlation of .41 over the entire Central Valley. These findings suggest remotely sensed GRACE and interferometric SAR data can be used in the absence of in situ data.

DEVELOP Project Summary↗

Workspace visualization and time-delay telerobotic operations

The paper examines the performance of telerobotic tasks where the operator and robot are physically separated, and a comunication time delay of up to several seconds between them exists. This situation is applicable to space robotic servicing-assembly-maintenance operations on low earth or geosynchronous orbits with a ground-based command station. Attention is given to two developments which address advanced time-delay teleoperations for unstructured tasks: (1) the 'phantom robot', a real-time predictive graphics simulator developed to allow teleoperator eye-to-hand coordination or robot free-space kinematics under a time delay of several seconds; and (2) shared compliance control, a modified form of automatic electromechanical impedance control employed in parallel with manual position control to permit soft contact and grasp compliance with workpiece geometry under a time delay of several seconds.

Schenker, P. S.↗

A New Architecture for Visualization: Open Mission Control Technologies

Open Mission Control Technologies (MCT) is a new architecture for visualisation of mission data. Driven by requirements for new mission capabilities, including distributed mission operations, access to data anywhere, customization by users, synthesis of multiple data sources, and flexibility for multi-mission adaptation, Open MCT provides users with an integrated customizable environment. Developed at NASAs Ames Research Center (ARC), in collaboration with NASAs Advanced Multimission Operations System (AMMOS) and NASAs Jet Propulsion Laboratory (JPL), Open MCT is getting its first mission use on the Jason 3 Mission, and is also available in the testbed for the Mars 2020 Rover and for development use for NASAs Resource Prospector Lunar Rover. The open source nature of the project provides for use outside of space missions, including open source contributions from a community of users. The defining features of Open MCT for mission users are data integration, end user composition and multiple views. Data integration provides access to mission data across domains in one place, making data such as activities, timelines, telemetry, imagery, event timers and procedures available in one place, without application switching. End user composition provides users with layouts, which act as a canvas to assemble visualisations. Multiple views provide the capability to view the same data in different ways, with live switching of data views in place. Open MCT is browser based, and works on the desktop as well as tablets and phones, providing access to data anywhere. An early use case for mobile data access took place on the Resource Prospector (RP) Mission Distributed Operations Test, in which rover engineers in the field were able to view telemetry on their phones. We envision this capability providing decision support to on console operators from off duty personnel. The plug-in architecture also allows for adaptation for different mission capabilities. Different data types and capabilities may be added or removed using plugins. An API provides a means to write new capabilities and to create data adaptors. Data plugins exist for mission data sources for NASA missions. Adaptors have been written by international and commercial users. Open MCT is open source. Open source enables collaborative development across organizations and also makes the product available outside of the space community, providing a potential source of usage and ideas to drive product design and development. The combination of open source with an Apache 2 license, and distribution on GitHub, has enabled an active community of users and contributors. The spectrum of users for Open MCT is, to our knowledge, unprecedented for mission software. In addition to our NASA users, we have, through open source, had users and inquires on projects ranging from Internet of Things, to radio hobbyists, to farming projects. We have an active community of contributors, enabling a flow of ideas inside and outside of the space community.

Trimble, Jay↗

Effects of 50,000 hours of thermal aging on graphite/epoxy and graphite/polyimide composites

Thermal effects on tensile strengths of advanced composite systems have been determined for exposure times of 100 to 50,000 hours (5.7 years). Exposures were conducted at both ambient and reduced pressures at two temperatures for each composite. At the completion of the various aging periods, specimens were removed from the specially constructed aging furnaces, visually examined, and tensile tested at elevated temperature. After tensile testing, many of the thermal aging specimens were examined using a scanning electron microscope. Results of these studies are presented, and the changes in properties and the degradation mechanisms during high-temperature aging are discussed and illustrated using metallographic techniques.

Kerr, J. R.↗

Planetary Rover Localization Within Orbital Maps

This paper introduces an advanced rover localization system suitable for autonomous planetary exploration in the absence of Global Positioning System (GPS) infrastructure. Given an existing terrain map (image and elevation) obtained from satellite imagery and the images provided by the rover stereo camera system, the proposed method determines the best rover location through visual odometry, 3D terrain and hori- zon matching. The system is tested on data retrieved from a 3 km traverse of the Basalt Hills quarry in California where the GPS track is used as ground truth. Experimental results show the system presented here reduces by over 60 the localization error obtained by wheel odometry.

localization↗

A ROS-based Simulator for Testing the Enhanced Autonomous Navigation of the Mars 2020 Rover

In order to achieve the ambitious objectives of the Mars 2020 (M2020) mission, in particular the ability to autonomously traverse more challenging terrains more efficiently, new surface mobility software was developed for Enhanced Navigation (ENav). That decision was made early in the project, before most of the new surface flight software (FSW) existed, which created a need for a separate framework where the new navigation algorithms could be quickly prototyped and tested, before more realistic FSW-based testbeds became available. The JPL robotics team chose the Robot Operating System [1] (ROS) as the environment in which to test the new ENav algorithms. This made it possible to write the algorithms in the C language required by the FSW, so they could be directly ported over to the flight module later on, while leveraging all the C++ libraries and tools provided by ROS for simulation and testing. The ENav algorithms were developed as a separate C library, and stubs were used to replace any FSW-specific code, such as Event Reporting (EVRs) and data products (DPs). A ROS simulator was developed to generate a rich set of varied 3D terrains representative of the candidate Mars landing sites and simulate the physics of the rover motion, the point cloud perceived by the rover’s stereo vision system, and the new thinking-while-driving (TWD) navigation logic which directs the rover to drive autonomously to user-specified waypoints. To simulate the rover motion and perception, a ROS node was developed that uses a software library called HyperDrive Sim (HDSim), which is a wrapper for the Rover Sequencing and Visualization Program [2] (RSVP). That library provides roverterrain settling, realistic slip modelling, and camera rendering capability based on the rover’s NavCam machine vision models. To simulate the navigation logic, a ROS node was created that initializes and runs the ENav algorithms in a way that mimics the FSW execution, while also providing the capability to load and replay data products, including re-running the recorded inputs through the ENav algorithms for testing. An engineering Graphical User Interface (GUI) was also developed to visualize various elements, such as the rover pose during the drive, the simulated and perceived terrain, the selected local and global paths to the goal, the evaluated candidate paths and the reasons why they were rejected, the keep-in and keep-out zones (KIOZs), etc. Finally, an advanced Monte Carlo (MC) framework that can run many simulations in parallel on the Cloud and automatically generate reports that capture the key ENav performance metrics was developed to evaluate the system in a statisticallymeaningful way. This paper provides an overview of the ROSbased simulator used for testing the M2020 ENav algorithms.

Toupet, Olivier↗

An Experimental System for Strategic Flight Path Management in Advanced Air Mobility

In the concept envisioned for Urban Air Mobility (UAM) operations, fleets of electric vertical takeoff and landing (eVTOL) vehicles would operate between vertiports distributed within a densely populated area. These operations would be largely independent from the existing air traffic control system and would place the responsibility for flight planning and aircraft separation on fleet operators. The fourth major level on the UAM Maturity Level scale, UML-4, relies on “collaborative and responsible” automation to enable operations in non-visual conditions with medium traffic density (hundreds of aircraft in one metropolitan region) and medium complexity. This level of service places many requirements on automation systems to assist the operators of these aircraft. NASA has developed the Autonomous Operations Planner (AOP), a reference prototype Flight Path Management automation system, and has modified AOP to support research of anticipated UML-4 operations. AOP creates a four-dimensional flight plan conforming to the constraints of these operations, evaluates and modifies the flight plan during flight as conditions and constraints evolve, and coordinates the flight plan with other airspace users and with service providers. This version of AOP has been integrated into the Sikorsky Autonomy Research Aircraft and used in a flight test activity. In this paper we discuss anticipated characteristics of UAM operations, modifications that were made to AOP to adapt to that environment or to support the flight test, and observations of software and aircraft performance during the flight test. The aircraft achieved four-dimensional conformance with the flight plan and AOP provided adequate planning in almost all cases. We discuss improvements that could be made to AOP to address deficiencies that were observed.

Autonomous Operations Planner↗

An Experimental System for Strategic Flight Path Management in Advanced Air Mobility

In the concept envisioned for Urban Air Mobility (UAM) operations, fleets of electric vertical takeoff and landing (eVTOL) vehicles would operate between vertiports distributed within a densely populated area. These operations would be largely independent from the existing air traffic control system and would place the responsibility for flight planning and aircraft separation on fleet operators. The fourth major level on the UAM Maturity Level scale, UML-4, relies on “collaborative and responsible” automation to enable operations in non-visual conditions with medium traffic density (hundreds of aircraft in one metropolitan region) and medium complexity. This level of service places many requirements on automation systems to assist the operators of these aircraft. NASA has developed the Autonomous Operations Planner (AOP), a reference prototype Flight Path Management automation system, and has modified AOP to support research of anticipated UML-4 operations. AOP creates a four-dimensional flight plan conforming to the constraints of these operations, evaluates and modifies the flight plan during flight as conditions and constraints evolve, and coordinates the flight plan with other airspace users and with service providers. This version of AOP has been integrated into the Sikorsky Autonomy Research Aircraft and used in a flight test activity. In this paper we discuss anticipated characteristics of UAM operations, modifications that were made to AOP to adapt to that environment or to support the flight test, and observations of software and aircraft performance during the flight test. The aircraft achieved four-dimensional conformance with the flight plan and AOP provided adequate planning in almost all cases. We discuss improvements that could be made to AOP to address deficiencies that were observed.

Autonomous Operations Planner↗

Technologies for global change earth observations

Advances in the areas of space-based observations, data/information analysis, and spacecraft/operations for the studying of global changes are discussed. Research involving systems analysis, observation technologies, information technologies, and spacecraft technologies is examined. Consideration is given to cryogenic coolers, IR arrays, laser and submillimeter sensing, large array CCD, information visualization, design knowledge capture, optical communications, multiinstrument pointing, propulsion, space environmental effects, and platform thermal systems.

Johnston, Gordon I.↗

Analysis of unsteady pressures induced on a body by a rotor

An analysis was conducted on the unsteady pressures measured on a body surface in proximity to a rotor. Unsteady pressures were measured at strategic points on the body in forward flight at various combination of advance ratio, rotor thrust, and tip-path-plane angle. It was found that the local values of unsteady pressure were significantly altered by small changes in rotor thrust and advance ratio; tip-path-plane angle variations had a much smaller effect. Four characteristic pressure signatures representative of (1) blade passage, (2) close wake interactions with the body, (3) wake impingement on the body, and (4) postwake impingement were distinguished. These classifications were supported by correlations with shadowgraphic flow visualization of the rotor wake/body interaction, as well as unsteady potential flow models. This general classification of the surface pressure signatures has permitted a greater physical understanding of the overall air loads and possible mechanisms responsible for the interactional effects between a helicopter rotor and its fuselage.

Bi, Nai-Pei↗

Computational aerodynamics - The next generation

Continued advances in the various elements that comprise the field of computational fluid dynamics (CFD) are promoting a radically different approach to the aerodynamic design and analysis of aerospace vehicles and systems. The elements of CFD generally include numerical algorithm development, transition and turbulence modeling, surface modeling, and grid generation, scientific visualization and validation methodologies. This paper discusses the research progress and prospects for the future in each of these elements within NASA's CFD and Experimental Validation Program. The applicability of computational methods for the purposes of understanding complex flow phenomena, exploring aerodynamic concepts, and providing vehicle-design input is also addressed.

Hessenius, Kristin A.↗

In-simulator assessment of trade-offs arising from mixture of color cuing and monocular, binoptic, and stereopsis cuing information

The use of monochrome Helmet Mounted Display (HMD) systems is becoming prevalent in today's complex flight mission environment. These HMD systems can provide stereopsis cueing as an almost natural byproduct for binocular helmet systems of an additional image generation source is provided. The addition of color cueing capability is much more difficult. The application of stereopsis cueing to advanced HMD and heads-down flight display concepts has demonstrated gains in pilot situation awareness and improved task performance. To provide stereopsis, binocular HMD systems must trade some of the total field-of-view (FOV) available from their two monocular fields to obtain a partial overlap region. The visual field then provides a mixture of cues, with monocular regions on both peripheries, and, in the overlapped center, a binoptic (the same image to both eyes) or, if lateral disparity is introduced to produce two images, a stereo region. The goal of this research was to assess the trade-offs arising from the mixture of color cueing and monocular, biocular, and stereopsis cueing information in peripheral monitoring displays as encountered in HMD systems. The accompanying effect of stereopsis cueing in the foveal display of tracking information was also assessed.

Williams, Steven P.↗

Model-Based Systems Engineering in Concurrent Engineering Centers

Concurrent Engineering Centers (CECs) are specialized facilities with a goal of generating and maturing engineering designs by enabling rapid design iterations. This is accomplished by co-locating a team of experts (either physically or virtually) in a room with a focused design goal and a limited timeline of a week or less. The systems engineer uses a model of the system to capture the relevant interfaces and manage the overall architecture. A single model that integrates other design information and modeling allows the entire team to visualize the concurrent activity and identify conflicts more efficiently, potentially resulting in a systems model that will continue to be used throughout the project lifecycle. Performing systems engineering using such a system model is the definition of model-based systems engineering (MBSE); therefore, CECs evolving their approach to incorporate advances in MBSE are more successful in reducing time and cost needed to meet study goals. This paper surveys space mission CECs that are in the middle of this evolution, and the authors share their experiences in order to promote discussion within the community.

systems engineering↗

Model-Based Systems Engineering in Concurrent Engineering Centers

Concurrent Engineering Centers (CECs) are specialized facilities with a goal of generating and maturing engineering designs by enabling rapid design iterations. This is accomplished by co-locating a team of experts (either physically or virtually) in a room with a narrow design goal and a limited timeline of a week or less. The systems engineer uses a model of the system to capture the relevant interfaces and manage the overall architecture. A single model that integrates other design information and modeling allows the entire team to visualize the concurrent activity and identify conflicts more efficiently, potentially resulting in a systems model that will continue to be used throughout the project lifecycle. Performing systems engineering using such a system model is the definition of model-based systems engineering (MBSE); therefore, CECs evolving their approach to incorporate advances in MBSE are more successful in reducing time and cost needed to meet study goals. This paper surveys space mission CECs that are in the middle of this evolution, and the authors share their experiences in order to promote discussion within the community.

Iwata, Curtis↗

Model-Based Systems Engineering in Concurrent Engineering Centers

Concurrent Engineering Centers (CECs) are specialized facilities with a goal of generating and maturing engineering designs by enabling rapid design iterations. This is accomplished by co-locating a team of experts (either physically or virtually) in a room with a narrow design goal and a limited timeline of a week or less. The systems engineer uses a model of the system to capture the relevant interfaces and manage the overall architecture. A single model that integrates other design information and modeling allows the entire team to visualize the concurrent activity and identify conflicts more efficiently, potentially resulting in a systems model that will continue to be used throughout the project lifecycle. Performing systems engineering using such a system model is the definition of model-based systems engineering (MBSE); therefore, CECs evolving their approach to incorporate advances in MBSE are more successful in reducing time and cost needed to meet study goals. This paper surveys space mission CECs that are in the middle of this evolution, and the authors share their experiences in order to promote discussion within the community.

MODEL↗

Advanced blade tip seal system, volume 2

The results of the endurance and performance engine tests conducted on monocrystal/abrasive-tipped CF6-50 Stage 1 HPT blades fabricated in Task VII of MATE Project 3 are presented. Two engine tests are conducted. The endurance engine test is conducted for 1000 C cycles. The performance engine test is conducted on a variable cycle core engine. Posttest evaluation and analyses of the blades and shrouds included visual, dimensional, and destructive evaluations.

Zelahy, J. W.↗

Where is the Human in the Loop? Human Factors Analysis of Extended Visual Line of Sight Unmanned Aerial System Operations within a Remote Operations Environment

Many envisioned technological and conceptual innovations focus on allocating more functions to automation, relegating the human as an afterthought if not a nuisance. Yet, until complete autonomy is realized, the human will remain “in the loop”. The National Aeronautics and Space Administration is supporting research for the development and maturation of automated technologies and architectures for the future of advanced air mobility. Standing up a remote operations center used to control, manage, and monitor multiple highly automated vehicles is an important step towards realizing the advanced air mobility vision. At the National Aeronautics and Space Administration’s Langley Research Center, a remote operation center exists and has been tested using humans piloting simulated vehicles. In this paper, we explore the human element within live flight operations that rely on increasingly automated technologies. Four ground control station operators performed multiple live flight operations. We employed a naturalistic approach and relied on qualitative data such as interviews and discussions with subject matter experts to help facilitate discovery. The present work evaluates the functions that the human and the automation had during the live operations, lists psychological constructs that may have promoted or reduced task performance, and provides recommendations on design of the remote operations environment and training of future ground control station operators.

Advanced Air Mobility↗

Where is the Human in the Loop? Human Factors Analysis of Extended Visual Line of Sight Unmanned Aerial System Operations within a Remote Operations Environment

Many envisioned technological and conceptual innovations focus on allocating more functions to automation, relegating the human as an afterthought if not a nuisance. Yet, until complete autonomy is realized, the human will remain “in the loop”. The National Aeronautics and Space Administration is supporting research for the development and maturation of automated technologies and architectures for the future of advanced air mobility. Standing up a remote operations center used to control, manage, and monitor multiple highly automated vehicles is an important step towards realizing the advanced air mobility vision. At the National Aeronautics and Space Administration’s Langley Research Center, a remote operation center exists and has been tested using humans piloting simulated vehicles. In this paper, we explore the human element within live flight operations that rely on increasingly automated technologies. Four ground control station operators performed multiple live flight operations. We employed a naturalistic approach and relied on qualitative data such as interviews and discussions with subject matter experts to help facilitate discovery. The present work evaluates the functions that the human and the automation had during the live operations, lists psychological constructs that may have promoted or reduced task performance, and provides recommendations on design of the remote operations environment and training of future ground control station operators.

Advanced Air Mobility↗