Search NASA⌕ Search

SEARCH · Search NASA

Results for “CAS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29

Airborne Aerosol in Situ Measurements during TCAP: A Closure Study of Total Scattering

We present here a framework for calculating the total scattering of both non-absorbing and absorbing aerosol at ambient conditions from aircraft data. The synergistically employed aircraft data involve aerosol microphysical, chemical, and optical components and ambient relative humidity measurements. Our framework is developed emphasizing the explicit use of the complementary chemical composition data for estimating the complex refractive index (RI) of particles, and thus obtaining improved ambient size spectra derived from Optical Particle Counter (OPC) measurements. The feasibility of our framework for improved calculations of total aerosol scattering is demonstrated for different ambient conditions with a wide range of relative humidities (from 5 to 80%) using three types of data collected by the U.S. Department of Energy (DOE) G-1 aircraft during the recent Two-Column Aerosol Project (TCAP). Namely, these three types of data employed are: (1) size distributions measured by an Ultra High Sensitivity Aerosol Spectrometer (UHSAS; 0.06-1 µm), a Passive Cavity Aerosol Spectrometer (PCASP; 0.1-3 µm) and a Cloud and Aerosol Spectrometer (CAS; 0.6- >10 µm), (2) chemical composition data measured by an Aerosol Mass Spectrometer (AMS; 0.06-0.6 µm) and a Single Particle Soot Photometer (SP2; 0.06-0.6 µm), and (3) the dry total scattering coefficient measured by a TSI integrating nephelometer at three wavelengths (0.45, 0.55, 0.7 µm) and scattering enhancement factor measured with a humidification system at three RHs (near 45%, 65% and 90%) at a single wavelength (0.525 µm). We demonstrate that good agreement (~10% on average) between the observed and calculated scattering at these three wavelengths can be obtained using the best available chemical composition data for the RI-based correction of the OPC-derived size spectra. We also demonstrate that ignoring the RI-based correction and using non-representative RI values can cause a substantial underestimation (~40% on average) and overestimation (~35% on average) of the calculated total scattering, respectively.

14 SOLAR ENERGY↗

A Comparative Analysis of Weizmannia coagulans Genomes Unravels the Genetic Potential for Biotechnological Applications

The production of biochemicals requires the use of microbial strains with efficient substrate conversion and excellent environmental robustness, such as Weizmannia coagulans species. So far, the genomes of 47 strains have been sequenced. Herein, we report a comparative genomic analysis of nine strains on the full repertoire of Carbohydrate-Active enZymes (CAZymes), secretion systems, and resistance mechanisms to environmental challenges. Moreover, Clustered Regularly Interspaced Short Palindromic Repeats (CRISPR) immune system along with CRISPR-associated (Cas) genes, was also analyzed. Overall, this study expands our understanding of the strain’s genomic diversity of W. coagulans to fully exploit its potential in biotechnological applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

CACTI: Best Estimate Aerosol Size Distribution by airborne measurements

These data were collected during the Cloud, Aerosol, and Complex Terrain Interactions (CACTI; https://www.arm.gov/research/campaigns/amf2018cacti ) field campaign in the Sierras de Córdoba mountain range of north-central Argentina as part of ARM Aerial Facility (AAF) deployment. The ARM Aerial Facility Gulfstream-1 was operated from Las Higueras Airport (IATA: RCU, ICAO: SAOC), Río Cuarto, Córdoba, Argentina, for the Intensive Observation Period (IOP) from Nov. 1 through Dec. 15, 2018. The G-1 aircraft performed 22 research flights over the first ARM Mobile Facility (AMF1) location in the Sierras de Córdoba mountain range to measure atmospheric state and turbulence, cloud water content and droplet size distributions, aerosol precursor gases, aerosol chemical composition and size distributions. The current data set presents Best Estimate Aerosol Size Distribution: a merged aerosol size distribution composed of the data from 5 sensors; three aerosol spectrometers: Scanning Mobility Particle Sizer (SMPS), Ultra-High Sensitivity Aerosol Spectrometer (UHSAS), and Passive Cavity Aerosol Spectrometer (PCASP); and two cloud probes: Cloud Aerosol Spectrometer (CAS) and Fast Cloud Droplet Probe (FCDP). The SMPS data were interpolated to 1 second from “native” time resolution of about 64 second to match all other probes.

54 ENVIRONMENTAL SCIENCES↗

Analysis of twelve genomes of the bacterium Kerstersia gyiorum from brown-throated sloths ( Bradypus variegatus ), the first from a non-human host

Kerstersia gyiorum is a Gram-negative bacterium found in various animals, including humans, where it has been associated with various infections. Knowledge of the basic biology of K. gyiorum is essential to understand the evolutionary strategies of niche adaptation and how this organism contributes to infectious diseases; however, genomic data about K. gyiorum is very limited, especially from non-human hosts. In this work, we sequenced 12 K. gyiorum genomes isolated from healthy free-living brown-throated sloths (Bradypus variegatus) in the Parque Estadual das Fontes do Ipiranga (São Paulo, Brazil), and compared them with genomes from isolates of human origin, in order to gain insights into genomic diversity, phylogeny, and host specialization of this species. Phylogenetic analysis revealed that these K. gyiorum strains are structured according to host. Despite the fact that sloth isolates were sampled from a single geographic location, the intra-sloth K. gyiorum diversity was divided into three clusters, with differences of more than 1,000 single nucleotide polymorphisms between them, suggesting the circulation of various K. gyiorum lineages in sloths. Genes involved in mobilome and defense mechanisms against mobile genetic elements were the main source of gene content variation between isolates from different hosts. Sloth-specific K. gyiorum genome features include an IncN2 plasmid, a phage sequence, and a CRISPR-Cas system. The broad diversity of defense elements in K. gyiorum (14 systems) may prevent further mobile element flow and explain the low amount of mobile genetic elements in K. gyiorum genomes. Gene content variation may be important for the adaptation of K. gyiorum to different host niches. This study furthers our understanding of diversity, host adaptation, and evolution of K. gyiorum, by presenting and analyzing the first genomes of non-human isolates.

59 BASIC BIOLOGICAL SCIENCES↗

Proposal and Development of a High Voltage Variable Frequency Alternating Current Power System for Hybrid Electric Aircraft

The development of ultra-efficient commercial vehicles and the transition to low-carbon emission propulsion are seen as thrust paths within NASA Aeronautics. A critical enabler to these paths comes in the form of hybrid-electric propulsion systems. For megawatt-class systems, the best power system topology for these hybrid-electric propulsion systems is debatable. Current proposals within NASA and the Aero community suggest using a combination of AC and DC for power transmission. This paper proposes an alternative to the current thought model through the use of a primarily high voltage AC power generation, transmission, and distribution systems, supported by the Convergent Aeronautics Solutions (CAS) Project. This system relies heavily on the use of dual-fed induction machines, which provide high power densities, minimal power conversion, and variable speed operation. The paper presents background on the project along with the system architecture, development status and preliminary results.

Propulsion↗

Synthesis, Electronic Structure, and Reactivity of a Planar Four‐Coordinate, Cobalt–Imido Complex

Abstract A four‐coordinate cobalt–imido complex, ( t Bu mPNP)Co=NMes ( t Bu mPNP=modified PNP pincer ligand) has been synthesized from addition of 2,4,6‐trimethylphenylazide (Mes–N 3 ) to the corresponding dinitrogen complex. The solid‐state structure determined by X‐ray diffraction established a rare, idealized planar geometry with a Co=N bond distance of 1.716(2) Å. Magnetic measurements revealed an S =1 ground state with CAS‐SCF calculations supporting radical character on the imide nitrogen. Thermolysis of the cobalt–imido compound induced selective insertion of the imido group into a Co−P bond and yielded a three‐coordinate cobalt complex with a distorted T‐shaped geometry. Transition state analysis conducted with DFT calculations established the thermodynamic stability of the P–N coupled product and provided insight into the exclusive selectivity.

Park, Yoonsu↗

Synthesis, Electronic Structure, and Reactivity of a Planar Four–Coordinate, Cobalt–Imido Complex

A four-coordinate cobalt imido complex, ( tBu mPNP)Co=NMes ( tBu mPNP = modified PNP pincer ligand) has been synthesized from addition of 2,4,6-trimethylphenylazide (Mes–N 3 ) to the corresponding dinitrogen complex. The solid-state structure determined by X-ray diffraction established a rare, idealized planar geometry with a Co=N bond distance of 1.716(2) Å. Magnetic measurements revealed an S = 1 ground state with CAS-SCF calculations supporting radical character on the imide nitrogen. Here, thermolysis of the cobalt-imido compound induced selective insertion of the imido group into a Co–P bond and yielded a three-coordinate cobalt complex with a distorted T-shaped geometry. Transition state analysis conducted with DFT calculations established the thermodynamic stability of the P–N coupled product and provided insight into the exclusive selectivity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Detection of a multi–disease biomarker in saliva with graphene field effect transistors

Human carbonic anhydrase 1 (CA1) has been suggested as a biomarker for identification of several diseases including cancers, pancreatitis, diabetes, and Sjogren’s syndrome. However, the lack of a rapid, cheap, accurate, and easy-to-use quantification technique has prevented widespread utilization of CA1 for practical clinical applications. To this end, we present a label-free electronic biosensor for detection of CA1 utilizing highly sensitive graphene field effect transistors (G-FETs) as a transducer and specific RNA aptamers as a probe. The binding of CA1 with aptamers resulted in a positive shift in Dirac voltage V D of the G-FETs, the magnitude of which depended on target concentration. These aptameric G-FET biosensors showed the binding affinity (K D ) of ~2.3 ng/ml (70 pM), which is four orders lower than that reported using a gel shift assay. This lower value of K D enabled us to achieve a detection range (10 pg/ml - 100 ng/ml) which is well in line with the clinically relevant range. These highly sensitive devices allowed us to further prove their clinical relevance by successfully detecting the presence of CA1 in human saliva samples. In conclusion, the utilization of this label-free biosensor could facilitate the early stage identification of various diseases associated with changes in concentration of CAs.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Role of Microphysical Parameterizations with Droplet Relative Dispersion in IAP AGCM 4.1

In previous studies we see that accurate descriptions of the cloud droplet effective radius (Re) and the autoconversion process of cloud droplets to raindrops (Au) can effectively improve simulated clouds and surface precipitation, and reduce the uncertainty of aerosol indirect effects in global climate models (GCMs). In this paper, we implement cloud microphysical schemes including two-moment Au and R e considering relative dispersion of the cloud droplet size distribution into version 4.1 of the Institute of Atmospheric Physics atmospheric GCM (IAP AGCM 4.1), which is the atmospheric component of the Chinese Academy of Sciences-Earth System model (CAS-ESM 1.0). An analysis of the effects of different schemes shows that the newly implemented schemes can improve both the simulated shortwave (SWCF) and longwave cloud radiative forcings (LWCF) as compared to the standard scheme in IAP AGCM 4.1. The new schemes also effectively enhance the large-scale precipitation, especially over low latitudes, although the influences of total precipitation are insignificant for different schemes. Further studies show that similar results can be found with the Community Atmosphere Model 5.1 (CAM5.1).

54 ENVIRONMENTAL SCIENCES↗

Theory of Surrogate Nuclear and Atomic Reactions with Three Charged Particles in the Final State Proceeding Through a Resonance in the Intermediate Subsystem

Within a few-body formalism, we develop a general theory of surrogate nuclear and atomic reactions with excitation of a resonance in the intermediate binary subsystem leading to three charged particles in the final state. Additionally, the Coulomb interactions between the spectator and the resonance in the intermediate state and between the three particles in the final state are taken into account. Final-state three-body Coulomb multiple-scattering effects are accounted for using the formalism of the three-body Coulomb asymptotic states based on the work published by one of the authors (A.M.M.) under the guidance of L. D. Faddeev. The formalism of the three-body Coulomb asymptotic states (CAS) was used to calculate the reaction amplitudes with three charged particles in the final state. An expression is derived for the triply differential cross section. It can be used for investigation of the Coulomb effects on the resonance line shape as well as the energy dependence of the cross section. In conclusion, we find that simultaneous inclusion of the Coulomb effects in the intermediate and final state decreases the effect of the final-state Coulomb interactions on the triply differential cross section.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Insights from 20 years of bacterial genome sequencing

Since the first two complete bacterial genome sequences were published in 1995, the science of bacteria has dramatically changed. Using third-generation DNA sequencing, it is possible to completely sequence a bacterial genome in a few hours and identify some types of methylation sites along the genome as well. Sequencing of bacterial genome sequences is now a standard procedure, and the information from tens of thousands of bacterial genomes has had a major impact on our views of the bacterial world. In this review, we explore a series of questions to highlight some insights that comparative genomics has produced. To date, there are genome sequences available from 50 different bacterial phyla and 11 different archaeal phyla. However, the distribution is quite skewed towards a few phyla that contain model organisms. But the breadth is continuing to improve, with projects dedicated to filling in less characterized taxonomic groups. The clustered regularly interspaced short palindromic repeats (CRISPR)-Cas system provides bacteria with immunity against viruses, which outnumber bacteria by tenfold. How fast can we go? Second-generation sequencing has produced a large number of draft genomes (close to 90 % of bacterial genomes in GenBank are currently not complete); third-generation sequencing can potentially produce a finished genome in a few hours, and at the same time provide methlylation sites along the entire chromosome. The diversity of bacterial communities is extensive as is evident from the genome sequences available from 50 different bacterial phyla and 11 different archaeal phyla. Genome sequencing can help in classifying an organism, and in the case where multiple genomes of the same species are available, it is possible to calculate the pan- and core genomes; comparison of more than 2000 Escherichia coli genomes finds an E. coli core genome of about 3100 gene families and a total of about 89,000 different gene families. Why do we care about bacterial genome sequencing? There are many practical applications, such as genome-scale metabolic modeling, biosurveillance, bioforensics, and infectious disease epidemiology. In the near future, high-throughput sequencing of patient metagenomic samples could revolutionize medicine in terms of speed and accuracy of finding pathogens and knowing how to treat them.

59 BASIC BIOLOGICAL SCIENCES↗

Prevention of Overcurrent and Admissible Voltage Limit Violation in Electrical Network Nodes

In a centralized emergency control system (CECS) with a third-generation algorithm, emergency control actions (CA) are selected under conditions of preventing disruption of dynamic stability, providing the required margin of stability in post-emergency condition, as well as preventing overcurrent and restricting voltage in network nodes to admissible limits. A methodology for selecting CAs for these last two conditions is described.

42 ENGINEERING↗

Shallow Embedded Strain Measurements and Analysis for a NbTi Superconducting Sextupole Coil During Cooling, Excitation, and Quench

The present study deals with strain measurements and their numerical analysis for a niobium titanium wire wounded superconducting sextupole coil in a multi-field operation environment, including cooling down, excitation, and quench. Four low-temperature resistance strain gauges with designed compensation circuits were affixed directly on the surface of the superconducting wires but within glass fiber cloth. Before the sextuple coil’s test was carried out, for the purpose of reliability, based on the designed compensation circuit, some basic experiments were carried out during cooling down, excitation, and quench. The experimental results showed that the shallow embedded low-temperature resistance strain gauges were still highly reproducible with an error of 1% for a variable magnetic field and an error of 5% for a variable thermal field by executing various modes. It shows multi-stage strain monitoring is feasible for the superconducting sextupole. In addition, a numerical multiphysics model for the sextuple coil is also built from Maxwell’s equations and the equilibrium equations for mechanical and thermal deformation. A self-tested elastic modulus of NbTi/Cu stack with epoxy, which is cut from a NbTi/Cu sextupole prototype, at low temperature is used in this simulation. The numerical results have reasonable agreement with the experimental observations and show the multiphysics model with self-tested elastic modulus can be applied to analysis strain behaviors under complicated fields before superconducting magnet assembly. The present results will also provide some strain-measuring technology and multiphysics numerical analysis on an LTS/HTS superconducting magnet developed at the Institute of Modern Physics, Chinese Academy of Sciences (IMP, CAS).

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Characteristics of Non-metallic Inclusions in Steel Obtained from Different-Sized Samplers

To determine the effect of sampler size on the detection of inclusions in liquid steel, four different-sized samplers were designed for industrial sampling from a continuous casting tundish. The samples were evaluated via scanning electron microscopy and energy-dispersive spectroscopy. With increasing sample size, the cooling rate of the sample and velocity for particle engulfment decreased. The extent of encapsulation of complex inclusions increased from 0 pct with the smallest sampler to 48.2 pct with the largest sampler. In the samplers that cooled at 41.2 and 26.7 K s{sup −1}, the major inclusions were calcium aluminates; in the larger samplers, which cooled more slowly at 8.2 and 1.0 K s{sup −1}, the complex inclusions predominately comprised Al{sub 2}O{sub 3} + (Ca, Mn)S and Al{sub 2}O{sub 3} + CaS, respectively. The sizes of the sulfides gradually increased with increasing sampler size; for example, the sulfide average diameter increased from 2.5 to 3.5 μm when the sampler inner diameter increased from 50 to 70 mm. The main direction of movement of the inclusions during the sampling process was upward.

36 MATERIALS SCIENCE↗

Effect of Deoxidation Process on Inclusion and Fatigue Performance of Spring Steel for Automobile Suspension

55SiCrA spring steel was smelted in a vacuum induction levitation furnace. The liquid steel was treated by Si deoxidation, Al modification with Ca treatment and Al modification, and the steel samples were obtained with deformable Al 2 O 3 -SiO 2 -CaO-MgO inclusions closely contacted with steel matrix, Al 2 O 3 -CaO-CaS-SiO 2 -MgO inclusions surrounded by small voids or Al 2 O 3 (> 80 pct)-SiO 2 -CaO-MgO inclusions surrounded by big voids, respectively. Effect of three types of inclusions on steel fatigue cracks was studied. The perpendicular and transverse fatigue cracks around the three types of inclusions leading to fracture were found to vary in behavior. Under the applied stress amplitude of 775 MPa, the fatigue lives of the three spring steels decreased from 4.0 × 10 7 to 3.8 × 10 7 , and to 3.1 × 10 7 cycles. For the applied stress amplitude of 750 MPa, the fatigue lives of the three spring steels decreased from 5.2 × 10 7 to 4.1 × 10 7 , and to 3.4 × 10 7 cycles. Based on the voids around inclusions, the equivalent size of initial fatigue crack has been newly defined as √(((area inclusion )/((1-CC)))), where the contraction coefficient CC of inclusion was introduced. A reliable forecast model of the critical size of inclusion leading to fracture was established by the incorporation of actual width b inclusion or diameter d inclusion of internal inclusion; the model prediction was found to be in agreement with experimental results.

36 MATERIALS SCIENCE↗

Development of Kinetic Model for Reactions Between Cu-Containing Multicomponent Slag and Liquid Sulfide Using Coupled Reaction Model

Copper smelting slag contains less than 2 mass pct of Cu oxide and 30–50 mass pct of Fe{sub x}O. Each year, the grade of copper ore decreases, while the amount of slag generated in the copper smelting process increases. In this study, a coupled reaction model to simulate the reaction between multicomponent slag and FeS-based matte was developed using reported thermodynamic data and double-film theory for the recycling of copper smelting slag. The activity coefficients of oxides in the multicomponent slag were calculated using a regular solution. The activity coefficients of Cu{sub 2}O in the slag and those of FeS, Cu{sub 2}S, and CaS in the FeS-based matte used previously reported data. The behaviors of Cu in slag and matte were confirmed by comparing the simulated results and the reported solubility of Cu in the slag in the temperatures ranging from 1473 K to 1573 K. In addition, the effect of the input amount of FeS on the copper content of the slag was verified by comparing the results of reaction model to experimental results. Using the reaction model, the influences of the initial ratio of FeO/SiO{sub 2} of the slag, temperature, and matte composition on the behaviors of Cu in the slag and matte were investigated.

36 MATERIALS SCIENCE↗