Search NASA⌕ Search

SEARCH · Search NASA

Results for “CHARTS - STRESSES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29
All sourcesNASA NTRSDOE OSTI
NASA NTRS2016

Check Calibration of the NASA Glenn 10- by 10-Foot Supersonic Wind Tunnel (2014 Test Entry)

A check calibration of the 10- by 10-Foot Supersonic Wind Tunnel (SWT) was conducted in May/June 2014 using an array of five supersonic wedge probes to verify the 1999 Calibration. This check calibration was necessary following a control systems upgrade and an integrated systems test (IST). This check calibration was required to verify the tunnel flow quality was unchanged by the control systems upgrade prior to the next test customer beginning their test entry. The previous check calibration of the tunnel occurred in 2007, prior to the Mars Science Laboratory test program. Secondary objectives of this test entry included the validation of the new Cobra data acquisition system (DAS) against the current Escort DAS and the creation of statistical process control (SPC) charts through the collection of series of repeated test points at certain predetermined tunnel parameters. The SPC charts secondary objective was not completed due to schedule constraints. It is hoped that this effort will be readdressed and completed in the near future.

pressure measurement↗
NASA NTRS2017

Tidal Prediction

Tides are the most predictable of oceanographic phenomena, due both to the simplicity and predictability of the astronomical forcing and to the near linearity of the ocean's dynamical response. In the classical and simplest scenario, tidal prediction is based on harmonic analysis of past measurements at a fixed location. Limits to predictability arise because isolated astronomical spectral lines are broadened into "cusps" of incoherent energy, for example through interactions with non-tidal flows. Tidal prediction at locations without past measurements has historically been a major challenge, but, owing to near-global observations of modern satellite altimeters, the empirical harmonic approach now yields reasonably accurate predictions throughout most of the open ocean. Advances in numerical modeling and data assimilation allow these predictions to be refined (especially in shallow seas where observations remain insufficient to directly constrain tidal wave structure) and extended to include tidal currents. We review recent progress in the development of global and regional-scale tidal prediction capabilities, summarize accuracy of available charts, and briefly consider outstanding issues. Satellite altimetry has also helped unravel the global tidal energy budget and has clarified the role of internal tides as a sink of tidal energy. We summarize these results, and then turn to the challenging problem of predicting internal tides. To the extent that low modes remain coherent with the surface tide, elevations can be directly mapped. We review current efforts in this direction, which are already producing charts with predictive capability. However, internal tides (especially higher modes) interact much more strongly with lower-frequency ocean flows, so a significant fraction of this tidal signal is intermittent and incoherent. We close with a brief review of ongoing efforts to model global tides in combination with wind-forced ocean motions.

Harmonic Constants↗
NASA NTRS2019

Benefits and Challenges of Model-based Software Engineering: Lessons Learned based on Qualitative and Quantitative Findings

Even though Model-based Software Engineering (MBSwE) techniques and Autogenerated Code (AGC) have been increasingly used to produce complex software systems, there is only anecdotal knowledge about the state-of-thepractice. Furthermore, there is a lack of empirical studies that explore the potential quality improvements due to the use of these techniques. This paper presents in-depth qualitative findings about development and Software Assurance (SWA) practices and detailed quantitative analysis of software bug reports of a NASA mission that used MBSwE and AGC. The mission’s flight software is a combination of handwritten code and AGC developed by two different approaches: one based on state chart models (AGC-M) and another on specification dictionaries (AGC-D). The empirical analysis of fault proneness is based on 380 closed bug reports created by software developers. Our main findings include: (1) MBSwE and AGC provide some benefits, but also impose challenges. (2) SWA done only at a model level is not sufficient. AGC code should also be tested and the models and AGC should always be kept in-sync. AGC must not be changed manually. (3) Fixes made to address an individual bug report were spread both across multiple modules and across multiple files. On average, for each bug report 1.4 modules, that is, 3.4 files were fixed. (4) Most bug reports led to changes in more than one type of file. The majority of changes to auto-generated source code files were made in conjunction to changes in either file with state chart models or XML files derived from dictionaries. (5) For newly developed files, AGC-M and handwritten code were of similar quality, while AGC-D files were the least fault prone.

Goseva-Popstojanova, Katerina↗
NASA NTRSDate not supplied

AAM NC ATI TechTalk - Aerograph Architecture v1

Aerograph is NASA’s data management system for Advanced Air Mobility. Its mission is to support AAM research by providing a reliable and secure system that collects, stores, protects, and shares AAM data. Its vision is to provide a system that AAM research scientists, aerospace engineers, data scientists, and analysts trust for obtaining NC data and performing key analyses. The types of data Aerograph manages involves data related to flight test events, including: Aircraft Performance and Characterization (e.g., position reports) Airspace (e.g., operation intent, waypoints, and constraints) Environment (e.g., surface and wind weather) Infrastructure (e.g., surveillance coverage) Derivative Analytical Artifacts (e.g., glide path performance chart, 3D position chart, Integrated Data Product)

Aerograph↗
NASA NTRSDate not supplied

Statistical Process Control and Analysis on the Water Content Measurements in NASA Glenn’s Icing Research Tunnel

The Icing Research Tunnel at NASA Glenn follows the recommended practice for calibration outlined in SAE’s ARP5905. The calibration team has followed the schedule of a full calibration every five years with a check calibration done every six months following. The liquid water content of the IRT has maintained stability within the stated specifications of variation within +/- 10% of the curve fit equation generated from calibration data. Using past measurements and data trends, IRT characterization engineers wanted to develop methods for the ability to know when data were not within variation. Trends can be observed in the liquid water content measurement process by constructing statistical process control charts. This paper describes data processing procedures for the Multi-Element Sensor in the IRT, including collision efficiency corrections, canonical correlation analysis, process for rejection of data, and construction of control charts. Data are presented to display the control capability to meet defined liquid water content specifications of the IRT with the Multi-Element Sensor mounted in the center of the test section.

Statistical Process Control↗
NASA NTRSDate not supplied

Statistical Process Control and Analysis on the Water Content Measurements in NASA Glenn’s Icing Research Tunnel

The Icing Research Tunnel at NASA Glenn follows the recommended practice for calibration outlined in SAE’s ARP5905. The calibration team has followed the schedule of a full calibration every five years with a check calibration done every six months following. The liquid water content of the IRT has maintained stability within the stated specifications of variation within +/- 10% of the curve fit equation generated from calibration data. Using past measurements and data trends, IRT characterization engineers wanted to develop methods for the ability to know when data were not within variation. Trends can be observed in the liquid water content measurement process by constructing statistical process control charts. This paper describes data processing procedures for the Multi-Element Sensor in the IRT, including collision efficiency corrections, canonical correlation analysis, process for rejection of data, and construction of control charts. Data are presented to display the control capability to meet defined liquid water content specifications of the IRT with the Multi-Element Sensor mounted in the center of the test section.

Statistical Process Control↗
NASA NTRSDate not supplied

NASA Science Mission Directorate Overview for CLD Utilization Forum

This presentation is a set of charts presented at the CLD Utilization Forum for Science Mission Directorate External Payloads. These charts provide an overview of SMD Science themes and organization, description of SMD Science, ISS and other hosted payload opportunities, and future demand of SMD External Payloads on CLDs. This presentation was presented and recorded on Aug 17, 2023 at the CLD Utilization Forum.

CLD↗
NASA NTRSDate not supplied

LEARNing from Experiences, Achievements, and Resolution Navigation

This presentation is a set of charts presented at the 2024 Government SmallSat Forum. These charts provide overview of how NASA coordinates on the area of SmallSats and CubeSat missions, specifically targeting LEARN Forum as one of the focus area of emphasis.

SmallSats↗
NASA NTRS1956

Aerodynamic Design of Axial-flow Compressors. Volume III

Chapters XI to XIII concern the unsteady compressor operation arising when compressor blade elements stall. The fields of compressor stall and surge are reviewed in Chapters XI and XII, respectively. The part-speed operating problem in high-pressure-ratio multistage axial-flow compressors is analyzed in Chapter XIII. Chapter XIV summarizes design methods and theories that extend beyond the simplified two-dimensional approach used previously in the report. Chapter XV extends this three-dimensional treatment by summarizing the literature on secondary flows and boundary layer effects. Charts for determining the effects of errors in design parameters and experimental measurements on compressor performance are given in Chapters XVI. Chapter XVII reviews existing literature on compressor and turbine matching techniques.

COMPRESSORS - PRESSURE RATIO↗
NASA NTRS1945

Data for Design of Entrance Vanes from Two-Dimensional Tests of Airfoils in Cascade

As a part of a program of the NACA directed toward increasing the efficiency of compressors and turbines, data were obtained for application to the design of entrance vanes for axfax-flow compressors or turbines. A series of blower-blade sections with relatively high critical speeds have been developed for turning air efficiently from 0 deg to 80 deg starting with an axial direction. Tests were made of five NACA 65-series blower blades (modified NACA 65(216)-010 airfoils) and of four experimentally designed blower blades in a stationary cascade at low Mach numbers. The turning effectiveness and the pressure distributions of these blade sections at various angles of attack were evaluated over a range of solidities near 1. Entrance-vane design charts are presented that give a blade section and angle of attack for any desired turning angle. The blades thus obtained operate with peak-free pressure distributions. Approximate critical Mach numbers were calculated from the pressure distributions.

FLOW-VANES, GUIDE↗
NASA NTRS2021

A Semi-Empirical Scheme for Bathymetric Mapping in Shallow Water by ICESat-2 and Sentinel-2: A Case Study in the South China Sea

To derive shallow water bathymetry for coastal areas, a common approach is to deploy a scanning airborne bathymetric light detection and ranging (LiDAR) system or a shipborne echosounder for ground surveys. However, recent advancements in satellite remote sensing, including the Ice, Cloud and land Elevation Satellite-2 (ICESat-2) offer new tools for generating satellite derived bathymetry (SDB). The key payload onboard ICESat-2 is the Advanced Topographic Laser Altimeter System (ATLAS), a micro-pulse, photon-counting LiDAR system, simultaneously emitting six separate 532 nm beams at 10 kHz pulse rate. However, despite its high resolution, the major limitation for bathymetry is that ICESat-2 only provides along-track height profiles, leaving observation gaps between the parallel ground tracks. Merging ICESat-2 observations with optical multispectral imagery, as demonstrated herein, provides an effective solution for deriving a full scene of water depth in light of the spectral attenuation behavior. This study aims to combine ICESat-2 and Sentinel-2 optical data to derive shallow water bathymetry (depth <20 m) at six islands and reefs in the South China Sea. ICESat-2 ATL03 point clouds of georeferenced photons are first filtered to determine the seafloor elevation along the ground track. Results indicate a root-mean-square error (RMSE) of 0.26–0.61 m as compared with independent observations from an airborne LiDAR campaign. Next, three semi-empirical functions, namely the Modified Linear/Polynomial/Exponential Ratio Models with its kernel formed by the log ratio between Sentinel-2′s green and blue bands, are used to fit the spectral data with ICESat-2 height profiles. After water depth mapping using the trained model, independent ICESat-2 point clouds are used to validate the Sentinel-2 derived bathymetry. The RMSE values of the three models using the weighted average of multiple images for these six islands are within 0.50–0.90 m in 0–15 m deep. We also demonstrate that a synthesis of satellite laser altimetry and optical remote sensing can produce SDB results that potentially meet the requirement of category C in Zones of Confidence (ZOC) of the Electronic Navigational Chart (ENC) in 0–8 m deep. It is foreseen that ICESat-2 will be a helpful tool for mapping coastal and shallow waters around the world especially where bathymetric data are unavailable.

Coastal Bathymetry↗
NASA NTRS1962

Paraglider Recovery Systems

In 1945 it occurred to the writer that if we could discover how to make flexible wings that could be packaged and deployed somewhat like a parachute, such wings would have many new applications as well as replacing some parachutes and rigid wings. Previous uses of flexible materials in aerodynamic surfaces - parachutes, kites, boat sails, and wind mills - were reviewed, and some crude experiments were performed with gliders and kites. Before the end of 1948, the device now generally called a paraglider was evolved and developed sufficiently to merit a patent application. The study was continued privately as time permitted, and in 1954 a short paper on the subject was presented to an audience of about 50 Reserve Air Force officers. This paper was given rather wide distribution, although it suffers from lack of the many kite and glider demonstrations of the original presentation. Little serious interest was shown by the aeronautical community, however, until about a year after Sputnik I. In December 1958 the flexible-wing concept was presented to the Langley Committee on General Aerodynamics with the aid of the hurriedly prepared charts shown in figure 1, faithfully reproduced here for historical purposes.

Flexible wing↗
NASA NTRS1961

LUNAR REFERENCE COORDINATES

Two nonconflicting conventions defined for lunar and planetary reference coordinates - astronomical versus astronautical maps and charts

ASTRONOMICAL MAP↗