Search NASA⌕ Search

SEARCH · Search NASA

Results for “Canopy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29

Remote detection of canopy water stress in coniferous forests using the NS001 Thematic Mapper Simulator and the thermal infrared multispectral scanner

Water stress was induced in two coniferous forest stands in West Germany by severing tree sapwood. Leaf water potential, Psi(L), measurements indicated that maximum, naturally occurring levels of water stress developed in the stressed plots while control plots exhibited natural diurnal trends. Images of each site were obtained with the Thematic Mapper Simulator (NS001) and the Thermal Infrared Multispectral Scanner (TIMS) 12 to 15 days after stress induction. NS001 bands 2 to 6, NS001 indices combining bands 4 and 6, and NS001 and TIMS thermal bands showed significant radiance differences between stressed and control plots when large differences in Psi(L) and relative water content (RWC) existed during the morning overflights at Munich. However, the NS001 and TIMS sensors could not detect the slightly smaller differences in Psi(L) and RWC during the Munich afternoon and Frankfurt overflights. The results suggest that routine detection of canopy water stress under operational conditions is difficult utilizing current sensor technology.

Pierce, Lars L.↗

Documentation for Program SOILSIM: A computer program for the simulation of heat and moisture flow in soils and between soils, canopy and atmosphere

SOILSIM, a digital model of energy and moisture fluxes in the soil and above the soil surface, is presented. It simulates the time evolution of soil temperature and moisture, temperature of the soil surface and plant canopy the above surface, and the fluxes of sensible and latent heat into the atmosphere in response to surface weather conditions. The model is driven by simple weather observations including wind speed, air temperature, air humidity, and incident radiation. The model intended to be useful in conjunction with remotely sensed information of the land surface state, such as surface brightness temperature and soil moisture, for computing wide area evapotranspiration.

Field, Richard T.↗

Comparison of theoretical and measured brightness temperature of a soybean canopy

A model for the brightness temperature of a canopy which is based on the physical characteristics of the vegetation is being developed. This model uses the Peake model to relate the scattering coefficient of the vegetation to its radiometric brightness temperature and a discrete scattering model to computer the scattering coefficient. A distorted Born approximation is used to provide a tractable solution to the scattering problem. To verify the theory a comparison has been made with experiments. Radiometric measurements of brightness temperature were made at L- and C-bands over a crop of mature soybeans, along with ground truth measurements. All model input parameters were measured; there were no free parameters to adjust to obtain agreement with the measurements. Results showed that agreement between theory and measurements was reasonable for horizontal polarization at both L- and C-bands with dry underlying soil.

Lang, R. H.↗

A simplified formulation of photon transport in leaf canopies with scatterers of finite dimensions

A formalism for photon transport in leaf canopies with finite-dimensional scattering centers that mutually cross-shade was recently proposed resulting in an equation set which is rather complicated. In this paper, we propose a simplification of the correction factors that describe the correlation in photon fates. These simplified correction factors permit the derivation of a modified integro-differential transfer equation with two additional terms that arise from considerations of finite size scatterers. A numerical procedure for the solution of this transfer equation in the framework of a successive collisions approach is also presented.

Myneni, Ranga B.↗

Vegetation Canopies and Objects of Arbitrary Shapes: Computer Generation and Bidirectional Reflectance Calculations

A general computer graphics based model is presented for computer generation of objects of arbitrary shape and for calculating Bidirectional Reflectance Factor (BRF) and scattering from them, in the optical region. The computer generation uses a modified Lindemayer system (L system) approach. For rendering on a computer screen, the object is divided into polygons, and innovative computer graphics techniques are used to display the object and to calculate the scattering and reflectance from the object. The use of the technique is illustrated with scattering from canopies of simulated corn plants and from a snow covered mountain. The scattering is quantified using measures like BRF and albedo and by rendering the objects with brightness of each of the two facets of a polygon proportional to the amount of light scattered from the object in the viewer's direction.

Goel, Narenda S.↗

Field testing of thermal canopy models in a spruce-fir forest

Recent advances in remote sensing technology allow the use of the thermal infrared region to gain information about vegetative surfaces. Extending existing models to account for thermal radiance transfers within rough forest canopies is of paramount importance. This is so since all processes of interest in the physical climate system and biogeochemical cycles are thermally mediated. Model validation experiments were conducted at a well established boreal forest; northern hardwood forest ecotone research site located in central Maine. Data was collected to allow spatial and temporal validation of thermal models. Emphasis was placed primarily upon enhancing submodels of stomatal behavior, and secondarily upon enhancing boundary layer resistance submodels and accounting for thermal storage in soil and vegetation.

Source record↗

Relating the temporal change observed by AIRSAR to surface and canopy properties of mixed conifer and hardwood forests of northern Michigan

The mixed hardwood and conifer forests of northern Michigan were overflown by a 3-frequency airborne imaging radar in Apr. and Jul. 1990. A set of 10 x 10 km test sites near the University of Michigan Biological Station at Douglas Lake and within the Hiawatha National Forest in the upper peninsula of Michigan contained training stands representing the various forest species typical of forest communities across the ecotone between the coniferous boreal forest and mid-latitude hardwood and coniferous forests. The polarimetric radar data were externally calibrated to allow interdate comparisons. The Apr. flight was prior to bud-break of deciduous species and patchy snowcover was present. The Jul. flights occurred during and 2 days after heavy rain showers, and provide a unique opportunity to examine the differences in radar backscatter attributable to intercepted precipitation. Analyses show that there are significant changes in backscattering between biophysically dissimilar forest stands on any given date and also between dates for a given forest stand. These differences in backscattering can be related to moisture properties of the forest floor and the overlying canopy and also to the quantity and organizational structure of the above-ground biomass.

Dobson, M. Craig↗

Transient water stress in a vegetation canopy - Simulations and measurements

Consideration is given to observational and modeling evidence of transient water stress, the effects of the transpiration plateau on the canopy radiometric temperature, and the factors responsible for the onset of the transpiration plateau, such as soil moisture. Attention is also given to the point at which the transient stress can be detected by remote measurement of surface temperature.

Carlson, Toby N.↗

The F(N) method for the one-angle radiative transfer equation applied to plant canopies

The paper presents a semianalytical solution method, called the F(N) method, for the one-angle radiative transfer equation in slab geometry. The F(N) method is based on two integral equations specifying the intensities exiting the boundaries of the vegetation canopy; the solution is obtained through an expansion in a set of basis functions with expansion coefficients to be determined. The advantage of this method is that it avoids spatial truncation error entirely because it requires discretization only in the angular variable.

Ganapol, B. D.↗

Geometric-optical bidirectional reflectance modeling of the discrete crown vegetation canopy - Effect of crown shape and mutual shadowing

Many natural vegetation covers can be regarded as assemblages of plant crowns, on a background, which interact with light as discrete objects. On this basis, geometric optics furnish an approach to the modeling of vegetation canopies that captures the most important features of such growths' bidirectional measurements. Attention is presently given to models which approximate these phenomena and relate the size, shape, and count density of plant crowns to viewing and illumination positions and to crown-background reflectance contrasts.

Li, Xiaowen↗

Estimation of surface heat and moisture fluxes over a prairie grassland. IV - Impact of satellite remote sensing of slow canopy variables on performance of a hybrid biosphere model

Numerical experiments are conducted using the Ex-BATS model of Crosson and Weng (1993), which is an adaptation the Dickinson (1983, 1984) and Dickinson et al. (1986) biosphere model BATS. The purpose of these experiments is the assessment of the Ex-BATS performance when using remotely sensed data for the estimation of three key canopy variables retrieved from NOAA-AVHRR measurements: the total surface albedo, the leaf area index (LAI), and the nondiurnally varying component of stomatal resistance, r(s). The results of the simulations, which cover the entire FIFE 1987 time period, show that the satellite retrievals of r(s) are only 20 to 30 percent less accurate than the idealized results of the control experiment. The performance of the model which used satellite retrieval of the surface albedo and LAI was essentially equivalent to the hypothetical version.

Crosson, William L.↗

An alternative representation of the ice canopy for calculating microwave brightness temperatures over a thunderstorm

Passive microwave brightness temperatures (TBs) at 92 and 183 GHz from an aircraft thunderstorm overflight are compared with values calculated from radar-derived hydrometeor profiles and a modified proximity sounding. Two methods for modeling particles in the ice canopy are contrasted. The first is a 'traditional' approach employing Marshall-Palmer ice spheres. The second, or 'alternative', method partitions 20 percent of the ice water content into a Marshall-Palmer component for graupel and hail, and 80 percent into a modified gamma spherical particle size distribution function representing ice crystals. Results from the alternative approach are superior to those from the traditional method in the anvil and mature convective core. In the decaying convective region, the traditional approach yields better agreement with observed magnitudes. Neither method, however, matches the geometry of the observed TB depression associated with the decaying convective core. This is likely due to the presence of graupel, which is not detected as a special signature in radar reflectivity, but does diminish TBs through scattering. Brightness temperatures at the relatively high microwave frequencies considered are shown to be very sensitive to the ice-particle size distribution.

Muller, Bradley M.↗

Inferring total canopy APAR from PAR bidirectional reflectances and vegetation indices in tallgrass prairie

The fraction of photosynthetically active radiation (PAR) absorbed by a vegetated canopy (APARc) or landscape (APARs) is a critical parameter in climate processes. A grassland study examined: 1) whether APARs can be estimated from PAR bidirectional exitance fractions; and 2) whether APARs is correlated with spectral vegetation indices (SVIs). Data were acquired with a high resolution continuous spectroradiometer at 4 sun angles on grassland sites. APARs was computed from the scattered surface PAR exitance fractions. The nadir APARs value was the most variable diurnally; it provided a good estimate of the average surface APARs at ~95 percent. APARc was best represented by exitance factors between 30-60* forward.

Middleton, Elizabeth M.↗

Using AVIRIS images to measure temporal trends in abundance of photosynthetic and nonphotosynthetic canopy components

The Jasper Ridge Biological Preserve, Stanford, California is a good example of hardwood rangeland ecosystems in California. Structurally, it is composed of a mosaic of serpentine grasslands, oak savannah, coastal chaparral, and mixed evergreen woodland, representing a broad cross-section of physiognomic classes. The Mediterranean climate produces an extended seasonal drought lasting throughout most of the growing season and has significant impact on the expression of divergent phenological patterns related to contrasting ecological strategies of these taxa. The region is well understood biologically due to the rich history of ecological research at the site. Thus, community characteristics, physiological characteristics, phenology, and temporal dynamics are reasonably well understood for many of the dominant species. Because of its proximity to NASA Ames Research Center, it has been subject to a large number of aircraft data acquisitions over many years. A more complete examination of this database would provide an opportunity to test current remote sensing hypotheses for measurement and detection of ecological attributes, particularly those involving canopy chemistry and physiology. Better definition of ecological rules might permit development of remotely sensed surrogate variables for biological properties that cannot be directly measured or measured with sufficient accuracy.

Ustin, Susan L.↗

Canopy reflectance modelling of semiarid vegetation

Three different types of remote sensing algorithms for estimating vegetation amount and other land surface biophysical parameters were tested for semiarid environments. These included statistical linear models, the Li-Strahler geometric-optical canopy model, and linear spectral mixture analysis. The two study areas were the National Science Foundation's Jornada Long Term Ecological Research site near Las Cruces, NM, in the northern Chihuahuan desert, and the HAPEX-Sahel site near Niamey, Niger, in West Africa, comprising semiarid rangeland and subtropical crop land. The statistical approach (simple and multiple regression) resulted in high correlations between SPOT satellite spectral reflectance and shrub and grass cover, although these correlations varied with the spatial scale of aggregation of the measurements. The Li-Strahler model produced estimated of shrub size and density for both study sites with large standard errors. In the Jornada, the estimates were accurate enough to be useful for characterizing structural differences among three shrub strata. In Niger, the range of shrub cover and size in short-fallow shrublands is so low that the necessity of spatially distributed estimation of shrub size and density is questionable. Spectral mixture analysis of multiscale, multitemporal, multispectral radiometer data and imagery for Niger showed a positive relationship between fractions of spectral endmembers and surface parameters of interest including soil cover, vegetation cover, and leaf area index.

Franklin, Janet↗

Studies of microwave scattering and canopy architecture for boreal forests

This is an annual report on the project titled 'Study of Microwave Scattering and Canopy Architecture for Boreal Forests.' The objectives of our work are to study the interaction of microwave signals with vegetation components and to determine the radar's ability to provide accurate estimates of biophysical parameters such as biomass. Our research is aimed at refining the current microwave models and using these improvements to facilitate more accurate interpretations of SAR (synthetic aperture radar) imagery.

Lockhart, G. Lance↗

High spectral resolution remote sensing of canopy chemistry

Near infrared laboratory spectra have been used for many years to determine nitrogen and lignin concentrations in plant materials. In recent years, similar high spectral resolution visible and infrared data have been available via airborne remote sensing instruments. Using data from NASA's Airborne visible/Infrared Imaging Spectrometer (AVIRIS) we attempt to identify spectral regions correlated with foliar chemistry at the canopy level in temperate forests.

Aber, John D.↗

Estimation of penetration of forest canopies by Interferometric SAR measurements

In contrast to traditional Synthetic Aperture Radar (SAR), an Interferometric SAR (INSAR) yields two additional measurements: the phase difference and the correlation between the two interferometric channels. The phase difference has been used to estimate topographic height. For homogeneous surfaces, the correlation depends on the system signal-to-noise (SNR) ratio, the interferometer parameters, and the local slope. In the presence of volume scattering, such as that encountered in vegetation canopies, the correlation between the two channels is also dependent on the degree of penetration of the radiation into the scattering medium. In this paper, we propose a method for removing system and slope effects in order to obtain the decorrelation due to penetration alone. The sensitivities and accuracy of the proposed method are determined by Monte Carlo experiments, and we show that the proposed technique has sufficient sensitivity to provide penetration measurements for airborne SAR systems. Next, we provide a theoretical model to estimate the degree of penetration in a way which is independent of the details of the scattering medium. We also present a model for the correlation from non-homogeneous layers. We assess the sensitivity of the proposed inversion technique to these inhomogeneous situations. Finally, we present a comparison of the interferometric results against in situ data obtained by an airborne laser profilometer which provides a direct measurement of tree height and an estimate of the vegetation density profile in the forested areas around Mt. Adams, WA.

Rodriguez, Ernesto↗