Search NASA⌕ Search

SEARCH · Search NASA

Results for “Capacity degradation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Dual Protective Mechanism of AlPO 4 Coating on High-Nickel Cathode Material for High Energy Density and Long Cycle Life Lithium-Ion Batteries

Cathode material with high nickel content is a promising candidate for the future generation of Li-ion batteries (LIBs). However, severe structural degradation during cycling limits its practical use, especially for electric vehicles. Herein, AlPO 4 nanoparticles were synthesized and then coated onto the surface of a high-nickel layer-structured cathode via a dry coating method. The AlPO 4 nanoparticles coating significantly improved the cycling stability from 69.2% to over 80% capacity retention after 140 cycles. Furthermore, the structure and chemical composition of the AlPO 4 -coated cathode was investigated by XRD, SEM, XPS, and STEM. Compared with the non-coated cathode, we revealed a dual protective mechanism for enhanced cycling stability, where Al doping and Li 3 PO 4 coating play synergistic roles in protecting cathode material through long-term cycling. This work demonstrates a facile and environmentally friendly approach toward improving the performance of high-nickel LIB cathodes, which can be easily scaled up for industrial applications.

25 ENERGY STORAGE↗
DOE OSTI2023

Control of Cement Timing, Mineralogy, and Texture on Hydro-chemo-mechanical Coupling from CO2 Injection into Sandstone: A Synthesis

Carbon capture, utilization, and storage (CCUS) has been widely applied to enhance oil recovery (CO2-EOR). A thorough investigation of the impact of injecting CO2 into a heterogeneous reservoir is critical to understanding the overall reservoir robustness and storage performance. We conducted fifteen flow-through tests on Morrow B sandstone that allowed for chemical reactions between a CO2-rich brackish solution and the sandstones, and four creep/flow-through tests that simultaneously allowed for chemical reactions and stress monitoring. From fluid chemistry and X-ray computed tomography, we found that the dissolution of disseminated cements and the precipitation of iron-rich clays did not significantly affect the permeability and geomechanical properties. Minor changes in mechanical properties from Brazilian and creep tests indicated that the matrix structure was well-supported by early diagenetic quartz overgrowth cement and the reservoir’s compaction history at deep burial depths. However, one sample experienced a dissolution of poikilotopic calcite, leading to a permeability increase and significant tensile strength degradation due to pore opening, which overcame the effect of the early diagenetic cements. We concluded that the Morrow B sandstone reservoir is robust for CO2 injection. Most importantly, cement timing, the abundance and texture of reactive minerals, and the reservoir’s burial history are critical in predicting reservoir robustness and storage capacity for CO2 injection.

Wu, Zhidi (ORCID:0000000338869492)↗
DOE OSTI2022

Functional succession of actively growing soil microorganisms during rewetting is shaped by precipitation history

Rewetting of seasonally dry soils induces a burst of microbial activity and carbon mineralization that changes nutrient availability and leads to succession. Yet the microbial functions that underpin this succession are not well described. Further, it’s unclear how previous precipitation frames microbial capacities after rewetting and how long these effects persist. We used isotopically-labeled water to rewet seasonally dry annual grassland soil that experienced either mean annual or reduced precipitation during the previous two years, and sampled at five subsequent time points. We used quantitative stable isotope probing (qSIP)-informed genome- resolved metagenomics to identify growing microorganisms, predict their capabilities, and analyze how these traits differed over time and between precipitation treatments. Organisms that grew after wetup were more abundant than non-growing organisms prior to the wet-up, suggesting that traits that initiate succession are pre-defined at the end of the prior plant growing season or via survival over the summer. Fast-growing organisms had fewer carbohydrate active enzyme (CAZy) genes per genome than slower-growing organisms, suggesting that although fast-growers were capable of degrading complex C, they may not specialize in this process. Differential abundance of CAZy genes in growing organisms throughout the succession implies that substrate availability varied with time. In contrast, the abundance of peptidases in growing organisms differed between precipitation treatments, but not over time following wet-up. Before wet-up, the soil organisms’ gene inventories were different between the two precipitation treatments. Surprisingly, this legacy effect waned after just one week. Thus, pre-wetup differences in microbial functional capacity converged shortly after rewetting.

Sieradzki, E T↗
DOE OSTI2023

Multifunctional Coatings on Sulfide‐Based Solid Electrolyte Powders with Enhanced Processability, Stability, and Performance for Solid‐State Batteries

Abstract Sulfide‐based solid‐state electrolytes (SSEs) exhibit many tantalizing properties including high ionic conductivity and favorable mechanical properties for next‐generation solid‐state batteries. Widespread adoption of these materials is hindered by their intrinsic instability under ambient conditions, which makes them difficult to process at scale, and instability at the Li||SSE and cathode||SSE interfaces, which limits cell performance and lifetime. Atomic layer deposition is leveraged to grow thin Al 2 O 3 coatings on Li 6 PS 5 Cl powders to address both issues simultaneously. These coatings can be directly grown onto Li 6 PS 5 Cl particles with negligible chemical modification of the underlying material and enable exposure of powders to pure and H 2 O‐saturated oxygen environments for ≥4 h with minimal reactivity, compared with significant degradation of the uncoated powder. Pellets fabricated from coated powders exhibit ionic conductivities up to 2× higher than those made from uncoated material, with a simultaneous decrease in electronic conductivity and significant suppression of chemical reactivity at the Li‐SSE interface. These benefits result in significantly improved room temperature cycle life at high capacity and current density. It is hypothesized that this enhanced performance derives from improved intergranular properties and improved Li metal adhesion. This work points to a completely new framework for designing active, stable, and scalable materials for next‐generation solid‐state batteries.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Toward Stable, High‐Energy, Partially Disordered Mn‐Rich Spinel Cathodes by Revealing and Mitigating Surface Degradation

Mn-rich cathodes balance performance and sustainability but suffer from limited cyclability due to Mn dissolution and cathode-to-anode crosstalk. The Jahn-Teller (J-T) effect of Mn 3+ is often linked to the above phenomena, such as in spinel LiMn 2 O 4 . However, in typical voltage ranges, significant Mn 3+ only appears near the end of discharge, highlighting the need to reassess its role in driving Mn dissolution, structural degradation, and battery performance. Here, the spinel cathode's degree of disorder is tailored to expand the Mn redox range, enabling segmentation into J-T active and less active voltage ranges. Cycling at segmented voltage windows reveals surface degradation mechanisms with and without the major J-T effect. Despite a stronger J-T effect below 3.6 V vs. Li/Li + , Mn dissolution is less significant than above 3.6 V. Expanding the cycling window to 2.0–4.3 V causes severe degradation as the J-T active range induces a tetragonal phase and Mn 2+ -rich surface, driving Mn dissolution and consuming Li-ion inventory in full cells. Reducing electrolyte acidity minimizes Mn 3+ disproportionation, enabling a stable dopant-free Mn-only cathode with a 250 mAh g −1 specific capacity. These findings demonstrate that full cells using Mn-rich cathodes have the potential to avoid the notorious crosstalk problem through electrolyte engineering.

25 ENERGY STORAGE↗
DOE OSTI2020

Standard Characterization Techniques for Inorganic Phase Change Materials

Salt hydrates are promising candidates for phase change materials (PCMs) because of their low cost and high energy storage capacity. However, practical applications of salt hydrate based PCMs are limited due to their poor thermal cycling performance caused by phase separation and supercooling. Various techniques, including differential scanning calorimetry (DSC) and transient plane source (TPS) have been used to characterize salt hydrate based PCMs but may not provide full understanding of the degradation mechanism. In this manuscript, salt hydrate and graphite composites are prepared. Temperature history (T-History) method and X-ray diffraction (XRD) are utilized for measuring melting temperature, energy storage, and latent heat degradation of the PCM composites. Highlighting the importance of each technique and how each technique plays an important role in analyzing salt hydrates performance accurately. Temperature history, and X-ray diffraction are also used in conjunction to precisely predict the cause of degradation in salt hydrate PCMs with thermal cycling, as in most literatures the cause of degradation in salt hydrate are attributed to phase segregation, supercooling, and change in stichometry water concentration without any scientific validation.

Kumar, Navin↗
DOE OSTI2023

Reduced global plant respiration due to the acclimation of leaf dark respiration coupled with photosynthesis

Summary Leaf dark respiration ( R d ) acclimates to environmental changes. However, the magnitude, controls and time scales of acclimation remain unclear and are inconsistently treated in ecosystem models. We hypothesized that R d and Rubisco carboxylation capacity ( V cmax ) at 25°C ( R d,25 , V cmax,25 ) are coordinated so that R d,25 variations support V cmax,25 at a level allowing full light use, with V cmax,25 reflecting daytime conditions (for photosynthesis), and R d,25 / V cmax,25 reflecting night‐time conditions (for starch degradation and sucrose export). We tested this hypothesis temporally using a 5‐yr warming experiment, and spatially using an extensive field‐measurement data set. We compared the results to three published alternatives: R d,25 declines linearly with daily average prior temperature; R d at average prior night temperatures tends towards a constant value; and R d,25 / V cmax,25 is constant. Our hypothesis accounted for more variation in observed R d,25 over time ( R 2 = 0.74) and space ( R 2 = 0.68) than the alternatives. Night‐time temperature dominated the seasonal time‐course of R d , with an apparent response time scale of c. 2 wk. V cmax dominated the spatial patterns. Our acclimation hypothesis results in a smaller increase in global R d in response to rising CO 2 and warming than is projected by the two of three alternative hypotheses, and by current models.

Plant Sciences↗
DOE OSTI2020

Rate-Dependent Aging Resulting from Fast Charging of Li-Ion Cells

The mass electrification of personal and service vehicles is reliant on the ability of battery packs to undergo extreme fast recharging. A central challenge is that the repeated exposure to high currents can trigger and/or accelerate mechanisms of performance degradation, such as lithium deposition, mechanical damage of active material particles, and impedance rise. Here, we investigate whether constraining high-rate charging to limited state-of-charge (SOC) ranges can mitigate these aging processes. Our experiments map the boundaries of lithium plating conditions, and also indicate that permanent losses of electrode capacity appear to be a function of cycle number, but not charging rate. Interestingly, we show that impedance rise appears to depend on charging rate alone, and not on the amount of charge passed at each cycle. This observation suggests that limiting fast charging to a narrow SOC range would only delay cell aging, but not fully prevent it from happening. We identify oxide-particle cracking as the likely mechanism for this impedance rise, suggesting that particle and electrode design are essential to enable fast charging. The findings of this work can inform the development of fast-charging protocols that are less damaging to cell health.

25 ENERGY STORAGE↗
DOE OSTI2022

Automation of FARM from Alpha Phase to Beta Phase

Integrated energy systems (IES) combine different energy technologies in synergistic ways to achieve a more secure and economical energy supply. The RAVEN-based HYBRID framework and the RAVEN plugin for grid and capacity optimization (HERON) are used to find the optimal installed capacity and the optimal economical dispatch of each component of the IES, by respecting the limits on the production variables and the corresponding rates of variation (explicit constraints). Besides, there are other process variables whose evolution needs to be bounded to avoid damaging the components (e.g., condensers, heat exchangers, steam generators, etc.) or degrading the process efficiency (e.g., electrolysis in the hydrogen production process). To avoid violating these latter limits (implicit constraints), a proof-of-concept HERON validator based on Feasible Actuator Range Modifier (FARM-Alpha) was developed by Argonne National Laboratory in January 2021. This FARM-Alpha validator calculates the evolution of process variables on whom the implicit constraints are placed, and then provides feedback to HERON dispatcher to adjust the power setpoints of three IES components, i.e., Balance of Plant, Secondary Energy Source, and Thermal Energy Storage, so as to meet both the explicit and implicit constraints. FARM-Alpha was designed to assess the performance of FARM as a HERON validator only, i.e., the list of components and implicit operational constraints were hard-coded within the source code. The lack of flexibility of the corresponding software structure does not allow the deployment in production environment. This report describes the development and the implementation of an enhanced version of the FARM-based validator (FARM-Beta), which ensures more flexibility for the end user in modeling multiple IES configurations and scenarios. Several test cases of the power dispatch problem were then selected to demonstrate the capabilities offered by FARM-beta. The test cases illustrate the efficiency of the closed-loop optimization scheme and the capability to calculate set-point trajectories satisfying both explicit and implicit constraints.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2026

Low-Rate Cycling Regeneration Sustains NMC811–Graphite Battery Performance through Extreme Ultrafast Charging

Urban air mobility (UAM) systems, such as electric vertical takeoff and landing (eVTOL) aircraft, require batteries capable of extreme ultrafast charging to support high-frequency operations. Here, in this work, we evaluate the electrochemical stability of NMC811–graphite full cells using a complex mixed-modal protocol designed to simulate the aggressive turnaround demands of UAM missions. We demonstrate that incorporating a periodic low-rate (0.3C) “regeneration” cycle enables cells to maintain 96% capacity retention over 900 cycles, despite repeated exposure to ultrafast pulses. To validate the efficacy of this regeneration mechanism, we performed simplified control experiments comparing continuous 10C charging against a 10C–0.3C interleaved protocol. Advanced characterization reveals that while mechanical particle fracture is pervasive at these rates, the regeneration cycles decelerate the electrochemical degradation by resolving spatially heterogeneous Ni oxidation states and relaxing lithium-ion concentration gradients. These findings provide a vital mechanistic framework for battery operation, proving that restorative charging can effectively delay and mitigate failure in demanding UAM applications.

batteries↗
DOE OSTI2022

Different interfacial reactivity of lithium metal chloride electrolytes with high voltage cathodes determines solid-state battery performance

A deep understanding of the interaction of the surface of cathode materials with solid electrolytes is crucial to design advanced solid-state batteries (SSBs). This is especially true for the new class of lithium metal chloride (Li-M-Cl) solid electrolytes which are receiving rapidly growing attention due to their very high oxidative stability (>4 V) in combination with good ionic conductivity that can enable long cell cycle life. While Li-M-Cl electrolytes typically contain resource-limited metals (M) such as indium or rare earths, work has focused on substituting M with more abundant elements such as zirconium. Via operando resistance measurements using intermittent current interruption we explore the dynamic evolution of the interphase at the surface of Ni-rich NCM85 or NCM111 cathode particles inside a working SSB with three different Li-(M 1 ,M 2 )-Cl catholytes (Li 3 InCl 6 , Li 2 Sc 1/3 In 1/3 Cl 4 and Li 5/2 Y 1/2 Zr 1/2 Cl 6 ) to reveal the impact of the cationic metal substitution on the interfacial chemistry. We show that the metal plays a critical role in determining high voltage stability, contrary to prior assumptions. Using a combination of cyclic voltammetry and ultraviolet photoelectron spectroscopy measurements of the electronic band structure to assess oxidative stability; coupled with DFT calculations and ToF-SIMS to evaluate products formed at the interface at different upper cutoff potentials and degrees of delithiation, we are able to differentiate between electrochemical and chemical degradation. We find that Li 2 Sc 1/3 In 1/3 Cl 4 yields the highest (and Li 3 InCl 6 the lowest) stability against electrochemical oxidation, while Li 5/2 Y 1/2 Zr 1/2 Cl 6 undergoes a detrimental chemical reaction with oxygen released from Ni-rich NCM85 at high potentials, resulting in fast capacity fading. Altogether, our work establishes a platform for the metrics and an approach that can be utilized to efficiently evaluate the stability of new halide SEs in SSB cells.

25 ENERGY STORAGE↗
DOE OSTI2022

High-Mileage Courier Fleet Vehicle Laboratory Battery Pack Testing

For one of each of the AVTA's plug-in hybrid electric vehicles, battery electric vehicles, and some hybrid electric vehicles tested in high-mileage courier fleets, the high-voltage traction battery packs were removed from the vehicle and tested at the beginning and end of fleet testing. For some vehicles, batteries also were tested at periodic intervals during fleet testing. Standard reference performance tests were conducted to characterize battery degradation over time. This dataset contains results from two or more rounds of battery tests for 21 distinct year/make/model vehicles (see reference ["INL Advanced Vehicle Testing Activity: On-road Logger and Laboratory Battery Pack Testing Vehicle List"](https://avt.inl.gov/sites/default/files/pdf/reports/DatasetVehicleList.pdf) for full list of vehicles). Each round of battery testing included the "Static Capacity Test" and the "Hybrid Pulse Power Characterization (HPPC) Test", conducted according to test procedures published in the United States Advanced Battery Consortium ["Battery Test Manual For Power-Assist Hybrid Electric Vehicles"](https://www.uscar.org/commands/files_download.php?files_id=57), ["Battery Test Manual For Plug-In Hybrid Electric Vehicles"](https://www.uscar.org/commands/files_download.php?files_id=168), and ["Electric Vehicle Battery Test Procedures Manual"](https://www.uscar.org/commands/files_download.php?files_id=5) prior to the time of testing. These tests were performed by Intertek Testing Services, North America. (This dataset will be shared by API; a small sample of the vehicle battery and test data has been extracted and is available for download while the API is being developed.)

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2026

High-Mileage Courier Fleet Vehicle Laboratory Battery Pack Testing

For one of each of the AVTA's plug-in hybrid electric vehicles, battery electric vehicles, and some hybrid electric vehicles tested in high-mileage courier fleets, the high-voltage traction battery packs were removed from the vehicle and tested at the beginning and end of fleet testing. For some vehicles, batteries also were tested at periodic intervals during fleet testing. Standard reference performance tests were conducted to characterize battery degradation over time. This dataset contains results from two or more rounds of battery tests for 21 distinct year/make/model vehicles (see reference ["INL Advanced Vehicle Testing Activity: On-road Logger and Laboratory Battery Pack Testing Vehicle List"](https://avt.inl.gov/sites/default/files/pdf/reports/DatasetVehicleList.pdf) for full list of vehicles). Each round of battery testing included the "Static Capacity Test" and the "Hybrid Pulse Power Characterization (HPPC) Test", conducted according to test procedures published in the United States Advanced Battery Consortium ["Battery Test Manual For Power-Assist Hybrid Electric Vehicles"](https://www.uscar.org/commands/files_download.php?files_id=57), ["Battery Test Manual For Plug-In Hybrid Electric Vehicles"](https://www.uscar.org/commands/files_download.php?files_id=168), and ["Electric Vehicle Battery Test Procedures Manual"](https://www.uscar.org/commands/files_download.php?files_id=5) prior to the time of testing. These tests were performed by Intertek Testing Services, North America. This dataset is shared by API; a small sample of the vehicle battery and test data has been extracted and is also available for download.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2026

Hydrogen Production Cost from Proton-Conducting Solid Oxide Electrolysis

Rigorous stakeholder-vetted techno-economic analysis (TEA) was conducted to estimate the cost of hydrogen (H 2 ) production using Proton-Conducting Solid Oxide (PSO) electrolysis. The analysis evaluates Current (2025) and Future (2035) technology cases at centralized plant scales of 50 and 500 metric tonnes per day (MTD), assuming electricity, water, and air as the only system inputs. Untaxed, unsubsidized levelized cost of hydrogen (LCOH) is projected to range from 2020 $\$$1.81 to $\$$2.47/kg H 2 at an electricity price of $\$$0.03/kWh and 97% capacity factor under Nth-of-a-kind (NOAK) deployment assumptions. Total installed capital cost was developed using bottom-up Design for Manufacture and Assembly (DFMA) stack cost modeling and detailed balance-of-plant estimates, including mechanical and electrical subsystems, installation, site preparation, engineering, and contingency. Stack performance assumptions include thermoneutral operation, degradation over time, and periodic replacement. LCOH was calculated using the Hydrogen Analysis (H2A) discounted cash flow model in constant 2020 dollars. Results indicate PSO electrolysis has potential for competitive hydrogen production costs under low-cost electricity and mature manufacturing conditions.

08 HYDROGEN↗
DOE OSTI2022

Bulk Oxygen Stabilization via Electrode–Electrolyte Interphase Tailored Surface Activities of Li–Rich Cathodes

The O3-type Li-rich layered oxides (LLOs) are approaching industrial applications as high-energy cathode materials for Li-ion batteries (LIBs), however, they suffer from rapid performance decay associated with oxygen activities. The interplay between surface and bulk transformations in LLOs, especially the electrochemical behaviors of oxygen anions, remains elusive. Here, by regulating the surface of an O3-type LLO (Li 1.13 Mn 0.517 Ni 0.256 Co 0.097 O 2 ) using an all-fluorinated electrolyte, an enhanced capacity retention from 57.4% to 85.3% and a suppressed voltage decay from 1.34 mV cycle –1 to 0.58 mV cycle –1 within 300 cycles are realized. The performance enhancement is attributed to the thin, uniform, robust, and compact F-rich cathode-electrolyte interphase (CEI), which suppresses various types of oxygen-related surface degradation and, more importantly, stabilizes the bulk oxygen reactions. Finally, through the combined experimental and theoretical studies, this work directly reveals the intriguing association between the surface and bulk oxygen activities and demonstrates that optimizing the interphase is an effective approach for improving the stability of high-energy battery cathodes involving oxygen redox reactions.

25 ENERGY STORAGE↗
DOE OSTI2025

Van de Graaff Irradiation Studies of Oxygen Sensor and Hydrated Zirconia Sorbent

Commercial-scale production of Mo-99 demands a facility-wide assessment of radiation-induced degradation across process equipment, instrumentation, and purification media. Key factors— total ionizing dose, dose rate, radiolysis-driven chemistry, thermal loads, activation, and any neutron-related effects—should inform material selection, shielding, and component layout. Purification materials (sorbents, resins, filters, seals, housing) require particular attention to ensure that irradiation does not alter selectivity or capacity, generate fines, or introduce leachables that could compromise Mo-99 purity or downstream Tc-99m generator performance. Dose mapping, accelerated irradiation testing, and studies of extractables/leachables together provide the basis for setting maintenance, calibration, and replacement intervals and for qualifying materials that retain mechanical integrity, chemical compatibility, and radiopurity over their service life.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Decomposition pathways and mitigation strategies for highly-stable hydroxyphenazine flow battery anolytes

Aqueous organic redox flow batteries are a promising technology for large-scale energy storage. The stability of the redox active organic molecules is increasingly being recognized as one of the major hurdles. Upon extended flow battery cycling, 7,8-dihydroxyphenazine-2 sulfonic acid (DHPS) undergoes desulfonation and reduction of a phenolic C–O bond to yield a mixture of 7/8-hydroxyphenazine-2-sulfonic acid, as well as hydrogenation of the aromatic ring system. Density functional theory (DFT) analysis of the charged DHPS, its ring-hydrogenated products, and variably substituted hydroxy phenazines has led to the development of a series of dihydroxylated phenazine isomers which provide insight into the effects of substitution pattern on solubility and stability. Seven dihydroxyphenazine (DHP) isomers were synthesized and their solubilities, electrochemical properties, flow battery cycling performance, and degradation pathways have been investigated. Based on theoretical and experimental results, hydroxyl substitution at the 1, 4, 6 and 9 positions yields highly stable derivatives, while substitution at the 2, 3, 7, and 8 positions results in unstable derivatives. Flow cells of 1,4- and 1,6-DHPs coupled with ferro/ferricyanide achieved high stabilities, with temporal capacity loss of 0.029 and 0.031% per day, respectively. Decomposition of 1,8- and 2,7-DHPs were found to arise from irreversible hydrogen rearrangement (tautomerization), yielding redox-inactive species. These results provide a detailed understanding of decomposition pathways and mitigation strategies for phenazine-based anolytes, and can provide general design guidelines for the development of stable redox-active organics.

25 ENERGY STORAGE↗
DOE OSTI2021

Formation of Surface Impurities on Lithium–Nickel–Manganese–Cobalt Oxides in the Presence of CO 2 and H 2 O

Surface impurities involving parasitic reactions and gas evolution contribute to the degradation of high Ni content LiNi x Mn y Co z O 2 (NMC) cathode materials. The transient kinetic technique of Temporal Analysis of Products (TAP), density functional theory, and infrared spectroscopy have been used to study the formation of surface impurities on varying nickel content NMC materials (NMC811, NMC622, NMC532, NMC433, NMC111) in the presence of CO 2 and H 2 O. CO 2 reactivity on a clean surface as characterized by CO 2 conversion rate in the TAP reactor follows the order: NMC811 > NMC622 > NMC532 > NMC433 > NMC111. The capacity of CO 2 uptake follows a different order: NMC532 > NMC433 > NMC622 > NMC811 > NMC111. Moisture pretreatment slows down the direct CO 2 adsorption process and creates additional active sites for CO 2 adsorption. Electronic structure calculations predict that the (012) surface is more reactive than the ($10\bar{1}4$) surface for CO 2 and H 2 O adsorption. CO 2 adsorption leading to carbonate formation is exothermic with formation of ion pairs. The average CO 2 binding energies on the different materials follow the CO 2 reactivity order. Water hydroxylates the (012) surface and surface OH groups favor bicarbonate formation. Water creates more active sites for CO 2 adsorption on the ($10\bar{1}4$) surface due to hydrogen bonding. The composition of surface impurities formed in ambient air exposure is dependent on water concentration and the percentage of different crystal planes. Different surface reactivities suggest that battery performance degradation due to surface impurities can be mitigated by precise control of the dominant surfaces in NMC materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗