Collaborative Concept Development
SNL and NGES were to collaborate to develop a demonstration system capable of analyzing flight test data.
SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
SNL and NGES were to collaborate to develop a demonstration system capable of analyzing flight test data.
Our overall goal in this research was to quantify the potential for threshold changes in natural emission rates of trace gases, particularly methane and carbon dioxide, from pan-arctic terrestrial systems under the spectrum of anthropogenically-forced climate warming, and the conditions under which these emissions provide a strong feedback mechanism to global climate warming. This goal was motivated under the premise that polar amplification of global climate warming will induce widespread thaw and degradation of the permafrost, and would thus cause substantial changes to the landscape of wetlands and lakes, especially thermokarst (thaw) lakes, across the Arctic. Through a suite of numerical experiments that encapsulate the fundamental processes governing methane emissions and carbon exchanges – as well as their coupling to the global climate system - we tested the following hypothesis in the proposed research: There exists a climate warming threshold beyond which permafrost degradation becomes widespread and stimulates large increases in methane emissions (via thermokarst lakes and poorly-drained wetland areas upon thawing permafrost along with microbial metabolic responses to higher temperatures) and increases in carbon dioxide emissions from well-drained areas. Besides changes in biogeochemistry, this threshold will also influence global energy dynamics through effects on surface albedo, evapotranspiration and water vapor. These changes would outweigh any increased uptake of carbon (e.g. from peatlands and higher plant photosynthesis) and would result in a strong, positive feedback to global climate warming. In collaboration with our Purdue and MIT colleagues, we have attempted to quantify global climate warming effects on land-atmosphere interactions, land-river network interactions, permafrost degradation, vegetation shifts, and land use influence water, carbon, and nitrogen fluxes to and from terrestrial ecosystems in the pan-arctic along with their uncertainties. Based on our study results along with a review of observed and projected climate changes in Northern Eurasia by others, we have also outlined a more integrated modelling approach that may be developed and applied in future studies to better capture the influence of earth system feedbacks and human activities on the evolution of climate change effects over time. Specifically, we have examined: 1) how evapotranspiration and water availability have been changing in Northern Eurasia and may change in the future including the impact of forcing uncertainties (Liu et al., 2013, 2014, 2015); 2) how soil consumption of atmospheric methane across the globe have been influenced and may be influenced by climate change and nitrogen deposition during the 20th and 21st centuries (Zhuang et al., 2013); 3) how wetland inundation extent influences net CO2 and CH4 fluxes from northern high latitudes (Zhuang et al., 2015); 4) the relative effects of various environmental factors (including permafrost degradation) on terrestrial dissolved organic carbon (DOC) loading of river networks across the pan-Arctic and how they have changed over the 20th century (Kicklighter et al., 2013); 5) the impacts of recent and future permafrost thaw on land-atmosphere greenhouse gas exchange across the pan-Arctic (Gao et al., 2012, 2013; Hayes et al., 2014; Kicklighter et al. 2015a, 2018); 6) how climate-induced vegetation shifts may affect carbon fluxes and future land use in Northern Eurasia (Jiang et al., 2012, 2016; Kicklighter et al., 2014a) and the globe (Zhuang et al. 2015b); 7) the relative importance of legacies from past land use, future land-use change and climate change on projections of terrestrial carbon fluxes (Monier et al., 2015; Kicklighter et al., 2016); and 8) how the effects of earth system feedbacks and human activities can be better incorporated in assessments of climate change impacts (Monier et al., 2017; Groisman et al., 2018).
Manaus, a city of nearly two million people, represents an isolated urban area having a distinct urban pollution plume within the otherwise pristine Amazon Basin. The plume has high concentrations of oxides of nitrogen and sulfur, carbon monoxide, particle concentrations, and soot, among other pollutants. Critically, the distinct plume in the setting of the surrounding tropical rain forest serves as a natural laboratory to allow direct comparisons between periods of pollution influence to those of pristine conditions. The funded activity of this report is related to the Brazil-USA collaborative project during the two Intensive Operating Periods (wet season, 1 Feb - 31 Mar 2014; dry season, 15 Aug - 15 Oct 2014) of GoAmazon2014/5. The project addresses key science questions regarding the modification of the natural atmospheric chemistry and particle microphysics of the forest by present and future anthropogenic pollution.
The Electricity Storage Handbook (Handbook) is a how-to guide for utility and rural cooperative engineers, planners, and decision makers to plan and implement energy storage projects. The Handbook also serves as an information resource for investors and venture capitalists, providing the latest developments in technologies and tools to guide their evaluations of energy storage opportunities. It includes a comprehensive database of the cost of current storage systems in a wide variety of electric utility and customer services, along with interconnection schematics. A list of significant past and present energy storage projects is provided for a practical perspective. This Handbook, jointly sponsored by the U.S. Department of Energy and the Electric Power Research Institute in collaboration with the National Rural Electric Cooperative Association, is published in electronic form at www.sandia.gov/ess.
General Atomics has collaborated with PPPL since 1999 in support of NSTX and NSXT-U by leveraging DIII-D program expertise. John Ferron was the principal investigator (PI) for the first nine years (to 2008) and Rob La Haye since then. The research effort evolved over a number of three-year grants and originally included both the core (control, stability, resonant error fields) and the boundary (ELMs, divertor, error fields). In 2014 the current and last grant extension was stretched to four years and split into a core grant (advanced scenarios and control, macroscopic plasma stability and extending 3D magnetics diagnostics) and a boundary grant. Todd Evans is the PI for the new boundary grant which while also for four years expires later than the core grant; a separate end of grant (EOG) report for that is due in July 2018.
The Large Synoptic Survey Telescope (LSST) Dark Energy Science Collaboration (DESC) will use five cosmological probes: galaxy clusters, large scale structure, supernovae, strong lensing, and weak lensing. This Science Requirements Document (SRD) quantifies the expected dark energy constraining power of these probes individually and together, with conservative assumptions about analysis methodology and follow-up observational resources based on our current understanding and the expected evolution within the field in the coming years. We then define requirements on analysis pipelines that will enable us to achieve our goal of carrying out a dark energy analysis consistent with the Dark Energy Task Force definition of a Stage IV dark energy experiment. This is achieved through a forecasting process that incorporates the flowdown to detailed requirements on multiple sources of systematic uncertainty. Future versions of this document will include evolution in our software capabilities and analysis plans along with updates to the LSST survey strategy.
This report analyzes the workings of the “Real - time Adaptive Acceleration of Dynamic Experimental Science” LDRD team, led by James Ahrens, Cindy Bolme and Richard Sandberg, using it to outline practices of successful and innovative LDRD collaborations.
The PRIMA-X (Performance Retargeting of Instrumentation, Measurement, and Analysis Technologies for Exascale Computing) project was a collaborative research effort between the University of Oregon (UO) (Malony, PI) and the German Research School for Simulation Sciences GmbH (Wolf, PI) originally, later changed to the Technical University of Darmstadt. Our project aims addressed five areas -- scalability, dynamism, heterogeneity, locality, energy -- that present challenges to performance measurement systems at exascale, with emphasis placed on the first three. In essence, the general goal of the project was to prototype new technologies for performance measurement, analysis, and tuning on future exascale-enable computer systems. Each institution followed its research agena, with periodic coordination and sharing of ideas and results. After the 3-year funding, the PRIMA-X grant was extended beyond the 3-year period at no cost until the end of August 2018. This is the final technical report on the University of Oregon's progress during the entire project scope. Our main focus was to address the PRIMA-X challenges both through technological advancements in the TAU Performance System and their application, as well as prototypes developed in association with other exascale-directed research efforts (prior to the Exascale Computing Project (ECP)). Progress in Years 1 and 2 are summarized and our achievements in Year 3 (plus the extension) are discussed in more detail. This includes specific efforts on power, runtime systems, and monitoring infrastructure.
This award from the Division of Chemistry (CHE) of the National Science Foundation, with additional support from the National Institutes of Health (National Institute of general Medical Sciences) and the Department of Energy (Basic Energy Sciences) supports Prof. Rigoberto Hernandez of the Georgia Institute of Technology and his colleagues in their efforts through the Open Chemistry Collaborative in Diversity Equity (OXIDE) at increasing participation in the chemical sciences by all members of American society, including members of groups that have been traditionally underrepresented in the sciences. They will do this through a broad series of activities including workshops, assessments of interventions performed within chemistry departments, and broad dissemination of e.g. best practices. Work like that of Prof. Hernandez and his colleagues is aimed at finding effective means for recruitment and retention of the most talented Americans into the chemical enterprise. Success in these efforts will have profound implications for American economic prosperity and continued competitiveness.
Changes to the LANL / BNL photocathode programs are a strategic response to evolving needs and opportunities within NNSA. The Materials by Design strategy engages the broader material science communities at both LANL and BNL. Progress has been non-linear with time and investment. Techniques honed for one application can be rapidly applied to many others. For example, Cs 2 Te following successes of smooth K 2 CsSb. We enter a cycle of using accelerator-based tools to improve accelerators. Providers of advanced tools of material science (accelerator based x-ray light sources) are now availing themselves of the same capabilities to improve the next-generation machines. We are looking to define future collaborations.
Savannah River National Laboratory has been investing into its cybersecurity capabilities over the last few years. Cybersecurity has been a rapidly growing area for the CSRA in general and has included the consolidation of Cyber and Electronic Warfare units at Fort Gordon. This consolidation has been driven by the convergence of cyberwarfare and electronic warfare as the technologies behind both fields unify. This convergence, investment by SRNL into cybersecurity for critical infrastructure, and the desire for collaboration between the Army and SRNL has resulted in an opportunity for SRNL to develop R&D capabilities in electronic warfare that will complement SRNL’s cybersecurity efforts. Discussions between SRNL and the U.S. Army Cyber School (USACyS) has identified a general gap in electronic warfare capability in which both entities could contribute to solves.
Simulation of nuclear systems requires complete data that represents the relevant nuclear physics. This requires many types of experimental measurements, theoretical physics, semi-empirical models and software systems, as well as experts to integrate and guide the process. This discipline is collectively known as nuclear data, and separate programmes within various European countries, the USA, Japan, Russia, and other OECD Nuclear Energy Agency (NEA) member countries have been operating for many decades. The NEA Working Party on International Nuclear Data Evaluation Co-operation (WPEC) exists to improve the quality and completeness of nuclear data by bringing together representatives of the major nuclear data evaluation projects of NEA member countries and selected Invitees. The Sub- and Expert Groups of the WPEC typically focus on specific technical topics, while the Collaborative International Evaluated Library Organisation Pilot Project (CIELO) was established to generate complete evaluations for a selection of the most important isotopes for criticality in nuclear technologies: 235,238 U, 239 Pu, 56 Fe, 16 O and 1 H.
The common states of matter on Earth are solids, liquids and gases. Putting energy into gases can result in the 4th state of matter known as plasma, which consists of electrically charged particles (electrons and ions, both positive and negative) and neutral atoms and molecules. While uncommon on the Earth, plasma makes up more than 99% of the visible matter in the universe. Where plasma comes in contact with material boundaries, a thin region near the plasma boundary usually forms to isolate the plasma from the boundary. This thin region is called the plasma sheath. Experiments performed under aimed at improving our understanding of plasma sheaths and associated phenomena as fundamental to understanding all bounded plasmas. Plasma studied in this work are similar to those used in plasma applications such as the etching of semiconducting materials to make computer chips, in plasma space propulsion satellite engines, and used in experimental plasma fusion devices. The majority of experimental studies were carried out at the University of Wisconsin-Madison in close collaboration with Dr. Severn at the University of San Diego (USD), where most of diagnostic development for laser-induced fluorescence (LIF) measurements were carried out. USD is primarily an undergraduate institution. The award made possible outreach activities that promoted engagement of undergraduate students with diverse backgrounds in science, technology, engineering and mathematics (STEM) disciplines.
The complexity of radiative transfer, its importance to the exchange of energy in the climate system, and its high computational cost establishes importance of an accurate and efficient radiative transfer parameterization for climate simulation. Previous work by the proposing team at AER led to the development of the radiation code, RRTMG, which has been widely accepted by the global modeling community as a fast and accurate advancement over the previous generation of radiation codes. It has been in use in the NCAR CESM for many years, and it has been implemented in the initial version the DOE E3SM model. However, its computational cost remains high relative to other components in part due to its complexity and to its inefficient use of modern optimization strategies, and this project helped address this limitation for the code’s application in E3SM. Under other funding, the Investigators of this project led an effort to develop a high-performance broadband radiation code, called RTE+RRTMGP, which is a completely restructured code that will take advantage of modern computational capabilities to enhance its performance while retaining the strengths and accuracy of the original code. Designed to perform over a range of computer architectures, RTE+RRTMGP makes extensive use of Fortran 2003 features to improve both its efficiency and its use of memory. RTE+RRTMGP is expected to be adopted in the next generation of RTE+RRTMGP. This project allowed for advancements to the code’s computational capabilities and adding new and enhanced features. This included revising RTE+RRTMGP to run on GPU processors, analysis of and improvements to the code’s timing, modifying the gas optics in RRTMGP to increase the code’s accuracy, extensive validation of computed fluxes, heating rates and forcings, generating a cloud optical property and vertical sampling capabilities for RTE+RRTMGP, implementing a fast and accurate longwave scattering capability, and groundwork for the inclusion of a capability to specify solar variability. Many of the accomplishment in this project necessitated significant collaboration with the E3SM development team. The result of this project was optimization of a key physical component (radiative transfer calculations) of E3SM, directly supporting E3SM’s overarching global modeling objectives. More broadly, this project provided overall advancements in the use of radiative transfer calculations in atmospheric modeling and simulation, particularly for climate.
This report discusses the progress on the collaboration between Sandia National Laboratories (Sandia) and Japan Atomic Energy Agency (JAEA) on the sodium fire research in fiscal year 2019. First, the current sodium pool fire model in MELCOR, which is adapted from CONTAIN-LMR code, is discussed. The associated sodium fire input requirements are also presented. A proposed model improvement developed at Sandia is discussed. Finally, the validation study of the sodium pool fire model in MELCOR carried out by a JAEA's staff is described. To validate this model, a JAEA sodium pool fire experiment (F7-1 test) is used. A preliminary calculation is performed using a modified MELCOR model from a previous experiment simulation. The results of the calculation are discussed as well as suggestions for improvement. Finally, recommendations are made for new MELCOR simulations for next fiscal year, 2020.
Dupuis hosted our biennial CEA/NNSA collaboration meeting, and Kawano and Lovell of LANL and Tamagno of CEA/DEN (Cadarache) visited CEA/DAM to discuss current issues and further developments in nuclear reaction modeling, nuclear data evaluation, and relevant programs of modern computer science, especially the machine learning technology. The discussions included topics of our common interest such as neutron inelastic scattering, capture, and fission, with particular emphasis on the actinide nuclear data evaluations. We report briefly the summary of our discussions. We also had a half-day video meeting with Capote of IAEA and Kerveno of IPHC to discuss nuclear reactions on actinides.
Forged stainless steels are used as the materials of construction for tritium reservoirs. During service, tritium diffuses into the reservoir walls and radioactively decays to helium-3. Tritium and decay helium cause a higher propensity for cracking which could lead to a tritium leak or failure of a tritium reservoir. Fracture toughness properties are needed for designing tritium reservoirs and evaluating the long-term effects of tritium on their structural properties. A key result of prior studies is that the long-term cracking resistance of stainless steels in tritium service depends greatly on the interaction between decay helium and the steels’ forged microstructure. Designers and modelers at Sandia National Laboratories (SNL) have identified key gaps in the data available on material performance in tritium. Thus, a collaborative plan and schedule of tests have been developed with SRNL and SNL to fill these gaps using a range of tensile test and fracture mechanics test geometries, at stockpile relevant temperatures. These studies target the fundamental deformation mechanisms and the influence of tritium-decay-helium on their behavior. This report outlines the goals of each program and describes the sample test matrices and experimental conditions. This report fulfills the requirements for a portion of the Enhanced Surveillance Campaign (ESC) FY19 Level 2 milestone 6725 to deliver an annual report on the aging studies of reservoir materials.
The United States Department of Energy’s Spent Fuel and Waste Disposition (SFWD) program is investigating the design and safety function of generic nuclear geologic repositories in a variety of geologic settings (salt, argillite, and crystalline rock). Different configurations and loadings of spent nuclear fuel and waste within disposal canisters are also being investigated, some of which have the potential to generate repository temperatures higher than previously considered (i.e., temperatures >100ºC) by foreign and domestic concepts. This report expands on engineered barrier material stability in a high temperature crystalline rock repository through high temperature hydrothermal experiments. Experiments were designed to develop engineered barrier system (EBS) concepts in a hightemperature crystalline environment in 1) bentonite-Grimsel Granodiorite interactions, 2) bentonite-cement reactions, and 3) interaction between waste canister materials and bentonite. Experiment results are applied to understanding long-term repository performance in terms of radionuclide isolation. One hydrothermal experiment was completed in the rocking autoclaves at LANL in FY-20: IEBS-6 (Grimsel Granodiorite + Wyoming bentonite + cured ordinary Portland cement + Grimsel Granodiorite synthetic groundwater, 250ºC/150 bar, 8 weeks). Several other experiments were planned but were delayed due to the COVID-19 pause in laboratory work. In addition, some characterization of the reaction products of experiments conducted in FY-20 was prevented by COVID-19. Mineral phase chemistry was not measured via electron microprobe analyses for IEBS-6. Quantitative X-ray diffraction results from IEBS-6 and HBT-1 were not completed. The missing analyses and discussion of the results will be included in next year’s report. New characterization that was completed includes scanning electron microscopy of reaction products from IEBS-6, quantitative X-ray diffraction results are presented from IEBS-1 through IBES-5, preliminary scanning electron microscope images and chemical analyses for IEBS-6, X-ray diffraction of the clay fraction from all experiments, measurement/imaging of mineral growth on the surface of steel coupons. Major observations pertaining to bentonite stability in a Grimsel Granodiorite environment include the stability of Na-montmorillonite at 250°C, the formation of trace CSH phases, and the formation of bentonite colloids on experiment cooling. The addition of a cured chip of Portland cement to the bentonite-Grimsel system results in slightly higher pH values and the formation of diverse secondary mineral phases that were not observed in the previous experiments (e.g., analcime, garronite, CSH phases). The new characterization efforts related to the interaction of stainless-steel coupons and bentonite clay focused on thickness and mineralogy of phases that formed at the steel surface. In Wyoming bentonite + Grimsel Granodiorite systems, newly formed minerals at the bentonitesteel coupon interface included alteration of the outermost steel edge to Fe,Cr-oxide phases, followed by Fe-rich phyllosilicates (Fe-saponite, chlorite) and interbedded Fe,Cr,Ni-sulfide phases (pentlandite). Hydrothermal experiments were completed to assess uranium-carbonate complexation at conditions relevant to high-temperature disposal. Autoclave solubility experiments were conducted at 150 to 250ºC with a range of carbonate and uranium concentrations. The experiment results were characterized via situ UV-Visible spectroscopy and synchrotron-based in situ XAS techniques. Results show a significant decrease in the stability of uranyl-carbonate complexes at temperatures above 100ºC along with the precipitation of uranium oxides. Further, at T > 200ºC, results show that uranyl-hydroxyl complexes control solubility of uranium instead of the previously predicted uranyl-carbonate species. These results are significant for understanding the mobility of uranium in the EBS, which will likely contain carbonate-rich fluids. International research efforts focused on three main areas: 1) participation in international conferences, 2) building collaborations with foreign repository programs, and 3) the initiation of an experimental program to complement the full-scale HotBENT test at the Grimsel test site. This experiment included Wyoming bentonite + low carbon steel + Grimsel Granodiorite synthetic groundwater and was run at the planned maximum temperature of the HotBENT test (200°C). Complete characterization of reaction products was hindered by disruptions to laboratory work but will be reported in the next FY. The experimental results obtained in FY-20 continue to document the wide-ranging effects of bulk composition and pressure-temperature conditions in the mineralogical and geochemical evolution of a high-temperature repository environment. Concepts developed will be used to inform models of long-term material stability in a generic crystalline rock-hosted repository.