Search NASA⌕ Search

SEARCH · Search NASA

Results for “Complex oxides”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29
All sourcesNASA NTRSDOE OSTI
NASA NTRS1982

The photochemistry of the paleoatmosphere

Recent progress in the understanding of the chemistry and photochemistry of the paleoatmosphere is reviewed with emphasis on the application of photochemical models to the investigation of the evolution of the atmosphere. Photochemical calculations are presented which show that a primordial highly reducing atmosphere composed of methane and ammonia, if it formed at all, would be short-lived in the presence of solar ultraviolet radiation, giving way rapidly to a more mildly reducing atmosphere of carbon dioxide and nitrogen. Estimations of O2 produced from the photolysis of water vapor prior to the emergence of photosynthesis range from less than 10 to the -14th to 0.1 times the present atmospheric level, indicating the need for further research. A series of photochemical models of increasing complexity has been developed to study the evolution of atmospheric ozone taking into account reactions with O atoms, hydrogen oxides, nitrogen oxides, and chlorine as well as vertical transport, temperature and tropospheric chemistry so that the total content and vertical distribution of O3 may be determined for a specified level of paleoatmospheric O2.

Levine, J. S.↗
NASA NTRS1983

A modeling study of SO(x)-NO(x)-hydrocarbon plumes and their transport to the background troposphere

The behavior of a complex urban plume and its transport to the background troposphere are analyzed in terms of a model including sulfur oxide, nitrogen oxide and hydrocarbon (HC) photochemistry. A reaction mechanism consisting of 73 NO(x), SO(x) and HC reactions is employed in a model taking account of plume dilution, entrainment, deposition and the development of a diurnal mixing layer from a ground-based nocturnal inversion. When simulation results are compared with field measurements of the urban plumes leaving St. Louis and Milwaukee, and a power plant within the Milwaukee plume, the predicted concentration profiles of NO(x), SO2 and O3 are found to be in close agreement with the measurement, although agreement with the rate of transformation of SO2 to SO4(2-) is less good. Simulations made for a hypothetical urban location under a range of background concentrations and initial HC concentrations show particulate sulfate concentrations to depend strongly on the HC/NO(x) ratio, indicating that the homogeneous gas-phase transformation may occur at night.

Balko, J. A.↗
NASA NTRS1986

Presence, segregation and reactivity of H, C and N dissolved in some refractory oxides

The sources of impurities, particularly carbon, in high melting oxides and silicates are discussed, along with detection and quantification methods. The impurities are important for their effects on bulk material properties through the media of, e.g., surface or grain boundary characteristics. The impurities are usually encountered by the contact of the oxide (refractory) material with volatiles such as H2O and CO2, which become incorporated in the material and form anion complexes with oxygen acting as a covalent bonded ligand. The specific processes undergone by MgO in assimilating C impurities are delineated, using data obtained with X-ray photoelectron spectroscopy, Auger electron spectroscopy, secondary ion mass spectrometry and nuclear reaction profiling. Finally, maintenance of a supersaturated solid solution with C impurities by space charge control is described as a means of offset impurity effects.

Freund, F.↗
NASA NTRS2005

Ultrasonic Guided-Wave-Scan System Used to Characterize C-Enhanced Silicon Carbide Composite During Creep- Rupture Tests

Ceramic matrix composites (CMCs) are being developed for advanced aerospace propulsion applications in order to save weight, improve reuse capability, and increase performance. However, mechanical and environmental loads applied to CMCs can cause degradation in the form of discrete flaws and distributed microdamage that can play a significant role in reducing desirable physical properties. Categories of microdamage include fiber/matrix debonding (interface failure), matrix microcracking, fiber fracture and buckling, oxidation, and second-phase formation. Distributed microdamage in CMCs has proven difficult to characterize nondestructively because of the complex microstructure and macrostructure of these materials, and a recent study regarding the durability of a ceramic matrix composite discussed the requirement for improved nondestructive evaluation (NDE) methods for monitoring degradation in these materials.

Roth, Don J.↗
NASA NTRS2015

Development of the US3D Code for Advanced Compressible and Reacting Flow Simulations

Aerothermodynamics and hypersonic flows involve complex multi-disciplinary physics, including finite-rate gas-phase kinetics, finite-rate internal energy relaxation, gas-surface interactions with finite-rate oxidation and sublimation, transition to turbulence, large-scale unsteadiness, shock-boundary layer interactions, fluid-structure interactions, and thermal protection system ablation and thermal response. Many of the flows have a large range of length and time scales, requiring large computational grids, implicit time integration, and large solution run times. The University of Minnesota NASA US3D code was designed for the simulation of these complex, highly-coupled flows. It has many of the features of the well-established DPLR code, but uses unstructured grids and has many advanced numerical capabilities and physical models for multi-physics problems. The main capabilities of the code are described, the physical modeling approaches are discussed, the different types of numerical flux functions and time integration approaches are outlined, and the parallelization strategy is overviewed. Comparisons between US3D and the NASA DPLR code are presented, and several advanced simulations are presented to illustrate some of novel features of the code.

CFD↗
DOE OSTI2025

Time-resolved Brownian tomography of single nanocrystals in liquid during oxidative etching

Colloidal nanocrystals inherently undergo structural changes during chemical reactions. The robust structure-property relationships, originating from their nanoscale dimensions, underscore the significance of comprehending the dynamic structural behavior of nanocrystals in reactive chemical media. Moreover, the complexity and heterogeneity inherent in their atomic structures require tracking of structural transitions in individual nanocrystals at three-dimensional (3D) atomic resolution. In this study, we introduce the method of time-resolved Brownian tomography to investigate the temporal evolution of the 3D atomic structures of individual nanocrystals in solution. The methodology is applied to examine the atomic-level structural transformations of Pt nanocrystals during oxidative etching. The time-resolved 3D atomic maps reveal the structural evolution of dissolving Pt nanocrystals, transitioning from a crystalline to a disordered structure. Our study demonstrates the emergence of a phase at the nanometer length scale that has received less attention in bulk thermodynamics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Mechanistic and Kinetic Analysis of Complete Methane Oxidation on a Practical PtPd/Al 2 O 3 Catalyst

A PtPd/Al 2 O 3 catalyst developed for the complete oxidation of methane from the ventilation air of underground coal mines is compared against a model PdO/Al 2 O 3 catalyst. Although the PtPd/Al 2 O 3 catalyst is substantially more active and stable than the model catalyst, the nature of active sites between the two catalysts is deemed to be fundamentally the same based on their response to different feed gas compositions and the evolution of surface CO adsorption complexes during time-resolved CO adsorption DRIFTS experiment. For both catalysts, coordinatively unsaturated Pd sites are considered the active centers for methane activation and the subsequent oxidation reaction. H 2 O competes with CH 4 for the same active sites, resulting in severe inhibition. Additionally, the CH 4 oxidation reaction also causes self-inhibition. Taking both inhibition effects into consideration, a relatively simple kinetic model is developed. The model provides a good fit of the 72 sets of kinetic data collected on the PtPd/Al 2 O 3 catalyst under practically relevant reaction conditions with CH 4 concentration in the range of 0.05–0.4%, H 2 O concentration of 1.0–5.0%, and reaction temperatures of 450–700 °C. Kinetic parameters based on the model suggest that the CH 4 activation energy on the PtPd/Al 2 O 3 catalyst is 96.7 kJ/mol, and the H 2 O adsorption energy is –31.0 kJ/mol. Both values are consistent with the parameters reported in the literature. The model can be used to develop catalyst sizing guidelines and be incorporated into the control algorithm of the catalytic system.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Synthesis of UO 2 nanoparticles via coulometric titration: influence of electrolytes and ligands on synthesized particle properties

Here, this study investigates the controlled synthesis of uranium oxide nanoparticles (UO 2 NPs) via coulometric titration under ambient conditions, focusing on the impact of electrolyte anions, salt concentrations, and strongly complexing ligands on particle formation and properties. Using dilute solutions of mineral acids (HNO 3 , HCl, and HClO 4 ), we demonstrate that the choice of electrolyte anion affects particle size, polydispersity, and surface charge. Particle characterization using dynamic light scattering and transmission electron microscopy shows that particles synthesized in perchlorate are largest and show a high degree of polydispersity. In comparison, particles synthesized in chloride are smaller and more uniform in size. Synthesis in nitrate yields a wide variety of particle sizes, with the major fraction (>65 %) having a smaller size than that obtained in the other two electrolytes. The presence of more strongly coordinating ligands such as sulfate and acetate modulate hydrolysis and condensation reactions, with sulfate suppressing nanoparticle formation across a wide concentration range ([SO 4 2- ] > 5 mM) and acetate enabling stable colloidal suspensions at [HOAc] ≤ 0.1 M. Synthesis in concentrated electrolytes (2 M NaNO 3 , NaCl, or NaClO 4 ) accelerates reaction kinetics but introduces challenges, as particles showed increased polydispersity and aggregation, and were more prone to oxidation. Electrolyte effects on actinide oxide nanoparticle formation are discussed and a short comparison to established nanoparticle syntheses is drawn. This work underscores the importance of tailoring synthesis parameters to achieve desired nanoparticle properties, providing valuable insights for optimizing UO 2 NP production for various applications.

Actinide hydrolysis↗
DOE OSTI2024

Engineering Active Sites of Metal/Metal Oxide Catalysts by Oxide Ligand Overlayers

Abstract Engineering sites of supported metal catalysts is essential to enhancing activity and selectivity. Such enhancement is typically achieved by particle size modification, surface alloying, or attaching molecular ligands. Yet, control strategies for complex, multifunctional molecules and catalysts, where selectivity is crucial, are lacking. Here, we demonstrate that submonolayer WO x with tunable coverage preferentially decorates well‐coordinated Pt terrace sites as a stable ligand. By combining experimental kinetics with probe molecules, in situ spectroscopies, and first‐principles modeling, we show that the WO x coverage on Pt modifies the metal‐to‐acid site balance while retaining the acid strength intact and results in optimal reactivity for metal‐acid catalyzed reactions at a specific metal, size, and support‐dependent WO x coverage. The oxide can also alter the reactant adsorption mode, reversing selectivity and pathways from terrace‐ to step‐dominated, as evidenced in furfural decarbonylation and hydrogenation. The insights open avenues for improving metal/metal oxide catalysts beyond the specific system.

Zhou, Jiahua↗
DOE OSTI2026

Evaluating Np(v) disproportionation: effect of Np concentration

The role of Np(V) concentration as a potential chemical driver of Np(V) disproportionation was investigated by probing Np redox chemistry in two different acid media using visible-near-infrared absorbance spectroscopy. In situ spectroscopy of chemically and electrochemically manipulated Np oxidation states at molar concentrations of Np underscores the difficulty in stabilizing pure Np(V), even in dilute acid. A Np(VI) component coexisting with the majority Np(V) component was observed in both HNO 3 and HCl. Electrochemical tuning and subsequent spectroscopic analysis of the Np(VI/V) ratio revealed neptunyl self-complexation as a key mechanism occurring in both acid media. Chemical reduction of the Np(VI) component and stabilization of a minor Np(IV) component in HNO 3 were observed; however, spectral data indicated that these two oxidation states were not observed to coexist, and pure Np(V) was stabilized only briefly. These findings demonstrate that high Np concentrations significantly affect the redox chemistry of Np in acidic solutions. Finally, the occurrence of Np(V) disproportionation could not be definitely determined by spectral data, but other mechanisms such as self-complexation and radiolysis, which potentially compete with disproportionation, must be considered.

Gilson, Sara E. [Oak Ridge National Laboratory (OR↗
DOE OSTI2025

Elucidating the Competitive Hydrodeoxygenation of Lignin-Derived Oxygenates over Bulk MoO 3 Catalyst through Kinetic Analysis

Ambient pressure hydrodeoxygenation (HDO) of lignin-derived oxygenates over molybdenum oxide-based catalysts is an effective strategy to produce chemicals that can be directly integrated into our existing petrochemical infrastructure. Complexities pertaining to the simultaneous kinetic and mechanistic analysis of HDO have limited research endeavors to single-compound systems. Although valuable insight into the catalytic reaction has been gained through this approach, it provides limited understanding of the competitive adsorption behavior manifest in a realistic multioxygenate reaction environment. To address this shortcoming, simultaneous gas-phase acetone and anisole HDO was performed at 330 °C and ≤1 bar H 2 partial pressure over bulk MoO 3 . Propene, propane, and benzene were the HDO products formed, showing a similar product distribution to the single-compound system. Selectivity to propene and propane was ∼14 times higher than benzene, even at three times higher anisole partial pressure compared to acetone. A negative anisole HDO (−0.97 ± 0.22) rate order with varying acetone partial pressure suggested a strong inhibition effect on anisole HDO by acetone. Conversely, with increasing anisole partial pressure, a rate order of −0.07 ± 0.12 was observed for acetone HDO, implying a weak impact of anisole cofeed on acetone HDO. A kinetic-driven approach was taken to estimate the relative adsorption constants of the oxygenates. Acetone exhibited a 6.4 times higher adsorption propensity on the HDO active site than anisole. Relative adsorption constants for phenolics increased with increasing basicity of the oxygenate but decreased for aliphatic molecules, suggesting a volcano-shaped relationship. The results suggest the possibility of an optimal electron density around the molecule’s oxygen atom to maximize the molecule’s adsorption strength.

acid sites↗
DOE OSTI2026

Oligoether-Functionalized PEDOT: Combining an EDOT Backbone with Polar Side Chains for Solution Processability and High Electrical Conductivity

Conjugated polymers functionalized with oligoether (OE)-based side chains are a key class of materials for various organic electronic applications, including transparent electrodes, thermoelectrics, electrochromic displays, and electrochemical transistors. Herein, we report a highly soluble OE-functionalized poly(3,4-ethylenedioxythiophene) (PEDOT) homopolymer, prepared by direct (hetero)arylation polymerization, which allows solution processing to yield films with comparable redox properties to oxidatively polymerized PEDOT. This polymer, PEDOT(OE3), when optimally oxidatively doped, reaches among the highest electrical conductivities of any OE-functionalized polymer and is comparable to more synthetically complex OE-functionalized polymers. X-ray scattering and spectroscopy were utilized to rationalize the transport properties resulting from varying the doping level. Comparison of PEDOT(OE3) to a series of OE-functionalized dioxythiophenes with varying amounts of 3,4-ethylenedioxythiophene units allows for a deeper understanding of structure–property relationships through charge-transport models. Ultimately, PEDOT(OE3) is shown to be a material with exceptional charge-transport properties and is promising for various applications.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Accessibility and Reactivity of Pentavalent Plutonium under Alkaline Conditions

Plutonium exhibits a particularly complex and rich aqueous chemistry due to a dynamic redox equilibrium that can result in the coexistence of four different oxidation states in aqueous solution. Within this equilibrium, pentavalent plutonium is among the most soluble and dominant oxidation states of Pu in neutral to alkaline aqueous solutions of relevance to environmental chemistries and the extreme chemical environments encountered in high-level radioactive wastes. Despite this, the fundamental chemistry of Pu­(V) under such conditions remains poorly understood. Here, in this study, we demonstrate the redox accessibility of Pu­(V) in alkaline media based on the observations of an electrochemically reversible Pu­(VI/V) couple at E 1/2 = 0.19 V vs Hg/HgO (0.29 V vs NHE), allowing us to electrolytically generate Pu­(V) in alkaline solution. These Pu­(V) solutions remained stable under ambient conditions for at least 9 days before precipitation of crystalline Na 2 [Pu V O 2 (OH) 3 ]·2H 2 O, the first structurally characterized Pu­(V) hydroxide. The modest potential of the Pu­(VI/V) redox couple allowed us to reproduce Na 2 [Pu V O 2 (OH) 3 ]·2H 2 O synthetically as well as isolate two additional novel Pu­(V)-bearing hydroxide phases Na­[Pu V O 2 (OH) 2 (H 2 O)]·2.5H 2 O and K 2 [Pu V O 2 (OH) 3 ]·2H 2 O as single crystals from alkaline reactions under mild hydrothermal conditions (<200 °C) using Na 2 O 2 and KO 2 as reductants. This reactivity is rationalized and informed by our electrochemical measurements. The properties of the Pu­(V) solids were further characterized by using vibrational and optical spectroscopy.

Kravchuk, Dmytro V. [Argonne National Laboratory (↗
DOE OSTI2025

Bonding and reactivity of isostructural uranyl and neptunyl peroxide phases

Understanding the reactivity of actinide peroxides is critical for predicting the behavior of spent nuclear fuel in radiolytic environments. Herein, we report the synthesis and characterization of a lithium neptunyl(VI) hydroxo peroxo compound (LiNp), which is isostructural to the uranyl analogue (LiU). Single-crystal X-ray diffraction reveals that LiNp contains both [NpO 2 (O 2 ) 3 ] 4- and [NpO 2 (OH) 4 ] 2- units stabilized by Li + and hydrogen bonding and Raman spectroscopy shows systematic redshifts in neptunyl vibrational modes relative to uranyl. DFT calculations highlight the importance of secondary coordination in reproducing vibrational and structural features, but challenges remain with correctly modeling strong sigma donors. Solid-state EPR spectroscopy and DFT confirm superoxide stabilization within LiU and calculations suggest favorability of the analogous radical species in LiNp. Solution state EPR spectroscopy with the radical spin trap 5-tert-butoxycarbonyl-5-methyl-1-pyrroline N-oxide (BMPO) reveal evidence of superoxide in the LiU and LiNp phases and suggests stabilization of superoxide within actinyl triperoxide complexes, forming [AnO 2 (O 2 ) 2 (O) 2 • ] 3- .

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2025

Phycobilisome core architecture influences photoprotective quenching by the Orange Carotenoid Protein

Photosynthetic organisms rely on sophisticated photoprotective mechanisms to prevent oxidative damage under high or fluctuating solar illumination. Cyanobacteria, which have evolved a unique, water-soluble light-harvesting complex—the phycobilisome—achieve photoprotection through a photoactivatable quencher called the Orange Carotenoid Protein (OCP). Phycobilisomes are highly symmetric and modular, formed by hierarchical assembly of conserved subunits into diverse geometries ranging from simple bundles to elaborate fan- or bouquet-like macromolecular architectures. Although OCP is known to provide photoprotection across species of cyanobacteria with different phycobilisome structures, it is not known whether or how these structural variations relate to changes in the photoprotective function of OCP. For example, OCP was recently discovered to bind as a dimer at two specific instances of an abundant structural motif on the tricylindrical phycobilisome of Synechocystis sp. PCC 6803, yet these sites are sterically inaccessible on a more common pentacylindrical phycobilisome ( Anabaena sp. PCC 7120). To understand how structural modularity and binding specificity contribute to conservation of OCP binding sites and function across different phycobilisome architectures, here we compare experimentally measured photophysical states accessible to these prototypical tricylindrical and pentacylindrical phycobilisomes, with and without OCP, at the single-molecule level. Together with Monte Carlo simulations of exciton transfer in OCP-quenched phycobilisomes, our results suggest that OCP binds at distinct and specific sites in each type of phycobilisome, yet provides nearly identical quenching strength to both phycobilisomes. Our findings highlight the utility of modular phycobilisome structures in balancing robust conservation of photoprotective function with adaptability of site-specific binding across species.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

Hydrodynamic characterization of the redox chemistry of crown-encapsulated uranyl complexes

The redox properties of actinide-containing species strongly influence their reactivity, speciation, and interfacial behavior, but the experimental quantification of the electrochemical characteristics of molecular actinide complexes in nonaqueous media has not received the attention it deserves. Here, results from hydrodynamic methods and electrochemical simulations of U(VI)/U(V) redox are reported, including quantification of heterogeneous electron-transfer kinetics and estimation of chemical reversibility of U(VI)/U(V) interconversion at electrodes in acetonitrile-based electrolyte. The complexes investigated are recently reported U(VI) and U(V) complexes in which the uranyl ion (UO 2 n+ ) is encapsulated in a macrocyclic 18-crown-6-like moiety templated by a Pt(II) center. These complexes feature the most positive value U VI /U V reduction potential yet reported and are thus particularly relevant to study of facile U(V) generation from U(VI) precursors as well as uranium electroanalysis. Rotating disk electrode (RDE) studies have been used to quantify the diffusion coefficients of the U(VI) and U(V) complexes, and standard heterogeneous electron transfer rate constants ( k 0 ) for the redox have been determined using a conventional Koutecký-Levich analysis. Rotating ring-disk electrode (RRDE) studies have been used to directly interrogate the chemical reversibility of U(VI)-U(V) interconversion, confirming that reduction of the U(VI) complex at an Au disk is associated with formation of the U(V) analogue that can be readily re-oxidized at a Pt ring under hydrodynamic (rotating) conditions. Because measurements of the type reported here are generally associated with current flows that are larger than those found in corresponding quiescent (unstirred) conditions, our findings suggest that hydrodynamic methods could be advantageous for design of electroanalytical approaches to detection of actinide species and study of their redox properties.

actinides↗
NASA NTRS1973

Material and structural studies of metal and polymer matrix composites

Fiber-reinforced composites and design analysis methods for these materials are being developed because of the vast potential of composites for decreasing weight and/or increasing use temperature capability in aerospace systems. These composites have potential for use in airbreathing engine components as well as aeronautical and space vehicle structures. Refractory wire-superalloy composites for use up to 2200 F or more and metal-matrix composites for lower temperature applications such as aerospace structures and turbojet fan and compressor blades are under investigation and are discussed. The development of a number of resin systems, including the polyimides and polyphenylquinoxalines, is described and their potential for use at temperatures approaching 315 C (600 F) is indicated. Various molecular modifications that improve processability and/or increase thermal and oxidative resistance of the resins are also described. Structural analysis methods are discussed for determining the stresses and deformations in complex composite systems. Consideration is also given to residual stresses resulting from the curing process and to the foreign object damage problem in fan blade applications.

Signorelli, R. A.↗
NASA NTRS1979

A model of smoldering combustion applied to flexible polyurethane foams

Smoldering combustion, particularly in upholstery and bedding materials, has been proven a serious life hazard. The simplest representation of this hazard situation is one-dimensional downward propagation of a smolder wave against a buoyant upflow (cocurrent smolder); the configuration treated here is identical in all respects to this except for the presence of a forced flow replacing the buoyant one. The complex degradation chemistry of the polyurethanes is here reduced to the two major overall reactions of char formation and char oxidation. The model solutions, which are in reasonable agreement with experimental results, show the smolder process to be oxygen-limited, which leads to some very simple trends. More subtle behavior aspects determine actual propagation velocity, fraction of fuel consumed, and apparent equivalence ratio (all of which are variable). The self-insulating character of the smolder wave makes it viable in a wide-ranging set of conditions if the igniting stimulus is sufficiently long. These results have significant implications regarding the problem of smolder prevention or hindrance.

Ohlemiller, T. J.↗