Search NASA⌕ Search

SEARCH · Search NASA

Results for “Complexation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29

Monitoring Airspace Complexity and Determining Contributing Factors

The national airspace has evolved over many years to accommodate increased traffic demand while simultaneously maintaining air travel as one of the safest forms of transportation. One of the reasons for this success is the ability of the air traffic control system and the operators to adapt and accommodate to situations that routinely disrupt normal operations. These situations may include: adverse weather, delays, early arrivals, equipment outages, and other factors that are outside the operators’ ability to control. These factors can lead to states where automation is unable to properly handle these issues, and therefore air traffic controllers and pilots have to intervene — ultimately increasing communication between operators resulting in higher workload. As controller workload increases to handle sub-optimal operating conditions, complexity increases. This is because, under these conditions humans are required to make tactical decisions in response to external factors. This results in a departure from the original strategic plan where operations would be more efficiently managed. Human operators manage airspace complexity under rigid regulations but in a constantly changing environment. The airspace is divided into sectors and the number of aircraft assigned to each controller is limited for safe handling. Some prior studies devised airspace complexity metrics in commercial aviation and related these metrics to controller workload. The upper bounds on the system load are pre-determined. Such bounds on complexity make for a safe system, but the system cannot scale and adapt to autonomous, dense, and heterogeneous traffic — including the many types of Unmanned Aerial Vehicles (UAVs) envisioned to be added to the operations. We hypothesize that, as traffic density and heterogeneity grow, and other key metrics change, there will be phase transitions at which the way traffic should be managed changes significantly. We offer a method for in-time detection of contributing factors that lead to phase transitions, characterized by increased complexity. To the best of our knowledge, there is no tool similar to ours that identifies such contributing factors or precursor patterns.

Precursor↗

Thermally stable manganese(Ⅲ) peroxido complexes with hindered N3 tripodal ligands: Structures and their physicochemical properties

Mononuclear manganese(III) peroxido complexes are candidates for the reaction intermediates in manganese containing proteins, such as manganese superoxide dismutase (Mn-SOD) etc. In this study, manganese(III) peroxido complexes [Mn(O 2 )(L3)] and [Mn(O 2 )(L10)] ligated by anionic N3 type ligands with sterically hindered substituents, hydrotris(3-tertiary butyl-5-isopropyl-1-pyrazolyl)borate (L3 - ) and hydrotris(3-adamantyl-5-isopropyl-1-pyrazolyl)borate (L10 - ), respectively, were structurally characterized. These complexes are the first examples of structurally characterized five-coordinate manganese(III) peroxido complexes. Their characteristic ν(O—O) and ν(Mn—O) stretchings were determined by using H 2 18 O 2 for the first time. Theoretical calculations were performed to obtain further insight into their structural parameters. The decomposed products were obtained as [{Mn III (μ-O)(L3)} 2 Mn IV ] and [Mn III (OH){L10(O)}] from [Mn(O 2 )(L3)] and [Mn(O 2 )(L10)], respectively.

59 BASIC BIOLOGICAL SCIENCES↗

Retractile lysyl-tRNA synthetase-AIMP2 assembly in the human multi-aminoacyl-tRNA synthetase complex

Multi-aminoacyl-tRNA synthetase complex (MSC) is the second largest machinery for protein synthesis in human cells and also regulates multiple nontranslational functions through its components. Prior studies have shown that the MSC can respond to external signals by releasing its components to function outside it. The internal assembly is fundamental to MSC regulation. Here, using crystal structural analyses (at 1.88 Å resolution) along with molecular modeling, gel-filtration chromatography, and co-immunoprecipitation, we report that human lysyl-tRNA synthetase (LysRS) forms a tighter assembly with the scaffold protein aminoacyl-tRNA synthetase complex-interacting multifunctional protein 2 (AIMP2) than previously observed. Wefound that two AIMP2 N-terminal peptides form an antiparallel scaffold and hold two LysRS dimers through four binding motifs and additional interactions. Of note, the four catalytic subunits of LysRS in the tightly assembled complex were all accessible for tRNA recognition. We further noted that two recently reported human disease-associated mutations conflict with this tighter assembly, cause LysRS release from the MSC, and inactivate the enzyme. These findings reveal a previously unknown dimension of MSC subcomplex assembly and suggest that the retractility of this complex may be critical for its physiological functions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The Synthesis and Structure of a Scandium Nitrate Hydroxy-Bridged Dimeric Complex Supported by Bipyridyl Ligands

The current discussion on whether scandium, yttrium and lanthanum should represent Group 3 in the Periodic Table or whether lutetium should replace lanthanum in the group has prompted us to further explore the structural chemistry of the Group 3 elements and compare the coordination numbers and coordination geometries adopted. The steric and electronic properties of the coordinated ligands have a major influence on the structures adopted. We report the synthesis and crystal structure determination of an unusual dinuclear scandium complex [(bipy)(NO 3 ) 2 Sc(µ-OH) 2 Sc(NO 3 ) 2 (bipy)] obtained by the reaction of hydrated scandium nitrate with 2,2'-bipyridyl (bipy) in either ethanol or nitromethane. The crystal structure of the complex shows that the scandium centers are eight coordinate, and the structure obtained contrasts with related complexes found in the lanthanide series [Ln(bipy) 2 (NO 3 ) 3 ] and [Ln(phen) 2 (NO 3 ) 3 ] (phen = phenanthroline) and in [M(terpy)(NO 3 ) 3 ] (M = Sc, Er–Lu), where these complexes are all mononuclear.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Facet-Dependent Water Inhibition of Alkanol Dehydration on TiO2 via Distinct Water–Alkanol Complexes

Water is ubiquitous in biomass-derived feeds, yet its molecular impact on oxygen-elimination reactions remains poorly understood, particularly for catalysts exposing different facets. Here, we utilize well-defined TiO2 nanocrystals with dominant (101) and (001) facets to reveal a pronounced facet-dependent effect of water, where inhibition for dehydration of isopropanol (IPA) on the TiO2(001) surface is about four times more severe than TiO2(101). Through a combination of in situ solid state NMR, in situ infrared spectroscopy, kinetics studies, and theoretical calculations, we demonstrate that this disparity arises from the formation of distinct alkanol-water complex intermediates. On TiO2(001), IPA undergoes dissociative adsorption to form an isopropoxide-H2O complex that readily drives the surface into a complex-dominated regime. This pathway increases the activation barrier for C–H cleavage by 40 kJ mol-1 by inducing a disordered transition state. In contrast, TiO2(101) favors molecular IPA adsorption with weak hydrogen bonding to water, resulting in a smaller complex formation constant and a much smaller activation barrier increase (25 kJ mol-1). By quantitatively linking facet-dependent complex coverage to transition-state destabilization, this work moves beyond simple site-blocking models and provides a conceptual framework for designing catalysts that remain active in water-containing environments

Hu, Wenda↗

Synthesis and Structure of Uranium‐Silylene Complexes

Abstract While carbene complexes of uranium have been known for over a decade, there are no reported examples of complexes between an actinide and a „heavy carbene.“ Herein, we report the syntheses and structures of the first uranium‐heavy tetrylene complexes: (CpSiMe 3 ) 3 U‐Si[PhC(NR) 2 ]R’ (R= t Bu, R’=NMe 2 1 ; R= i Pr, R’=PhC(N i Pr) 2 2 ). Complex 1 features a kinetically robust uranium‐silicon bonding interaction, while the uranium‐silicon bond in 2 is easily disrupted thermally or by competing ligands in solution. Calculations reveal polarized σ bonds, but depending on the substituents at silicon a substantial π‐bonding interaction is also present. The complexes possess relatively high bond orders which suggests primarily covalent bonding between uranium and silicon. These results comprise a new frontier in actinide‐heavy main‐group bonding.

Brackbill, I. Joseph↗

Synthesis and Characterization of a Masked Terminal Nickel-Oxide Complex

In exploring terminal nickel-oxo complexes, postulated to be the active oxidant in natural and non-natural oxidation reactions, we report the synthesis of the pseudo-trigonal bipyramidal Ni II complexes (K)[Ni II (L Ph )(DMF)] (1[DMF]) and (NMe 4 ) 2 [Ni II (L Ph )(OAc)] (1[OAc]) (L Ph =2,2’,2’’-nitrilo-tris-(N-phenylacetamide); DMF=N,N-dimethylformamide; - OAc=acetate). Both complexes were characterized using NMR, FTIR, ESI-MS, and X-ray crystallography, showing the L Ph ligand to bind in a tetradentate fashion, together with an ancillary donor. The reaction of 1[OAc] with peroxyphenyl acetic acid (PPAA) resulted in the formation of [(L Ph )Ni III -O-H∙∙∙OAc] 2- , 2, that displays many of the characteristics of a terminal Ni=O species. 2 was characterized by UV-Vis, EPR, and XAS spectroscopies and ESI-MS. 2 decayed to yield a Ni II -phenolate complex 3 (through aromatic electrophilic substitution) that was characterized by NMR, FTIR, ESI-MS, and X-ray crystallography. 2 was capable of hydroxylation of hydrocarbons and epoxidation of olefins, as well as oxygen atom transfer oxidation of phosphines at exceptional rates. While the oxo-wall remains standing, this complex represents an excellent example of a masked metal-oxide that displays all of the properties expected of the ever elusive terminal M=O beyond the oxo-wall.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Heteroleptic Square Planar Cobalt(I/II) Complexes

Reduction of the cobalt(II) chloride complex, Ph 2 B( t BuIm) 2 Co(THF)Cl (1) in the presence of t BuN≡C affords the diamagnetic, square planar cobalt(I) complex Ph 2 B( t BuIm) 2 Co(C≡N t Bu) 2 (2). This is a rare example of a 16-electron cobalt(I) complex that is structurally related to square planar noble metal complexes. Accordingly, the electronic structure of 2, as calculated by DFT, reveals that the HOMO is largely d z 2 in character. Complex 2 is readily oxidized to its cobalt(II) congener [Ph 2 B( t BuIm) 2 Co(C=N t Bu) 2 ]BPh 4 (3-BPh 4 ), whose EPR spectral parameters are characteristic of low-spin d 7 with an unpaired electron in an orbital of d z 2 parentage. Further, this is also consistent with the results of DFT calculations. Despite its 16-electron configuration and the d z 2 parentage of the HOMO, the only tractable reactions of 2 involve one electron oxidation to afford 3.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structural Changes to the Gd‐DTPA Complex at Varying Ligand Protonation State

Abstract Diethylenetriaminepentaacetic acid (DTPA) is a chelating agent whose complex with the Gd 3+ ion is used in medical imaging. DTPA is also used in lanthanide‐actinide separation processes. As protonation of the DTPA ligand can facilitate dissociation of the Gd 3+ ion from the Gd‐DTPA complex, this work investigates the coordination structures of the aqueous Gd 3+ ion and its environment when chelated by DTPA in eight different DTPA protonation states. Both classical and ab initio molecular dynamics (MD) simulations are conducted to model the solvated complexes. Extended X‐ray absorption fine structure (EXAFS) measurements of the Gd 3+ aqua ion, and the Gd‐DTPA complex at pH 1 and 11, are compared to EXAFS spectra predicted from the MD simulations to verify the accuracy of the MD structures. The findings of this work provide atomic‐level details into the fluctuating Gd‐DTPA complex environment as the DTPA ligand gradually detaches from the Gd 3+ ion with increased protonation.

Chemistry↗

Comparing π‐complexation capabilities of ionic liquids containing silver(I) and copper(I) ions by headspace single drop microextraction in combination with high‐performance liquid chromatography

Selective π‐complexation capabilities of silver(I) and copper(I) ions can be effectively facilitated in ionic liquids. To understand the effects of environmental factors that influence the π‐complexation of these metal ions with analytes, techniques that employ small volumes of ionic liquid that can be readily analyzed are desired. In this study, headspace single drop microextraction coupled with HPLC is used to investigate a diverse set of environmental factors on the metal ion‐mediated complexation with aromatic compounds in ionic liquid media. Silver(I) and copper(I) bis[(trifluoromethyl)sulfonyl]imide salts were both studied by dissolving them in the 1‐decyl‐3‐methylimidazolium bis[(trifluoromethyl)sulfonyl]imide ionic liquid and employing the mixture as extraction media for aromatic compounds. Water and acetonitrile within the sample solution were observed to interfere with the complexation of silver(I) ions and aromatic compounds, while ethylene glycol and triethylene glycol did not. The temperature and extraction times were optimized to fully facilitate the π‐complexation capabilities of metal ions in ionic liquid media. Partition coefficients between the sample headspace and metal ion were determined using a three‐phase equilibria model. Although no discernable difference in analyte partitioning between the headspace and ionic liquid solvent was observed, analyte partition coefficients to silver(I) ion tended to be greater compared to copper(I) ion.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Binding complexity and multiparty entanglement

We introduce “binding complexity”, a new notion of circuit complexity which quantifies the difficulty of distributing entanglement among multiple parties, each consisting of many local degrees of freedom. We define binding complexity of a given state as the minimal number of quantum gates that must act between parties to prepare it. To illustrate the new notion we compute it in a toy model for a scalar field theory, using certain multiparty entangled states which are analogous to configurations that are known in AdS/CFT to correspond to multiboundary wormholes. Pursuing this analogy, we show that our states can be prepared by the Euclidean path integral in (0 + 1)-dimensional quantum mechanics on graphs with wormhole-like structure. We compute the binding complexity of our states by adapting the Euler-Arnold approach to Nielsen’s geometrization of gate counting, and find a scaling with entropy that resembles a result for the interior volume of holographic multiboundary wormholes. We also compute the binding complexity of general coherent states in perturbation theory, and show that for “double-trace deformations” of the Hamiltonian the effects resemble expansion of a wormhole interior in holographic theories.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Image Fusion Guidance for In Situ Laser Fenestration of Aortic Stent graft for Endovascular Repair of Complex Aortic Aneurysm: Feasibility, Efficacy and Overall Functional Success

Objective: To evaluate feasibility, efficacy and overall functional success of image fusion guidance during laser-assisted in situ fenestration of aortic stent graft (LISFAS) for endovascular repair of complex aortic aneurysm (complex-EVAR) in a prospective study. Methods: Between September 2016 and July 2018, 20 patients were included and treated with LISFAS for complex-EVAR. Aortic aneurysms were either para-renal (n = 15) or thoraco-abdominal (n = 5) with 57 mm [first quartile: 54; third quartile: 68] median aneurysm diameter in 69 years [68;78] patients. All interventions were performed using the same angiographic system and 3D image fusion software for overlying pre-intervention CTA on per-intervention 2D fluoroscopy with cone-beam CT images to display target vessels ostia. Results: LISFAS for complex-EVAR with image fusion was performed in all patients, and no endovascular intervention required conversion to an open aortic repair. LISFAS of all target vessels was feasible in 18 patients (90%); 48 fenestrations out of 50 were performed successfully. Two fenestrations failed for renal arteries in two patients. Median ischemic times were as follows: 34 min [25;43] for superior mesenteric artery; 69 min [56;83] for left renal artery; 73 min [36;102] for right renal artery; and 93 min [89;96] for the celiac trunk. Median intervention and fluoroscopy times, iodinated contrast volume and X-ray exposure were 180 min [150;180], 74 min [64;87], 80 mL [59;113] and 338 Gy.cm{sup 2} [259;495], respectively. Efficacy was found in 17 patients (85%) on one-week follow-up CTA: Two patients had type 1 and 3 endoleaks, respectively, that were successfully embolized. Overall functional success was 90%. Median hospitalization stay was 9 days [8, 17]. The 30-day safety analysis was 90% (n = 2 deaths) owing to an undetermined cause and to bowel ischemia after low flow in intensive care unit. Conclusions: LISFAS using image fusion was feasible, efficient and overall functionally successful for complex-EVAR in this preliminary study.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Interpreting the Lipidome: Bioinformatic Approaches to Embrace the Complexity

Background Improvements in mass spectrometry (MS) technologies coupled with bioinformatics developments have allowed considerable advancement in the measurement and interpretation of lipidomics data in recent years. Since research areas employing lipidomics are rapidly increasing, there is a great need for bioinformatic tools that capture and utilize the complexity of the data. Currently, the diversity and complexity within the lipidome is often concealed by summing over or averaging individual lipids up to (sub)class-based descriptors, losing valuable information about biological function and interactions with other distinct lipids molecules, proteins and/or metabolites. Aim of review To address this gap in knowledge, novel bioinformatics methods are needed to improve identification, quantification, integration and interpretation of lipidomics data. The purpose of this mini-review is to summarize exemplary methods to explore the complexity of the lipidome. Key scientific concepts of review Here we describe six approaches that capture three core focus areas for lipidomics: (1) lipidome annotation including a resolvable database identifier, (2) interpretation via pathway- and enrichment-based methods, and (3) understanding complex interactions to emphasize specific steps in the analytical process and highlight challenges in analyses associated with the complexity of lipidome data.

Kyle, Jennifer E.↗

Formation Mechanism and Nucleation Effect of Ti{sub 2}O{sub 3}–TiN Complex Nucleus at Solidification Front of 18Cr Ferritic Stainless Steel

Formation mechanism of Ti{sub 2}O{sub 3}–TiN complex nucleus and its nucleation effect on δ-Fe at solidification front of Fe-18Cr ferritic stainless steel was investigated through experimental and theoretical methods. According to the equilibrium calculation, Ti{sub 2}O{sub 3} will crystallize in the molten steel before solidification and TiN will not form until the solid phases appear. However, complex nucleus and equiaxed grains exist in the edge of Ti-bearing ingot, where the solidification velocity and temperature gradient are high. Therefore, complex nucleus is indicated to be formed at solidification front and a non-equilibrium solidification model for multi-component alloy was established to investigate the dendrite tip interface phenomenon. The calculation results exhibit an element enrichment at solidification front and explain well with the formation of complex nucleus before solidification. It is also found that there is approximate lattice matching between TiN, and Ti{sub 2}O{sub 3}, δ-Fe on the basis of disregistry theory. These results are consistent with the observed complex nucleus and the increased equiaxed zone ratio (EZR) of Ti-bearing ferritic stainless steel.

36 MATERIALS SCIENCE↗

Structure and Conformational Dynamics of a COMPASS Histone H3K4 Methyltransferase Complex

The methylation of histone 3 lysine 4 (H3K4) is carried out by an evolutionarily conserved family of methyltransferases referred to as complex of proteins associated with Set1 (COMPASS). The activity of the catalytic SET domain (su(var)3-9, enhancer-of-zeste, and trithorax) is endowed through forming a complex with a set of core proteins that are widely shared from yeast to humans. We obtained cryo-electron microscopy (cryo-EM) maps of the yeast Set1/COMPASS core complex at overall 4.0- to 4.4-Å resolution, providing insights into its structural organization and conformational dynamics. The Cps50 C-terminal tail weaves within the complex to provide a central scaffold for assembly. The SET domain, snugly positioned at the junction of the Y-shaped complex, is extensively contacted by Cps60 (Bre2), Cps50 (Swd1), and Cps30 (Swd3). Here, the mobile SET-I motif of the SET domain is engaged by Cps30, explaining its key role in COMPAS catalytic activity toward higher H3K4 methylation states.

59 BASIC BIOLOGICAL SCIENCES↗

Selective transport of light vs. heavy rare earth elements by sulfate/bisulfate complexes in hydrothermal fluids

Here, this study explores the transport of rare earth elements (REE) in acidic sulfate-bearing hydrothermal fluids and the implications for the fractionation of light/heavy REE in critical mineral deposits. The speciation of Nd (light REE) and Yb (heavy REE) sulfate complexes were determined via in situ Raman spectroscopy using fused SiO 2 capillary cells up to 300 ºC at saturated water vapor pressure and in a hydrothermal diamond anvil cell up to 500 ºC and 540 MPa. The REE monosulfate (REESO 4 + ) and REE disulfate (REE(SO 4 ) 2 - ) species are stable below 150 to 250 ºC but become less stable at higher temperatures, particularly the light REE, due to the decreased solubility of REE sulfate solids. At higher pressure, these REE sulfate complexes display an increased stability field up to 400 ℃. The REE bisulfate complex (REEHSO 4 2+ ) was identified with a wide stability field below 400 ºC for the HREE in acidic Yb 2 (SO 4 ) 3 -bearing solutions, whereas in Nd 2 (SO 4 ) 3 -bearing solutions, the LREE bisulfate complex is restricted to below 100 ℃. These results suggest that bisulfate is a previously unrecognized selective ligand for heavy REE transport at low temperature in acidic oxidized hydrothermal fluids. Such fluids are responsible for hydrothermal alteration in many REE deposits. Prediction of phase stabilities across pressure, temperature, and composition space (P-T- x ) is crucial for predicting the role of aqueous REE sulfate complexes in the mobilization of REE in crustal fluids.

58 GEOSCIENCES↗

Homoleptic 1,2-benzenedithiolate complexes of thorium and uranium

Reaction of 4 equiv. of [Li(TMEDA)] 2 [1,2-S 2 C 6 H 4 ] with [ThCl 4 (DME) 2 ] or [UCl 4 (THF) 3 ] in THF results in formation of [Li(THF) 2 ] 4 [An(1,2-S 2 C 6 H 4 ) 4 ] (An = Th, 1; An = U, 2), whereas reaction of 4 equiv. of [Li(TMEDA)] 2 [1,2-S 2 C 6 H 4 ] with UCl 4 in Et 2 O results in formation of [Li(TMEDA)] 4 [U(1,2-S 2 C 6 H 4 ) 4 ] (3). Complexes 1–3 represent the first reported benzenedithiolate complexes of the actinides. Here, they were characterized by NMR spectroscopy and X-ray crystallography. In the solid state, complexes 1–3 exhibit triangular dodecahedral geometries about their actinide centers. Additionally, their Li + cations are bound by two sulfur atoms of adjacent [1,2-S 2 C 6 H 4 ] 2− ligands, in addition to two solvent donor atoms. In solution, complexes 2 and 3 exhibit spectral data consistent with S 4 symmetry (and non-exchanging Li + sites), whereas complex 1 exhibits spectral properties consistent with labile Li + cations.

X-ray↗

Structure of the antenna complex expressed during far-red light photoacclimation in Synechococcus sp. PCC 7335

Far-red light photoacclimation, or FaRLiP, is a facultative response exhibited by some cyanobacteria that allows them to absorb and utilize lower energy light (700–800 nm) than the wavelengths typically used for oxygenic photosynthesis (400–700 nm). During this process, three essential components of the photosynthetic apparatus are altered: photosystem I, photosystem II, and the phycobilisome. In all three cases, at least some of the chromophores found in these pigment–protein complexes are replaced by chromophores that have red-shifted absorbance relative to the analogous complexes produced in visible light. Recent structural and spectroscopic studies have elucidated important features of the two photosystems when altered to absorb and utilize far-red light, but much less is understood about the modified phycobiliproteins made during FaRLiP. We used single-particle, cryo-EM to determine the molecular structure of a phycobiliprotein core complex comprising allophycocyanin variants that absorb far-red light during FaRLiP in the marine cyanobacterium Synechococcus sp. PCC 7335. The structure reveals the arrangement of the numerous red-shifted allophycocyanin variants and the probable locations of the chromophores that serve as the terminal emitters in this complex. It also suggests how energy is transferred to the photosystem II complexes produced during FaRLiP. The structure additionally allows comparisons with other previously studied allophycocyanins to gain insights into how phycocyanobilin chromophores can be tuned to absorb far-red light. These studies provide new insights into how far-red light is harvested and utilized during FaRLiP, a widespread cyanobacterial photoacclimation mechanism.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗