Search NASA⌕ Search

SEARCH · Search NASA

Results for “Computer simulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Evaluation of phase shifts for nonrelativistic elastic scattering using quantum computers

Simulations of scattering processes are essential in understanding the physics of our universe. Computing relevant scattering quantities from ab initio methods is extremely difficult on classical devices because of the substantial computational resources needed. Here, this work reports the development of an algorithm that makes it possible to obtain phase shifts for generic nonrelativistic elastic scattering processes on a quantum computer. This algorithm is based on extracting phase shifts from the direct implementation of the real-time evolution. The algorithm is improved by a variational procedure making it more accurate and resistant to the quantum noise. The reliability of the algorithm is first demonstrated by means of classical numerical simulations for different potentials and later tested on existing quantum hardware, specifically on IBM quantum processors.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
NASA NTRS1995

An equivalent body surface charge model representing three-dimensional bioelectrical activity

A new surface-source model has been developed to account for the bioelectrical potential on the body surface. A single-layer surface-charge model on the body surface has been developed to equivalently represent bioelectrical sources inside the body. The boundary conditions on the body surface are discussed in relation to the surface-charge in a half-space conductive medium. The equivalent body surface-charge is shown to be proportional to the normal component of the electric field on the body surface just outside the body. The spatial resolution of the equivalent surface-charge distribution appears intermediate between those of the body surface potential distribution and the body surface Laplacian distribution. An analytic relationship between the equivalent surface-charge and the surface Laplacian of the potential was found for a half-space conductive medium. The effects of finite spatial sampling and noise on the reconstruction of the equivalent surface-charge were evaluated by computer simulations. It was found through computer simulations that the reconstruction of the equivalent body surface-charge from the body surface Laplacian distribution is very stable against noise and finite spatial sampling. The present results suggest that the equivalent body surface-charge model may provide an additional insight to our understanding of bioelectric phenomena.

NASA Discipline Regulatory Physiology↗
NASA NTRS1986

Computational composite mechanics for aerospace propulsion structures

Specialty methods are presented for the computational simulation of specific composite behavior. These methods encompass all aspects of composite mechanics, impact, progressive fracture and component specific simulation. Some of these methods are structured to computationally simulate, in parallel, the composite behavior and history from the initial fabrication through several missions and even to fracture. Select methods and typical results obtained from such simulations are described in detail in order to demonstrate the effectiveness of computationally simulating (1) complex composite structural behavior in general and (2) specific aerospace propulsion structural components in particular.

Chamis, C. C.↗
NASA NTRS1987

Computational composite mechanics for aerospace propulsion structures

Specialty methods are presented for the computational simulation of specific composite behavior. These methods encompass all aspects of composite mechanics, impact, progressive fracture and component specific simulation. Some of these methods are structured to computationally simulate, in parallel, the composite behavior and history from the initial frabrication through several missions and even to fracture. Select methods and typical results obtained from such simulations are described in detail in order to demonstrate the effectiveness of computationally simulating: (1) complex composite structural behavior in general, and (2) specific aerospace propulsion structural components in particular.

Chamis, Christos C.↗
NASA NTRS1986

Computational engine structural analysis

A significant research activity at the NASA Lewis Research Center is the computational simulation of complex multidisciplinary engine structural problems. This simulation is performed using computational engine structural analysis (CESA) which consists of integrated multidisciplinary computer codes in conjunction with computer post-processing for problem-specific application. A variety of the computational simulations of specific cases are described in some detail in this paper. These case studies include: (1) aeroelastic behavior of bladed rotors, (2) high velocity impact of fan blades, (3) blade-loss transient response, (4) rotor/stator/squeeze-film/bearing interaction, (5) blade-fragment/rotor-burst containment, and (6) structural behavior of advanced swept turboprops. These representative case studies are selected to demonstrate the breath of the problems analyzed and the role of the computer including post-processing and graphical display of voluminous output data.

Chamis, C. C.↗
NASA NTRS1986

Computational engine structural analysis

A significant research activity at the NASA Lewis Research Center is the computational simulation of complex multidisciplinary engine structural problems. This simulation is performed using computational engine structural analysis (CESA) which consists of integrated multidisciplinary computer codes in conjunction with computer post-processing for problem-specific application. A variety of the computational simulations of specific cases are described in some detail in this paper. These case studies include: (1) aeroelastic behavior of bladed rotors, (2) high velocity impact of fan blades, (3) blade-loss transient response, (4) rotor/stator/squeeze-film/bearing interaction, (5) blade-fragment/rotor-burst containment, and (6) structural behavior of advanced swept turboprops. These representative case studies are selected to demonstrate the breath of the problems analyzed and the role of the computer including post-processing and graphical display of voluminous output data.

Chamis, C. C.↗
NASA NTRS1977

High frequency dynamic engine simulation

A digital computer simulation of a mixed flow, twin spool turbofan engine was assembled to evaluate and improve the dynamic characteristics of the engine simulation to disturbance frequencies of at least 100 Hz. One dimensional forms of the dynamic mass, momentum and energy equations were used to model the engine. A TF30 engine was simulated so that dynamic characteristics could be evaluated against results obtained from testing of the TF30 engine at the NASA Lewis Research Center. Dynamic characteristics of the engine simulation were improved by modifying the compression system model. Modifications to the compression system model were established by investigating the influence of size and number of finite dynamic elements. Based on the results of this program, high frequency engine simulations using finite dynamic elements can be assembled so that the engine dynamic configuration is optimum with respect to dynamic characteristics and computer execution time. Resizing of the compression systems finite elements improved the dynamic characteristics of the engine simulation but showed that additional refinements are required to obtain close agreement simulation and actual engine dynamic characteristics.

Schuerman, J. A.↗
NASA NTRS1973

An empirical analysis of the distribution of overshoots in a stationary Gaussian stochastic process

The frequency distribution of overshoots in a stationary Gaussian stochastic process is analyzed. The primary processes involved in this analysis are computer simulation and statistical estimation. Computer simulation is used to simulate stationary Gaussian stochastic processes that have selected autocorrelation functions. An analysis of the simulation results reveals a frequency distribution for overshoots with a functional dependence on the mean and variance of the process. Statistical estimation is then used to estimate the mean and variance of a process. It is shown that for an autocorrelation function, the mean and the variance for the number of overshoots, a frequency distribution for overshoots can be estimated.

Carter, M. C.↗
NASA NTRS1986

Studying Transonic Gases With a Hydraulic Analog

Water table for hydraulic-flow research yields valuable information about gas flow at transonic speeds. Used to study fuel and oxidizer flow in high-pressure rocket engines. Method applied to gas flows in such equipment as furnaces, nozzles, and chemical lasers. Especially suitable when wall contours nonuniform, discontinuous, or unusually shaped. Wall shapes changed quickly for study and evaluated on spot. Method used instead of computer simulation when computer models unavailable, inaccurate, or costly to run.

Wagner, W.↗
NASA NTRS1992

A numerical investigation of hydrogen combustion in Mach 2 flow

A numerical study is conducted of a reacting flowfield generated by a single hydrogen jet injected transversely behind a rearward facing step. A nonreacting mixing study was followed by a reacting simulation. The computation simulates a current experimental condition. The validation of the numerical solution was limited to a comparison of the wall-pressure distribution along the wall. The comparison indicates agreement between the experiment and the prediction with a maximum error of 7 percent. The addition of the reaction responsible for HO2 production (H + O2 + M = HO2 + M) to an initially simplified chemical mechanism reduced the exponential growth of the free radicals and reduced the amount of heat released by combustion; as a result, the flowfield was significantly changed. A reversed flow was obtained in limited regions of the flow.

Segal, Corin↗
NASA NTRS2014

Computational Aerodynamic Simulations of a 1215 ft/sec Tip Speed Transonic Fan System Model for Acoustic Methods Assessment and Development

Computational Aerodynamic simulations of a 1215 ft/sec tip speed transonic fan system were performed at five different operating points on the fan operating line, in order to provide detailed internal flow field information for use with fan acoustic prediction methods presently being developed, assessed and validated. The fan system is a sub-scale, low-noise research fan/nacelle model that has undergone extensive experimental testing in the 9- by 15-foot Low Speed Wind Tunnel at the NASA Glenn Research Center. Details of the fan geometry, the computational fluid dynamics methods, the computational grids, and various computational parameters relevant to the numerical simulations are discussed. Flow field results for three of the five operating points simulated are presented in order to provide a representative look at the computed solutions. Each of the five fan aerodynamic simulations involved the entire fan system, which for this model did not include a split flow path with core and bypass ducts. As a result, it was only necessary to adjust fan rotational speed in order to set the fan operating point, leading to operating points that lie on a fan operating line and making mass flow rate a fully dependent parameter. The resulting mass flow rates are in good agreement with measurement values. Computed blade row flow fields at all fan operating points are, in general, aerodynamically healthy. Rotor blade and fan exit guide vane flow characteristics are good, including incidence and deviation angles, chordwise static pressure distributions, blade surface boundary layers, secondary flow structures, and blade wakes. Examination of the flow fields at all operating conditions reveals no excessive boundary layer separations or related secondary-flow problems.

Tweedt, Daniel L.↗
NASA NTRS1980

The analysis of delays in simulator digital computing systems. Volume 1: Formulation of an analysis approach using a central example simulator model

The effects of spurious delays in real time digital computing systems are examined. Various sources of spurious delays are defined and analyzed using an extant simulator system as an example. A specific analysis procedure is set forth and four cases are viewed in terms of their time and frequency domain characteristics. Numerical solutions are obtained for three single rate one- and two-computer examples, and the analysis problem is formulated for a two-rate, two-computer example.

Heffley, R. K.↗
NASA NTRS1994

Learning fuzzy logic control system

The performance of the Learning Fuzzy Logic Control System (LFLCS), developed in this thesis, has been evaluated. The Learning Fuzzy Logic Controller (LFLC) learns to control the motor by learning the set of teaching values that are generated by a classical PI controller. It is assumed that the classical PI controller is tuned to minimize the error of a position control system of the D.C. motor. The Learning Fuzzy Logic Controller developed in this thesis is a multi-input single-output network. Training of the Learning Fuzzy Logic Controller is implemented off-line. Upon completion of the training process (using Supervised Learning, and Unsupervised Learning), the LFLC replaces the classical PI controller. In this thesis, a closed loop position control system of a D.C. motor using the LFLC is implemented. The primary focus is on the learning capabilities of the Learning Fuzzy Logic Controller. The learning includes symbolic representation of the Input Linguistic Nodes set and Output Linguistic Notes set. In addition, we investigate the knowledge-based representation for the network. As part of the design process, we implement a digital computer simulation of the LFLCS. The computer simulation program is written in 'C' computer language, and it is implemented in DOS platform. The LFLCS, designed in this thesis, has been developed on a IBM compatible 486-DX2 66 computer. First, the performance of the Learning Fuzzy Logic Controller is evaluated by comparing the angular shaft position of the D.C. motor controlled by a conventional PI controller and that controlled by the LFLC. Second, the symbolic representation of the LFLC and the knowledge-based representation for the network are investigated by observing the parameters of the Fuzzy Logic membership functions and the links at each layer of the LFLC. While there are some limitations of application with this approach, the result of the simulation shows that the LFLC is able to control the angular shaft position of the D.C. motor. Furthermore, the LFLC has better performance in rise time, settling time and steady state error than to the conventional PI controller. This abstract accurately represents the content of the candidate's thesis. I recommend its publication.

Lung, Leung Kam↗
NASA NTRSDate not supplied

Downfolding Complex Materials Problems Onto Model Hamiltonians for Quantum Computers

Simulating the properties of quantum materials is expected to be one of the exciting applications for quantum computers and where we hope to see advantages over classical hardware. The complexity of ab initio Hamiltonians describing the physics of application-relevant materials places them beyond the realm of possibility for solution on near-term hardware with a limited number of qubits. Various Hamiltonian approximations, including Hamiltonian downfolding, offers a possibility towards simulating complex materials on near-term hardware. This is accomplished by approximating the relevant physics of a given material through their representation by simpler model Hamiltonians, such as the Hubbard Hamiltonian or extensions of it. Here we employ a well-defined first-principles methodology for deriving downfolded multi-band extended Hubbard Hamiltonians of materials, capturing strong electronic correlation and electron-phonon coupling, based on the formalism of Wannier functions and the calculation of the screened Coulomb interaction. We demonstrate for a variety of systems that quantum simulation of these downfolded Hamiltonians reproduces key properties, thus establishing downfolding as a promising route to achieve near-term simulation of application-relevant systems on quantum hardware.

Antonios Markos Alvertis↗
NASA NTRSDate not supplied

Downfolding complex materials problems onto model Hamiltonians for quantum computers

Simulating the properties of quantum materials is expected to be one of the exciting applications for quantum computers and where we hope to see advantages over classical hardware. The complexity of ab initio Hamiltonians describing the physics of application-relevant materials places them beyond the realm of possibility for solution on near-term hardware with a limited number of qubits. Various Hamiltonian approximations, including Hamiltonian downfolding, offers a possibility towards simulating complex materials on near-term hardware. This is accomplished by approximating the relevant physics of a given material through their representation by simpler model Hamiltonians, such as the Hubbard Hamiltonian or extensions of it. Here we employ a well-defined first-principles methodology for deriving downfolded multi-band extended Hubbard Hamiltonians of materials, capturing strong electronic correlation and electron-phonon coupling, based on the formalism of Wannier functions and the calculation of the screened Coulomb interaction. We demonstrate for a variety of systems that quantum simulation of these downfolded Hamiltonians reproduces key properties, thus establishing downfolding as a promising route to achieve near-term simulation of application-relevant systems on quantum hardware.

Antonios M. Alvertis↗
NASA NTRS1991

Probabilistic composite analysis

Formal procedures are described which are used to computationally simulate the probabilistic behavior of composite structures. The computational simulation starts with the uncertainties associated with all aspects of a composite structure (constituents, fabrication, assembling, etc.) and encompasses all aspects of composite behavior (micromechanics, macromechanics, combined stress failure, laminate theory, structural response, and tailoring) optimization. Typical cases are included to illustrate the formal procedure for computational simulation. The collective results of the sample cases demonstrate that uncertainties in composite behavior and structural response can be probabilistically quantified.

Chamis, C. C.↗
DOE OSTI2024

Quantum Computing and Simulations for Energy Applications

While quantum computing (QC) is considered as a paradigm shift in our basic understanding of physical computation, effective implementation of QC in energy applications also depends on progress and development in the dimensions of both QC hardware and algorithms. To fully address the status and future challenges of QC applied within the energy sector, in this presentation, we firstly summarize recent advancements on the applications of QC to energy infrastructure and materials, complex energy system processes, advanced manufacturing, and energy system security. Then, we will demonstrate the results of QC performed both on a simulator and a quantum device targeting on energy-related applications.

Paudel, Hari P.↗