Search NASA⌕ Search

SEARCH · Search NASA

Results for “Data Distribution Service”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29

The Modeling and Simulation Catalog for Discovery, Knowledge and Reuse

The DoD M&S Steering Committee has noted that the current DoD and Service's modeling and simulation resource repository (MSRR) services are not up-to-date limiting their value to the using communities. However, M&S leaders and managers also determined that the Department needs a functional M&S registry card catalog to facilitate M&S tool and data visibility to support M&S activities across the DoD. The M&S Catalog will discover and access M&S metadata maintained at nodes distributed across DoD networks in a centrally managed, decentralized process that employs metadata collection and management. The intent is to link information stores, precluding redundant location updating. The M&S Catalog uses a standard metadata schemas based on the DoD's Net-Centric Data Strategy Community of Interest metadata specification. The Air Force, Navy and OSD (CAPE) have provided initial information to participating DoD nodes, but plans on the horizon are being made to bring in hundreds of source providers.

Stone, George F. III↗

Statistical analysis of mission profile parameters of civil transport airplanes

The statistical analysis of flight times as well as airplane gross weights and fuel weights of jet-powered civil transport airplanes has shown that the distributions of their frequency of occurrence per flight can be presented approximately in general form. Before, however, these results may be used during the project stage of an airplane for defining a typical mission profile (the parameters of which are assumed to occur, for example, with a probability of 50 percent), the following points have to be taken into account. Because the individual airplanes were rotated during service, the scatter between the distributions of mission profile parameters for airplanes of the same type, which were flown with similar payload, has proven to be very small. Significant deviations from the generalized distributions may occur if an operator uses one airplane preferably on one or two specific routes. Another reason for larger deviations could be that the maintenance services of the operators of the observed airplanes are not representative of other airlines. Although there are indications that this is unlikely, similar information should be obtained from other operators. Such information would improve the reliability of the data.

Buxbaum, O.↗

Analyses of earth radiation budget data from unrestricted broadband radiometers on the ESSA 7 satellite

Six months of data from the wide-field-of-view low resolution infrared radiometers on the Environmental Science Services Administration (ESSA) 7 satellite were analyzed. Earth emitted and earth reflected irradiances were computed at satellite altitude using data from a new in-flight calibration technique. Flux densitites and albedos were computed for the top of the earth's atmosphere. Monthly averages of these quantities over 100 latitude zones, each hemisphere, and the globe are presented for each month analyzed, and global distributions are presented for typical months. Emitted flux densities are generally lower and albedos higher than those of previous studies. This may be due, in part, to the fact that the ESSA 7 satellite was in a 3 p.m. Sun-synchronous orbit and some of the comparison data were obtained from satellites in 12 noon sun-synchronous orbits. The ESSA 7 detectors seem to smooth out spatial flux density variations more than scanning radiometers or wide-field-of-view fixed-plate detectors. Significant longitudinal and latitudinal variations of emitted flux density and albedo were identified in the tropics in a zone extending about + or - 25 deg in latitude.

Weaver, W. L.↗

A method for developing design diagrams for ceramic and glass materials using fatigue data

The service lifetime of glass and ceramic materials can be expressed as a plot of time-to-failure versus applied stress whose plot is parametric in percent probability of failure. This type of plot is called a design diagram. Confidence interval estimates for such plots depend on the type of test that is used to generate the data, on assumptions made concerning the statistical distribution of the test results, and on the type of analysis used. This report outlines the development of design diagrams for glass and ceramic materials in engineering terms using static or dynamic fatigue tests, assuming either no particular statistical distribution of test results or a Weibull distribution and using either median value or homologous ratio analysis of the test results.

Heslin, T. M.↗

Applications of CCSDS recommendations to Integrated Ground Data Systems (IGDS)

This paper describes an application of the CCSDS Principle Network (CPH) service model to communications network elements of a postulated Integrated Ground Data System (IGDS). Functions are drawn principally from COSMICS (Cosmic Information and Control System), an integrated space control infrastructure, and the Earth Observing System Data and Information System (EOSDIS) Core System (ECS). From functional requirements, this paper derives a set of five communications network partitions which, taken together, support proposed space control infrastructures and data distribution systems. Our functional analysis indicates that the five network partitions derived in this paper should effectively interconnect the users, centers, processors, and other architectural elements of an IGDS. This paper illustrates a useful application of the CCSDS (Consultive Committee for Space Data Systems) Recommendations to ground data system development.

Mizuta, Hiroshi↗

Evolutionary Telemetry and Command Processor (TCP) architecture

A low cost, modular, high performance, and compact Telemetry and Command Processor (TCP) is being built as the foundation of command and data handling subsystems for the next generation of satellites. The TCP product line will support command and telemetry requirements for small to large spacecraft and from low to high rate data transmission. It is compatible with the latest TDRSS, STDN and SGLS transponders and provides CCSDS protocol communications in addition to standard TDM formats. Its high performance computer provides computing resources for hosted flight software. Layered and modular software provides common services using standardized interfaces to applications thereby enhancing software re-use, transportability, and interoperability. The TCP architecture is based on existing standards, distributed networking, distributed and open system computing, and packet technology. The first TCP application is planned for the 94 SDIO SPAS 3 mission. The architecture enhances rapid tailoring of functions thereby reducing costs and schedules developed for individual spacecraft missions.

Schneider, John R.↗

Aggregation Tool to Create Curated Data albums to Support Disaster Recovery and Response

Despite advances in science and technology of prediction and simulation of natural hazards, losses incurred due to natural disasters keep growing every year. Natural disasters cause more economic losses as compared to anthropogenic disasters. Economic losses due to natural hazards are estimated to be around $6-$10 billion dollars annually for the U.S. and this number keeps increasing every year. This increase has been attributed to population growth and migration to more hazard prone locations such as coasts. As this trend continues, in concert with shifts in weather patterns caused by climate change, it is anticipated that losses associated with natural disasters will keep growing substantially. One of challenges disaster response and recovery analysts face is to quickly find, access and utilize a vast variety of relevant geospatial data collected by different federal agencies such as DoD, NASA, NOAA, EPA, USGS etc. Some examples of these data sets include high spatio-temporal resolution multi/hyperspectral satellite imagery, model prediction outputs from weather models, latest radar scans, measurements from an array of sensor networks such as Integrated Ocean Observing System etc. More often analysts may be familiar with limited, but specific datasets and are often unaware of or unfamiliar with a large quantity of other useful resources. Finding airborne or satellite data useful to a natural disaster event often requires a time consuming search through web pages and data archives. Additional information related to damages, deaths, and injuries requires extensive online searches for news reports and official report summaries. An analyst must also sift through vast amounts of potentially useful digital information captured by the general public such as geo-tagged photos, videos and real time damage updates within twitter feeds. Collecting and aggregating these information fragments can provide useful information in assessing damage in real time and help direct recovery efforts. The search process for the analyst could be made much more efficient and productive if a tool could go beyond a typical search engine and provide not just links to web sites but actual links to specific data relevant to the natural disaster, parse unstructured reports for useful information nuggets, as well as gather other related reports, summaries, news stories, and images. This presentation will describe a semantic aggregation tool developed to address similar problem for Earth Science researchers. This tool provides automated curation, and creates "Data Albums" to support case studies. The generated "Data Albums" are compiled collections of information related to a specific science topic or event, containing links to relevant data files (granules) from different instruments; tools and services for visualization and analysis; information about the event contained in news reports, and images or videos to supplement research analysis. An ontology-based relevancy-ranking algorithm drives the curation of relevant data sets for a given event. This tool is now being used to generate a catalog of Hurricane Case Studies at Global Hydrology Resource Center (GHRC), one of NASA's Distribute Active Archive Centers. Another instance of the Data Albums tool is currently being created in collaboration with NASA/MSFC's SPoRT Center, which conducts research on unique NASA products and capabilities that can be transitioned to the operational community to solve forecast problems. This new instance focuses on severe weather to support SPoRT researchers in their model evaluation studies

Ramachandran, Rahul↗

A New Look at Data Usage by Using Metadata Attributes as Indicators of Data Quality

This study reviews the key metrics (users, distributed volume, and files) in multiple ways to gain an understanding of the significance of the metadata. Characterizing the usability of data by key metadata elements, such as discipline and study area, will assist in understanding how the user needs have evolved over time. The data usage pattern based on product level provides insight into the level of data quality. In addition, the data metrics by various services, such as the Open-source Project for a Network Data Access Protocol (OPeNDAP) and subsets, address how these services have extended the usage of data. Over-all, this study presents the usage of data and metadata by metrics analyses, which may assist data centers in better supporting the needs of the users.

metadata↗

Proposed Reliability-Based Damage Tolerance Guidelines for Space Systems

Deterministic damage tolerance guidelines for highly reusable and efficiently designed launch systems can be challenging to meet and result in overly conservative assessments for tightly controlled manufacturing processes. Deterministic approaches may be unconservative when the structure is workmanship sensitive and there is a wide spread in fracture properties. Reliability-based damage tolerance assessments targeting a component reliability over the service life commensurate to mission risk posture is a promising alternative. Low production rates, short fleets, and lack of standards or guidance has slowed down widespread adoption of this method. Guidance for the robust application of reliability-based damage tolerance for space systems are proposed. These guidelines cover the treatment of uncertainty in damage tolerance analysis, the collection of data to develop probabilistic distributions, uncertainty propagation methods, and types of hardware.

Reliability-Based Damage Tolerance↗

On-board processing for future satellite communications systems: Satellite-Routed FDMA

A frequency division multiple access (FDMA) 30/20 GHz satellite communications architecture without on-board baseband processing is investigated. Conceptual system designs are suggested for domestic traffic models totaling 4 Gb/s of customer premises service (CPS) traffic and 6 Gb/s of trunking traffic. Emphasis is given to the CPS portion of the system which includes thousands of earth terminals with digital traffic ranging from a single 64 kb/s voice channel to hundreds of channels of voice, data, and video with an aggregate data rate of 33 Mb/s. A unique regional design concept that effectively smooths the non-uniform traffic distribution and greatly simplifies the satellite design is employed. The satellite antenna system forms thirty-two 0.33 deg beam on both the uplinks and the downlinks in one design. In another design matched to a traffic model with more dispersed users, there are twenty-four 0.33 deg beams and twenty-one 0.7 deg beams. Detailed system design techniques show that a single satellite producing approximately 5 kW of dc power is capable of handling at least 75% of the postulated traffic. A detailed cost model of the ground segment and estimated system costs based on current information from manufacturers are presented.

Berk, G.↗

The Dash Data Sharing System

The Data Sharing system (DASH) project was recently undertaken at NASA Johnson Space Center to introduce distributed data sharing into the Mission Control Center (MCC). Although the project focused on MCC communications, the solution is a general one. This paper describes that project. DASH allows applications to share data. It provides callable interfaces for applications wishing to export or import data. The system consists of several processes: publishers make exported data available to subscribers, which provide it to interested importing applications. A network registration service provides network location transparency, allowing the other processes to reside at arbitrary network locations. These processes act as intermediaries between external producing and consuming applications. DASH has been demonstrated in the MCC where it transmits Shuttle electrical bus data from the Bus Loss Smart System to the Configurable Realtime Analysis System. In addition, the Failure Impact and Procedure Analysis system used DASH to transmit Shuttle remote manipulator data from an expert system to a version of CRANS. DASH is currently being used to integrate a knowledge acquisition application and the CLIPS expert system shell.

Hasan, David A.↗

The North Alabama Lightning Mapping Array: Recent Results and Future Prospects

The North Alabama Lightning Mapping Array became operational in November 2001 as a principal component of a severe weather test bed to infuse new science and technologies into the short-term forecasting of severe and hazardous weather and the warning decision-making process. The LMA project is a collaboration among NASA scientists, National Weather Service (NWS) weather forecast offices (WFOs), emergency managers, and other partners. The time rate-of-change of storm characteristics and life-cycle trending are accomplished in real-time through the second generation Lightning Imaging Sensor Data Applications Display (LISDAD II) system, initially developed in T997 through a collaboration among NASA/MSFC, MIT/Lincoln Lab and the Melbourne, FL WFO. LISDAD II is now a distributed decision support system with a JAVA-based display application that allows anyone, anywhere to track individual storm histories within the Tennessee Valley region of the southeastern U.S. Since the inauguration of the LMA there has been an abundance of severe weather. During 23-24 November 2001, a major tornado outbreak was monitored by LMA in its first data acquisition effort (36 tornadoes in Alabama). Since that time the LMA has collected a vast amount of data on hailstorms and damaging wind events, non-tornadic supercells, and ordinary non-severe thunderstorms. In this paper we provide an overview of LMA observations and discuss future prospects for improving the short-term forecasting of convective weather.

Goodman, S. J.↗

Secure, Autonomous, Intelligent Controller for Integrating Distributed Emergency Response Satellite Operations

This report describes a Secure, Autonomous, and Intelligent Controller for Integrating Distributed Emergency Response Satellite Operations. It includes a description of current improvements to existing Virtual Mission Operations Center technology being used by US Department of Defense and originally developed under NASA funding. The report also highlights a technology demonstration performed in partnership with the United States Geological Service for Earth Resources Observation and Science using DigitalGlobe(Registered TradeMark) satellites to obtain space-based sensor data.

Ivancic, William D.↗

Great Lakes Water Resources II: A Google Earth Engine Tool to Automate Wetland Mapping Using Optical and Radar Satellite Sensors in the Great Lakes Basin for Wetland Management and Monitoring

The Great Lakes Basin is one of the world’s largest freshwater ecosystems. The Basin harbors over 200,000 acres of wetlands. These wetlands provide a variety of environmental, ecological, and recreational functions to over 30 million people in the region. Some of these functions include improving water quality, mitigating flood impacts, providing wildlife habitat, and housing recreational activities. However, due to anthropogenic activities, habitat conversion and degradation threaten to disrupt or destroy remaining wetland ecosystems. Maps of wetland distribution based on ground surveys are costly and labor-intensive, prohibiting timely evaluations of wetland loss and gain. The Great Lakes Water Resources II team at the NASA Jet Propulsion Laboratory developed the Wetlands Extent Tool 2.0 (WET 2.0) in Google Earth Engine to automate mapping of wetland distribution in the Great Lakes Basin. The team partnered with the US Fish and Wildlife Service (USFWS), Environmental Protection Agency (EPA), Minnesota Department of Natural Resources (MDNR), the National Oceanic and Atmospheric Administration (NOAA), and Ducks Unlimited (DU). WET 2.0 incorporates Landsat 8 Operational Land Imager (OLI), Sentinel-1 C-band Synthetic Aperture Radar (C-SAR), and Sentinel-2 Multispectral Instrument (MSI) satellite data. WET 2.0 is trained to classify anywhere in the Great Lakes Basin. Utilizing a Random Forest classifier, WET 2.0 is capable of automatically mapping wetland extent in the entire Great Lakes Basin, achieving a mean overall accuracy of 80.12% when tested in Michigan. Findings and maps produced in WET 2.0 will enable our partners to identify areas of ecosystem degradation and wetland destruction in order to enact environmental practices and policy initiatives to maintain environmental and economic health in the area.

Water Resources↗

The Future of NASA Earth Science in the Commercial Cloud: Challenges and Opportunities

NASA produces a large volume and variety of data products that are used every day to support research, decision making, and education. The widespread use of NASA’s Earth Science data is enabled by NASA’s Earth Science Data System (ESDS) program, which oversees the archiving and distribution of these data and invests in the development of new data systems and tools. However, NASA’s current approach to Earth Science data distribution — based on distributed institutional archives with individual on-premises high-performance computing capabilities — faces some significant challenges, including massive increases in data volume from upcoming missions, a greater need for transdisciplinary science that synthesizes many different kinds of observations, and a push to make science more open, inclusive, and accessible. To address these challenges, NASA is aggressively migrating its Earth Science data and related tools and services into the commercial cloud. Migration of data into the commercial cloud can significantly improve NASA’s existing data system capabilities by (1) providing more flexible options for storage and compute (including rapid, as-needed access to state-of-the-art capabilities); (2) by centralizing and standardizing data access, which gives all of NASA’s institutional data centers access to all of each other’s datasets; and (3) by facilitating “analysis-in-place”, whereby users can bring their own computational workflows and tools to the data rather than having to maintain their own copies of NASA datasets. However, migration to the commercial cloud also poses some significant challenges, including (1) managing costs under a “pay-as-you-go” model; (2) incompatibility with existing tools and data formats with object-based storage and network access; (3) vendor lock-in; (4) challenges with data access for workflows that mix on-premise and cloud computing; and (5) standardization for highly diverse data as is present in NASA’s data archive. I conclude with two examples of recent NASA activities showcasing capabilities enabled by the commercial cloud: An interactive analysis and development platform for analyzing airborne imaging spectroscopy data, and a new collection of tools and services for data discovery, analysis, publication, and data-driven storytelling (Visualization, Exploration, and Data Analysis, VEDA).

Alexey N Shiklomanov↗

Telescience Support Center Data System Software

The Telescience Support Center (TSC) team has developed a databasedriven, increment-specific Data Require - ment Document (DRD) generation tool that automates much of the work required for generating and formatting the DRD. It creates a database to load the required changes to configure the TSC data system, thus eliminating a substantial amount of labor in database entry and formatting. The TSC database contains the TSC systems configuration, along with the experimental data, in which human physiological data must be de-commutated in real time. The data for each experiment also must be cataloged and archived for future retrieval. TSC software provides tools and resources for ground operation and data distribution to remote users consisting of PIs (principal investigators), bio-medical engineers, scientists, engineers, payload specialists, and computer scientists. Operations support is provided for computer systems access, detailed networking, and mathematical and computational problems of the International Space Station telemetry data. User training is provided for on-site staff and biomedical researchers and other remote personnel in the usage of the space-bound services via the Internet, which enables significant resource savings for the physical facility along with the time savings versus traveling to NASA sites. The software used in support of the TSC could easily be adapted to other Control Center applications. This would include not only other NASA payload monitoring facilities, but also other types of control activities, such as monitoring and control of the electric grid, chemical, or nuclear plant processes, air traffic control, and the like.

Rahman, Hasan↗

Mangrove Carbon Stocks in Pongara National Park, Gabon

Mangroves are recognized for their valued ecosystem services to coastal areas, and the functional linkages between those services and ecosystem carbon stocks have been established. However, spatially explicit inventories are necessary to facilitate management and protection of mangroves, as well as providing a foundation for payment for ecosystem service programs such as REDD+. We conducted an inventory of carbon stocks in mangroves within Pongara National Park (PNP), Gabon using a stratified random sampling design based on forest canopy height derived from TanDEM-X remote sensing data. Ecosystem carbon pools, including aboveground and belowground biomass and necromass, and soil carbon to a depth of 2 m were assessed using measurements and samples from plots distributed among three canopy height classes within the park. There were two mangrove species within the inventory area in PNP, Rhizophora racemosa and R. harrisonii. R. harrisonii was predominant in the sparse, low-stature stands that dominated the west side of the park. In the east side of the park, both species occurred in tall-stature stands, with tree height often exceeding 30 m. Canopy height was an effective means to stratify the inventory area, as biomass was significantly different among the height classes. Despite those differences in aboveground biomass, the soil carbon density was not significantly different among height classes. Soils were the main component of the ecosystem carbon stock, accounting for over 84% of the total. The ecosystem carbon density ranged from 644 to 943 Mg C ha−1 among the three height classes. The ecosystem carbon stock within PNP is estimated to be 40,588 Gg C. The combination of pre-inventory information about stand conditions and their spatial distribution within the assessment area obtained from remote sensing data and a spatial decision support system were fundamental to implementing this relatively large-scale field inventory. This work exemplifies how mangrove carbon stocks can be quantified to augment national C reporting statistics, provide a baseline for projects involving monitoring, reporting and verification (i.e., MRV), and provide data on the forest composition and structure for sustainable management and conservation practices.

Carl C Trettin↗

Accelerating the Design of Space Vehicles

One of NASA's key goals is to increase the safety and reduce the cost of space transportation. Thus, a key element of NASA's new Integrated Space Transportation Plan is to develop new propulsion, structures, and operations for future generations of reusable launch vehicles (RLVs). As part of this effort to develop the next RLV, the ClCT Program's Computing, Networking, and Information Systems (CNIS) Project is developing and demonstrating collaborative software technologies that use the collective power of the NASA Grid to accelerate spacecraft design. One of these technologies, called AeroDB, automates the execution and monitoring of computational fluid dynamics (CFD) parameter studies on the NASA Grid. About the NASA Grid The NASA Grid, or Information Power Grid,. is being developed to leverage the distributed resources of NASA's many computers. instruments, simulators, and data storage systems. The goal is to use these combined resources to sdve difficult NASA challenges, such as iimulating the entire flight of a space vehicle from ascent to descent.To realize the vision of the NASA Grid, the CNIS Project is developing the software framework and protocols for building domain-specific environments and interfaces, new Grid services based on emerging industry standards, and advanced networking and computing testbeds to support new Grid-based applications such as AeroDB.

Laufenberg, Larry↗