Search NASA⌕ Search

SEARCH · Search NASA

Results for “Data processing methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29
All sourcesNASA NTRSDOE OSTI
NASA NTRS1985

Validation of the ERBE scanner scene identification methodology: Analysis with Nimbus-7 ERB data

Maximum Likelihood Estimation (MLE) procedure for scene identification currently being utilized in the ERBE scanner data processing stream is applied to the Nimbus-7 ERB Scanner data for the month of June 1979. The Earth radiation budget parameters derived using MLE method show very good agreement with the values provided using sorting into angular bins (SAB) method. Results of the fields on different spatial scales are presented. A satellite zenith angle study indicates that the MLE procedure considerably improves the scene selection over the method of bispectral thresholds applied in the Nimbus-7 ERB data processing. Agreement with SAB results improved further when the observations were cut off at 75% in satellite zenith. Sampling constraints, however require that the cut-off angle should not be lower than 70%. Quantitative details about the reliability of the scene identification are also presented.

Vermury, S.↗
NASA NTRS1976

Multiplexor and sensor system tradeoff study

The influence of certain sensor parameters on the accuracy of information extracted from satellite image data is studied, using a digital processing flow to simulate the effects of the sensor parameters. The method employed was to select representative images; scan and digitize them; process the digital data to simulate the effects of presampling filters, instantaneous field of view (IFOV) size and shape, sampling rates, noise, and word length; record the processed data on film; evaluate the film images; and draw conclusions from the evaluations. The study showed that presampling filters are not required to suppress aliasing, that the choice of square and circular IFOV shapes is not important, and that increased horizontal and vertical sampling rates produce an increase in apparent resolution. Work with low-contrast targets revealed a definite maximum in the tradeoff between IFOV size and SNR.

Ferneyhough, D. G., Jr.↗
NASA NTRS1980

ICAP: An Interactive Cluster Analysis Procedure for analyzing remotely sensed data

An Interactive Cluster Analysis Procedure (ICAP) was developed to derive classifier training statistics from remotely sensed data. The algorithm interfaces the rapid numerical processing capacity of a computer with the human ability to integrate qualitative information. Control of the clustering process alternates between the algorithm, which creates new centroids and forms clusters and the analyst, who evaluate and elect to modify the cluster structure. Clusters can be deleted or lumped pairwise, or new centroids can be added. A summary of the cluster statistics can be requested to facilitate cluster manipulation. The ICAP was implemented in APL (A Programming Language), an interactive computer language. The flexibility of the algorithm was evaluated using data from different LANDSAT scenes to simulate two situations: one in which the analyst is assumed to have no prior knowledge about the data and wishes to have the clusters formed more or less automatically; and the other in which the analyst is assumed to have some knowledge about the data structure and wishes to use that information to closely supervise the clustering process. For comparison, an existing clustering method was also applied to the two data sets.

Wharton, S. W.↗
NASA NTRS1985

Bouguer Images of the North American Craton

Processing of existing gravity and aeromagnetic data with modern methods is providing new insights into crustal and mantle structures for large parts of the United States and Canada. More than three-quarters of a million ground station readings of gravity are now available for this region. These data offer a wealth of information on crustal and mantle structures when reduced and displayed as Bouguer anomalies, where lateral variations are controlled by the size, shape and densities of underlying materials. Digital image processing techniques were used to generate Bouguer images that display more of the granularity inherent in the data as compared with existing contour maps. A dominant NW-SE linear trend of highs and lows can be seen extending from South Dakota, through Nebaska, and into Missouri. This trend is probably related to features created during an early and perhaps initial episode of crustal assembly by collisional processes. The younger granitic materials are probably a thin cover over an older crust.

Arvidson, R. E.↗
NASA NTRS1992

Comparison of general circulation models to Earth Radiation Budget Experiment data - Computation of clear-sky fluxes

A clear-sky flux computation method is described which is representative of the Earth Radiation Budget Experiment data processing, while at the same time being enough straightforward for implementation in a general circulation model (GCM). The method is a hybrid version of Cess and Potter (1987) Method I and Method II clear-sky top-of-the-atmosphere flux computations for GCMs. The procedure is demonstrated using the ECMWF GCM.

Cess, Robert D.↗
NASA NTRS2002

Method and systems for collecting data from multiple fields of view

Systems and methods for processing light from multiple fields (48, 54, 55) of view without excessive machinery for scanning optical elements. In an exemplary embodiment of the invention, multiple holographic optical elements (41, 42, 43, 44, 45), integrated on a common film (4), diffract and project light from respective fields of view.

Schwemmer, Geary K.↗
NASA NTRS2016

Unsupervised Spatio-Temporal Data Mining Framework for Burned Area Mapping

A method reduces processing time required to identify locations burned by fire by receiving a feature value for each pixel in an image, each pixel representing a sub-area of a location. Pixels are then grouped based on similarities of the feature values to form candidate burn events. For each candidate burn event, a probability that the candidate burn event is a true burn event is determined based on at least one further feature value for each pixel in the candidate burn event. Candidate burn events that have a probability below a threshold are removed from further consideration as burn events to produce a set of remaining candidate burn events.

Boriah, Shyam↗
NASA NTRS2000

Processing CCD Images to Detect Transits of Earth-Sized Planets: Maximizing Sensitivity While Achieving Reasonable Downlink Requirements

We have performed end-to-end laboratory and numerical simulations to demonstrate the capability of differential photometry under realistic operating conditions to detect transits of Earth-sized planets orbiting solar-like stars. Data acquisition and processing were conducted using the same methods planned for the proposed Kepler Mission. These included performing aperture photometry on large-format CCD images of an artificial star fields obtained without a shutter at a readout rate of 1 megapixel/sec, detecting and removing cosmic rays from individual exposures and making the necessary corrections for nonlinearity and shutterless operation in the absence of darks. We will discuss the image processing tasks performed `on-board' the simulated spacecraft, which yielded raw photometry and ancillary data used to monitor and correct for systematic effects, and the data processing and analysis tasks conducted to obtain lightcurves from the raw data and characterize the detectability of transits. The laboratory results are discussed along with the results of a numerical simulation carried out in parallel with the laboratory simulation. These two simulations demonstrate that a system-level differential photometric precision of 10-5 on five- hour intervals can be achieved under realistic conditions.

Earth-size planets↗
DOE OSTI2026

Screening and qualification methodology for SiC end plug processing methods

Deployment of SiC-ceramic-based fuel cladding for light water reactors requires a hermetic end plug–to–cladding joint that can withstand neutron irradiation during normal operation and maintain integrity during design-basis accidents. Reactor experiments have shown that some SiC composite tubes with SiC end plugs can retain hermeticity after irradiation. However, achieving consistent joint performance under irradiation remains a key challenge. Resolving this issue is essential to enable integral irradiation testing and to demonstrate fuel integrity under commercial-reactor irradiation conditions. This report aims to: (1) provide guidance for designing radiation-tolerant end plug joints for SiC cladding; (2) demonstrate experimental methods to detect processing defects that are unstable under neutron irradiation at light-water-reactor-relevant temperatures and doses; and (3) outline a step-by-step approach for designing and conducting reactor experiments to screen joining methods. The resulting data will be used to improve joint processing and to define critical defect types and sizes that must be detected and eliminated through non-destructive evaluation for quality assurance. Based on prior irradiation experiments at the High Flux Isotope Reactor, differential swelling among the cladding, bonding layer, and end plug was identified as an underlying mechanism for irradiation-induced joint degradation. Accordingly, this effect must be considered in the design of radiation-tolerant joining techniques. In this work, miniature SiC end plug joint specimens irradiated during the previous project were analyzed using X-ray computed tomography to characterize the joint microstructure. Digital volume correlation of the tomography data quantified radiation-induced microstructural changes and enabled evaluation of defect-related risks. Finally, ongoing neutron irradiation efforts using larger specimen volumes are presented. These efforts aim to statistically assess joint performance and to build a microstructure–performance (e.g., leak-tightness) dataset to inform processing improvements and quality control.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2025

Strength and ductility of additively manufactured 316L stainless steel: Impact of neutron irradiation and data variability

Here, this article presents the mechanical properties of additively manufactured (AM) 316L stainless steel processed via the laser powder bed fusion (LPBF) method, focusing on the effects of neutron irradiation on mechanical properties and the variability in strength and ductility data. The rapid melting-solidification process and multiple heating-cooling cycles inherent in LPBF typically result in a fine, metastable microstructure with significant local variability. AM 316L builds of varying thicknesses were fabricated, and SS-J3 miniature tensile specimens were machined from six different locations. These specimens were irradiated with fast neutrons to doses of 2 and 10 dpa at target temperatures of 300 °C and 600 °C. Post-irradiation tensile tests were conducted at room temperature, 300 °C, and 600 °C. Compared to conventional 316L stainless steel, AM 316L exhibited higher initial strength but lower ductility. Irradiation at 300 °C caused significant hardening and prompt necking at yield, with limited uniform ductility, although embrittlement was not observed up to 10 dpa. While neutron irradiation, particularly at 600 °C, increased the variability in strength and ductility data, no clear dependence of mechanical properties on build thickness or sampling location was found—contrary to the conventional perception that AM materials may exhibit high property variability. Furthermore, we observed that the variability in property data for LPBF-processed 316L was relatively low compared to that of wrought 316L stainless steel. This reduced variability in AM 316L steel may be attributed to its highly metastable, stress-containing microstructure, which is discussed in the context of general tensile property variations.

Additively manufactured 316L stainless steel↗
NASA NTRS1994

Composite Load Spectra for Select Space Propulsion Structural Components

Generic load models are described with multiple levels of progressive sophistication to simulate the composite (combined) load spectra (CLS) that are induced in space propulsion system components, representative of Space Shuttle Main Engines (SSME), such as transfer ducts, turbine blades and liquid oxygen (LOX) posts. These generic (coupled) models combine the deterministic models for composite load dynamic, acoustic, high-pressure and high rotational speed, etc., load simulation using statistically varying coefficients. These coefficients are then determined using advanced probabilistic simulation methods with and without strategically selected experimental data. The entire simulation process is included in a CLS computer code. Applications of the computer code to various components in conjunction with the PSAM (Probabilistic Structural Analysis Method) to perform probabilistic load evaluation and life prediction evaluations are also described to illustrate the effectiveness of the coupled model approach.

Ho, Hing W.↗
NASA NTRS1975

Remote Sensing: A valuable tool in the Forest Service decision making process

Forest Service studies for integrating remotely sensed data into existing information systems highlight a need to: (1) re-examine present methods of collecting and organizing data, (2) develop an integrated information system for rapidly processing and interpreting data, (3) apply existing technological tools in new ways, and (4) provide accurate and timely information for making right management decisions. The Forest Service developed an integrated information system using remote sensors, microdensitometers, computer hardware and software, and interactive accessories. Their efforts substantially reduce the time it takes for collecting and processing data.

Stanton, F. L.↗
NASA NTRS1994

Calibration of the COBE FIRAS instrument

The Far-Infrared Absolute Spectrophotometer (FIRAS) instrument on the Cosmic Background Explorer (COBE) satellite was designed to accurately measure the spectrum of the cosmic microwave background radiation (CMBR) in the frequency range 1-95/cm with an angular resolution of 7 deg. We describe the calibration of this instrument, including the method of obtaining calibration data, reduction of data, the instrument model, fitting the model to the calibration data, and application of the resulting model solution to sky observations. The instrument model fits well for calibration data that resemble sky condition. The method of propagating detector noise through the calibration process to yield a covariance matrix of the calibrated sky data is described. The final uncertainties are variable both in frequency and position, but for a typical calibrated sky 2.6 deg square pixel and 0.7/cm spectral element the random detector noise limit is of order of a few times 10(exp -7) ergs/sq cm/s/sr cm for 2-20/cm, and the difference between the sky and the best-fit cosmic blackbody can be measured with a gain uncertainty of less than 3%.

Fixsen, D. J.↗
NASA NTRS2001

Spacecraft attitude control systems with dynamic methods and structures for processing star tracker signals

Methods are provided for dynamically processing successively-generated star tracker data frames and associated valid flags to generate processed star tracker signals that have reduced noise and a probability greater than a selected probability P.sub.slctd of being valid. These methods maintain accurate spacecraft attitude control in the presence of spurious inputs (e.g., impinging protons) that corrupt collected charges in spacecraft star trackers. The methods of the invention enhance the probability of generating valid star tracker signals because they respond to a current frame probability P.sub.frm by dynamically selecting the largest valid frame combination whose combination probability P.sub.cmb satisfies a selected probability P.sub.slctd. Noise is thus reduced while the probability of finding a valid frame combination is enhanced. Spacecraft structures are also provided for practicing the methods of the invention.

Liu, Yong↗
NASA NTRS1978

DSN command system Mark III-78

The Deep Space Network command Mark III-78 data processing system includes a capability for a store-and-forward handling method. The functions of (1) storing the command files at a Deep Space station; (2) attaching the files to a queue; and (3) radiating the commands to the spacecraft are straightforward. However, the total data processing capability is a result of assuming worst case, failure-recovery, or nonnominal operating conditions. Optional data processing functions include: file erase, clearing the queue, suspend radiation, command abort, resume command radiation, and close window time override.

Stinnett, W. G.↗
NASA NTRS1989

Tropical oceanic rainfall - Estimation from SMMR and SSM/I

A method of inferring rainfall over oceans with Nimbus-7 SMMR data (Prabhakara et al., 1986) is improved by including data from the DMSP Special Sensor Microwave Imager (SSM/I). The microwave observations at low frequencies are compared with the SSM/I measurements at 85 GHz. The process used to analyze the microwave data and the retrieval method are described. A map of the monthly mean rainfall rate for July 1987 over the North and South Pacific Oceans is obtained using the SSM/I data.

Prabhakara, C.↗
NASA NTRS1995

Enhancements to the SSME transfer function modeling code

This report details the results of a one year effort by Ohio University to apply the transfer function modeling and analysis tools developed under NASA Grant NAG8-167 (Irwin, 1992), (Bartholomew, 1992) to attempt the generation of Space Shuttle Main Engine High Pressure Turbopump transfer functions from time domain data. In addition, new enhancements to the transfer function modeling codes which enhance the code functionality are presented, along with some ideas for improved modeling methods and future work. Section 2 contains a review of the analytical background used to generate transfer functions with the SSME transfer function modeling software. Section 2.1 presents the 'ratio method' developed for obtaining models of systems that are subject to single unmeasured excitation sources and have two or more measured output signals. Since most of the models developed during the investigation use the Eigensystem Realization Algorithm (ERA) for model generation, Section 2.2 presents an introduction of ERA, and Section 2.3 describes how it can be used to model spectral quantities. Section 2.4 details the Residue Identification Algorithm (RID) including the use of Constrained Least Squares (CLS) and Total Least Squares (TLS). Most of this information can be found in the report (and is repeated for convenience). Section 3 chronicles the effort of applying the SSME transfer function modeling codes to the a51p394.dat and a51p1294.dat time data files to generate transfer functions from the unmeasured input to the 129.4 degree sensor output. Included are transfer function modeling attempts using five methods. The first method is a direct application of the SSME codes to the data files and the second method uses the underlying trends in the spectral density estimates to form transfer function models with less clustering of poles and zeros than the models obtained by the direct method. In the third approach, the time data is low pass filtered prior to the modeling process in an effort to filter out high frequency characteristics. The fourth method removes the presumed system excitation and its harmonics in order to investigate the effects of the excitation on the modeling process. The fifth method is an attempt to apply constrained RID to obtain better transfer functions through more accurate modeling over certain frequency ranges. Section 4 presents some new C main files which were created to round out the functionality of the existing SSME transfer function modeling code. It is now possible to go from time data to transfer function models using only the C codes; it is not necessary to rely on external software. The new C main files and instructions for their use are included. Section 5 presents current and future enhancements to the XPLOT graphics program which was delivered with the initial software. Several new features which have been added to the program are detailed in the first part of this section. The remainder of Section 5 then lists some possible features which may be added in the future. Section 6 contains the conclusion section of this report. Section 6.1 is an overview of the work including a summary and observations relating to finding transfer functions with the SSME code. Section 6.2 contains information relating to future work on the project.

Irwin, R. Dennis↗
NASA NTRS1988

On the simultaneous improvement of a satellite orbit and determination of sea surface topography using altimeter data

A method is presented in satellite altimetry that attempts to simultaneously determine the geoid and sea surface toography with minimum wavelengths of about 500 km and to reduce the radial orbit errors caused by geopotential uncertainties. The modeling of these errors is made using the linearized Lagrangian perturbation theory. Observation equations are developed using sea surface heights and crossover discrepancies as observables. A minimum variance solution with prior information can then provide estimates of parametrs representing the sea surface topography and corrections to the orbit. The potential of the method is demonstrated in a solution where simulated geopotential errors and the Levitus sea surface topography are used to generate the observables for a Seasat 3 day arc. The simulation results suggest that the method can be used to efficiently process real altimeter data.

Engelis, Theodossios↗