Search NASA⌕ Search

SEARCH · Search NASA

Results for “Data reporting”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29

A practical approach to determining the uncertainty of a pressure measurement system

The pressure measurement systems located at three propulsion component test stands at the Marshall Space Flight Center (MSFC) were evaluated for their specific measurement uncertainty levels. An elemental error source evaluation was performed to provide an analytical estimate of uncertainty. Applied loads tests were also conducted at the different MSFC test sites to derive an empirical estimate of uncertainty for the measurement system process. The analytical results are compared to those obtained empirically. The data from MFSC was also compared to data reported from other comparable test facilities. Methods for acquiring and processing the data from calibration, acquisition, and reduction error sources are also addressed.

Fish, James E.↗

Surface gravity waves at equilibrium with a steady wind

Observations of wave fields' spatial evolution and of gravity wave spectra S(sub omega) are analyzed on the basis of the data reported by several research groups as well as on a 2-year data set of wind and wave measurements by stationary National Oceanic and Atmospheric Administration buoys near the Hawaiian Islands. We seek to clarify the role of the wave energy advection (with the wave group velocity) in the overall energy balance. This advective transfer appears to be no less important than the local (breaking wave induced) dissipation as a factor of wind-wave equilibrium. The advection is found to manifest itself in the shape of wave spectra by reducing the rate at which the spectra density of the wave energy, S(sub omega approximately omega (exp -p), falls off as the frequency increases away from the spectra peak. This and other conclusions are derived by comparing the field observations with theoretical predictions of the weak turbulence theory for a spatially inhomogeneous, statistically stationary, wave field. The observations also indicate that the typical wave age xi = C(sub 0)/U in the open ocean is much greater than the limiting value 1.2 attributed to the 'fully developed sea.' Although the observed spectra can be approximated by a power law with a single 'effective' exponent, this apparent exponent, p, is found to depend on the wave age. At high xi and at frequencies below the generation range, -p tends to -3 rather than the value of -11/3 predicted by the Zakharov-Zaslavskii theory. This deviation is interpreted as pointing to a nonconservative nature of the inverse cascade, the latter including a leakage of energy to low-wavenumber modes. Dependence of the overall effective exponent on xi is shown to be responsible for variation in the coefficients b, B, c, C appearing in empirical fetch laws, such as xi = C bar-x (exp c) and e = B bar-x (exp B), where bar-x and e are the dimensionless fetch and wave energy, respectively.

Glazman, Roman E.↗

Dam Failure Inundation Map Project

At the end of the first year, we remain on schedule. Property owners were identified and contacted for land access purposes. A prototype software package has been completed and was demonstrated to the Division of Land and Natural Resources (DLNR), National Weather Service (NWS) and Pacific Disaster Center (PDC). A field crew gathered data and surveyed the areas surrounding two dams in Waimea. (A field report is included in the annual report.) Data sensitivity analysis was initiated and completed. A user's manual has been completed. Beta testing of the software was initiated, but not completed. The initial TNK and property owner data collection for the additional test sites on Oahu and Kauai have been initiated.

Johnson, Carl↗

Vibration damping characteristics of graphite/epoxy composites for large space structures

Limited data on extensional and flexural damping of small specimens of graphite/epoxy and unreinforced epoxy resin were obtained. Flexural damping was measured using a forced vibration technique based on resonant flexural vibration of shaker excited double cantilever specimens. Extensional damping was measured by subjecting similar specimens to low frequency sinusoidal oscillation in a servohydraulic tensile testing machine while plotting load versus extensional strain. Damping was found to vary slowly and continuously over the frequency range 0.01 - 1000 Hz, and no drastic transitions were observed. Composite damping was found to be less than neat resin damping. Comparison of small specimen damping values with assembled column damping values seems to indicate that, for those materials, material damping is more important than joint damping. The data reported was limited not by the test apparatus, but by signal conditioning and data acquisition. It is believed that filtering of the strain gage signals and the use of digital storage with slow playback will make it possible to extend the frequency and amplitude ranges significantly.

Gibson, R. F.↗

2-D and 3-D oscillating wing aerodynamics for a range of angles of attack including stall

A comprehensive experimental investigation of the pressure distribution over a semispan wing undergoing pitching motions representative of a helicopter rotor blade was conducted. Testing the wing in the nonrotating condition isolates the three-dimensional (3-D) blade aerodynamic and dynamic stall characteristics from the complications of the rotor blade environment. The test has generated a very complete, detailed, and accurate body of data. These data include static and dynamic pressure distributions, surface flow visualizations, two-dimensional (2-D) airfoil data from the same model and installation, and important supporting blockage and wall pressure distributions. This body of data is sufficiently comprehensive and accurate that it can be used for the validation of rotor blade aerodynamic models over a broad range of the important parameters including 3-D dynamic stall. This data report presents all the cycle-averaged lift, drag, and pitching moment coefficient data versus angle of attack obtained from the instantaneous pressure data for the 3-D wing and the 2-D airfoil. Also presented are examples of the following: cycle-to-cycle variations occurring for incipient or lightly stalled conditions; 3-D surface flow visualizations; supporting blockage and wall pressure distributions; and underlying detailed pressure results.

Piziali, R. A.↗

International Metadata Standards and Enterprise Data Quality Metadata Systems

Well-documented data quality is critical in situations where scientists and decision-makers need to combine multiple datasets from different disciplines and collection systems to address scientific questions or difficult decisions. Standardized data quality metadata could be very helpful in these situations. Many efforts at developing data quality standards falter because of the diversity of approaches to measuring and reporting data quality. The one size fits all paradigm does not generally work well in this situation. I will describe these and other capabilities of ISO 19157 with examples of how they are being used to describe data quality across the NASA EOS Enterprise and also compare these approaches with other standards.

data quality↗

ALMA Observations of α Centauri First Detection of Main-Sequence Stars at 3 mm Wavelength

The precise mechanisms that provide the non-radiative energy for heating the chromosphere and the corona of the Sun and those of other stars constitute an active field of research. By studying stellar chromospheres one aims at identifying the relevant physical processes. Defining the permittable extent of the parameter space can also serve as a template for the Sun-as-a-star. This feedback will probably also help identify stars that potentially host planetary systems that are reminiscent of our own. Earlier observations with Herschel and APEX have revealed the temperature minimum of Alpha Cen, but these were unable to spatially resolve the binary into individual components. With the data reported in this Letter, we aim at remedying this shortcoming. Furthermore, these earlier data were limited to the wavelength region between 100 and 870 um. In the present context, we intend to extend the spectral mapping (SED) to longer wavelengths, where the contrast between stellar photospheric and chromospheric emission becomes increasingly evident. The Atacama Large Millimeter submillimeter Array (ALMA) is particularly suited to point sources, such as unresolved stars. ALMA provides the means to achieve our objectives with both its high sensitivity of the collecting area for the detection of weak signals and the high spatial resolving power of its adaptable interferometer for imaging close multiple stars. This is the first detection of main-sequence stars at a wavelength of 3 mm. Furthermore, the individual components of the binary Alpha CenAB are clearly detected and spatially well resolved at all ALMA wavelengths. The high signal-to-noise ratios of these data permit accurate determination of their relative flux ratios, i.e., S(sub y(sup B)) / S(sub y(sup A))> = 0.54 +/- 0.04 at 440 μm, = 0.46 +/- 0.01 at 870 μm, and = 0.47 +/- 0.006 at 3.1 mm, respectively.. The previously obtained flux ratio of 0.44+/-0.18, which was based on measurements in the optical and at 70 μm, is consistent with the present ALMA results, albeit with a large error bar. The observed 3.1 mm emission greatly exceeds what is predicted from the stellar photospheres, and undoubtedly arises predominantly as free-free emission in the ionized chromospheric plasmas of both stars. Given the distinct difference in their cyclic activity, the similarity of their submm SEDs appears surprising.

Herschel↗

Analysis of Hydrogen Supply Chain Readiness in Selected Indo-Pacific Countries

This report explores the low-carbon hydrogen production and procurement targets of Indo-Pacific Economic Framework for Prosperity (IPEF) countries, highlighting key cost and infrastructure considerations. By 2030, production costs are targeted between US$\$$1.4-4.8/kg-H2, with procurement prices at US$\$$2.3/kg-H2, narrowing further by 2050. Midstream costs, including storage and transportation, are critical to meeting these targets and enabling hydrogen trade. The report discusses challenges such as infrastructure readiness, regulatory frameworks, and the need for improved data reporting. It emphasizes the importance of tax incentives, research investments, and port readiness to support the growth of low-carbon hydrogen markets in the region.

08 HYDROGEN↗

ESnet Watershed Field Science Data Backhaul Campaign Report

ESnet’s Watershed Field Science Data Backhaul Campaign is intended to improve the ability to gather data from sensors deployed across the East River and Trail Creek watersheds, with a special focus on the Snodgrass distributed sensor area, the Pumphouse instruments with co-located U.S. Department of Energy (DOE) Atmospheric Radiation Measurement (ARM) User Facility Surface Atmosphere Integrated Field Laboratory (SAIL) tethered balloon setup, and the former ARM SAIL campaign’s second ARM Mobile Facility (AMF2) site by the Watershed Function Science Focus Area (WFSFA) program. This program is not funded by ARM, but collaborates with ARM as part of the SAIL campaign, collocated with the WFSFA field sites in Colorado’s East River Watershed.

54 ENVIRONMENTAL SCIENCES↗

Taming the Wild West: Assessing Impacts-Relevant Climate Data Products (Abbreviated Report)

Impacts-relevant Earth system data refers to observational and ESM data that are downscaled, debiased, validated, and provisioned for use by decision-makers. Impacts-relevant Earth system data is essential for mitigation and adaptation planning across a variety of regions and sectors. A vast number of these data products have emerged in recent years, which has led to confusion among stakeholders and scientists as to the best product to use. With no standard evaluation protocol available for these products, the decision on which product to use was sometimes made because it was pragmatic rather than the best product to use. This project sought to develop foundational capabilities around impacts-relevant data products that would support more informed selection and application of these products. This work has been immensely successful, driving several academic publications and supported the development of a community of practice around impacts-relevant data products. Over the project’s three years we have addressed six tasks: First, the development of standard evaluation metrics for impacts-relevant climate data; second, the development of a novel suite of atmospheric river metrics; third, the development of novel metrics for precipitation feature analysis; fourth, the development of novel metrics for assessing co-variances between temperature and precipitation; fifth, the development of a dashboard for interactive examination of impacts-relevant climate data; and sixth, the establishment of a community of practice around impacts-relevant climate data that will continue beyond the conclusion of this project.

54 ENVIRONMENTAL SCIENCES↗

Taming the Wild West: Assessing Impacts-Relevant Climate Data Products (Final Report)

Impacts-relevant Earth system data refers to observational and ESM data that are downscaled, debiased, validated, and provisioned for use by decision-makers. Impacts-relevant Earth system data is essential for mitigation and adaptation planning across a variety of regions and sectors. A vast number of these data products have emerged in recent years, which has led to confusion among stakeholders and scientists as to the best product to use. With no standard evaluation protocol available for these products, the decision on which product to use was sometimes made because it was pragmatic rather than the best product to use. This project sought to develop foundational capabilities around impacts-relevant data products that would support more informed selection and application of these products. This work has been immensely successful, driving several academic publications and supported the development of a community of practice around impacts-relevant data products.

54 ENVIRONMENTAL SCIENCES↗

Data analysis and reporting

Selection and compression of flight data for real time monitoring and data reduction for Gemini flights

DATA PROCESSING↗

West coast RFI survey, volume 1, volume 2 appendix E, volume 3 appendix F, volume 4 appendix G, and volume 5 appendix H

Activities and data reported cover experimental design, mechanization onboard the aircraft, survey operations, quick look and automated data reduction, and a qualitative comparison of survey data with predicted values for the radio frequency survey. The survey was designed to measure amplitude, frequency and time of occurrence of terrestrial emissions in the VHF band during overflights of heavily populated metropolitan areas located on the Pacific Coast of the Continental United States by sensing and recording equipment installed in jet aircraft.

Deutsch, W. F.↗

Aerothermodynamic data base. Data file contents report, phase C

Space shuttle aerothermodynamic data, collected from a continuing series of wind tunnel tests, are permanently stored with the Data Management Services (DMS) system. Information pertaining to current baseline configuration definition is also stored. Documentation of DMS processed data arranged sequentially and by space shuttle configuration is listed to provide an up-to-date record of all applicable aerothermodynamic data collected, processed, or summarized during the space shuttle program. Tables provide survey information to the various space shuttle managerial and technical levels.

Lutz, G. R.↗