Search NASA⌕ Search

SEARCH · Search NASA

Results for “Design optimization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29
All sourcesNASA NTRSDOE OSTI
NASA NTRS2017

Design and Optimization of Multi-Pixel Transition-Edge Sensors for X-Ray Astronomy Applications

Multi-pixel transition-edge sensors (TESs), commonly referred to as 'hydras', are a type of position sensitive micro-calorimeter that enables very large format arrays to be designed without commensurate increase in the number of readout channels and associated wiring. In the hydra design, a single TES is coupled to discrete absorbers via varied thermal links. The links act as low pass thermal filters that are tuned to give a different characteristic pulse shape for x-ray photons absorbed in each of the hydra sub pixels. In this contribution we report on the experimental results from hydras consisting of up to 20 pixels per TES. We discuss the design trade-offs between energy resolution, position discrimination and number of pixels and investigate future design optimizations specifically targeted at meeting the readout technology considered for Lynx.

Smith, Stephen J.↗
NASA NTRS1992

Design sensitivity analysis and optimization tool (DSO) for sizing design applications

The DSO tool, a structural design software system that provides the designer with a graphics-based menu-driven design environment to perform easy design optimization for general applications, is presented. Three design stages, preprocessing, design sensitivity analysis, and postprocessing, are implemented in the DSO to allow the designer to carry out the design process systematically. A framework, including data base, user interface, foundation class, and remote module, has been designed and implemented to facilitate software development for the DSO. A number of dedicated commercial software/packages have been integrated in the DSO to support the design procedures. Instead of parameterizing an FEM, design parameters are defined on a geometric model associated with physical quantities, and the continuum design sensitivity analysis theory is implemented to compute design sensitivity coefficients using postprocessing data from the analysis codes. A tracked vehicle road wheel is given as a sizing design application to demonstrate the DSO's easy and convenient design optimization process.

Chang, Kuang-Hua↗
NASA NTRS1973

Analytical and experimental performance of optimal controller designs for a supersonic inlet

The techniques of modern optimal control theory were applied to the design of a control system for a supersonic inlet. The inlet control problem was approached as a linear stochastic optimal control problem using as the performance index the expected frequency of unstarts. The details of the formulation of the stochastic inlet control problem are presented. The computational procedures required to obtain optimal controller designs are discussed, and the analytically predicted performance of controllers designed for several different inlet conditions is tabulated. The experimental implementation of the optimal control laws is described, and the experimental results obtained in a supersonic wind tunnel are presented. The control laws were implemented with analog and digital computers. Comparisons are made between the experimental and analytically predicted performance results. Comparisons are also made between the results obtained with continuous analog computer controllers and discrete digital computer versions.

Zeller, J. R.↗
NASA NTRS2012

Recent Improvements to the Copernicus Trajectory Design and Optimization System

Copernicus is a software tool for spacecraft trajectory design and optimization. The latest version (v3.0.1) was released in October 2011. It is available at no cost to NASA centers, government contractors, and organizations with a contractual affiliation with NASA. This paper is a brief overview of the recent development history of Copernicus. An overview of the evolution of the software and a discussion of significant new features and improvements is given, and how the tool is used to design spacecraft missions

Williams, Jacob↗
NASA NTRS2016

Buckling Design and Imperfection Sensitivity of Sandwich Composite Launch-Vehicle Shell Structures

Composite materials are increasingly being considered and used for launch-vehicle structures. For shell structures, such as interstages, skirts, and shrouds, honeycomb-core sandwich composites are often selected for their structural efficiency. Therefore, it is becoming increasingly important to understand the structural response, including buckling, of sandwich composite shell structures. Additionally, small geometric imperfections can significantly influence the buckling response, including considerably reducing the buckling load, of shell structures. Thus, both the response of the theoretically perfect structure and the buckling imperfection sensitivity must be considered during the design of such structures. To address the latter, empirically derived design factors, called buckling knockdown factors (KDFs), were developed by NASA in the 1960s to account for this buckling imperfection sensitivity during design. However, most of the test-article designs used in the development of these recommendations are not relevant to modern launch-vehicle constructions and material systems, and in particular, no composite test articles were considered. Herein, a two-part study on composite sandwich shells to (1) examine the relationship between the buckling knockdown factor and the areal mass of optimized designs, and (2) to interrogate the imperfection sensitivity of those optimized designs is presented. Four structures from recent NASA launch-vehicle development activities are considered. First, designs optimized for both strength and stability were generated for each of these structures using design optimization software and a range of buckling knockdown factors; it was found that the designed areal masses varied by between 6.1% and 19.6% over knockdown factors ranging from 0.6 to 0.9. Next, the buckling imperfection sensitivity of the optimized designs is explored using nonlinear finite-element analysis and the as-measured shape of a large-scale composite cylindrical shell. When compared with the current buckling design recommendations, the results suggest that the current recommendations are overly conservative and that the development of new recommendations could reduce the acreage areal mass of many composite sandwich shell designs by between 4% and 19%, depending on the structure.

Schultz, Marc R.↗
NASA NTRS1988

Optimal experiment design for on-orbit identification

An optimal on-orbit experiment is designed to extract the most information from an on-orbit test, subject to the constraints of the testing environment. However, simply jumping in and optimizing standard measures of information with respect to the experiment design can cause severe problems if attention is not paid to the specific needs and properties of the problem at hand. The actual criteria to be optimized depends on (among other things) the particular ID algorithm and parametrization being used. Two parametric techniques are the focus of this presentation: recursive prediction error method (RPEM) and maximum likelihood estimation (MLE).

Bayard, David S.↗
NASA NTRSDate not supplied

End-to-End Mission Design & Trajectory Optimization

The ability to compute end-to-end mission optimized trajectories is a critical component needed for the next generation of complex human spaceflight design and operations (Orion, HLS, Gateway, Mars). This project created a new interface for two of NASA’s trajectory tools: Copernicus and Genesis, enabling them to be used together for end-to-end mission design and optimization of all flight phases, including Earth ascent, lunar ascent, rendezvous, and lunar descent. This capability can also serve as a pathfinder for developing a future autonomous, onboard trajectory optimizer.

Software↗
NASA NTRSDate not supplied

End-to-End Mission Design & Trajectory Optimization

The ability to compute end-to-end mission optimized trajectories is a critical component needed for the next generation of complex human spaceflight design and operations (Orion, HLS, Gateway, Mars). This project created a new interface for two of NASA’s trajectory tools: Copernicus and Genesis, enabling them to be used together for end-to-end mission design and optimization of all flight phases, including Earth ascent, lunar ascent, rendezvous, and lunar descent. This capability can also serve as a pathfinder for developing a future autonomous, onboard trajectory optimizer.

Software↗
NASA NTRS1982

Stress constraints in optimality criteria design

Procedures described emphasize the processing of stress constraints within optimality criteria designs for low structural weight with stress and compliance constraints. Prescreening criteria are used to partition stress constraints into either potentially active primary sets or passive secondary sets that require minimal processing. Side constraint boundaries for passive constraints are derived by projections from design histories to modify conventional stress-ratio boundaries. Other procedures described apply partial structural modification reanalysis to design variable groups to correct stress constraint violations of unfeasible designs. Sample problem results show effective design convergence and, in particular, advantages for reanalysis in obtaining lower feasible design weights.

Levy, R.↗
NASA NTRS1992

Aerodynamic design and optimization in one shot

This paper describes an efficient numerical approach for the design and optimization of aerodynamic bodies. As in classical optimal control methods, the present approach introduces a cost function and a costate variable (Lagrange multiplier) in order to achieve a minimum. High efficiency is achieved by using a multigrid technique to solve for all the unknowns simultaneously, but restricting work on a design variable only to grids on which their changes produce nonsmooth perturbations. Thus, the effort required to evaluate design variables that have nonlocal effects on the solution is confined to the coarse grids. However, if a variable has a nonsmooth local effect on the solution in some neighborhood, it is relaxed in that neighborhood on finer grids. The cost of solving the optimal control problem is shown to be approximately two to three times the cost of the equivalent analysis problem. Examples are presented to illustrate the application of the method to aerodynamic design and constraint optimization.

Ta'asan, Shlomo↗
NASA NTRS2002

Probabilistic Design of a Plate-Like Wing to Meet Flutter and Strength Requirements

An approach is presented for carrying out reliability-based design of a metallic, plate-like wing to meet strength and flutter requirements that are given in terms of risk/reliability. The design problem is to determine the thickness distribution such that wing weight is a minimum and the probability of failure is less than a specified value. Failure is assumed to occur if either the flutter speed is less than a specified allowable or the stress caused by a pressure loading is greater than a specified allowable. Four uncertain quantities are considered: wing thickness, calculated flutter speed, allowable stress, and magnitude of a uniform pressure load. The reliability-based design optimization approach described herein starts with a design obtained using conventional deterministic design optimization with margins on the allowables. Reliability is calculated using Monte Carlo simulation with response surfaces that provide values of stresses and flutter speed. During the reliability-based design optimization, the response surfaces and move limits are coordinated to ensure accuracy of the response surfaces. Studies carried out in the paper show the relationship between reliability and weight and indicate that, for the design problem considered, increases in reliability can be obtained with modest increases in weight.

Stroud, W. Jefferson↗
NASA NTRS1992

On the use of ANN interconnection weights in optimal structural design

The present paper describes the use of interconnection weights of a multilayer, feedforward network, to extract information pertinent to the mapping space that the network is assumed to represent. In particular, these weights can be used to determine an appropriate network architecture, and an adequate number of training patterns (input-output pairs) have been used for network training. The weight analysis also provides an approach to assess the influence of each input parameter on a selected output component. The paper shows the significance of this information in decomposition driven optimal design.

Hajela, P.↗
NASA NTRS2019

Optimal Control within the Context of Multidisciplinary Design, Analysis, and Optimization

Multidisciplinary design, analysis and optimization involves modeling the interactions of complex systems across a variety of disciplines. The optimization of such systems can be a computationally expensive exercise with multiple levels of nested nonlinear solvers running under an optimizer.The application of optimal control in project development often involves performing trajectory optimization for fixed vehicle designs or parametric sweeps across some key vehicle properties.This information is then relayed to the subsystem design teams who update their designs and relay some bulk characteristics back to the trajectory optimization procedure.This iteration is then repeated until the design closes.However, with increasing interest in more tightly coupled systems, such as electric and hybrid-electric aircraft propulsion and boundary layer ingestion, this process is prone to ignore subtle coupling between vehicle subsystem designs and vehicle operation on a given mission.Integrating trajectory optimization into a tightly coupled multidisciplinary design procedure can be computationally prohibitive, depending on the complexity of the subsystem analyses and the optimal control technique applied.To address these issues a new optimal control software tool, Dymos, has been developed.Dymos is built upon NASA's OpenMDAO software and can leverage its capabilities to efficiently compute gradients for the optimization and optimize complex models in parallel on distributed memory systems.This report provides some explanation into the numerical methods employed in Dymos and provides several use cases that demonstrate its performance on traditional optimal control problems and improvements ino techniques have been used extensively in recent decades to solve a variety of optimal control problems, typically in the form of aerospace vehicle trajectory optimization.

pseudospectral↗
NASA NTRS1984

Simultaneous analysis and design

Optimization techniques are increasingly being used for performing nonlinear structural analysis. The development of element by element (EBE) preconditioned conjugate gradient (CG) techniques is expected to extend this trend to linear analysis. Under these circumstances the structural design problem can be viewed as a nested optimization problem. There are computational benefits to treating this nested problem as a large single optimization problem. The response variables (such as displacements) and the structural parameters are all treated as design variables in a unified formulation which performs simultaneously the design and analysis. Two examples are used for demonstration. A seventy-two bar truss is optimized subject to linear stress constraints and a wing box structure is optimized subject to nonlinear collapse constraints. Both examples show substantial computational savings with the unified approach as compared to the traditional nested approach.

Haftka, R. T.↗
NASA NTRS1985

Simultaneous analysis and design

Optimization techniques are increasingly being used for performing nonlinear structural analysis. The development of element by element (EBE) preconditioned conjugate gradient (CG) techniques is expected to extend this trend to linear analysis. Under these circumstances the structural design problem can be viewed as a nested optimization problem. There are computational benefits to treating this nested problem as a large single optimization problem. The response variables (such as displacements) and the structural parameters are all treated as design variables in a unified formulation which performs simultaneously the design and analysis. Two examples are used for demonstration. A seventy-two bar truss is optimized subject to linear stress constraints and a wing box structure is optimized subject to nonlinear collapse constraints. Both examples show substantial computational savings with the unified approach as compared to the traditional nested approach.

Haftka, R. T.↗
NASA NTRS1990

Constrained optimization using design of experiment surfaces

An algorithm for solving constrained optimization problems is presented. First, design of experiment techniques are used to survey the design space. After evaluating the objective and constraint functions, as specified by Taguchi orthogonal arrays, analytical models of these functions are generated using a least-squares regression analysis. Next, a nonlinear programming package is used to optimize the analytical model. Based on the optimization information, the design space is reduced so as to close in around the minimum, and the entire procedure is repeated until convergence. An important feature of the algorithm is that function gradients are not required; therefore, for problems in which gradients would have to be estimated using finite-differences the number of function evaluations required for the optimization is significantly reduced, when compared with traditional nonlinear programming techniques. In addition, there is no requirement that the gradients must be smooth and continuous.

Bolt, Marvin Vance↗
NASA NTRS1991

Design and optimization of a self-deploying PV tent array

A study was performed to design a self-deploying tent shaped PV (photovoltaic) array and optimize the design for maximum specific power. Each structural component of the design was analyzed to determine the size necessary to withstand the various forces it would be subjected to. Through this analysis the component weights were determined. An optimization was performed to determine the array dimensions and blanket geometry which produce the maximum specific power for a given PV blanket. This optimization was performed for both Lunar and Martian environmental conditions. The performance specifications for the array at both locations and with various PV blankets were determined.

Colozza, Anthony J.↗
NASA NTRS1996

New Approaches to HSCT Multidisciplinary Design and Optimization

The successful development of a capable and economically viable high speed civil transport (HSCT) is perhaps one of the most challenging tasks in aeronautics for the next two decades. At its heart it is fundamentally the design of a complex engineered system that has significant societal, environmental and political impacts. As such it presents a formidable challenge to all areas of aeronautics, and it is therefore a particularly appropriate subject for research in multidisciplinary design and optimization (MDO). In fact, it is starkly clear that without the availability of powerful and versatile multidisciplinary design, analysis and optimization methods, the design, construction and operation of im HSCT simply cannot be achieved. The present research project is focused on the development and evaluation of MDO methods that, while broader and more general in scope, are particularly appropriate to the HSCT design problem. The research aims to not only develop the basic methods but also to apply them to relevant examples from the NASA HSCT R&D effort. The research involves a three year effort aimed first at the HSCT MDO problem description, next the development of the problem, and finally a solution to a significant portion of the problem.

Schrage, D. P.↗