Search NASA⌕ Search

SEARCH · Search NASA

Results for “Dynamic Density”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Effect of off-diagonal elements in the Wannier Hamiltonian on DFT + DMFT for low-symmetry materials: Study of Li 2 MnO 3

Here, we study the effect of the off-diagonal elements of the Wannier Hamiltonian on the electronic structure of the low-symmetry material Li 2 MnO 3 ( C2/m ), using dynamical mean field theory calculations with a continuous-time quantum Monte Carlo impurity solver. The presence of significant off-diagonal elements leads to a pronounced suppression of the energy gap. The off-diagonal elements are largest when the Wannier projection is used based on the global coordinate, and they remain substantial even with the projection using the local coordinate close to the direction of Mn-O bonds. We show that the energy gap is enhanced by the diagonalization of the Mn d block in the full p-d Hamiltonian with the application of a unitary rotation matrix. Additionally, the inclusion of small double counting energy is crucial for achieving the experimental gap by reducing p-d hybridization. Furthermore, we establish the efficiency of a low-energy (d-only basis) model for studying the electronic structure of Li 2 MnO 3 , as the Wannier basis represents a hybridized state of Mn d and O p orbitals. These findings suggest an appropriate approach for investigating low-symmetry materials using the density functional theory plus dynamical mean field theory (DFT + DMFT) method. We also find that the antiferromagnetic ground state $\Gamma$ 2u is stable with U ≤ 2 eV within density functional theory+$U$ calculations, which is much smaller than the widely used U = 5 eV.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Photoemission and dynamical mean field theory study of electronic correlations in a t 2 g 5 metal SrRhO 3 thin film

Perovskite rhodates are characterized by intermediate strengths of both electronic correlation as well as spin-orbit coupling (SOC) and usually behave as moderately correlated metals. A recent publication on epitaxial SrRhO 3 thin films reported a bad-metallic behavior and suggested the occurrence of antiferromagnetism below 100 K. In this work, we have further studied this SrRhO 3 thin film by hard x-ray photoemission spectroscopy and found a very small density of states (DOS) at the Fermi level $(E_F)$, which is consistent with the previously reported bad-metallic behavior. However, the absence of DOS persists up to room temperature, which contradicts the explanation of antiferromagnetic transition at ~100 K. We also employed electronic structure calculations within the framework of density functional theory and dynamical mean-field theory. In contrast to the photoemission results, our calculations indicate metallic behaviors of both bulk SrRhO 3 and the SrRhO 3 thin film, and a stronger correlation effect was observed in the thin film than that in the bulk. The calculated uniform magnetic susceptibility is substantially larger in the thin film than that in the bulk. We also investigated the role of SOC and found only a moderate modulation of the band structure. Hence SOC is not expected to significantly affect the electronic correlation in SrRhO 3 . Extrinsic effects of finite-thickness effects beyond our calculations and localization effects may play important roles to induce the negligible spectral weight at $(E_F)$.

36 MATERIALS SCIENCE↗
NASA NTRS1981

Density measurement in air with a saturable absorbing seed gas

Resonantly enhanced scattering from the iodine molecule is studied experimentally for the purpose of developing a scheme for the measurement of density in a gas dynamic flow. A study of the spectrum of iodine, the collection of saturation data in iodine, and the development of a mathematical model for correlating saturation effects were pursued for a mixture of 0.3 torr iodine in nitrogen and for mixture pressures up to one atmosphere. For the desired pressure range, saturation effects in iodine were found to be too small to be useful in allowing density measurements to be made. The effects of quenching can be reduced by detuning the exciting laser wavelength from the absorption line center of the iodine line used (resonant Raman scattering). The signal was found to be nearly independent of pressure, for pressures up to one atmosphere, when the excitation beam was detuned 6 GHz from line center for an isolated line in iodine. The signal amplitude was found to be nearly equal to the amplitude for fluorescence at atmospheric pressure, which indicates a density measurement scheme is possible.

Baganoff, D.↗
DOE OSTI2022

Electron dynamics in extended systems within real-time time-dependent density-functional theory

Due to a beneficial balance of computational cost and accuracy, real-time time-dependent density-functional theory has emerged as a promising first-principles framework to describe electron real-time dynamics. Here we discuss recent implementations around this approach, in particular in the context of complex, extended systems. Results include an analysis of the computational cost associated with numerical propagation and when using absorbing boundary conditions. Here we extensively explore the shortcomings for describing electron–electron scattering in real time and compare to many-body perturbation theory. Modern improvements of the description of exchange and correlation are reviewed. In this work, we specifically focus on the Qb@ll code, which we have mainly used for these types of simulations over the last years, and we conclude by pointing to further progress needed going forward.

2D materials↗
DOE OSTI2026

Ab Initio Modeling of Aqueous Methanol Mixtures at DFT-SCAN Level Using Machine Learning Interatomic Potentials

Abstract Methanol–water mixtures find use in many applications, particularly catalytic energy conversion processes. Their importance has motivated numerous computational studies, most of which employed molecular dynamics based on classical force fields. These enable simulations of large systems on long time scales but do not reliably describe reactive dynamics involving bond breaking and bond formation. In contrast, ab initio molecular dynamics (AIMD) based on density functional theory (DFT) is generally more reliable for such applications but has a high computational cost, which discourages systematic studies of alcohol-water mixtures. To remedy this, we trained a machine learning interatomic potential capable of probing the properties of aqueous methanol mixtures at the DFT level using the SCAN functional. Our results show that SCAN qualitatively reproduces multiple key experimental features arising from the amphiphilic nature of methanol, including density, diffusion coefficients, X-ray structure factors, and Kirkwood–Buff integrals. We also find that structural correlations between water molecules are somewhat overestimated, leading to a stronger preferential association than that predicted by experiments. However, increasing the temperature by 30 K mitigates this effect and also recovers the correct mobilities of both methanol and water. These results indicate that SCAN provides an accurate description of methanol–water mixtures, making it a reliable choice for investigating the reactive dynamics in such systems.

Park, Sanghyun J. [Princeton University , , , ,]↗
NASA NTRS2003

New Type of the Interface Evolution in the Richtmyer-Meshkov Instability

We performed systematic theoretical and numerical studies of the nonlinear large-scale coherent dynamics in the Richtmyer-Meshkov instability for fluids with contrast densities. Our simulations modeled the interface dynamics for compressible and viscous uids. For a two-fluid system we observed that in the nonlinear regime of the instability the bubble velocity decays and its surface attens, and the attening is accompanied by slight oscillations. We found the theoretical solution for the system of conservation laws, describing the principal influence of the density ratio on the motion of the nonlinear bubble. The solution has no adjustable parameters, and shows that the attening of the bubble front is a distinct property universal for all values of the density ratio. This property follows from the fact that the RM bubbles decelerate. The theoretical and numerical results validate each other, describe the new type of the bubble front evolution in RMI, and identify the bubble curvature as important and sensitive diagnostic parameter.

Abarzhi, S. I.↗
DOE OSTI2025

The classical equations of motion of quantized gauge theories, Part 2: Electromagnetism

In this and companion papers, we show that quantum field theories with gauge symmetries permit a broader class of classical dynamics than typically assumed. In this article, we show that the quantization of electromagnetism permits the existence of classical electric field states that do not obey Gauss’s law. These states are gauge invariant and their time evolution can be consistently described using the Schrödinger equation. The time evolution of these states is such that at the classical level, the full set of Maxwell’s equations would appear to hold, with the physical effects of these states being attributable to an auxiliary, static “shadow” charge density with no internal degrees of freedom. This density could affect the dynamics of charged particles in our universe and it may thus be of observational interest.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2023

Dynamics of multilayer Rayleigh–Taylor instability at moderately high Atwood numbers

This paper investigates the multilayer Rayleigh–Taylor instability (RTI) using statistically stationary experiments conducted in a gas tunnel. Employing diagnostics such as particle image velocimetry (PIV) and planar laser induced fluorescence (PLIF), we make simultaneous velocity–density measurements to study how dynamics and mixing are linked in this variable density flow. Experiments are conducted in a newly built, blow-down three-layer gas tunnel facility. Mixing between three gas streams is studied, where the top and bottom streams are comprised of air, and the middle stream is an air–helium mixture. Shear is minimized between these streams by matching their inlet velocities. The four experimental conditions investigated here consist of two different density ratios (Atwood numbers 0.3 and 0.6), each investigated at two instability development times (or equivalently, two streamwise locations), and all experiments are with the same middle stream thickness of 3 cm. The growth of the middle layer is measured using laser-based planar Mie scattering visualization. The mixing width is found to grow linearly with time at late times. Various quantitative measures of molecular mixing indicate a very high degree of molecular mixing at late times in the multilayer RTI flow. The vertical turbulent mass flux $a_y$ is calculated. In addition to mostly negative values of $a_y$ , typical of buoyancy-dominated flows due to negative correlation between velocity and density fluctuations, positive regions are also observed in profiles of $a_y$ due to entrainment and erosion at the lower edge of the mixing region. Global energy budgets are calculated for the multilayer RTI flow at late times and it is found that the majority of potential energy released has been dissipated due to viscous effects, and a large value of mixing efficiency ( $\sim$ 60 %) is observed.

Mechanics↗
DOE OSTI2025

Learning robust parameter inference and density reconstruction in flyer plate impact experiments

Estimating physical parameters or material properties from experimental observations is a common objective in many areas of physics and material science. In many experiments, especially in shock physics, radiography is the primary means of observing the system of interest. However, radiography does not provide direct access to key state variables, such as density, which prevents the application of traditional parameter estimation approaches. Here we focus on flyer plate impact experiments on porous materials, and resolving the underlying parameterized equation of state (EoS) and crush porosity model parameters given radiographic observation(s). We use machine learning as a tool to demonstrate with high confidence that using only high impact velocity data does not provide sufficient information to accurately infer both EoS and crush model parameters, even with fully resolved density fields or a dynamic sequence of images. We thus propose an observable data set consisting of low and high impact velocity experiments/simulations that capture different regimes of compaction and shock propagation, and proceed to introduce a generative machine learning approach which produces a posterior distribution of physical parameters directly from radiographs. We demonstrate the effectiveness of the approach in estimating parameters from simulated flyer plate impact experiments, and show that the obtained estimates of EoS and crush model parameters can then be used in hydrodynamic simulations to obtain accurate and physically admissible density reconstructions. Finally, we examine the robustness of the approach to model mismatches, and find that the learned approach can provide useful parameter estimates in the presence of out-of-distribution radiographic noise and previously unseen physics, thereby promoting a potential breakthrough in estimating material properties from experimental radiographic images.

97 MATHEMATICS AND COMPUTING↗
NASA NTRS2016

Secure Mass Measurements From Transit Timing: 10 Kepler Exoplanets Between 3 and 8M⊕ with Diverse Densities and Incident Fluxes

We infer dynamical masses in eight multiplanet systems using transit times measured from Keplerʼs complete dataset, including short-cadence data where available. Of the 18 dynamical masses that we infer, 10 pass multiple tests for robustness. These are in systems Kepler-26 (KOI-250), Kepler-29 (KOI-738), Kepler-60 (KOI-2086), Kepler-105 (KOI-115), and Kepler-307 (KOI-1576). Kepler -105 c has a radius of 1.3R⊕ and a density consistent with an Earth-like composition. Strong transit timing variation (TTV) signals were detected from additional planets, but their inferred masses were sensitive to outliers or consistent solutions could not be found with independently measured transit times, including planets orbiting Kepler-49 (KOI-248), Kepler-57 (KOI-1270), Kepler-105 (KOI-115), and Kepler-177 (KOI-523). Nonetheless, strong upper limits on the mass of Kepler-177 cimply an extremely low density of 0.1 g cm−3. In most cases, individual orbital eccentricities were poorly constrained owing to degeneracies in TTV inversion. For five planet pairs in our sample, strong secular interactions imply a moderate to high likelihood of apsidal alignment over a wide range of possible eccentricities. We also find solutions for the three planets known to orbit Kepler-60 in a Laplace-like resonance chain. However, nonlibrating solutions also match the transit timing data. For six systems, we calculate more precise stellar parameters than previously known, enabling useful constraints on planetary densities where we have secure mass measurements. Placing these exoplanets on the mass–radius diagram, we find that a wide range of densities is observed among sub-Neptune-mass planets and that the range in observed densities is anticorrelated with incident flux.

Stars individual↗
NASA NTRS1989

Design and development of a facility for compressible dynamic stall studies of a rapidly pitching airfoil

A facility for the study of dynamic stall of an airfoil undergoing a transient ramp-type pitching motion is described. The facility can produce pitch rates of 3600 deg/sec to an angle of attack of 60 deg by using a specially designed hydraulic drive with feedback control. The ramp motion generator can also generate arbitrary motion of the airfoil and thus can simulate an arbitrary aircraft maneuver. A unique airfoil support system allows unobstructed flow visualization including the complete airfoil contour, thus permitting the use of nonintrusive optical diagnostic methods for flow measurement close to the surface as well as simultaneous far-field measurements. Schlieren pictures obtained during the study reveal the instantaneous density gradients associated with dynamic stall, even under conditions of very low Mach numbers.

Chandrasekhara, M. S.↗
DOE OSTI2026

Real-Space Constrained Density Functional Theory Investigation of Site-Specific, Interfacial Charge Recombination Dynamics Across the Au Nanoparticle/TiO 2 Heterojunction

Au nanoparticle (NP)/TiO 2 heterojunction is a representative system to study interfacial charge transfer in photocatalysis and photovoltaics, where suppressing recombination from TiO 2 to Au can enhance hot carrier extraction. We apply real-space constrained density functional theory (CDFT) with Marcus theory to quantify charge recombination time scales across Au/TiO 2 . This approach enables direct control and visualization of charge-separated states, aligning with site-specific probes like time-resolved X-ray photoelectron spectroscopy (trXPS). We find that the charge-separated state features a bipolaron, with recombination dominated by TiO 2 LUMO to Au HOMO transitions, primarily at interfacial Au sites. Marcus rate predictions are benchmarked with surface hopping methods, quantifying differences in time scales and computational efficiency. Lastly, we examine how the Au cluster size affects the free energy change (ΔG) and reorganization energy (λ), explaining trends in closed-shell systems and highlighting challenges for open-shell extrapolations. Overall, CDFT + Marcus theory provides efficient, mechanistically transparent interfacial charge transfer modeling, and we clearly defined its applicability and limitation.

Glenna, Drew M. [Univ. of Idaho, Idaho Falls, ID (↗
NASA NTRS2016

Secure Mass Measurements From Transit Timing: 10 Kepler Exoplanets Between 3 and 8 M⊕ With Diverse Densities and Incident Fluxes

We infer dynamical masses in eight multiplanet systems using transit times measured from Keplerʼs complete data set, including short-cadence data where available. Of the 18 dynamical masses that we infer, 10 pass multiple tests for robustness. These are in systems Kepler-26 (KOI-250), Kepler-29 (KOI-738), Kepler-60 (KOI-2086), Kepler-105 (KOI-115), and Kepler-307 (KOI-1576). Kepler-105 c has a radius of 1.3 R(sub ⨁) and a density consistent with an Earth-like composition. Strong transit timing variation (TTV) signals were detected from additional planets, but their inferred masses were sensitive to outliers or consistent solutions could not be found with independently measured transit times, including planets orbiting Kepler-49 (KOI-248), Kepler-57 (KOI-1270), Kepler-105 (KOI-115), and Kepler-177 (KOI-523). Nonetheless, strong upper limits on the mass of Kepler-177 c imply an extremely low density of ∽0.1 g cm(exp −3). In most cases, individual orbital eccentricities were poorly constrained owing to degeneracies in TTV inversion. For five planet pairs in our sample, strong secular interactions imply a moderate to high likelihood of apsidal alignment over a wide range of possible eccentricities. We also find solutions for the three planets known to orbit Kepler-60 in a Laplace-like resonance chain. However, nonlibrating solutions also match the transit timing data. For six systems, we calculate more precise stellar parameters than previously known, enabling useful constraints on planetary densities where we have secure mass measurements. Placing these exoplanets on the mass–radius diagram, we find that a wide range of densities is observed among sub-Neptune-mass planets and that the range in observed densities is anticorrelated with incident flux.

Individual stars↗
NASA NTRS2017

Observations of Deep Ionospheric F-Region Density Depletions with FPMU Instrumentation and their Relationship with the Global Dynamics of the June 22-23, 2015 Geomagnetic Storm

The magnetic storm that commenced on June 22-23, 2015 was one of the largest storms in our current solar cycle, resulting from an active region on the Sun that produced numerous coronal mass ejections (CMEs) and associated interplanetary shock waves. On June 22 at 18:36 UT the magnetosphere was impacted by the shock wave on the magnetosphere. Observations from several spacecraft observed the dynamic response of the magnetosphere and ionosphere. MMS observatories in the near earth tail These low altitude measurements are correlated in the magnetosphere with particle flux dropouts measured by MMS We follow the timing of this storm in the ionosphere with the density depletions throughout the ISS orbits, DMSP drift velocities, and enhanced AMPERE Birkland currents. Together these observations and simulation results will be assembled to provide each region's context to the global dynamics and time evolution of the storm. The models during these event support and flesh out the puzzle of the global dynamics.

Coffey, Victoria↗
NASA NTRS2010

Physics of Life: A Model for Non-Newtonian Properties of Living Systems

This innovation proposes the reconciliation of the evolution of life with the second law of thermodynamics via the introduction of the First Principle for modeling behavior of living systems. The structure of the model is quantum-inspired: it acquires the topology of the Madelung equation in which the quantum potential is replaced with the information potential. As a result, the model captures the most fundamental property of life: the progressive evolution; i.e. the ability to evolve from disorder to order without any external interference. The mathematical structure of the model can be obtained from the Newtonian equations of motion (representing the motor dynamics) coupled with the corresponding Liouville equation (representing the mental dynamics) via information forces. All these specific non-Newtonian properties equip the model with the levels of complexity that matches the complexity of life, and that makes the model applicable for description of behaviors of ecological, social, and economical systems. Rather than addressing the six aspects of life (organization, metabolism, growth, adaptation, response to stimuli, and reproduction), this work focuses only on biosignature ; i.e. the mechanical invariants of life, and in particular, the geometry and kinematics of behavior of living things. Living things obey the First Principles of Newtonian mechanics. One main objective of this model is to extend the First Principles of classical physics to include phenomenological behavior on living systems; to develop a new mathematical formalism within the framework of classical dynamics that would allow one to capture the specific properties of natural or artificial living systems such as formation of the collective mind based upon abstract images of the selves and non-selves; exploitation of this collective mind for communications and predictions of future expected characteristics of evolution; and for making decisions and implementing the corresponding corrections if the expected scenario is different from the originally planned one. This approach postulates that even a primitive living species possesses additional, non-Newtonian properties that are not included in the laws of Newtonian or statistical mechanics. These properties follow from a privileged ability of living systems to possess a self-image (a concept introduced in psychology) and to interact with it. The proposed mathematical system is based on the coupling of the classical dynamical system representing the motor dynamics with the corresponding Liouville equation describing the evolution of initial uncertainties in terms of the probability density and representing the mental dynamics. The coupling is implemented by the information-based supervising forces that can be associated with self-awareness. These forces fundamentally change the pattern of the probability evolution, and therefore, lead to a major departure of the behavior of living systems from the patterns of both Newtonian and statistical mechanics. This innovation is meant to capture the signature of life based only on observable behavior, not on any biochemistry. This will not prevent the use of this model for developing artificial living systems, as well as for studying some general properties of behavior of natural, living systems.

Zak, Michail↗
DOE OSTI2025

Viscosity-Controlled Thiol–Ene Reaction and Its Impact on Mechanical Response of Dynamic Networks

The impact of curing conditions on the final properties of thioester-thiol-based dynamic polymer networks was systematically investigated. Despite identical monomer and cross-linker compositions, networks synthesized in the absence of solvent exhibited significantly higher shear moduli and longer relaxation times compared to those cured in solvent. These differences arise from viscosity-controlled photoinitiated thiol–ene reactions, where reduced chain mobility under solvent-free conditions suppresses termination between two polymer radicals, leading to higher reaction conversion. Fourier Transform Infrared (FTIR) spectroscopy and solid-state NMR (ssNMR) spectroscopy confirmed a greater degree of “click” reaction completion in higher viscosity environments. Control experiments revealed that prolonged radical lifetimes and suppressed termination reactions under solvent-free curing conditions contribute to these variations. Here, this study highlights the crucial role of processing conditions in determining cross-link density and, consequently, the dynamic mechanical behavior of polymer networks. It demonstrates that, beyond polymer chemistry, dynamic cross-linker design, and phase separation, curing conditions serve as a key design parameter for tailoring material performance to specific applications.

polymers↗