Search NASA⌕ Search

SEARCH · Search NASA

Results for “ELECTRIC PROPERTY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29

Effect of ZnO addition on the sintering and electrical properties of (Mn,W)-doped PZT-PMS-PZN ceramics

The effect of ZnO addition on the phase structure, microstructure and dielectric and piezoelectric properties of 0.2 wt.% MnO{sub 2} and 0.6 wt.% WO{sub 3}-doped Pb(Zr{sub 0.52}Ti{sub 0.48})O{sub 3}-Pb(Mn{sub 1/3}Sb{sub 2/3})O{sub 3}-Pb(Zn{sub 1/3}Nb{sub 2/3})O{sub 3} (PZT-PMS-PZN) ceramics was investigated. X-ray diffraction shows that the phase structure of ceramics is transformed from rhombohedral to tetragonal with the increasing of ZnO addition. The bulk density significantly increases when ZnO is added and then it slightly decreases for ZnO addition above 0.2 wt.%. SEM micrographs show the grains of ceramics are uniform and well developed by adding 0.1 wt.% ZnO. The Curie temperature (T{sub c}) of 270 deg. C is obtained at the 0.1 wt.% ZnO addition. Mechanical quality factor (Q{sub m}), electromechanical coupling factor (K{sub p}) and piezoelectric constant (d{sub 33}) increase firstly, and then decrease with the increasing of ZnO addition, while dielectric loss tan {delta} drops all the time. The Q{sub m}, K{sub p}, d{sub 33}, tan {delta} and T{sub c} of the ceramics show the optimum values of 1899, 0.55, 300 (pC/N), 0.0063 and 270 deg. C, respectively, at the lower sintering temperature of 1120 deg. C and with 0.1 wt.% ZnO addition.

36 MATERIALS SCIENCE↗

Controlling potential barrier height by changing V-shaped pit size and the effect on optical and electrical properties for InGaN/GaN based light-emitting diodes

The internal quantum efficiency (IQE) of InGaN/GaN multiple quantum wells (MQWs) with blue light emission was improved by inserting an InGaN/GaN superlattice (SL) beneath the MQWs. While the SL technique is useful for improving the light-emitting diode (LED) performance, its effectiveness from a multilateral point of view requires investigation. V-shaped pits (V-pits), which generate a potential barrier and screen the effect of the threading dislocation, are one of the candidates for increasing the light emission efficiency of LEDs exceptionally. In this research, we investigated the relationship between the V-pit and SL and revealed that the V-pit diameter is strongly correlated with the IQE by changing the number of SL periods. Using scanning near-field optical microscopy and photoluminescence measurements, we demonstrated the distinct presence of the potential barrier formed by the V-pits around the dislocations. The relationship between the V-pit and the number of SL periods resulted in changing the potential barrier height, which is related to the V-pit diameter determined by the number of SL periods. In addition, we made an attempt to insert pit expansion layers (PELs) composed of combination of SL and middle temperature grown GaN layer instead of only SL structure. As a result of the evaluation of LEDs using SL or PEL, the EL intensity was strongly related to pit diameter regardless of the structures to form the V-pits. In addition, it was clear that larger V-pits reduce the efficiency droop, which is considered to be suppression of the carrier loss at high injection current.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Synthesis and electrical properties of scheelite Ca{sub 1-x}Sm{sub x}MoO{sub 4+{delta}} solid electrolyte ceramics

Graphical abstract: Scheelite-type Ca{sub 1-x}Sm{sub x}MoO{sub 4+{delta}} electrolyte ceramics can be considered as one of the best candidates to replace the YSZ electrolyte materials for SOFCs because of their high oxide ion conduction. Research highlights: {yields} Sm{sub x}Ca{sub 1-x}MoO{sub 4+{delta}} solid electrolyte with a tetragonal scheelite structure. {yields} Sm{sub x}Ca{sub 1-x}MoO{sub 4+{delta}} electrolyte is one of the best candidates to replace the YSZ electrolyte for SOFCs because of their high oxide ion conduction. {yields} The sintering temperature is greatly lower than traditional YSZ electrolyte. -- Abstract: Scheelite-type Ca{sub 1-x}Sm{sub x}MoO{sub 4+{delta}} electrolyte powders were prepared by the sol-gel auto-combustion process. The crystal structure of the samples was determined by employing the techniques of X-ray diffraction (XRD). According to the XRD analysis, the formed continuous series of Ca{sub 1-x}Sm{sub x}MoO{sub 4+{delta}} (0 {<=} x {<=} 0.3) solid solutions had the structure of tetragonal scheelite, and the lattice parameters increased with increasing x in the Sm-substituted system. Results of sinterability and electrochemical testing revealed that the performances of Sm-doped calcium molybdate were superior to that of pure CaMoO{sub 4}. Ca{sub 1-x}Sm{sub x}MoO{sub 4+{delta}} ceramics show higher sinterability, and the Ca{sub 0.8}Sm{sub 0.2}MoO{sub 4+{delta}} sample with 98.7% of the theoretical density were obtained after being sintered at 1250 {sup o}C for 4 h. The conductivity increased with increasing samarium content, and a total conductivity 9.54 x 10{sup -3} S cm{sup -1} at 800 {sup o}C could be obtained in Ca{sub 0.8}Sm{sub 0.2}MoO{sub 4+{delta}} sintered at 1250 {sup o}C for 4 h.

36 MATERIALS SCIENCE↗

Crystal Structure, Magnetic and Electrical Properties of Half-Doped Chromium Manganite La{sub 0.5}Sr{sub 0.5}Mn{sub 0.5}Cr{sub 0.5}O{sub 3}

Polycrystalline sample La{sub 0.5}Sr{sub 0.5}Mn{sub 0.5}Cr{sub 0.5}O{sub 3} (LSMCO) was prepared by a conventional solid-state reaction method in the air, and its structure was determined by Rietveld refinement using consistent resolution time-of-flight X-ray diffraction. Different structural models have been used for analysis of X-ray diffraction data recorded at room temperature, but the best fits have been found using a mixture of rhombohedral and an orthorhombic structural phases (42(1)%/57(1)%). The rhombohedral, centro-symmetric space group R 3-bar c(No.167,a≈√2a{sub p},c≈2√3a{sub p},Z=6) with octahedral tilting scheme a{sup −}a{sup −}a{sup −} leading to a three identical out-of-phase tilt angle of (Mn/Cr)-O{sub 6} octahedron along three perovskite main directions: x, y, and z-axes. The orthorhombic space group Pbnm(No.62,a≈b≈√2a{sub p},c≈2a{sub p},Z=4) with octahedral tilting scheme a{sup −}a{sup −}c{sup +}, leads to an anti-phase tilts of the same magnitude about [100] and [010] directions of the elementary specimen cell and in-phase tilt of different magnitude about the [001] direction. At low temperature 10 K, Rietveld refinement of powder diffraction data revealed that the crystal structure of sample is distorted with a single orthorhombic symmetry (space group Pbnm). Magnetic measurements indicate that our investigated sample exhibits an overall anti-ferromagnetic behavior mainly attributed to the frustration induced by both competing AFM Cr{sup 3+}-O-Cr{sup 3+}, Mn{sup 4+}-O-Mn{sup 4+} networks, and the mixed one Mn{sup 4+}-O-Cr{sup 3+}exchange magnetic interactions. The temperature dependence of the resistivity measured under zero field shows a semi-conducting behavior in the whole temperature range, which probably could be described by the adiabatic small polaron hoping model with relatively high polaron activation energy.

36 MATERIALS SCIENCE↗

Influence of combined external stress and electric field on electric properties of 0.5% Fe-doped lead zirconate titanate ceramics

Influence of uniaxial pressure (0-1000 bars) applied parallel to or perpendicularly to the ac or dc electric field (in one-dimensional or two-dimensional manner) on dielectric and ferroelectric properties of hard lead zirconate titanate (PZT) ceramics were investigated. The experimental results revealed that applying uniaxial pressure leads to a reduction in the peak intensity of the electric permittivity (epsilon), of the frequency dispersion as well as of the dielectric hysteresis. Moreover, with increasing pressure the peak intensity of epsilon becomes diffused and shifts to a higher temperature. It was also found that simultaneous application of uniaxial pressure and electric field (perpendicular to each other) in the poling process improves the ferroelectric properties. This indeed indicates new possibility for poling materials with a high coercive field and/or high electric conductivity. The effects of uniaxial load are weaker than that obtained for soft PZT ceramics. It was concluded that applying uniaxial pressure induces similar effects as increasing the Ti ion concentration in PZT system. The obtained results were interpreted through Cochran soft mode and domain switching processes under applying of pressure.

36 MATERIALS SCIENCE↗

Apparatus for measuring electrical properties of materials

Resistance of sample is measured with aid of usual electrical test instruments applied to electrical contacts provided at ram and anvil assemblies. Temperature differential is established between ram and anvil for measurement of Seebeck coefficient. Voltage generated across sample is detected at electrical contacts.

Hadek, V.↗

Electrical Properties and Power Considerations of a Piezoelectric Actuator

This paper assesses the electrical characteristics of piezoelectric wafers for use in aeronautical applications such as active noise control in aircraft. Determination of capacitive behavior and power consumption is necessary to optimize the system configuration and to design efficient driving electronics. Empirical relations are developed from experimental data to predict the capacitance and loss tangent of a PZT5A ceramic as nonlinear functions of both applied peak voltage and driving frequency. Power consumed by the PZT is the rate of energy required to excite the piezoelectric system along with power dissipated due to dielectric loss and mechanical and structural damping. Overall power consumption is thus quantified as a function of peak applied voltage and driving frequency. It was demonstrated that by incorporating the variation of capacitance and power loss with voltage and frequency, satisfactory estimates of power requirements can be obtained. These relations allow general guidelines in selection and application of piezoelectric actuators and driving electronics for active control applications.

Jordan, T.↗

Influence of minor Ce additions on magnetic and electrical properties in Fe–6.5 wt. % Si alloy

Fe–6.5 wt. % Si alloys exhibit lower core loss at higher frequency than the dominating electrical steel containing 3.2% Si due to its lower magneto-crystalline anisotropy energy (MAE) and higher electrical resistivity. However, compared to nanocrystalline and amorphous soft-magnetic materials, 6.5% Si steel, although being cost effective and having high saturation magnetization, still has much to improve, especially with respect to MAE and resistivity. To explore further improvement, the effects of minor Ce additions (due to its mixed valence 4f-electron configuration) on the microstructure, electrical and magnetic behaviors of Fe–6.5 wt. % Si alloys were investigated. Due to its limited solubility in Fe, Ce exhibits condition-dependent effects on electrical resistivity, showing only marginal improvement under rapid solidification. In contrast, Ce addition degrades magnetic performance, reducing saturation magnetization (from 1.86 to 1.76 T) and increasing coercivity (from 88 to 171 A/m), which results in an 83.4% increase in core loss (W 10/1000 condition). Overall, Ce addition provides limited benefit in electrical resistivity while deteriorating magnetic properties, making it ineffective for enhancing the soft magnetic performance of Fe–6.5 wt. % Si alloys.

36 MATERIALS SCIENCE↗

Influence of bath temperatures on physical and electrical properties of potentiostatically deposited Cu{sub 2}O thin films for heterojunction solar cell applications

In the present work, the influence of bath temperatures on structural, morphological, vibrational, optical, electrical and photo response properties of the electrochemically deposited cuprous oxide (Cu{sub 2}O) thin films on fluorine doped tin oxide substrate is extensively investigated with the help of X-ray diffraction (XRD), scanning electron microscopy (SEM), Micro Raman spectroscopy, photo luminescence (PL) spectroscopy, UV–visible spectroscopy, LCR measurement, Keithley 4200 semiconductor characterization system respectively. XRD patterns reveal that the deposited Cu{sub 2}O films have cubic structure grown along the preferential (111) orientation and the film deposited at 40 °C shows better crystalline nature when compared at 55 and 70 °C. The micro structural properties of films such as crystallite size (D), dislocation density (δ), micro strain (ε) and stacking fault probability (α) were calculated and discussed in detail. SEM displays a well-defined three side pyramid shaped morphology for the film deposited at 40 °C. Micro Raman and PL spectra reveal the film deposited at 40 °C by being better crystalline at a higher acceptor concentration. UV–Visible study shows that the optical energy band gap increases from 2.05 to 2.17 eV with an increase in bath temperature from 40 to 70 °C. The frequency-temperature dependence of impedance analysis shows a higher electrical conductivity for a film deposited at 40 °C compared to other bath temperatures. I-V measurement illustrates a good photoconductivity response for Cu{sub 2}O thin film deposited at 40 °C compared to films deposited at 55 and 70 °C.

36 MATERIALS SCIENCE↗

Electrical properties of epoxies and film resistors

The reliability of hybrid microcircuits has been enhanced in recent years by the use of organic adhesives as a replacement for solder and eutectics. The epoxies have been the most effective and widely used material for this application. Methods for measuring the electrical and mechanical properties of epoxies are developed. Data are given for selected conductive adhesives at high and low frequencies. The temperature coefficients of resistance of thick film resistors are presented.

Sergent, J. E.↗

The structural and electrical properties of low-resistance Ni contacts to InP

We have investigated the electrical and metallurgical behavior of the Ni-InP contact system. Specific contact resistivity (Rc) values in the low 10 exp -7 Omega-sq cm range are achieved with Ni-only contacts on n-InP by sintering at 400 C for several minutes. The postsinter contact metallization consists of three layers, arranged in the sequence: InP/Ni3P/Ni2P/In. Extended sintering (40 min) at 400 C brings about a rise in Rc to the 10 exp -4 Omega-sq cm range. After extended sintering, the contact metallization is found to consist of only two layers, arranged in the sequence: InP/Ni2P/In. Based on the correlation between low Rc and the presence of Ni3P at the metal-InP interface, it is suggested that the presence of Ni3P is the cause of the low Rc values. We show that the sintering schedule used to achieve low values of Rc is accompanied by substantial metal-InP interdiffusion that results in severe device degradation.

Fatemi, Navid S.↗

Electrical properties and conduction mechanism study by OLPT model of NaZnPO4 compound

Highlights: • The crystal structure was resolved using Fullproof program. • The conduction in NaZn PO{sub 4} is insured by OLPT model. • Ac conductivity of NaZn PO{sub 4} compound obeys the Joncher’s law. - Abstract: A polycrystalline sample with NaZnPO{sub 4} stoichiometry was synthesized by the conventional solid-state reaction and then identified and characterized by X-ray powder diffraction, Raman spectroscopy and impedance spectroscopy. The X-ray diffraction pattern revealed that the composite represents a single phase that crystallizes in the monoclinic system with a P2{sub 1}/n space group. All vibration modes of tetrahedral PO{sub 4} appeared in the Raman spectrum. Besides, the electrical conductivity behavior of the title compound was analysed as a function of frequency ranging from 209 Hz to 1 MHz and at a temperature interval ranging from 578 K to 728 K by means of impedance spectroscopy to elucidate the conduction mechanism in this compound. The temperature dependence of frequency exponent ′s′ showed that the conduction in NaZnPO{sub 4} is insured by the overlapping large polaron tunneling (OLPT) model. A correlation between electrical and structural properties was also depicted.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Optical and Electrical Properties of III-Nitrides and Related Materials

Among the members of the III-nitride material system, boron-nitride (BN) is the least studied and understood. Its extraordinary physical properties, such as ultra-high chemical stability, thermal conductivity, electrical resistivity, band gap (Eg ~ 6 eV), and optical absorption near the band gap make hexagonal BN (h-BN) the material of choice for emerging applications such as deep ultraviolet (DUV) optoelectronic devices. Moreover, h-BN has a close lattice match to graphene and is the most suitable substrate and dielectric/separation layer for graphene electronics and optoelectronics. Similar to graphene, low dimensional h-BN is expected to possess rich new physics. Other potential applications include super-capacitors and electron emitters. However, our knowledge concerning the semiconducting properties of h-BN is very scarce. The project aims to extend our studies to the “newest” family member of the III-nitride material system, h-BN, and to address issues that have not yet been explored but are expected to profoundly influence our understanding on its fundamental properties and device applications. During the supporting period, we have improved the growth processes of h-BN epilayers by metal organic chemical vapor deposition (MOCVD), investigated the fundamental material properties, and identified several unique features of h-BN as well as critical issues that remain to be addressed.

36 MATERIALS SCIENCE↗

The electrical properties of 60 keV zinc ions implanted into semi-insulating gallium arsenide

The electrical behavior of zinc ions implanted into chromium-doped semiinsulating gallium arsenide was investigated by measurements of the sheet resistivity and Hall effect. Room temperature implantations were performed using fluence values from 10 to the 12th to 10 to the 15th power/sq cm at 60 keV. The samples were annealed for 30 minutes in a nitrogen atmosphere up to 800 C in steps of 200 C and the effect of this annealing on the Hall effect and sheet resistivity was studied at room temperature using the Van der Pauw technique. The temperature dependence of sheet resistivity and mobility was measured from liquid nitrogen temperature to room temperature. Finally, a measurement of the implanted profile was obtained using a layer removal technique combined with the Hall effect and sheet resistivity measurements.

Littlejohn, M. A.↗

Thermal and electrical properties of Evanohm and other resistance alloys below 4 K

Evanohm in the form of a fine wire is widely used in low-temperature experiments. It has a composition of 75% Ni, 20% Cr, 2.5% Cu, and 2.5% Al. The heat capacity of a rod of Evanohm was measured in the temperature range from 0.1 to 1.3 K. It was found that the specific heat of Evanohm does not display the increase found for constantan, manganin, and nichrome at low temperatures. Measurements of the thermal conductivity and the electrical and magnetic properties are also reported.

Cieloszyk, G. S.↗

Effect of Carbon on the Electrical Properties of Copper Oxide-Based Bulk Composites

The effect of carbon filler on the electrical resistance and the thermopower of copper oxide-based composites produced by ceramic technology by hot pressing has been studied. It is found that the dependences of the electrical resistivity on the filler concentration are characteristic by S-like curves that are typical of percolation systems; in this case, the resistivity decreases more substantially as the carbon content increases as compared to the decrease in thermopower value, which is accompanied by the existence of the maximum of the factor of thermoelectric power near the percolation threshold. The studies of the temperature dependences of the resistivity and the thermopower at low temperatures show that, in the range 240–300 K, the predominant mechanism of the electrotransfer of all the composites under study is the hopping mechanism. At temperatures lower than 240 K, the composites with a nanocrystalline CuO matrix have a hopping conductivity with a variable hopping distance over localized states of the matrix near the Fermi level, which is related to the conductivity over intergrain CuO boundaries. A schematic model of the band structure of nanocrystalline CuO with carbon filler is proposed on the base of the analysis of the found experimental regularities of the electrotransfer.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electrical properties of materials for high temperature strain gage applications

A study was done on the electrical resistance of materials that are potentially useful as resistance strain gages at high temperatures under static strain conditions. Initially a number of binary alloys were investigated. Later, third elements were added to these alloys, all of which were prepared by arc melting. Several transition metals were selected for experimentation, most prepared as thin films. Difficulties with electrical contacts thwarted efforts to extend measurements to the targeted 1000 C, but results obtained did suggest ways of improving the electrical resistance characteristics of certain materials.

Brittain, John O.↗