Search NASA⌕ Search

SEARCH · Search NASA

Results for “Effectiveness factor”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29

Nonmagnetic fractional conductance in high mobility InAs quantum point contacts

In this paper, we report the magnetoelectronic properties of high mobility InAs quantum point contacts grown on InP substrates. The InAs quantum well is embedded between In 0.72 ⁢Ga 0.28 ⁢As cladding layers and In 0.81 ⁢Al 0.19 ⁢As barrier layers, and is populated via self-accumulation. The one-dimensional (1D) conductance reaches a maximum value of 17 plateaus, quantized in units of 2⁢𝑒 2 /ℎ, where 𝑒 is the fundamental unit of charge and ℎ is Planck's constant. The in-plane effective 𝑔 factor was estimated to be −10.9 ± 1.5 for subband 𝑁 = 1 and −10.8 ± 1.6 for subband 𝑁 = 2. Furthermore, a study of the nonmagnetic fractional conductance states at 0.2 (𝑒 2 /ℎ) and 0.1 (𝑒 2 /ℎ) is provided. While their origin remains under discussion, evidence suggests that they arise from strong electron-electron interactions and momentum-conserving backscattering between electrons in two distinct channels within the 1D region. This phenomenon may also be interpreted as an entanglement between the two channel directions facilitated by momentum-conserving backscattering.

Ballistic transport↗

Measuring the Lower Critical Field of Superconductors Using Nitrogen-Vacancy Centers in Diamond Optical Magnetometry

The lower critical magnetic eld, H c1 , of superconductors is measured by using ensembles of NV-centers-in-diamond optical magnetometry. The technique is minimally invasive, and has sub- gauss eld sensitivity and submicrometer spatial resolution, which allow for accurate detection of the vector eld at which the vortices start penetrating the sample from the corners. Aided by the revised calculations of the effective demagnetization factors of actual cuboid - shaped samples, H c1 and the London penetration depth, λ, derived from H c1 can be obtained. We apply this method to three well-studied superconductors: optimally doped Ba(Fe 1-x Co x ) 2 As 2 , stoichiometric CaKFe 4 As 4 , and high-Tc cuprate YBa 2 Cu 3 O 7-δ . Our results are well compared with the values of λ obtained using other techniques, thus adding another non-destructive and sensitive method to measure these important parameters of superconductors.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Large critical fields in superconducting Ti 4 ⁢Ir 2⁢ O from spin-orbit coupling

The recently synthesized 𝜂-carbide-type superconductors exhibit large critical fields. A notable example is Ti 4 ⁢Ir2⁢ O, for which the upper critical field strongly violates the Pauli paramagnetic limit, a behavior that is unusual for cubic materials that preserve inversion symmetry. Here, by combining density functional theory (DFT) and analytic modeling, we provide an explanation for this enhanced Pauli limiting field. We show that the nonsymmorphic Fd⁢-3 ⁢m symmetry implies that the electronic states near the X points exhibit strong spin-orbit coupling (SOC), which leads to a vanishing effective 𝑔 factor and enables the enhanced Pauli limiting field. Furthermore, our DFT results reveal a Van Hove singularity peak near the X points, accounting for ∼65% of the total density of states (DOS), occurring near the chemical potential. We propose that the strong SOC and enhanced DOS in the vicinity of the X points provide the origin of the observed enhancement of the critical field. This leads to a prediction that the magnetic field will lead to a strongly momentum-dependent gap suppression. As a result, the gap due to electronic states away from (near to) the X points will be rapidly (slowly) suppressed by fields.

Critical field↗

Study of e + e - → Σ 0 Σ ¯ 0 and Σ + Σ ¯ - by initial state radiation method at Belle

The processes e + ⁢e - →Σ 0 ⁢$\overline{Σ}$ 0 and e + ⁢e - →Σ + ⁢$\overline{Σ}$ - are studied using initial-state-radiation events in a sample of 980 fb -1 collected with the Belle detector at the KEKB asymmetric-energy e + ⁢e - collider. The cross sections from the mass threshold to 3 GeV/c 2 and the effective form factors of Σ 0 and Σ + are measured. In the charmonium region, we observe the decays J/ψ →Σ 0 ⁢$\overline{Σ}$ 0 and J/ψ →Σ + ⁢$\overline{Σ}$ - and determine the respective branching fractions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Breakdown of collinear factorization in the exclusive photoproduction of a π 0 γ pair with large invariant mass

We study the exclusive photoproduction of a π 0 γ pair with large invariant mass M γ π 2 , which is sensitive to the exchange of either two quarks or two gluons in the t channel. In this paper, we show that the process involving two-gluon exchanges does factorize in the Bjorken limit at the leading twist. This can be explicitly demonstrated by the fact that there exist diagrams, which contribute at the leading twist, for which are , due to the pinching of the contour integration of the plus and minus component of the Glauber gluon momentum. For the same reason, π 0 -nucleon scattering to two photons also suffers from the same issue. On the other hand, we stress that there are no issues with respect to collinear factorization for the quark channels. By considering an analysis of all potential reduced diagrams of leading pinch-singular surfaces, we argue that the quark channel is safe from Glauber pinches, and therefore, a collinear factorization in that case follows through without any problems. This means that processes where gluon exchanges are forbidden, such as the exclusive photoproduction of π ± γ and ρ 0 , ± γ , are unaffected by the factorization breaking effects we point out in this paper. Published by the American Physical Society 2025

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Crystallization of Carbon-Oxygen Mixtures in White Dwarf Stars

We determine the phase diagram for dense carbon-oxygen mixtures in white dwarf (WD) star interiors using molecular dynamics simulations involving liquid and solid phases. Our phase diagram agrees well with predictions from Ogata et al. and from Medin and Cumming and gives lower melting temperatures than Segretain et al. Observations of WD crystallization in the globular cluster NGC 6397 by Winget et al. suggest that the melting temperature of WD cores is close to that for pure carbon. If this is true, our phase diagram implies that the central oxygen abundance in these stars is less than about 60%. This constraint, along with assumptions about convection in stellar evolution models, limits the effective S factor for the {sup 12}C({alpha},{gamma}){sup 16}O reaction to S{sub 300{<=}}170 keV b.

79 ASTRONOMY AND ASTROPHYSICS↗

Setting Priorities for Photovoltaic Reliability Research Using Criticality Analysis

A forward-looking research opportunity number (RON) is defined for photovoltaic reliability researchers. The RON enables researchers to prioritize their efforts toward the highest impact. For a given degradation mode, the RON is based on three factors: the effect on levelized cost of electricity, the susceptibility of future module products, and the maturity of accelerated tests that can detect and quantify the mode. Reporting bias is avoided because the RON does not rely on polls. The RON is derived for three example cases: light and elevated temperature degradation, backsheet cracking, and antireflective coating abrasion. Finally, these examples demonstrate that targeted research has reduced the risk for these modes over the last several years.

14 SOLAR ENERGY↗

Assessing the effect of elevated carbon dioxide on soil carbon: a comparison of four meta-analyses.

Soil is the largest reservoir of organic carbon (C) in the terrestrial biosphere and soil C has a relatively long mean residence time. Rising atmospheric carbon dioxide (CO{sub 2}) concentrations generally increase plant growth and C input to soil, suggesting that soil might help mitigate atmospheric CO{sub 2} rise and global warming. But to what extent mitigation will occur is unclear. The large size of the soil C pool not only makes it a potential buffer against rising atmospheric CO{sub 2}, but also makes it difficult to measure changes amid the existing background. Meta-analysis is one tool that can overcome the limited power of single studies. Four recent meta-analyses addressed this issue but reached somewhat different conclusions about the effect of elevated CO{sub 2} on soil C accumulation, especially regarding the role of nitrogen (N) inputs. Here, we assess the extent of differences between these conclusions and propose a new analysis of the data. The four meta-analyses included different studies, derived different effect size estimates from common studies, used different weighting functions and metrics of effect size, and used different approaches to address nonindependence of effect sizes. Although all factors influenced the mean effect size estimates and subsequent inferences, the approach to independence had the largest influence. We recommend that meta-analysts critically assess and report choices about effect size metrics and weighting functions, and criteria for study selection and independence. Such decisions need to be justified carefully because they affect the basis for inference. Our new analysis, with a combined data set, confirms that the effect of elevated CO{sub 2} on net soil C accumulation increases with the addition of N fertilizers. Although the effect at low N inputs was not significant, statistical power to detect biogeochemically important effect sizes at low N is limited, even with meta-analysis, suggesting the continued need for long-term experiments.

54 ENVIRONMENTAL SCIENCES↗

The effect of small field output factor measurements on IMRT dosimetry

Purpose: To evaluate how changes in the measured small field output factors affect the doses in intensity-modulated treatment planning. Methods: IMRT plans were created using Philips Pinnacle treatment planning system. The plans were optimized to treat a cylindrical target 2 cm in diameter and 2 cm in length. Output factors for 2 Multiplication-Sign 2 and 3 Multiplication-Sign 3 cm{sup 2} field sizes were changed by {+-}5%, {+-}10%, and {+-}20% increments from the baseline measurements and entered into the planning system. The treatment units were recommissioned in the treatment planning system after each modification of the output factors and treatment plans were reoptimized. All plans were delivered to a solid water phantom and dose measurements were made using an ionization chamber. The percentage differences between measured and computed doses were calculated. An Elekta Synergy and a Varian 2300CD linear accelerator were separately evaluated. Results: For the Elekta unit, decreasing the output factors resulted in higher measured than computed doses by 0.8% for -5%, 3.6% for -10%, and 8.7% for -20% steps. Increasing the output factors resulted in lower doses by 2.9% for +5%, 5.4% for +10%, and 8.3% for +20% steps. For the Varian unit no changes were observed for either increased or decreased output factors. Conclusions: The measurement accuracy of small field output factors are of importance especially when the treatment plan consists of small segments as in IMRT. The method proposed here could be used to verify the accuracy of the measured small field output factors for certain linear accelerators as well as to test the beam model. The Pinnacle treatment planning system model uses output factors as a function of jaw setting. Consequently, plans using the Elekta unit, which conforms the jaws to the segments, are sensitive to small field measurement accuracy. On the other hand, for the Varian unit, jaws are fixed and segments are modeled as blocked fields hence, the impact of small field output factors on IMRT monitor unit calculation is not evaluable by this method.

61 RADIATION PROTECTION AND DOSIMETRY↗

SU-E-T-478: Sliding Window Multi-Criteria IMRT Optimization

Purpose: To demonstrate a method for what-you-see-is-what-you-get multi-criteria Pareto surface navigation for step and shoot IMRT treatment planning. Methods: We show mathematically how multiple sliding window treatment plans can be averaged to yield a single plan whose dose distribution is the dosimetric average of the averaged plans. This is incorporated into the Pareto surface navigation based approach to treatment planning in such a way that as the user navigates the surface, the plans he/she is viewing are ready to be delivered (i.e. there is no extra ‘segment the plans’ step that often leads to unacceptable plan degradation in step and shoot Pareto surface navigation). We also describe how the technique can be applied to VMAT. Briefly, sliding window VMAT plans are created such that MLC leaves paint out fluence maps every 15 degrees or so. These fluence map leaf trajectories are averaged in the same way the static beam IMRT ones are. Results: We show mathematically that fluence maps are exactly averaged using our leaf sweep averaging algorithm. Leaf transmission and output factor corrections effects, which are ignored in this work, can lead to small errors in terms of the dose distributions not being exactly averaged even though the fluence maps are. However, our demonstrations show that the dose distributions are almost exactly averaged as well. We demonstrate the technique both for IMRT and VMAT. Conclusions: By turning to sliding window delivery, we show that the problem of losing plan fidelity during the conversion of an idealized fluence map plan into a deliverable plan is remedied. This will allow for multicriteria optimization that avoids the pitfall that the planning has to be redone after the conversion into MLC segments due to plan quality decline. David Craft partially funded by RaySearch Laboratories.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

SU-E-T-13: A Comparative Dosimetric Study On Radio-Dynamic Therapy for Pelvic Cancer Treatment: Strategies for Bone Marrow Dose and Volume Reduction

Purpose: Radio-dynamic therapy (RDT) is a potentially effective modality for local and systemic cancer treatment. Using RDT, the administration of a radio-sensitizer enhances the biological effect of high-energy photons. Although the sensitizer uptake ratio of tumor to normal tissue is normally high, one cannot simply neglect its effect on critical structures. In this study, we aim to explore planning strategies to improve bone marrow sparing without compromising the plan quality for RDT treatment of pelvic cancers. Methods: Ten cervical and ten prostate cancer patients who previously received radiotherapy at our institution were selected for this study. For each patient, nine plans were created using the Varian Eclipse treatmentplanning-system (TPS) with 3D-CRT, IMRT, and VMAT delivery techniques containing various gantry angle combinations and optimization parameters (dose constraints to the bone marrow). To evaluate the plans for bone marrow sparing, the dose-volume parameters V5, V10, V15, V20, V30, and V40 for bone marrow were examined. Effective doseenhancement factors for the sensitizer were used to weigh the dose-volume histograms for various tissues from individual fractions. Results: The planning strategies had different impacts on bone marrow sparing for the cervical and prostate cases. For the cervical cases, provided the bone marrow constraints were properly set during optimization, the dose to bone marrow sparing was found to be comparable between different IMRT and VMAT plans regardless of the gantry angle selection. For the prostate cases, however, careful selection of gantry angles could dramatically improve the bone marrow sparing, although the dose distribution in bone marrow was clinically acceptable for all prostate plans that we created. Conclusion: For intensity-modulated RDT planning for cervical cancer, planners should set bone marrow constraints properly to avoid any adverse damage, while for prostate cancer one can carefully select gantry angles to improve bone marrow sparing when necessary.

60 APPLIED LIFE SCIENCES↗

TH-AB-201-06: Examining the Influence of Humidity On Reference Ion Chamber Performance

Purpose: International dosimetry protocols require measurements made with a vented ionization chamber to be corrected for the influence of air density by using the standard temperature-pressure correction factor. The effect of humidity, on the other hand, is generally ignored with the provision that the relative humidity is between certain limits (15% to 80%). However, there is little experimental data in the published literature as to the true effect of humidity on modern reference-class ion chambers. This investigation used two different radiation beams – a Co-60 irradiator and a Sr-90 check source – to examine the effect of humidity on several versions of the standard Farmer-type ion chamber. Methods: An environmental cabinet controlled the humidity. For the Co-60 beam, the irradiation was external, whereas for the Sr-90 measurements, the source itself was placed within the cabinet. Extensive measurements were carried out to ensure that the experimental setup provided reproducible readings. Four chamber types were investigated: IBA FC65-G (×2), IBA FC65-P, PTW30013 & Exradin A19. The different wall materials provided potentially different mechanical responses (i.e., in terms of expansion/contraction) to the water content in the air. The relative humidity was varied between 8 % and 97 % and measurements were made with increasing and decreasing humidity to investigate possible hysteresis effects. Results: Measurements in Co-60 were consistent with the published data obtained with primary standard cavity chambers in ICRU Report 31. Ionization currents with Sr-90 showed no dependence with the relative humidity, within the measurement uncertainties. Very good repeatability of the ionization current was obtained over successive wet/dry cycles, no hysteresis was observed, and there was no dependence on chamber type. Conclusion: This null result is very encouraging as it indicates that humidity has no significant effect on these particular types of ionization chambers, consistent with recommendations in current megavoltage dosimetry protocols.

60 APPLIED LIFE SCIENCES↗

Technical Note: Introduction of variance component analysis to setup error analysis in radiotherapy

Purpose: The purpose of this technical note is to introduce variance component analysis to the estimation of systematic and random components in setup error of radiotherapy. Methods: Balanced data according to the one-factor random effect model were assumed. Results: Analysis-of-variance (ANOVA)-based computation was applied to estimate the values and their confidence intervals (CIs) for systematic and random errors and the population mean of setup errors. The conventional method overestimates systematic error, especially in hypofractionated settings. The CI for systematic error becomes much wider than that for random error. The ANOVA-based estimation can be extended to a multifactor model considering multiple causes of setup errors (e.g., interpatient, interfraction, and intrafraction). Conclusions: Variance component analysis may lead to novel applications to setup error analysis in radiotherapy.

60 APPLIED LIFE SCIENCES↗

The Monte Carlo estimation of an effect of uncertainties in initial data on solving the transport equation by means of the MCU code

A new version of the tally module of the MCU software package is developed in which the approach for taking directly into account the uncertainty in initial data is implemented that is recommended by the international standard on estimating the uncertainty in results of measuring (ISO 13005). The new module makes it possible to evaluate the effect of uncertainty in initial data (caused by technological tolerances in fabrication of structural members of the core) on neutronic characteristics of the reactor. The developed software is adapted to parallel computing with the use of multiprocessor computers, which significantly reduces the computation time: the parallelization coefficient is almost equal to 1. Testing is performed by examples of solving the problem on criticality for the Godiva benchmark experiment and also for the infinite lattice of fuel assemblies of the VVER-440, VVER-1000, and VVER-1200. The results of calculations of the uncertainty in neutronic characteristics (effective multiplication factor, fission reaction rate), which is caused by uncertainties in initial data due to technological tolerances, are compared (in the first case) to the published results obtained using the precision MCNP5 code and (in the second case) to those obtained by means of the RADAR engineering program. A good agreement of results is achieved for all cases.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Criticality calculation of non-ordinary systems

The specific features of calculation of the effective multiplication factor using the Monte Carlo method for weakly coupled and non-asymptotic multiplying systems are discussed. Particular examples are considered and practical recommendations on detection and Monte Carlo calculation of systems typical in numerical substantiation of nuclear safety for VVER fuel management problems are given. In particular, the problems of the choice of parameters for the batch mode and the method for normalization of the neutron batch, as well as finding and interpretation of the eigenvalue spectrum for the integral fission matrix, are discussed.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Spin-orbit interaction of charge carriers with impurities in aligned Ge{sub 0.99}Me{sub 0.01} (Me = Mn, Cr, Co, Fe) nanowires

Aligned Ge{sub 0.99}Me{sub 0.01} (Me = Mn, Cr, Co, Fe) nanowires have been investigated by electron spin resonance (ESR). Resonance lines corresponding to a magnetically ordered subsystem of localized spins (clusters of Ge alloys with transition metals) and an asymmetric Dysonian line, corresponding to the ESR of charge carriers in Ge, are identified in the ESR spectra. A systematic decrease in the effective g factor of the asymmetric Dysonian line with enhancement of spin-orbit interaction is found in the series of transition-metal ions Mn{sup 2+}, Cr{sup 2+}, Fe{sup 3+}, and Co{sup 2+}, which were used to dope Ge nanowires.

39↗