Search NASA⌕ Search

SEARCH · Search NASA

Results for “Enhanced Sampling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29

Enhanced ferromagnetic properties and high temperature dielectric anomalies in Bi{sub 0.9}Ca{sub 0.05}Sm{sub 0.05}FeO{sub 3} prepared by hydrothermal method

Graphical abstract: Temperature variation of dielectric constant of Bi{sub 0.9}Ca{sub 0.05}Sm{sub 0.05}FeO{sub 3} at various frequencies as a function of temperature indicating anomalies at 420 and 540 K. - Highlights: • Substitution of Sm ions for Bi enhances the saturation magnetization of BiFeO{sub 3}. • XPS studies indicate the creation of oxygen vacancies upon Ca substitution. • Dielectric measurements show dielectric anomalies at high temperatures. • Raman spectra at high temperatures confirm the dielectric anomaly temperatures. - Abstract: Enhanced ferromagnetic properties and high temperature dielectric anomalies in the temperature range of 300–873 K in Bi{sub 0.9}Ca{sub 0.05}Sm{sub 0.05}FeO{sub 3} (BCSFO) prepared by hydrothermal method are reported. BiFeO{sub 3} is seen to crystallize in rhombohedrally distorted perovskite structure without any impurity phase. Substitution of small amount of Ca and Sm (Bi{sub 0.9}Ca{sub 0.05}Sm{sub 0.05}FeO{sub 3}) leads to increase in the lattice constant values and formation of small amount of secondary phase. Magnetization curve of pure BFO indicates very weak ferromagnetism combined with antiferromagnetic nature of the samples. Whereas, BCSFO sample shows very clear and enhanced ferromagnetic nature. Saturation magnetization and Neel’s temperature values are found to be 4.36 emu/g and 664 K, respectively. X-ray photoelectron spectroscopy indicates the creation of oxygen vacancies upon Ca substitution in Bi site. Dielectric anomalies at 420 and 540 K were observed for Bi{sub 0.9}Ca{sub 0.05}Sm{sub 0.05}FeO{sub 3} from the temperature variation of dielectric constant and specific heat capacity measurements. Observation of dielectric anomalies in pure BiFeO{sub 3} sample reveals that the origin of dielectric peaks is purely from the primary phase. Raman spectroscopy study indicates a clear shift and broadening of A modes (between 100 and 200 cm{sup −1}) at the dielectric anomaly temperatures supporting the observed dielectric anomalies.

36 MATERIALS SCIENCE↗

Dual microscopy to explore enhanced atmospheric ice nucleation on multi-component aerosols

Using an optical microscopy setup adapted to in-situ studies of ice formation at ambient pressure, we examined a specific multicomponent mineral, microcline, with the ultimate aim of gaining a more realistic understanding of ice nucleation in Earth’s atmosphere. We focused on a perthitic feldspar, microcline, to test the hypothesis that co-existence in some feldspars of K-rich and Na-rich phases are contributing to enhanced ice nucleation. On a sample deliberately chosen to contain lamella, a typical perthitic microstructure, and flat surface regions next to each other, we performed a series of ice formation experiments. We found microcline to promote ice formation, causing a large number of ice nucleation events at around - 27°C. The number of ice nuclei decreased from experimental run to experimental run, indicating surface aging upon repeated exposure to humidity. An analysis of 10 experimental runs of identical conditions did not reveal an obvious enhancement of ice formation at the lamellar microstructure. Instead, we find efficient nucleation at various surface sites that produce orientationally aligned ice crystallites with asymmetric shape. Based on this observation we propose that surface steps running along select directions produce microfacets of an orientation that is favorable to enhanced ice nucleation, similar to previously reported for K-rich feldspars.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A detailed investigation on the impact of post-growth annealing on the materials and device characteristics of 35-layer In{sub 0.50}Ga{sub 0.50}As/GaAs quantum dot infrared photodetector with quaternary In{sub 0.21}Al{sub 0.21}Ga{sub 0.58}As capping

Highlights: ► We investigated the effect of ex situ annealing on InGaAs/GaAs QDIP with InAlGaAs layer. ► As-grown defect was removed by using post-growth annealing treatment. ► Increase in the compressive strain due to annealing is calculated from XRD curve. ► Three-fold enhancement in responsivity is observed in the QDIPs annealed at 650 °C. ► Two-fold enhancement in D* is observed sample annealed at 650 °C compared to as grown. -- Abstract: The effect of post-growth rapid thermal annealing on 35-layer In{sub 0.50}Ga{sub 0.50}As/GaAs quantum dot infrared photodetector (QDIP) with quaternary In{sub 0.21}Al{sub 0.21}Ga{sub 0.58}As capping has been investigated. Transmission electron microscopy showed some as-grown defects were removed by post growth annealing treatment. An increase in the compressive strain in the heterostructure due to annealing was identified from X-ray diffraction curve. A two-color photoresponse in the long-wave region (8.5 and 10.2 μm) was observed in both as-grown device and those annealed at 650 °C temperature. A three-fold enhancement in peak responsivity was observed in the QDIPs annealed at 650 °C (1.19 A/W) compared to that in the as-grown (0.34 A/W). Detectivity also increased by two fold from as-grown to 650 °C annealed device. The changes are attributed to the removal of as-grown defects and dislocations during epitaxial growth. These removals changed the confinement potential profile, which resulted in an improvement in the detectivity and responsivity of the annealed sample.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Biodegradation in Soil of PLA/PBAT Blends Compatibilized with Chain Extender

This paper presents a study of biodegradation, in soil, of samples of poly(butylene adipate-co-terephthalate)(PBAT), poly(lactic acid) (PLA) and blends of these materials prepared in torque rheometer with the addition of a chain extender. Film samples of these materials were buried in soil under controlled laboratory conditions. The degraded samples were regularly taken from soil and analyzed by visual inspection, size exclusion chromatography, differential scanning calorimetry and infrared spectroscopy. Respirometry biodegradation tests were conducted to assess samples mineralization degree. Blends showed higher degree of crystallinity compared to pure polymers. Crystallinity degree enhanced during the biodegradation process in all samples, being able to causing the samples to degrade slowly. The study showed the great complexity of the biodegradation process of PLA and PBAT blends when compatibilized with a chain extender. The biodegradation rate showed different results depending on the characteristic applied to evaluate it: visual, molecular weight or mineralization. The chain extender had strong influence in PBAT and blends degradation, slowing the process as observed by the variation of molecular weight and carbonyl index. Blends showed an intermediate behavior compared to the original polymers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Sustainable network design for multi-purpose pellet processing depots under biomass supply uncertainty

This work develops a two-stage stochastic mixed-integer programming model to manage multi- purpose pellet processing depots under feedstock supply uncertainty. The proposed optimization model would help to minimize cost and to mitigate emissions from the supply chain network. We consider three alternative Biomass Processing and Densi cation Depot (BPDD) technologies; namely, conventional pellet processing, high moisture pellet processing, and ammonia ber expansion. These three technologies pre-process/pre-treat and densify different types of biomass into more highly densi ed intermediate products for different markets in order to improve movability and overall supply network performance in terms of costs and emissions. A hybrid decomposition algorithm was developed that combines sample average approximation with an enhanced Progressive Hedging (PH) algorithm to solve this challenging NP -hard problem. Some heuristics such as Rolling Horizon (RH) heuristic, variable xing technique were later applied to further enhance the PH algorithm. Mississippi and Alabama were selected as a testing ground and ArcGIS was employed to visualize and validate the modeling results. The results of the analysis reveal promising insights that could lead to recommendations to help decision makers achieve a more cost-effective environmentally-friendly supply chain network.

09 BIOMASS FUELS↗

Förster Resonance Energy Transfer and Enhanced Emission in Cs 4 PbBr 6 Nanocrystals Encapsulated in Silicon Nano-Sheets for Perovskite Light Emitting Diode Applications

Encapsulating Cs 4 PbBr 6 quantum dots in silicon nano-sheets not only stabilizes the halide perovskite, but also takes advantage of the nano-sheet for a compatible integration with the traditional silicon semiconductor. Here, we report the preparation of un-passivated Cs 4 PbBr 6 ellipsoidal nanocrystals and pseudo-spherical quantum dots in silicon nano-sheets and their enhanced photoluminescence (PL). For a sample with low concentrations of quantum dots in silicon nano-sheets, the emission from Cs 4 PbBr 6 pseudo-spherical quantum dots is quenched and is dominated with Pb 2+ ion/silicene emission, which is very stable during the whole measurement period. For a high concentration of Cs 4 PbBr 6 ellipsoidal nanocrystals in silicon nano-sheets, we have observed Förster resonance energy transfer with up to 87% efficiency through the oscillation of two PL peaks when UV excitation switches between on and off, using recorded video and PL lifetime measurements. In an area of a non-uniform sample containing both ellipsoidal nanocrystals and pseudo-spherical quantum dots, where Pb 2+ ion/silicene emissions, broadband emissions from quantum dots, and bandgap edge emissions (515 nm) appear, the 515 nm peak intensity increases five times over 30 min of UV excitation, probably due to a photon recycling effect. This irradiated sample has been stable for one year of ambient storage. Cs 4 PbBr 6 quantum dots encapsulated in silicon nano-sheets can lead to applications of halide perovskite light emitting diodes (PeLEDs) and integration with traditional semiconductor materials.

36 MATERIALS SCIENCE↗

Structural and magnetic properties of La{sub 1−x}Ce{sub x}Fe{sub 1−x}Cr{sub x}O{sub 3} orthoferrite prepared by co-precipitation method

Graphical abstract: TEM micrographs of La{sub 1−x}Ce{sub x}Fe{sub 1−x}Cr{sub x}O{sub 3} for x = 0.0. - Highlights: • The composition of La{sub 1−x}Ce{sub x}Fe{sub 1−x} Cr{sub x}O{sub 3} was prepared by co-precipitation method. • X-ray diffraction showed orthorhombic structure with space group Pnma. • With increasing Ce and Cr content, a decrease of the unit cell volume. • Enhancement in the coercivity (H{sub c}) with increasing Ce and Cr content. • Reduction of M{sub s} and M{sub r} up to x = 0.15 and increases with further increases of x. - Abstract: Nanocrystalline orthoferrites with the composition of La{sub 1−x}Ce{sub x}Fe{sub 1−x} Cr{sub x}O{sub 3} where (x = 0, 0.1, 0.15 and 0.2) were prepared by co-precipitation method. The structural and magnetic properties of the La{sub 1−x}Ce{sub x}Fe{sub 1−x}Cr{sub x}O{sub 3} system have been investigated. X-ray diffraction showed the formation of orthorhombic structure with space group Pnma for different compositions. With increasing Ce and Cr content, lattice parameters a and c were found to decrease while b increases, resulting in a decrease of the unit cell volume. The crystallite size was calculated from XRD data and compared with that obtained from TEM micrographs. Vibrating sample magnetometer measurements reveal an enhancement in the coercivity (H{sub c}) with increasing Ce and Cr content and reduction of saturation magnetization (M{sub s}) and remnant magnetization (M{sub r}) up to x = 0.15 and increases with further increases of x. The magnetic susceptibility measurements vs. temperature showed canted-antiferromagnetic (AFM) in which the Neel temperature is increasing with Ce and Cr content.

36 MATERIALS SCIENCE↗

SEGUE 3: AN OLD, EXTREMELY LOW LUMINOSITY STAR CLUSTER IN THE MILKY WAY's HALO

We investigate the kinematic and photometric properties of the Segue 3 Milky Way companion using Keck/DEIMOS spectroscopy and Magellan/IMACS g- and r-band imaging. Using maximum likelihood methods to analyze the photometry, we study the structure and stellar population of Segue 3. We find that the half-light radius of Segue 3 is 26'' {+-} 5'' (2.1 {+-} 0.4 pc, for a distance of 17 kpc) and the absolute magnitude is a mere M{sub V} = 0.0 {+-} 0.8 mag, making Segue 3 the least luminous old stellar system known. We find Segue 3 to be consistent with a single stellar population, with an age of 12.0{sup +1.5}{sub -0.4} Gyr and an [Fe/H] of -1.7{sup +0.07}{sub -0.27}. Line-of-sight velocities from the spectra are combined with the photometry to determine a sample of 32 stars which are likely associated with Segue 3. The member stars within three half-light radii have a velocity dispersion of 1.2 {+-} 2.6 km s{sup -1}. Photometry of the members indicates that the stellar population has a spread in [Fe/H] of {approx}< 0.3 dex. These facts, together with the small physical size of Segue 3, imply the object is likely an old, faint stellar cluster which contains no significant dark matter. We find tentative evidence for stellar mass loss in Segue 3 through the 11 candidate member stars outside of three half-light radii, as expected from dynamical arguments. Interpretation of the data outside of three half-light radii is complicated by the object's spatial coincidence with a previously known halo substructure, which may enhance contamination of our member sample.

79 ASTRONOMY AND ASTROPHYSICS↗

Structural and optical characterization of CdS/TiO{sub 2} nanocomposite

Nanocomposites are advantageous because they can compensate for the disadvantages of the individual component, and induce a synergistic effect, such as an efficient charge separation and improvement of photostability. Present study reveals the advantage of nanocomposite CdS/TiO{sub 2} over TiO{sub 2} which have been prepared by a simple Co-precipitation method. The particle size of CdS/TiO{sub 2} estimated from X-ray diffraction pattern comes out to be {approx} 5.8 nm which is in good agreement with that of transmission electron microscopy. High resolution transmission electron microscopy showed a reduction in defect levels in the as prepared CdS/TiO{sub 2} nanocomposite in comparison to TiO{sub 2}. In our method titanium monoxide (TiO) phase has appeared at room temperature against the earlier reports. Williamson-Hall plot analysis revealed the presence of tensile strain in both the CdS/TiO{sub 2} and TiO{sub 2} samples. New Raman bands for rutile TiO{sub 2} have also been observed which have not been previously reported. UV-visible study reveals an enhanced absorption capability of the composite sample ({approx} 383.85 nm) in comparison to pure TiO{sub 2} ({approx} 331.37 and 324.40 nm).The optical and electrical results have shown the activation of the excited TiO{sub 2} in the presence of CdS. - Graphical Abstract: Nanocomposites are advantageous because they can compensate for the disadvantages of the individual component and induce a synergistic effect. Present study reveals the advantage of nanocomposite CdS/TiO{sub 2} over TiO{sub 2} prepared via simple Co-precipitation method. The optical and electrical results have shown the activation of the excited TiO{sub 2} in the presence of CdS. Research Highlights: {yields} Advantage of CdS/TiO{sub 2} over TiO{sub 2} prepared via Co-precipitation method. {yields} Appearance of positive slope has ensured the presence of tensile strain. {yields} New Raman bands for rutile TiO{sub 2} which has not been previously reported. {yields} Activation of the excited TiO{sub 2} in the presence of CdS rather than deactivation.

36 MATERIALS SCIENCE↗

Quantitative enhancement of fatigue crack monitoring by imaging surface acoustic wave reflection in a space-cycle-load domain

The surface wave acoustic method is applied to the in-situ monitoring of fatigue crack initiation and evolution on tension specimens. A small low-frequency periodic loading is also applied, resulting in a nonlinear modulation of reflected pulses. The acoustic wave reflections are collected for: each experimental cycle; a range of applied tension and modulation load levels; and a range of spatial propagation positions, and are presented in image form to aid pattern identification. Salient features of the image are then extracted and processed to evaluate the initiation time of the crack and its subsequent size evolution until sample failure. Additionally, a method for enhancing signal to noise ratio in Ti-6242 alloy samples is demonstrated.

36 MATERIALS SCIENCE↗

Using superconducting undulator for enhanced imaging capabilities of MaRIE

MaRIE x-ray free electron laser (FEL) is envisioned to deliver a burst of closely spaced in time pulses for enabling the capability of studying the dynamic processes in a sample. MaRIE capability can be largely enhanced using the superconducting undulator, which has the capability of doubling its period. This technology will allow reaching the photon energy as low as ~200-500 eV. As a result, the MaRIE facility will have a broader photon energy range enabling a larger variety of experiments. The soft x-ray capability is more likely to achieve the 3D imaging of dynamic processes in noncrystal materials than the hard x-ray capability alone.

42 ENGINEERING↗

DETERMINATION OF 237NP AND PU ISOTOPES IN LARGE SOIL SAMPLES BY INDUCTIVELY COUPLED PLASMA MASS SPECTROMETRY

A new method for the determination of {sup 237}Np and Pu isotopes in large soil samples has been developed that provides enhanced uranium removal to facilitate assay by inductively coupled plasma mass spectrometry (ICP-MS). This method allows rapid preconcentration and separation of plutonium and neptunium in large soil samples for the measurement of {sup 237}Np and Pu isotopes by ICP-MS. {sup 238}U can interfere with {sup 239}Pu measurement by ICP-MS as {sup 238}UH{sup +} mass overlap and {sup 237}Np via {sup 238}U peak tailing. The method provides enhanced removal of uranium by separating Pu and Np initially on TEVA Resin, then transferring Pu to DGA resin for additional purification. The decontamination factor for removal of uranium from plutonium for this method is greater than 1 x 10{sup 6}. Alpha spectrometry can also be applied so that the shorter-lived {sup 238}Pu isotope can be measured successfully. {sup 239}Pu, {sup 242}Pu and {sup 237}Np were measured by ICP-MS, while {sup 236}Pu and {sup 238}Pu were measured by alpha spectrometry.

54 ENVIRONMENTAL SCIENCES↗

Influence of crystalline phase and defects in the ZrO{sub 2} nanoparticles synthesized by thermal plasma route on its photocatalytic properties

Graphical abstract: Thermal plasma synthesized nanophase zirconia showing the blue shift in the band gap of monoclinic phase as found from the photoabsorption spectroscopy was found to be the dominant parameter for the enhancement in its photocatalytic activity. The existence of different defect states and their concentration in as synthesized samples also inferred from the photoabsorption measurements were also found to be responsible for the enhanced photocatalytic activity of the samples. Highlights: ► Phase controlled structural formation of nanophase ZrO{sub 2} by thermal plasma route. ► Enhanced photocatalytic degradation rate of methylene blue dye. ► The blue shift in the band gap of monoclinic phase of nanocrystalline ZrO{sub 2}. ► Existence of different defect states in the as synthesized nano phase ZrO{sub 2}. ► Several competing processes which controls the photocatalytic degradation rate. -- Abstract: The photocatalytic activity of pure ZrO{sub 2} samples, prepared by a thermal plasma route, and characterized by X-ray diffraction technique was tested for the degradation of methylene blue, which is known to be a hazardous dye. Although, all these samples synthesized at different operating pressures of the thermal plasma reactor showed the photocatalytic activity; the sample synthesized at 1.33 bar of operating pressure showed the highest photocatalytic activity. The blue shift in the band gap of monoclinic phase, as observed from the photo-absorption spectroscopy, may be attributed to the enhanced photocatalytic activity. The existence of different defect states and their concentration as, inferred from the photo-absorption measurements were also found to be responsible for the enhanced photocatalytic activity of the as synthesized samples.

36 MATERIALS SCIENCE↗

Maximizing Calendering Effects Through the Mechanical Pulverization of Co-Free Nickel-Rich Cathodes in Lithium-Ion Cells

Calendering is a technique used to maximize the volumetric energy density of battery electrodes. However, higher amounts of calendering result in increased tortuosity and particle cracking. We propose a novel packing structure of electrode particles to maximize calendering benefits while minimizing particle fracture. Cobalt-free layered oxide cathode LiNi0.92Mn0.04Al0.04O2 (NMA) particles are pulverized through ball-milling and coated with lithium phosphate. Pulverized and pristine NMA are fabricated into “bimodal” electrodes, whereas “unimodal” electrodes consist of only pristine NMA. Each electrode type was made into 30% porosity, 40% porosity, and uncalendered coin cell samples. X-ray diffraction suggests that the unimodal samples suffer from more particle fracture than the bimodal samples when calendered to the same porosity of 30%. Electrochemical impedance spectroscopy suggests that the bimodal electrodes exhibit lower surface film resistance. This is supported by enhanced capacity retention for the bimodal samples after 100 cycles.

25 ENERGY STORAGE↗

Automated Cache Performance Analysis And Optimization

While there is no lack of performance counter tools for coarse-grained measurement of cache activity, there is a critical lack of tools for relating data layout to cache behavior to application performance. Generally, any nontrivial optimizations are either not done at all, or are done ”by hand” requiring significant time and expertise. To the best of our knowledge no tool available to users measures the latency of memory reference instructions for particular addresses and makes this information available to users in an easy-to-use and intuitive way. In this project, we worked to enable the Open|SpeedShop performance analysis tool to gather memory reference latency information for specific instructions and memory addresses, and to gather and display this information in an easy-to-use and intuitive way to aid performance analysts in identifying problematic data structures in their codes. This tool was primarily designed for use in the supercomputer domain as well as grid, cluster, cloud-based parallel e-commerce, and engineering systems and middleware. Ultimately, we envision a tool to automate optimization of application cache layout and utilization in the Open|SpeedShop performance analysis tool. To commercialize this software, we worked to develop core capabilities for gathering enhanced memory usage performance data from applications and create and apply novel methods for automatic data structure layout optimizations, tailoring the overall approach to support existing supercomputer and cluster programming models and constraints. In this Phase I project, we focused on infrastructure necessary to gather performance data and present it in an intuitive way to users. With the advent of enhanced Precise Event-Based Sampling (PEBS) counters on recent Intel processor architectures and equivalent technology on AMD processors, we are now in a position to access memory reference information for particular addresses. Prior to the introduction of PEBS counters, cache behavior could only be measured reliably in the aggregate across tens or hundreds of thousands of instructions. With the newest iteration of PEBS technology, cache events can be tied to a tuple of instruction pointer, target address (for both loads and stores), memory hierarchy, and observed latency. With this information we can now begin asking questions regarding the efficiency of not only regions of code, but how these regions interact with particular data structures and how these interactions evolve over time. In the short term, this information will be vital for performance analysts understanding and optimizing the behavior of their codes for the memory hierarchy. In the future, we can begin to ask how data layouts might be changed to improve performance and, for a particular application, what the theoretical optimal performance might be. The overall benefit to be produced by this effort was a commercial quality easy-to- use and scalable performance tool that will allow both beginner and experienced parallel programmers to automatically tune their applications for optimal cache usage. Effective use of such a tool can literally save weeks of performance tuning effort. Easy to use. With the proposed innovations, finding and fixing memory performance issues would be more automated and hide most to all of the performance engineer expertise ”under the hood” of the Open|SpeedShop performance tool. One of the biggest public benefits from the proposed innovations is that it makes performance analysis more usable to a larger group of application developers. Intuitive reporting of results. The Open|SpeedShop performance analysis tool has a rich set of intuitive, yet detailed reports for presenting performance results to application developers. Our goal was to leverage this existing technology to present the results from our memory performance addition to Open|SpeedShop. Suitable for experts as well as novices. Application performance is getting more difficult to measure as the hardware platforms they run on become more complicated. This makes life difficult for the application developer, in that they need to know more about the hardware platform, including the memory system hierarchy, in order to understand the performance of their application. Some application developers are comfortable in that sceario, while others want to do their scientific research and not have to understand all the nuances in the hardware platform they are running their application on. Our proposed innovations were aimed to support both experts and novice performance analysts. Useful in many markets. The enhancement to Open|SpeedShop would appeal to a broader market space, as it will be useful in scientific, commercial, and cloud computing environments. Our goal was to use technology developed initially at the and Lawrence Livermore National Laboratory combined with the development and commercial software experience of the Argo Navis Technologies, LLC (ANT) to form a powerful combination to delivery these objectives.

97 MATHEMATICS AND COMPUTING↗

Complicated Magnetic Phases and Presence of Exchange Bias in Off-Stoichiometric Mn{sub 50}Ni{sub 25 + x}In{sub 25−x} Heusler Alloys

The martensitic transformation (MT), magnetic phases, and exchange bias (EB) effect in Mn{sub 50}Ni{sub 25 + x}In{sub 25−x} (x = 14.5∼18) Heusler alloys have been investigated. The MT and magnetic state can be tuned significantly by modifying the Ni/In ratio, while the Curie temperature (T{sub C}) remains almost unchanged. With increase of the Ni/In ratio, the ferromagnetic components in the studied samples decrease continuously, while the antiferromagnetic components increase and it therefore enhances the exchange interaction as well. All of the samples exhibit negative horizontally shifted loops after field-cooled procedure. In addition, the samples with the compositional range of 15 ≤ x ≤ 16 also present the EB effect in zero field-cooled condition. To evaluate the causes of this scenario, EB field and coercive field as a function of temperature and cooling field have been investigated. The experimental results imply that the spin reconfiguration of superspin glass (SSG) clusters and the competition between antiferromagnetic and ferromagnetic interactions can account for the behavior of EB effect.

36 MATERIALS SCIENCE↗

Crystallization of Amorphous Germanium Films and Multilayer a-Ge/a-Si Structures upon Exposure to Nanosecond Laser Radiation

The processes of the crystallization of amorphous germanium films and multilayer germanium/silicon structures upon exposure to nanosecond (70 ns) ruby laser radiation (λ = 694 nm) are studied. The samples are grown on silicon and glassy substrates by plasma-enhanced chemical vapor deposition. Pulsed laser annealing of the samples is conducted in the range of pulse energy densities E{sub p} from 0.07 to 0.8 J cm{sup –2}. The structure of the films after annealing is determined by analyzing the scanning electron microscopy data and Raman spectra. It is established that, after annealing, the films are completely crystallized and, in this case, contain regions of coarse crystalline grains (>100 nm), whose fraction increases, as E{sub p} is increased, and reaches 40% of the area. From analysis of the position of the Raman peaks, it is conceived that the crystalline grains, whose dimensions exceed 100 nm, either contain structural defects or stretching strains. The correlation length of optical vibrations is determined from the phonon confinement model and found to increase from 5 to 8 nm, as E{sub p} is increased. Pulsed laser annealing of multilayer Ge(10 nm)/Si(5 nm) structures induces partial intermixing of the layers with the formation of Ge–Si alloys.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Cooling rate dependence of structural order in Al{sub 90}Sm{sub 10} metallic glass

The atomic structure of Al{sub 90}Sm{sub 10} metallic glass is studied using molecular dynamics simulations. By performing a long sub-T{sub g} annealing, we developed a glass model closer to the experiments than the models prepared by continuous cooling. Using the cluster alignment method, we found that “3661” cluster is the dominating short-range order in the glass samples. The connection and arrangement of “3661” clusters, which define the medium-range order in the system, are enhanced significantly in the sub-T{sub g} annealed sample as compared with the fast cooled glass samples. Unlike some strong binary glass formers such as Cu{sub 64.5}Zr{sub 35.5}, the clusters representing the short-range order do not form an interconnected interpenetrating network in Al{sub 90}Sm{sub 10,} which has only marginal glass formability.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗