Search NASA⌕ Search

SEARCH · Search NASA

Results for “FELDSPARS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

516 records · Page 29

How Many Vesta-Like Bodies Existed in the Asteroid Belt?

Asteroid 4 Vesta is typically thought to be the parent body of the HED (howardite, eucrite, and diogenite) meteorites due to spectral similarities. The discovery of asteroids far from Vesta with HED-like spectra like (1459) Magnya and HED-like meteorites (e.g., NWA 011) with anomalous oxygen isotopic values compared to typical HEDs is evidence that other Vesta-like bodies formed. We broadly define a Vesta-like body as a differentiated object with a crust composed primarily of low-Ca pyroxene and plagioclase feldspar. We estimate the number of Vesta-like bodies that did form by looking at the astronomical evidence; the oxygen isotopic, chemical, and petrologic evidence; and the iron meteorite evidence. Assuming that fragments of Vesta were scattered from Vesta by giant planet migration, we conservatively estimate that at least two Vesta-like bodies (Vesta and the Magnya parent bodies) existed. From the oxygen isotopic, chemical, and petrologic evidence, we also conservatively estimate that seven Vesta-like bodies formed. Analyses of iron meteorites indicate that there may be as many as 23 Vesta-like bodies (Vesta, 10 magmatic iron groups, South Byron trio, Emsland/Mbosi duo, 10 ungrouped irons). This estimate from iron meteorites is most certainly an overestimation due to the existence of a number of non-HED crustal/mantle fragments that potentially originated from bodies with magmatic iron cores. Using our three estimates as a guide, we predict that there were ~10 Vesta-like bodies (including Vesta) that formed in the early solar system. Only Vesta remains intact with the others being disrupted early in solar system history.

T. H. Burbine↗

Modeling Impacts of Dust Mineralogy on Fast Climate Response

Mineralogical composition drives dust impacts on Earth's climate systems. However, most climate models still use homogeneous dust, without accounting for the temporal and spatial variation in mineralogy. To quantify the radiative impact of resolving dust mineralogy on Earth's climate, we implement and simulate the distribution of dust minerals (i.e., illite, kaolinite, smectite, hematite, calcite, feldspar, quartz, and gypsum) from Claquin et al. (1999) (C1999) and activate their interaction with radiation in the GFDL AM4.0 model. Resolving mineralogy reduces dust absorption compared to the homogeneous dust used in the standard GFDL AM4.0 model that assumes a globally uniform hematite volume content of 2.7 % (HD27). The reduction in dust absorption results in improved agreement with observation-based single-scattering albedo (SSA), radiative fluxes from CERES (the Clouds and the Earth's Radiant Energy System), and land surface temperature from the CRU (Climatic Research Unit) compared to the baseline HD27 model version. It also results in distinct radiative impacts on Earth's climate over North Africa. Over the 19-year (from 2001 to 2019) modeled period during JJA (June–July–August), the reduction in dust absorption in AM4.0 leads to a reduction of over 50 % in net downward radiation across the Sahara and approximately 20 % over the Sahel at the top of the atmosphere (TOA) compared to the baseline HD27 model version. The reduced dust absorption weakens the atmospheric warming effect of dust aerosols and leads to an alteration in land surface temperature, resulting in a decrease of 0.66 K over the Sahara and an increase of 0.7 K over the Sahel. The less warming in the atmosphere suppresses ascent and weakens the monsoon inflow from the Gulf of Guinea. This brings less moisture to the Sahel, which combined with decreased ascent induces a reduction of precipitation. To isolate the effect of reduced absorption compared to resolving spatial and temporal mineralogy, we carry out a simulation where the hematite volume content of homogeneous dust is reduced from 2.7 % to 0.9 % (HD09). The dust absorption (e.g., single-scattering albedo) of HD09 is comparable to that of the mineralogically speciated model on a global mean scale, albeit with a lower spatial variation that arises solely from particle size. Comparison of the two models indicates that the spatial inhomogeneity in dust absorption resulting from resolving mineralogy does not have significant impacts on Earth's radiation and climate, provided there is a similar level of dust absorption on a global mean scale before and after resolving dust mineralogy. However, uncertainties related to emission and distribution of minerals may blur the advantages of resolving minerals to study their impact on radiation, cloud properties, ocean biogeochemistry, air quality, and photochemistry. On the other hand, lumping together clay minerals (i.e., illite, kaolinite, and smectite), but excluding externally mixed hematite and gypsum, appears to provide both computational efficiency and relative accuracy. Nevertheless, for specific research, it may be necessary to fully resolve mineralogy to achieve accuracy.

Soil dust↗

Menzerite-(Y) a New Species {(Y REE)(Ca Fe2plus)2}[(Mg Fe2plus)(Fe3plus Al)](Si3)O12 from a Felsic Granulite Parry Sound Ontario and a New Garnet End-member (Y2Ca)Mg2(SiO4)3

Menzerite-(Y), a new mineral species, forms reddish brown cores, n = 1.844 (20), up to 70 {micro}m across, rimmed successively by euhedral almandine containing up to 2.7 wt% Y{sub 2}O{sub 3} and by K-feldspar in a felsic granulite on Bonnet Island in the interior Parry Sound domain, Grenville Orogenic Province, Canada. It is named after Georg Menzer (1897-1989), the German crystallographer who solved the crystal structure of garnet. Single-crystal X-ray-diffraction results yielded space group Ia3d, a = 11.9947(6) {angstrom}. An electron-microprobe analysis of the grain richest in Y (16.93 wt% Y{sub 2}O{sub 3}) gave the following formula, normalized to eight cations and 12 oxygen atoms: {l_brace}Y{sub 0.83}Gd{sub 0.01}Dy{sub 0.05}Ho{sub 0.02}Er{sub 0.07}Tm{sub 0.01}Yb{sub 0.06}Lu{sub 0.02}Ca{sub 1.37}Fe{sub 0.49}{sup 2+}Mn{sub 0.07}{r_brace} [Mg{sub 0.55}Fe{sub 0.42}{sup 2+}Fe{sub 0.58}{sup 3+}Al{sub 0.35} V{sub 0.01}Sc{sub 0.01}Ti{sub 0.08}](Si{sub 2.82}Al{sub 0.18})O{sub 12}, or {l_brace}(Y,REE)(Ca,Fe{sup 2+}){sub 2}{r_brace}[(Mg,Fe{sup 2+})(Fe{sup 3+},Al)](Si{sub 3})O{sub 12}. Synchrotron micro-XANES data gave Fe{sup 3+}/{Sigma}Fe = 0.56(10) versus 0.39(2) calculated from stoichiometry. The scattering power refined at the octahedral Y site, 17.68 epfu, indicates that a relatively light element contributes to its occupancy. Magnesium, as determined by electron-microprobe analyses, would be a proper candidate. In addition, considering the complex occupancy of this site, the average Y-O bond length of 2.0244(16) {angstrom} is in accord with a partial occupancy by Mg. The dominance of divalent cations with Mg > Fe{sup 2+} and the absence of Si at the octahedral Y site (in square brackets) are the primary criteria for distinguishing menzerite-(Y) from other silicate garnet species; the menzerite-(Y) end-member is {l_brace}Y{sub 2}Ca{r_brace}[Mg{sub 2}](Si{sub 3})O{sub 12}. The contacts of menzerite-(Y) with almandine are generally sharp and, in places, cuspate. It is interpreted to have equilibrated with ferrosilite, augite, quartz, oligoclase, allanite-(Ce), magnetite, ilmenite and fluorapatite, in the absence of almandine, on the prograde path at 7-8.5 kbar and T {approx} 700-800 C, and subsequently dissolved incongruently in an anatectic melt to form almandine, most likely, at P {approx} 8.5-9.5 kbar and T {approx} 800-850 C.

58 GEOSCIENCES↗

Where fast weathering creates thin regolith and slow weathering creates thick regolith

Weathering disaggregates rock into regolith the fractured or granular earthmaterial that sustains life on the continental land surface. Here, we investigate what controls the depth of regolith formed on ridges of two rock compositions with similar initial porosities in Virginia (USA).A priori, we predicted that the regolith on diabasewould be thicker than on granite because the dominant mineral (feldspar) in the diabase weathers faster than its granitic counterpart. However, weathering advanced 20deeper into the granite than the diabase. The 20-thicker regolith is attributed mainly to connected micron-sized pores, microfractures formed around oxidizing biotite at 20m depth, and the lower iron (Fe) content in the felsic rock. Such porosity allows pervasive advection and deep oxidation in the granite. These observations may explainwhy regolithworldwide is thicker on felsic compared tomafic rock under similar conditions. To understand regolith formationwill require better understanding of such deep oxidation reactions and how they impact fluid flow during weathering.

diabese↗

Experimental studies of reactivity and transformations of rocks and minerals in water-bearing supercritical CO2

Geologic storage of carbon dioxide is a promising strategy for reducing CO2 concentrations in the atmosphere. In this process, silicate minerals in the host rock can react to permanently trap CO2 as precipitated carbonates. In addition, expandable clays in caprocks can swell or shrink and impact the integrity of the caprock seal. While the reactivity of minerals in CO2-rich aqueous fluids has been well studied, much less is known about mineral transformations in supercritical CO2 (scCO2) containing dissolved water. This chapter focuses on experimental investigations of mineral reactivity and transformations in variably hydrated scCO2. We summarize research regarding reservoir rocks, including carbonates, sandstone, granite, basalt, and peridotite. We also cover studies on several mineral systems, including phyllosilicate (montmorillonite), olivine (forsterite), serpentine (antigorite), pyroxene (enstatite), and feldspars (albite, anorthite, and microcline). For expandable phyllosilicate clay minerals, it is shown that volume changes are induced by both H2O and CO2 intercalation. For metal silicate minerals, a common observation is the adsorption of ångstroms- to nanometers-thick H2O films, which facilitate mineral dissolution, ion transport, and nucleation of metal carbonate precipitates. Many silicates exhibit a threshold concentration of adsorbed H2O, before which carbonation is limited to possibly amorphous phase precipitation or surface complexation, but beyond which carbonation is continuous and crystalline carbonates can form.

Loring, John S.↗

Effects of Calcite Impurities in Bentonite Buffer Systems on Uranium(VI) Solution Speciation and Sorption Behavior

In many nuclear waste disposal scenarios, bentonite is the proposed buffer material surrounding nuclear waste containers. Its main mineralogical component, Na-montmorillonite clay, is expected to limit radionuclide mobility to slow diffusion processes due to the clay’s low porosity and permeability, and the high sorption affinity of clay surface complexation and cation exchange sites for many radionuclides. Given its mineral structure, montmorillonite provides two types of porosities that can be accessible to radioactive contaminants: macropores between clay particles and interlayer spaces within clay particles, which become dominant at increasing degrees of bentonite compaction. Despite the fact that bentonite naturally contains a variety of mineral impurities (e.g., quartz, feldspars and calcite), most previous studies have only focused on radionuclide interactions with pure Na-montmorillonite phases. Hence, in this study, we will investigate the influence of calcite impurities on uranium(VI) (U(VI)) solution speciation and sorption behavior in bentonite systems. In the presence of water, calcite impurities are expected to lead to milli-molar concentrations of dissolved calcium over a wide range of pH conditions. Consequently, Ca 2+ could – at least partially – replace Na + on clay cation exchange sites, with further implications for exchange reactions of cationic U(VI) species. In addition, ternary U(VI)-Ca-carbonate solution species (CaUO 2 (CO 3 ) 3 2- and Ca 2 UO 2 (CO 3 ) 3 ) will largely replace U(VI)-carbonate species (UO 2 (CO 3 ) 3 4- and UO 2 (CO 3 ) 2 2- ) at alkaline pH. These larger, but lower-charged U(VI) species, may show different sorption and diffusion characteristics, e.g. if their access to negatively-charged clay interlayer spaces is different from binary U(VI)-carbonate complexes. In this presentation, we will first demonstrate the impacts of calcite impurities on U(VI) solution speciation based on PHREEQC simulations. We will then discuss first results from U(VI) sorption studies in these systems. This research is being performed using funding received from the DOE Office of Nuclear Energy's Nuclear Energy University Program.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Characterization of U(VI)-Bearing Precipitates Produced by Ammonia Gas Injection Technology for Unsaturated Sediments - 16600

The processing of irradiated fuel to extract plutonium for the nuclear arsenal has resulted in a legacy of uranium contamination in the vadose zone (VZ) of the Hanford 200 Area. This contamination is a potential source for groundwater contamination, posing a risk to receptors through water uptake from contaminated wells or discharges to surface water. The injection of reactive gases is an innovative technology being evaluated for reducing the mobility of radionuclide contaminants in the Hanford vadose zone. Ammonia (NH{sub 3}) gas in particular has been used to reduce uranium mobility in laboratory scale studies and is being evaluated for field scale application. The sediment of the Hanford vadose zone is composed of a complex of mineral phases including quartz, feldspar, mica, and calcium carbonates. The silica content in the 200 Area subsurface markedly outweighs the majority of elements, with aluminum following closely. The injection of ammonia gas into the vadose zone is associated with an increase in pH conditions as the gas partitions into the pore water. The resulting alkaline conditions significantly increase the solubility of some aluminum and silicate-containing minerals within the system. As pH decreases to natural conditions, the aluminosilicate minerals will precipitate, potentially coating and sequestering the uranium contaminants. Although previous laboratory scale tests have shown decreased uranium mobility, there are many questions regarding the application of the remediation method to 200 Area vadose zone conditions. In particular, additional testing is required to understand the impact of various environmental factors on the formation of uranium mineral phases with the application of the NH{sub 3} injection method. In order to answer some of the unknowns regarding this remediation technology for the 200 Area vadose zone, an effort was made to characterize the uranium-bearing precipitates being formed with the injection of ammonia gas. Rather than a sediment-water system, a synthetic pore water solution was prepared using the ion concentrations relevant to the 200 Area vadose zone. These solutions were limited to select constituents believed to play a major role in the remediation process. The use of this carefully composed solution allows for the thorough evaluation of the contribution the variable components make to the formation of the solid analyte. The characterization of solid samples was attempted using a host of complementary analytical techniques including scanning electron microscopy with energy dispersive spectroscopy (SEM-EDS) and X-ray diffraction (XRD). Though characterization of the samples is ongoing, the data produced thus far has allowed for the imaging and X-ray spectroscopy of the solid uranium phases produced as well as a tentative identification of cejkaite (Na{sub 4}(UO{sub 2})(CO{sub 3}){sub 3}) as the major uranium mineral phase. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Quantitative Analysis of Micro-structural Changes in a Bituminous Coal After Exposure to Supercritical CO{sub 2} and Water

High-volatile bituminous coal samples were reacted in deionized water with supercritical CO{sub 2} (ScCO{sub 2}–water) under simulated in situ pressure and temperature conditions (8 MPa and 40 °C) in unconfined stress state for 14 days, in order to characterize potential CO{sub 2}–water–coal reactions. Micro-structural changes were identified pre- and post-experiment using X-ray powder diffraction (XRD) analysis for powdered coal (mineralogical changes), optical microscopy and scanning electron microscopy (SEM) for polished thin sections (surface feature changes) and micro-CT scanning for a small core (porosity and permeability changes). XRD analysis revealed that carbonic acid leaches out mineral matters in coal, including carbonates (calcite) and silicate minerals (albite, illite and kaolinite). Optical microscopy, SEM and CT images confirmed that the interaction of coal with ScCO{sub 2}–water causes an abundance of micro-cracks to open or propagate in unconfined coal samples. Most micro-cracks preferably propagated along maceral–mineral and maceral–maceral interfaces, which demonstrates that the micro-cracking was caused by differential swelling of different coal lithotypes. Wormhole formation was observed in coal caused by mineral dissolution and hydrocarbon mobilization, which significantly increases coal porosity compared with swelling-induced cracking. 3-D pore network models extracted from CT images show that ScCO{sub 2}–water treatment enlarges the pore and throat size, increases the numbers of pores and throats and improves pore network connectivity. Overall, CO{sub 2}–water–coal interactions under unconfined conditions enhance coal porosity, connectivity and permeability, which can be attributed to the combined effect of micro-cracking, mineral dissolution and hydrocarbon mobilization.

58 GEOSCIENCES↗

Friction-Induced Changes in the Surface Structure of Basalt and Granite

Friction-induced changes in the structure of the surface layer of basalt and granite samples extracted from a well in the triggered seismicity zone in the Koyna–Warna region, India, have been studied by infrared, Raman, and photoluminescence spectroscopy. It has been found that friction leads to a partial degradation of quartz, albite, and clinopyroxenes crystals. Instead of these crystals, a thin layer of a mineral with a low coefficient of friction—kaolinite—is formed on the surface.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Carbonation of Clay Minerals Exposed to scCO 2 /Water at 200° and 250°C

To clarify the mechanisms of carbonation of clay minerals, such as bentonite, kaolinite, and soft clay, we exposed them to supercritical carbon dioxide (scCO 2 )/water at temperatures of 200° and 250°C and pressures of 1500 and 2000 psi for 72- and 107-hours. Bentonite, comprising three crystalline phases, montmorillonite (MMT), anorthoclase-type albite, and quartz was susceptible to reactions with ionic carbonic acid yielded by the interactions between scCO 2 and water, particularly MMT and anorthoclase-type albite phases. For MMT, the cation-exchangeable ions, such as Na + and Ca 2+ , present in its basal interplanar space, were replaced by proton, H + , from ionic carbonic acid; thereafter, the cations leaching from MMT directly reacted with CO 3 2- as a counter ion of H + to form carbonate compounds. Such in-situ carbonation process in basal space caused the shrinkage and breakage of the spacing structure within MMT. In contrast, the wet carbonation of anorthoclase-type albite, categorized as rock minerals, entailed the formation of three amorphous by-products, such as carbonates, kaolinite-like compounds, and silicon dioxide. Together, these two different carbonations caused the disintegration and corruption of bentonite. Kaolinite clay containing the amorphous carbonates and silicon dioxide was inert to wet carbonation. We noted only a gain in weight due to its water uptake, suggesting that kaolinite-like by-products generated by the wet carbonation of rock minerals might remain unchanged even during extended exposure. Soft clay consisting of two crystalline phases, dolomite and silicon dioxide, also was unaltered by wet carbonation, despite the uptake of water.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Susceptibility of Granite Rock to scCO 2 /Water at 200°C and 250°C

Granite rock comprising anorthoclase-type albite and quartz as its major phases and biotite mica as the minor one was exposed to supercritical carbon dioxide (scCO 2 )/water at 250 C and 13.78 MPa pressure for 104 hours. For comparison purpose, four other rocks, albite, hornblende, diorite, and quartz, also were exposed. During the exposure of granite, ionic carbonic acid, known as the wet carbonation reactant, preferentially reacted with anorthoclase-type albite and biotite, rather than with quartz. The susceptibility of biotite to wet carbonation was higher than that of anorthoclase-type albite. All the carbonation by-products of anorthoclase-type albite were amorphous phases including Na- and K-carbonates, a kaolinite clay-like compound, and silicon dioxide, while wet carbonation converted biotite into potassium aluminum silicate, siderite, and magnesite in crystalline phases and hydrogen fluoride (HF). Three of these reaction by-products, Na- and K-carbonates and HF, were highly soluble in water. Correspondingly, the carbonated top surface layer, about 1.27 mm thick as carbonation depth, developed porous microstructure with numerous large voids, some of which have a size of ≥10 μm, reflecting the erosion of granite by the leaching of these water-soluble reaction by-products. Comparing with this carbonation depth, its depth of other minerals was considerable lower, particularly, for hornblende and diorite with 0.07 and 0.02 mm, while no carbonate compound was detected in quartz. The major factor governing these low carbonation depths in these rocks was the formation of water-insensitive scale-like carbonate by-products such as calcite (CaCO 3 ), siderite (FeCO 3 ), and magnesite (MgCO 3 ). Their formation within the superficial layer of these minerals served as protective barrier layer that inhibits and retards further carbonation of fresh underlying minerals, even if the exposure time was extended. Thus, the coverage by this barrier layer of the non-carbonated surfaces of the underlying rock was reason why the hornblende and diorite exhibited a minimum depth of carbonation. Under exposure to the scCO 2 /water at 200 C and 10.34 MPa pressure for up to 42 days, the ranking of the magnitude of erosion caused by wet carbonation was in the following order; granite > albite > hornblende > diorite > quartz. The eroding-caused weight loss of granite (0.88 %) was ~2.4, ~5.2, ~9.8, and ~17.6 times greater than that of albite, hornblends, diorite, and quartz, respectively.

15 GEOTHERMAL ENERGY↗