Search NASA⌕ Search

SEARCH · Search NASA

Results for “FLAME”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29

How ''flat'' is the rich premixed flame produced by your McKenna burner?

McKenna burners are widely used in the combustion community for producing ''flat'' premixed flames. These flames are considered as standards for the development and calibration of optical techniques. Rich premixed flames produced by McKenna burners are frequently investigated in order to understand soot formation processes both by optical and by sampling techniques. Measurements are normally performed along the axis of the flames, with a uniform distribution of temperature and species concentration assumed in the radial direction. In this work it is shown that the soot radial profiles of rich premixed ethylene-air flames produced by a McKenna burner with a stainless steel porous plug may be far from being ''flat.'' Soot is mainly distributed in an annular region and nonsoot fluorescing species are present in the core of the flames. This surprising result was verified under several working conditions. Furthermore, flames cannot be considered axial-symmetric but present a skewed soot distribution. Another McKenna burner with a bronze porous disk was used to produce flames of the same equivalence ratio and flows. These flames show a completely different soot radial profile, closer to the claimed flat distribution. These results cast doubts about the conclusions drawn in several studies on soot formation performed with a stainless steel McKenna burner. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Soot precursor measurements in benzene and hexane diffusion flames

To clarify the mechanism of soot formation in diffusion flames of liquid fuels, measurements of soot and its precursors were carried out. Sooting diffusion flames formed by a small pool combustion equipment system were used for this purpose. Benzene and hexane were used as typical aromatic and paraffin fuels. A laser-induced fluorescence (LIF) method was used to obtain spatial distributions of polycyclic aromatic hydrocarbons (PAHs), which are considered as soot particles. Spatial distributions of soot in test flames were measured by a laser-induced incandescence (LII) method. Soot diameter was estimated from the temporal change of LII intensity. A region of transition from PAHs to soot was defined from the results of LIF and LII. Flame temperatures, PAH species, and soot diameters in this transition region were investigated for both benzene and hexane flames. The results show that though the flame structures of benzene and hexane were different, the temperature in the PAHs-soot transition region of the benzene flame was similar to that of the hexane flame. Furthermore, the relationship between the PAH concentrations measured by gas chromatography in both flames and the PAH distributions obtained from LIF are discussed. It was found that PAHs with smaller molecular mass, such as benzene and toluene, remained in both the PAHs-soot transition and sooting regions, and it is thought that molecules heavier than pyrene are the leading candidates for soot precursor formation. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Turbulence effects on cellular burning structures in lean premixed hydrogen flames

We present numerical simulations of lean hydrogen flames interacting with turbulence. The simulations are performed in an idealized setting using an adaptive low Mach number model with a numerical feedback control algorithm to stabilize the flame. At the conditions considered here, hydrogen flames are thermodiffusively unstable, and burn in cellular structures. For that reason, we consider two levels of turbulence intensity and a case without turbulence whose dynamics is driven by the natural flame instability. An overview of the flame structure shows that the burning in the cellular structures is quite intense, with the burning patches separated by regions in which the flame is effectively extinguished. We explore the geometry of the flame surface in detail, quantifying the mean and Gaussian curvature distributions and the distribution of the cell sizes. We next characterize the local flame speed to quantify the effect of flame intensification on local propagation speed. We then introduce several diagnostics aimed at quantifying both the level of intensification and diffusive mechanisms that lead to the intensification. (author)

08 HYDROGEN↗

Response dynamics of bluff-body stabilized conical premixed turbulent flames with spatial mixture gradients

Response of bluff-body stabilized conical turbulent premixed flames was experimentally studied for a range of excitation frequencies (10-400 Hz), mean flow velocities (5, 10 and 15 m/s) and three different spatial mixture distributions (uniform, inner and outer enrichment). Upstream excitation was provided by a loudspeaker producing velocity oscillation amplitudes of about 8% of the mean flow velocity. Flame response was detected by a photomultiplier observing the CH{sup *} emission from the flame. The studied turbulent flames exhibited transfer function characteristics of a low-pass filter with a cutoff Strouhal number between 0.08 and 0.12. The amplification factors at low frequencies ranged from 2 to 20 and generally increased for mean flow velocities from 5 to 15 m/s. The highest levels of amplification were found for the outer mixture enrichment followed in decreasing order by uniform and inner mixture gradient cases. The high levels of flame response for the outer enrichment case were attributed to the enhanced flame-vortex interaction in outer jet shear layer. At high excitation levels (u{sup '}/U{sub m}{approx}0.3) for U{sub m}=5 m/ s where non-linear flame response is expected, the flame exhibited a reduced amplitude response in the frequency range between 40 and 100 Hz for the uniform and outer equivalence ratio gradient cases and no discernible effect for the inner equivalence ratio gradient. In all cases, transfer function phase was found to vary linearly with excitation frequency. Finally, a relationship between the amplitude characteristics of the bluff-body wake transfer function and flame blowoff equivalence ratio was presented. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A level set formulation for premixed combustion LES considering the turbulent flame structure

In this paper, a consistent and rigorous formulation is developed for the coupling of the G-equation model to an LES flow solver that describes the interactions of the scales of the flame, the turbulence, and the filtering procedure from the resolved turbulence regime to the broadened preheat regions regime. A progress variable equation is introduced to describe the filtered flame structure. The models provided for the sub-filter diffusivity and the filtered reaction term appearing in this equation are consistent with the solution of the G-equation model. The solution of the progress variable equation ensures that the resolved part of the turbulent mixing in the preheat region can be described. However, the C-field is underresolved if the sub-filter Damkoehler number is not much smaller than unity, and hence the solution of the C-equation cannot be expected to produce the correct flame propagation speed. The coupling with the G-equation ensures that the flame front described by the filtered reaction progress variable moves with the correct propagation velocity, independent of numerical diffusion caused by an underresolution of the flame. Formulations both for low-Mach number flow solvers and for fully compressible solvers are presented. To validate the formulation, the model is applied in compressible LES of two turbulent flames anchored by a triangular flame-holder. For the statistically stationary case, the mean and RMS progress variable are in very good agreement with experimental data, demonstrating that the model correctly reproduces the flame anchoring and the flame-turbulence interactions in the recirculation zone. For the acoustically pulsed case, the LES fields show the same large scale fluctuations that are present in the experimental data. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Measurements of combustion properties in a microwave enhanced flame

Microwave induced flame speed enhancement is quantified in a laminar, premixed CH{sub 4}/air wall stagnation flat flame. Experiments were performed in a high Q microwave cavity with the cavity tuned so that the maximum microwave field is located in the vicinity of a flat flame front. Equivalence ratios were varied between 0.6 and 0.8. When the flame is radiated by a continuous wave microwave field of approximately 5 kV/cm, the flame front is observed to move towards the burner exit and stabilize at a standoff distance corresponding to a flame speed increase of up to 20%. No microwave discharge is observed, indicating that the enhanced flame speed arises from microwave energy deposited directly into the reaction zone through coupling to the weakly ionized gas in that region. Laser diagnostics were performed to quantify temperature increase, the laminar flame speed enhancement, and changes in the OH radical concentration through filtered Rayleigh scattering, particle image velocimetry, and planar laser induced fluorescence, respectively. These measurements indicate that microwave radiation may prove to be an effective means to non-invasively control and enhance flame stability in combustors. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Characterisation of an oxy-coal flame through digital imaging

This paper presents investigations into the impact of oxy-fuel combustion on flame characteristics through the application of digital imaging and image processing techniques. The characteristic parameters of the flame are derived from flame images that are captured using a vision-based flame monitoring system. Experiments were carried out on a 0.5 MW{sub th} coal combustion test facility. Different flue gas recycle ratios and furnace oxygen levels were created for two different coals. The characteristics of the flame and the correlation between the measured flame parameters and corresponding combustion conditions are described and discussed. The results show that the flame temperature decreases with the recycle ratio for both test coals, suggesting that the flame temperature is effectively controlled by the flue gas recycle ratio. The presence of high levels of CO{sub 2} at high flue gas recycle ratios may result in delayed combustion and thus has a detrimental effect on the flame stability. (author)

01 COAL, LIGNITE, AND PEAT↗

Response of partially premixed flames to acoustic velocity and equivalence ratio perturbations

This article describes an experimental investigation of the forced response of a swirl-stabilized partially premixed flame when it is subjected to acoustic velocity and equivalence ratio fluctuations. The flame's response is analyzed using phase-resolved CH{sup *} chemiluminescence images and flame transfer function (FTF) measurements, and compared with the response of a perfectly premixed flame under acoustic perturbations. The nonlinear response of the partially premixed flame is manifested by a partial extinction of the reaction zone, leading to rapid reduction of flame surface area. This nonlinearity, however, is observed only when the phase difference between the acoustic velocity and the equivalence ratio at the combustor inlet is close to zero. The condition, {delta}{phi}{sub {phi}}'-V'{approx}0 , indicates that reactant mixtures with high equivalence ratio impinge on the flame front with high velocity, inducing large fluctuations of the rate of heat release. It is found that the phase difference between the acoustic velocity and equivalence ratio nonuniformities is a key parameter governing the linear/nonlinear response of a partially premixed flame, and it is a function of modulation frequency, inlet velocity, fuel injection location, and fuel injector impedance. The results presented in this article will provide insight into the response of a partially premixed flame, which has not been well explored to date. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Spherically expanding flame in silane–hydrogen–nitrous oxide–argon mixtures

The effect of silane addition on the laminar flame speed ($S^0_u$) of flames propagating in hydrogen–nitrous oxide–argon mixtures has been investigated experimentally for the first time using the spherically expanding flame technique in a constant volume combustion chamber. Replacing hydrogen by silane and maintaining the equivalence ratio constant, much higher flame speeds, explosion peak pressures, and pressure rise coefficients were measured. A previously developed detailed reaction model has been updated based on ab initio thermodynamic properties calculations and collision limit violation analysis. The improved reaction model demonstrates encouraging performance in predicting the flame speed, with a mean absolute error below 11%. To explain the effect of silane addition on the flame dynamics, a number of parameters have been calculated including OH and H rate of production, heat release rate per reaction, and sensitivity coefficient on . The dynamics of freely propagating flames in SiH 4 –H 2 –N 2 O–Ar mixtures is essentially controlled by reactions of the H–O–N chemical system: N 2 O+H=N 2 +OH, OH+H 2 =H 2 O+H, and N 2 O(+M)=N 2 +O(+M). Whereas silane addition does not influence much the rate of production of OH, it significantly modifies that of H with a number of pyrolytic chemical pathways of silicon hydrides, such as SiH+H 2 =SiH 2 +H and Si+H 2 =SiH+H, which act as sink of H atom as they proceed in the backward direction. The reactions forming SiO(s) and SiO 2 (s), such as SiO+OH=SiO 2 (s)+H and 2SiO=2SiO(s), are exothermic and significantly contribute to the temperature increase. The adiabatic, constant pressure flame temperature for mixture containing silane is significantly higher, up to several 100’s K. The increase of induced by silane addition seems to be mostly related to the large increase of the flame temperature which leads to higher energy release rate.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Pressure effects on reactivity and extinction of n -dodecane diffusion cool flame

Low-temperature combustion at high pressure has gained increasing interest owing to the growing demand for clean and efficient propulsion and energy systems. In particular, cool flame structure, extinction limits, and fuel reactivities at high pressure are critical in affecting the engine performance at near-limit conditions. Here, this paper investigates the effects of pressure on the cool flame extinction limit, structure, radical index, reactivity, and oxygen concentration dependence by experiments, analysis, and modeling. A large n-alkane, namely n-dodecane (n C 12 H 26 ), is selected to study its diffusion cool flame dynamics and reactivity in a high-pressure counterflow burner up to 10 atm. The experimental results show that higher pressure increases the cool flame extinction strain rates, and that the pressure-weighted extinction strain rate (aP) is proportional to the square of pressure, P 2 . A scaling analysis explains the relationship between the dependence of flame structure, heat release rate, and pressure-weighted cool flame strain rate on pressure. Furthermore, radical indexes at different pressures are measured by isolating the thermal and transport effects from the chemical contribution to diffusion cool flame extinction. The radical index clearly shows that the low-temperature reactivity increases with pressure. In addition, due to the critical role of multiple oxygen addition reactions in low-temperature chemistry, the relationship between the cool flame extinction limit and the oxygen concentration is explored. It is found that the cool flame extinction limits are proportional to the n th power of the oxygen concentration, [O 2 ] n , and increasing pressure leads to stronger extinction limit dependence (larger n) on the oxygen concentration. The present experiment and detailed kinetic analysis show clearly that increasing pressure promotes the low-temperature chemistry including the oxygen addition reactions, while the scaling analysis explains well the experimental results.

33 ADVANCED PROPULSION SYSTEMS↗

Characteristic of cryogenic hydrogen flames from high-aspect ratio nozzles

Unintentional leaks at hydrogen fueling stations have the potential to form hydrogen jet flames, which pose a risk to people and infrastructure. The heat flux from these jet flames are often used to develop separation distances between hydrogen components and buildings, lot-lines, etc. The heat flux and visible flame length is well understood for releases from round nozzles, but real unintended leaks would be expected to be from higher aspect-ratio cracks. Here, we measured the visible flame length and heat-flux characteristics of cryogenic hydrogen flames from high-aspect ratio nozzles. Heat flux measurements from 5 radiometers were used to assess the single-point vs the multi-point methods for interpretation of heat flux sensor data, finding the axial distance of the sensor for a single-point heat flux measurement to be important. We compare the flame length and heat flux data to flames of both cryogenic and compressed hydrogen from round nozzles. The aspect ratio of the release does not affect the flame length or heat flux significantly, for a given mass flow under the range of conditions studied. The engineering correlations presented in this work enable the prediction of flame length and heat flux which can be used to assess risk at hydrogen fueling stations with liquid hydrogen and develop science-based separation distances for these stations.

08 HYDROGEN↗

Effects of equivalence ratio variations on turbulent flame speed in lean methane/air mixtures under lean-burn natural gas engine operating conditions

Direct numerical simulations of turbulent premixed air flames were carried out using an inflow-outflow configuration to study the effects of equivalence ratio on the turbulent flame speed in lean mixtures. The inflow velocity was dynamically adjusted at a run-time to stabilize the flame brush location within the computational domain. Linear forcing was applied to maintain the turbulent intensities at desired levels. Numerous equivalence ratios near the lean limit were selected for the same turbulence properties and the normalized turbulent flame speed was shown to be a function of the equivalence ratio. Simulations were performed for over 80 eddy turnover times with the turbulent flame speed obtained by averaging the inflow velocity. Results revealed that the equivalence ratio does not have an explicit effect on the normalized turbulent flame speed over the lean limit. Analysis of flame surface area showed that the surface wrinkling produced by eddies of varying scales was not influenced by the change in equivalence ratios when the Karlovitz and Damkohler numbers are fixed. Lastly based on the flame surface statistics flame surface normal is preferentially parallel to the most compressive strain rate direction for all equivalence ratios.

03 NATURAL GAS↗

Effect of an inlet temperature disturbance on the propagation of methane-air premixed flames in small tubes

A flame stabilized in a tube is affected by the temperature disturbance and velocity profile at the inlet boundary. Thus, a multi-dimensional analysis is necessary near the flame. The deviation between one-dimensional and two-dimensional analyses near the flame was investigated quantitatively. The temperature profile in the radial direction was varied to investigate its effects on the propagation of methane-air premixed flames in small tubes. A numerical experiment with Navier-Stokes equations, an energy equation and species equations was conducted coupled with a single-step global-reaction model. Three different temperature profiles were examined for slip and no-slip wall boundary conditions. The effect of temperature profiles on the flame propagation velocity and flame shapes was not negligible depending on the magnitude of the temperature deviation and the tube diameter. This study evaluated a critical length scale of a computational domain or a thermal entrance length of a premixed flame over which the inlet temperature disturbance does not affect the flame characteristics. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effects of fresh gas velocity and thermal expansion on the structure of a Bunsen flame tip

Numerical computations and order-of-magnitude estimates are used to describe the tip region of a Bunsen flame where the flame departs from a planar flame at an angle to the incoming fresh gas flow. A single irreversible Arrhenius reaction with high activation energy is assumed. The well-known linear relation between flame velocity and curvature is recovered in the thermodiffusive limit, when the thermal expansion of the gas is left out, for velocities of the fresh gas (U{sub 0}) only slightly larger than the velocity of a planar flame (U{sub L}), provided this flame is stable. For large values of the velocity ratio U{sub 0}/U{sub L}, the tip region becomes slender and the curvature of the reaction sheet at the tip increases proportionally to U{sub 0}/U{sub L}. The thermal expansion of the gas across the flame reduces the aspect ratio of the tip region. A qualitative analysis of the structure of the tip region for very exothermic reactions shows that this region ceases to be slender when the burnt-to-fresh gas temperature ratio becomes of the order of the velocity ratio U{sub 0}/U{sub L}. For even larger values of the temperature ratio, the tip region becomes a cap of characteristic size not very different from the thickness of a planar flame. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Dual-pump CARS temperature and major species concentration measurements in counter-flow methane flames using narrowband pump and broadband Stokes lasers

Dual-pump coherent anti-Stokes Raman scattering (CARS) is used to measure temperature and species profiles in representative non-premixed and partially-premixed CH{sub 4}/O{sub 2}/N{sub 2} flames. A new laser system has been developed to generate a tunable single-frequency beam for the second pump beam in the dual-pump N{sub 2}-CO{sub 2} CARS process. The second harmonic output ({proportional_to}532 nm) from an injection-seeded Nd:YAG laser is used as one of the narrowband pump beams. The second single-longitudinal-mode pump beam centered near 561 nm is generated using an injection-seeded optical parametric oscillator, consisting of two non-linear {beta}-BBO crystals, pumped using the third harmonic output ({proportional_to}355 nm) of the same Nd:YAG laser. A broadband dye laser (BBDL), pumped using the second harmonic output of an unseeded Nd:YAG laser, is employed to produce the Stokes beam centered near 607 nm with full-width-at-half-maximum of {proportional_to}250 cm{sup -1}. The three beams are focused between two opposing nozzles of a counter-flow burner facility to measure temperature and major species concentrations in a variety of CH{sub 4}/O{sub 2}/N{sub 2} non-premixed and partially-premixed flames stabilized at a global strain rate of 20 s{sup -1} at atmospheric-pressure. For the non-premixed flames, excellent agreement is observed between the measured profiles of temperature and CO{sub 2}/N{sub 2} concentration ratios with those calculated using an opposed-flow flame code with detailed chemistry and molecular transport submodels. For partially-premixed flames, with the rich side premixing level beyond the stable premixed flame limit, the calculations overestimate the distance between the premixed and the non-premixed flamefronts. Consequently, the calculated temperatures near the rich, premixed flame are higher than those measured. Accurate prediction of the distance between the premixed and the non-premixed flames provides an interesting challenge for future computations. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The effect of strain rate on polycyclic aromatic hydrocarbon (PAH) formation in acetylene diffusion flames

Acetylene is a ubiquitous combustion intermediate that is also believed to be the major precursor for aromatic, polycyclic aromatic hydrocarbon (PAH), and soot formation in both hydrocarbon and halogenated hydrocarbon flames. However, in spite of its important role as a flame intermediate, the detailed chemical structures of acetylene diffusion flames have not been studied in the past. Here the detailed chemical structures of counterflow diffusion flames of acetylene at strain rates of 37.7 and 50.3 s{sup -1} are presented. Both flames possessed the same carbon density of 0.37 g/L corresponding to an acetylene mole fraction of 0.375 in argon on the fuel side, and an oxygen mole fraction of 0.22 in argon on the oxidizer side. Concentration profiles of a large number of major, minor, and trace species, including a wide spectrum of aromatics and PAH, have been determined by direct sampling from flames using a heated quartz microprobe coupled to an online gas chromatograph/mass selective detector (GC/MSD). Temperature profiles were made using a thermocouple and the rapid insertion technique. Although the major species concentrations were nearly the same in the two flames, the mole fraction profiles of trace combustion by-products were significantly lower in the higher-strain-rate flame, by nearly two orders of magnitude for PAH. These comparative results provide new information on the trace chemistries of acetylene flames and should be useful for the development and validation of detailed chemical kinetic mechanisms describing the formation of toxic by-products in the combustion of hydrocarbons and halogenated hydrocarbons. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structural study of non-premixed tubular hydrocarbon flames

Tubular non-premixed flames are formed by a uniquely designed opposed tubular burner. Structural measurements of hydrocarbon flames are conducted using the laser-induced Raman scattering technique. Temperature and major species concentrations are recorded for flames produced by 30% CH{sub 4}/N{sub 2} and 15% C{sub 3}H{sub 8}/N{sub 2} burning against air. Numerical simulations of these flames with detailed chemistry show good agreement between the measured and simulated results. By comparing the numerical results of the tubular curved flames to those of the opposed-jet planar flames, it is shown that flame curvature towards the fuel stream strongly effects the temperature ({+-}80 K) of flames with low fuel Lewis number (15% H{sub 2}/N{sub 2}, Le{sub f} = 0.41). The effect of curvature on flames with high (15% C{sub 3}H{sub 8}/N{sub 2}, Le{sub f} = 1.51) and near-unity (30% CH{sub 4}/N{sub 2}, Le{sub f}{approx_equal}1) fuel Lewis numbers is much less. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ionization and chemiluminescence during the progressive aeration of methane flames

Saturation currents and chemiluminescence, especially at the CH{sup *} and C{sub 2}{sup *} wavelengths, are measured for a range of small, laminar methane flames during progressive addition of air, with the principal objective of distinguishing between pure diffusion flames, premixed flames of compositions falling between the upper and lower flammability limits, and the broad range of aerated flames lying in between these regimes. Flame areas defined by the loci of maximum luminosity and by schlieren contours were recorded, so that saturation current densities, CH{sup *} and C{sub 2}{sup *} emission per unit flame area, as well as burning velocities could be deduced. For admixtures of less than 70 vol.%, air appears to act, surprisingly, as an inert diluent as regards saturation currents, so that saturation currents are essentially proportional to fuel flow alone. Much the same applies to chemiluminescence. However, schlieren contours, which were recorded both to provide a basis for burning velocity measurements and to explore density changes in the reactants, indicated the presence of a burner - stabilised propagating reaction zone ahead of the luminous flame surface starting at around 50 vol.% and possibly even at lower air admixtures. This evidence of a steep change in refractive index is indicative of a premixed reaction zone involving the added oxygen, which however generates no chemi-ionization and emits no light. Even photographing the flame by radiation emitted at the CH{sup *} and C{sub 2}{sup *} wavelengths shows no sign of its existence. Its burning velocity is about 10 cm/s, when stabilized by the surrounding diffusion flame. The most plausible rationale for these observations is the formation of syngas by the partial oxidation of methane. The subsequent burning of CO and H{sub 2} is known to occur without chemi-ionization or appreciable light emission. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗