Search NASA⌕ Search

SEARCH · Search NASA

Results for “FLAME”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29

Control of Early Flame Kernel Growth by Multi-Wavelength Laser Pulses for Enhanced Ignition

The present contribution examines the impact of plasma dynamics and plasma-driven fluid dynamics on the flame growth of laser ignited mixtures and shows that a new dual-pulse scheme can be used to control the kernel formation process in ways that extend the lean ignition limit. We do this by performing a comparative study between (conventional) single-pulse laser ignition (λ = 1064 nm) and a novel dual-pulse method based on combining an ultraviolet (UV) pre-ionization pulse (λ = 266 nm) with an overlapped near-infrared (NIR) energy addition pulse (λ = 1064 nm). We employ OH* chemiluminescence to visualize the evolution of the early flame kernel. For single-pulse laser ignition at lean conditions, the flame kernel separates through third lobe detachment, corresponding to high strain rates that extinguish the flame. In this work, we investigate the capabilities of the dual-pulse to control the plasma-driven fluid dynamics by adjusting the axial offset of the two focal points. In particular, we find there exists a beam waist offset whereby the resulting vorticity suppresses formation of the third lobe, consequently reducing flame stretch. With this approach, we demonstrate that the dual-pulse method enables reduced flame speeds (at early times), an extended lean limit, increased combustion efficiency, and decreased laser energy requirements.

42 ENGINEERING↗

Validation of a mixture-averaged thermal diffusion model for premixed lean hydrogen flames

The mixture-averaged thermal diffusion model originally proposed by Chapman and Cowling is validated using multiple flame configurations. Simulations using detailed hydrogen chemistry are done on one-, two-, and three-dimensional flames. The analysis spans flat and stretched, steady and unsteady, and laminar and turbulent flames. Quantitative and qualitative results using the thermal diffusion model compare very well with the more complex multicomponent diffusion model. Comparisons are made using flame speeds, surface areas, species profiles, and chemical source terms. Once validated, this model is applied to three-dimensional laminar and turbulent flames. For these cases, thermal diffusion causes an increase in the propagation speed of the flames as well as increased product chemical source terms in regions of high positive curvature. The results illustrate the necessity for including thermal diffusion, and the accuracy and computational efficiency of the mixture-averaged thermal diffusion model.

Schlup, Jason↗

Evidence of thermonuclear flame spreading on neutron stars from burst rise oscillations

Burst oscillations during the rising phases of thermonuclear X-ray bursts are usually believed to originate from flame spreading on the neutron star surface. However, the decrease of fractional oscillation amplitude with rise time, which provides a main observational support for the flame spreading model, have so far been reported from only a few bursts. Moreover, the non-detection and intermittent detections of rise oscillations from many bursts are not yet understood considering the flame spreading scenario. Here, we report the decreasing trend of fractional oscillation amplitude from an extensive analysis of a large sample of Rossi X-ray Timing Explorer Proportional Counter Array bursts from 10 neutron star low-mass X-ray binaries. This trend is 99.99% significant for the best case, which provides, to the best of our knowledge, by far the strongest evidence of such a trend. Moreover, it is important to note that an opposite trend is not found in any of the bursts. The concave shape of the fractional amplitude profiles for all the bursts suggests latitude-dependent flame speeds, possibly due to the effects of the Coriolis force. We also systematically study the roles of low fractional amplitude and low count rate for non-detection and intermittent detections of rise oscillations, and attempt to understand them within the flame spreading scenario. Our results support a weak turbulent viscosity for flame spreading, and imply that burst rise oscillations originate from an expanding hot spot, thus making these oscillations a more reliable tool to constrain the neutron star equations of state.

79 ASTRONOMY AND ASTROPHYSICS↗

Predictions of Transient Flame Lift-Off Length With Comparison to Single-Cylinder Optical Engine Experiments

A state-of-the-art, grid-convergent simulation methodology was applied to three-dimensional calculations of a single-cylinder optical engine. A mesh resolution study on a sector-based version of the engine geometry further verified the RANS-based cell size recommendations previously presented by Senecal et al. (“Grid Convergent Spray Models for Internal Combustion Engine CFD Simulations,” ASME Paper No. ICEF2012-92043). Convergence of cylinder pressure, flame lift-off length, and emissions was achieved for an adaptive mesh refinement cell size of 0.35 mm. Furthermore, full geometry simulations, using mesh settings derived from the grid convergence study, resulted in excellent agreement with measurements of cylinder pressure, heat release rate, and NOx emissions. On the other hand, the full geometry simulations indicated that the flame lift-off length is not converged at 0.35 mm for jets not aligned with the computational mesh. Further simulations suggested that the flame lift-off lengths for both the nonaligned and aligned jets appear to be converged at 0.175 mm. With this increased mesh resolution, both the trends and magnitudes in flame lift-off length were well predicted with the current simulation methodology. Good agreement between the overall predicted flame behavior and the available chemiluminescence measurements was also achieved. Our present study indicates that cell size requirements for accurate prediction of full geometry flame lift-off lengths may be stricter than those for global combustion behavior. This may be important when accurate soot predictions are required.

42 ENGINEERING↗

A General Study of Counterflow Diffusion Flames for Supercritical CO2 Combustion

Abstract A counterflow diffusion flame for supercritical CO2 combustion is investigated at various CO2 dilution levels and pressures by accounting for real gas effects into both thermal and transport properties. The UCF 1.1 24-species mechanism is used to account the chemistry. The nature of important nonpremixed combustion characteristics such as Prandtl number, thermal diffusivity, Lewis number, stoichiometric scalar dissipation rate, flame thickness, and Damköhler number are investigated with respect to CO2 dilution and pressure. The results show that the aforementioned parameters are influenced by both dilution and pressure; the dilution effect is more dominant. Further, the result shows that Prandtl number increases with CO2 dilution and at 90% CO2 dilution, the difference between the Prandtl number of the inlet jets and the flame is minimal. Also, the common assumption of unity Lewis number in the theory and modeling of nonpremixed combustion does not hold reasonable for sCO2 applications due to large difference of Lewis number across the flame and the Lewis number on the flame drop significantly with an increase in the CO2 dilution. An interesting relation between Lewis number and CO2 dilution is observed. The Lewis number of species drops by 15% when increasing the CO2 dilution by 30%. Increasing the CO2 dilution increases both the flow and chemical timescales; however, chemical timescale increases faster than the flow timescales. The magnitudes of the Damköhler number signify the need to consider finite rate chemistry for sCO2 applications. Further, the Damköhler numbers at 90% sCO2 dilution are very small; hence, laminar flamelet assumptions in turbulent combustion simulations are not physically correct for this application. Also, it is observed that the Damköhler number drops nonlinearly with increasing CO2 dilution in the oxidizer stream. This is a very important observation for the operation of sCO2 combustors. Further, the flame thickness is found to increase with CO2 dilution and reduce with pressure.

Engineering↗

Modeling Premixed Flame Response to Transverse Acoustic Modes

During a thermoacoustic instability, the flame is disturbed by both the “direct” acoustic waves, as well as the “indirect” vortical structures excited by the acoustic disturbances. For lower frequency axial modes, there is significant evidence that the “indirect” vortical disturbances are much larger in magnitude and dominate the heat release excitation. This paper provides an analysis of the “direct” velocity coupled flame response to transverse modes; it was motivated by phenomenological arguments by prior researchers showing that these modes always have positive Rayleigh indices, because of the nature of the phasing between pressure, velocity, and unsteady heat release. This paper presents a modeling framework using the G-equation that captures the direct acoustic excitation of the flame with the effects of convective transport of wrinkles, flame displacement and flame propagation. Calculations for the Rayleigh index associated with direct excitation are shown for the first set of purely radial (0, m) and mixed radial-tangential (l, m) modes. Consistent with the results from prior phenomenological arguments, these results show that the Rayleigh index is always greater than zero for some modes – namely (0,1), (1,2) and (2,1), but others have zones of both positive and negative Rayleigh index, such as (1,1). The results also showed that the Rayleigh index decreases considerably much faster with increases in the azimuthal mode number than the radial mode number. This indicates a general tendency for flames to be relatively less unstable in higher azimuthal modes than in higher radial modes.

Acharya, Vishal S.↗

Effect of Fuel Reactivity and End- Gas Temperature on Autoignition and Flame Propagation Rate in Primary Reference Fuel Mixtures at Elevated Temperature and Pressure

Knock in spark-ignited (SI) engines is initiated by autoignition in the unburned gases upstream of spark-ignited, propagating, turbulent premixed flames. In this study, knock propensity of SI fuels was quantified via observations of end-gas autoignition (EGAI) in unburned gases upstream of laser-ignited, premixed flames at elevated pressures and temperatures in a rapid compression machine. Stoichiometric primary reference fuel (n-heptane/isooctane) blends of varying reactivity were ignited using an Nd:YAG laser over a range of compressed temperatures and pressures, all in excess of 691 K and 18.8 bar. High-speed pressure measurements and schlieren images indicated the presence of EGAI in the unburned gases upstream of spherical, outwardly propagating flames. The fraction of the total heat release attributed to EGAI was found to vary with fuel reactivity and the time-integrated temperature of the end-gas prior to ignition. Flame propagation rates, measured using schlieren imaging, did not vary strongly with fuel reactivity but were affected by turbulence caused by variation in piston timing. Under conditions of low turbulence, measured flame propagation rates agreed with one-dimensional premixed laminar flame speed computations performed at the same conditions.

Zdanowicz, Andrew↗

End-Gas Autoignition Fraction and Flame Propagation Rate in Laser-Ignited Primary Reference Fuel Mixtures at Elevated Temperature and Pressure

Engine knock in spark-ignited (SI) engines is initiated by autoignition and detonation in the unburned gases (i.e., end-gas) upstream of the spark-ignited, propagating, turbulent premixed flame. Knock propensity of fuel/air mixtures is quantified by research octane number (RON), motor octane number (MON), or methane number (MN; for gaseous fuels), which are typically measured using single-cylinder, variable compression ratio research engines. In this study, we demonstrate the ability to evaluate knock propensity of SI fuels via observations of end-gas autoignition (EGAI) in unburned gases upstream of laser-ignited, premixed flames at elevated pressures and temperatures in a rapid compression machine. Stoichiometric primary reference fuel (PRF; n-heptane/isooctane) blends of varying reactivity (50 ≤ PRF ≤ 100) were ignited using an Nd:YAG laser at five discrete temperature and pressure conditions, all in excess of 485 K and 16.75 bar. Laser ignition produced outwardly-propagating, laminar premixed flames. High-speed pressure measurements, paired with high-speed Schlieren imaging, clearly indicated the presence of EGAI. The fraction of the total heat release attributed to EGAI (e.g. EGAI fraction) varied inversely with octane number. EGAI fraction and flame propagation rate were both influenced by the magnitude of convection in the unburned gases upstream of the propagating flame caused by variation in piston timing. Experiments were accompanied by three-dimensional computational modeling with detailed chemical kinetics performed using CONVERGETM. The model results reveal low-temperature heat release and hydrogen peroxide formation in the end-gas upstream of the propagating laminar flame. Low-temperature heat release increases the temperature and degree of chain branching in the end-gas and ultimately leads to EGAI.

End-Gas Autoignition, Engine Knock, Rapid Compress↗

Effect of Fuel Reactivity and End-Gas Temperature on Autoignition and Flame Propagation Rate in Primary Reference Fuel Mixtures at Elevated Temperature and Pressure

Knock in spark-ignited (SI) engines is initiated by autoignition in the unburned gases upstream of spark-ignited, propagating, turbulent premixed flames. In this study, knock propensity of SI fuels was quantified via observations of end-gas autoignition (EGAI) in unburned gases upstream of laser-ignited, premixed flames at elevated pressures and temperatures in a rapid compression machine. Stoichiometric primary reference fuel (n-heptane/isooctane) blends of varying reactivity were ignited using an Nd:YAG laser over a range of compressed temperatures and pressures, all in excess of 691 K and 18.8 bar. High-speed pressure measurements and schlieren images indicated the presence of EGAI in the unburned gases upstream of spherical, outwardly propagating flames. The fraction of the total heat release attributed to EGAI was found to vary with fuel reactivity and the time-integrated temperature of the end-gas prior to ignition. Flame propagation rates, measured using schlieren imaging, did not vary strongly with fuel reactivity but were affected by turbulence caused by variation in piston timing. Under conditions of low turbulence, measured flame propagation rates agreed with one-dimensional premixed laminar flame speed computations performed at the same conditions.

End-Gas Autoignition, Engine Knock, Rapid Compress↗

DNS of Hydrodynamic Instabilities of Laminar H2/O2/N2 Flames at Elevated Pressure

The atypical combustion properties of hydrogen have long provided an interest for hydrogen-enriched combustion, emphasized in recent years by increasingly stringent emission regulations. Significant work has been focused on the small hydrocarbon(C1-C3)/hydrogen blends, but much less is known about the effect of hydrogen on heavier hydrocarbon combustion, of interest for the aviation and automotive industry. In this work, we perform direct numerical simulations (DNS) of spherically expanding laminar n-dodecane/H2 flames in a constant-volume vessel at elevated pressure and a range of hydrogen seeding levels. A low Mach number model is used to represent the gas and flame dynamics allowing for a temporally varying, spatially homogeneous pressure field, while also enabling numerical evolution of the system numerically at time step sizes governed by the advective CFL limit rather than acoustic processes. We use an adaptive mesh refinement (AMR) approach to tackle the large separation of scales associated with high pressure premixed flame surfaces propagating in a laboratory-scale closed domain. We incorporate detailed chemistry and transport models for the reacting flow and focus the analysis on the effects of the pressure rise on the flame propagation characteristics and morphology as the hydrogen content is increased. The presence of fast diffusive H2 and the pressure rise results in dramatic thinning of the flame and the potential onset of hydrodyanmic and theromdiffusive instabilities. We assess the potential role of these instabilities on the ability to accurately measure laminar burning speed experimentally based on the mean flame surface propagation speed.

high pressure↗

A Study of Strain Rate Effects for Turbulent Premixed Flames with Application to LES of a Gas Turbine Combustor Model

Large-scale strain rate field, a resolved quantity which is easily computable in large-eddy simulations (LES), could have profound effects on the premixed flame properties by altering the turbulent flame speed and inducing local extinction. The role of the resolved strain rate has been investigated in a posterior LES study of GE lean premixed dry low NOx emissions LM6000 gas turbine combustor model. A novel approach which is based on the coupling of the lineareddy model with a one-dimensional counter-flow solver has been applied to obtain the parameterizations of the resolved premixed flame properties in terms of the reactive progress variable, the local strain rate measure, and local Reynolds and Karlovitz numbers. The strain rate effects have been analyzed by comparing LES statistics for several models of the turbulent flame speed, i.e, with and without accounting for the local strain rate effects, with available experimental data. The sensitivity of the simulation results to the inflow velocity conditions as well as the grid resolution have been also studied. Overall, the results suggest the necessity to represent the strain rate effects accurately in order to improve LES modeling of the turbulent flame speed.

33 ADVANCED PROPULSION SYSTEMS↗

Rich methane premixed laminar flames doped by light unsaturated hydrocarbons. III. Cyclopentene

In line with the studies presented in Parts I (methane flame seeded with allene and propyne) and II (methane flame seeded with 1,3-butadiene) of this paper, the structure of a laminar rich premixed methane flame doped with cyclopentene has been investigated. The gases of this flame contain 15.3% (molar) of methane, 26.7% of oxygen, and 2.4% cyclopentene, corresponding to an overall equivalence ratio of 1.79 and a C{sub 5}H{sub 8}/CH{sub 4} ratio of 15.7%. The flame has been stabilized on a burner at a pressure of 6.7 kPa using argon as dilutant, with a gas velocity at the burner of 36 cm/s at 333 K. The measured temperature ranged from 627 K close to the burner up to 2027 K. Species quantified by gas chromatography included the usual methane C{sub 0}-C{sub 2} combustion products, but also propyne, allene, propene, propane, 1-butene, 1,3-butadiene, 1,2-butadiene, vinylacetylene, diacetylene, cyclopentadiene, 1,3-pentadiene, benzene, and toluene. A new mechanism for the oxidation of cyclopentene has been developed and added to the former model for the oxidation of small unsaturated hydrocarbons, benzene, and toluene described in Parts I and II. The whole mechanism involved 175 species in 1134 reactions. The main reaction pathways of consumption of cyclopentene and of formation of benzene and toluene are presented and discussed from flow rate analyses. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Characterization of a gas burner to simulate a propellant flame and evaluate aluminum particle combustion

This study details the characterization and implementation of a burner designed to simulate solid propellant fires. The burner was designed with the ability to introduce particles (particularly aluminum) into a gas flame. The aluminized flame conditions produced by this burner are characterized based on temperature and heat flux measurements. Using these results, flame conditions are quantified in comparison to other well-characterized reactions including hydrocarbon and propellant fires. The aluminized flame is also used to measure the burning rate of the particles. This work describes the application of this burner for re-creating small-scale propellant flame conditions and as a test platform for experiments that contribute to the development of a particle combustion model, particularly in propellant fires. (author)

42 ENGINEERING↗

Analysis of the flamelet concept in the numerical simulation of laminar partially premixed flames

The aim of this work is to analyze the application of flamelet models based on the mixture fraction variable and its dissipation rate to the numerical simulation of partially premixed flames. Although the main application of these models is the computation of turbulent flames, this work focuses on the performance of flamelet concept in laminar flame simulations removing, in this way, turbulence closure interactions. A well-known coflow methane/air laminar flame is selected. Five levels of premixing are taken into account from an equivalence ratio {phi}={infinity} (nonpremixed) to {phi}=2.464. Results obtained using the flamelet approaches are compared to data obtained from the detailed solution of the complete transport equations using primitive variables. Numerical simulations of a counterflow flame are also presented to support the discussion of the results. Special emphasis is given to the analysis of the scalar dissipation rate modeling. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

OH production by transient plasma and mechanism of flame ignition and propagation in quiescent methane-air mixtures

Transient plasma induced production of OH is followed in a quiescent, stoichiometric CH{sub 4}-air mixture using the planar laser induced fluorescence technique. Ignition and subsequent flame propagation, for both the transient plasma and traditional spark ignition, are observed with a high speed camera (2000 fps). The transient plasma is generated using a 70 ns FWHM, 60 kV, 800 mJ pulse. OH production was confirmed throughout the chamber volume; however, the mean number density was found to decay below 1.3 x 10{sup 14}cm{sup -3} near 100 {mu}s. Nonetheless, ignition induced by transient plasma was decidedly faster than by spark ignition. Using the high speed camera, ignition initiated by transient plasma was found to occur along the length of the anode at approximately 1 ms, leading to the formation of a wrinkled, cylindrically-shaped flame. Analysis of the flame front propagation rates shows that flames ignited by transient plasma propagate essentially at the speed consistent with well accepted literature values for the stoichiometric methane-air mixture. This supports the notion that residue plasma, if any, has little effect on flame propagation. (author)

33 ADVANCED PROPULSION SYSTEMS↗

Experimental study of Markstein number effects on laminar flamelet velocity in turbulent premixed flames

Effects of turbulent flame stretch on mean local laminar burning velocity of flamelets, u{sub n}, were investigated experimentally in an explosion vessel at normal temperature and pressure. In this context, the wrinkling, A{sub t}/A{sub l}, and the burning velocity, u{sub t}, of turbulent flames were measured simultaneously. With the flamelet assumption the mean local laminar burning velocity of flamelets, u{sub n}=u{sub t} x (A{sub t}/A{sub l}){sup -1}, was calculated for different turbulence intensities. The results were compared to the influence of stretch on spherically expanding laminar flames. For spherically expanding laminar flames the stretched laminar burning velocity, u{sub n}, varied linearly with the Karlovitz stretch factor, yielding Markstein numbers that depend on the mixture composition. Six different mixtures with positive and negative Markstein numbers were investigated. The measurements of the mean local laminar burning velocity of turbulent flamelets were used to derive an efficiency parameter, I, which reflects the impact of the Markstein number and turbulent flame stretch - expressed by the turbulent Karlovitz stretch factor - on the local laminar burning velocity of flamelets. The results showed that the efficiency is reduced with increasing turbulence intensity and the reduction can be correlated to unsteady effects. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Reconstruction of soot temperature and volume fraction profiles of an asymmetric flame using stereoscopic tomography

The present study attempts to reconstruct soot temperature and volume fraction distributions for the asymmetric diffusive flame using a tomography technique. A high-resolution camera equipped with a stereo adapter was employed to capture stereoscopic flame images, which were used to obtain monochromatic line-of-sight flame emission projections within the visible range. A matrix-decomposition-based least squares algorithm was introduced to reconstruct the emission intensity distributions in the flame sections. The retrieved intensities were used to infer local soot temperature and volume fraction. Numerical assessments show that for soot volume fraction measurement, the system signal-to-noise ratio should be larger than 62.5 dB. The proposed tomography system was found to be capable of symmetric and asymmetric flame measurements. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

On the influence of singlet oxygen molecules on the speed of flame propagation in methane-air mixture

The effect of the presence of singlet oxygen molecules O{sub 2}(a{sup 1}{delta}{sub g}) in a CH{sub 4}-air mixture on the speed of laminar flame propagation is considered. The known experimental data on the laminar flame speed and ignition delay are used to validate the developed kinetic model involving electronically excited oxygen molecules O{sub 2}(a{sup 1}{delta}{sub g}) and O{sub 2}(b{sup 1}{sigma}{sub g}{sup +}). Numerical simulation shows that the presence of 10% O{sub 2}(a{sup 1}{delta}{sub g}) in molecular oxygen enables to increase significantly (by a factor of 1.7) the speed of flame propagation in a fuel-lean ({phi}=0.45) methane-air mixture. The main reason for such an acceleration of flame propagation is the intensification of chain reactions due to addition of singlet delta oxygen molecules. For a fuel-rich mixture ({phi}=1.9), the growth in the flame speed is significantly smaller and attains a factor of 1.4. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗