Search NASA⌕ Search

SEARCH · Search NASA

Results for “Formal analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29

Analysis of redox additive-based overcharge protection for rechargeable lithium batteries

The overcharge condition in secondary lithium batteries employing redox additives for overcharge protection, has been theoretically analyzed in terms of a finite linear diffusion model. The analysis leads to expressions relating the steady-state overcharge current density and cell voltage to the concentration, diffusion coefficient, standard reduction potential of the redox couple, and interelectrode distance. The model permits the estimation of the maximum permissible overcharge rate for any chosen set of system conditions. Digital simulation of the overcharge experiment leads to numerical representation of the potential transients, and estimate of the influence of diffusion coefficient and interelectrode distance on the transient attainment of the steady state during overcharge. The model has been experimentally verified using 1,1-prime-dimethyl ferrocene as a redox additive. The analysis of the experimental results in terms of the theory allows the calculation of the diffusion coefficient and the formal potential of the redox couple. The model and the theoretical results may be exploited in the design and optimization of overcharge protection by the redox additive approach.

Narayanan, S. R.↗

Comparative Modeling Studies of Boreal Water and Carbon Balance

The coordination of the modeling and field efforts for an Intensive Field Campaign (IFC) may resemble the chicken and egg dilemma. This session's theme advocates that early and proactive involvement by modeling teams can produce a scientific and operational benefit for the IFC and Experiment. This talk will provide some examples and suggestions originating from the NASA funded IFC's of the FIFE First ISLSCP (International Satellite Land Surface Climatology Project) Field Experiment, Oregon Transect Ecosystem Research (OTTER) and predominately Boreal Ecosystem-Atmosphere Study (BOREAS) Experiments. In February 1994 and prior to the final selection of the BOREAS study sites, a group of funded BOREAS investigators agreed to run their models with data for five community types representing the proposed tower flux sites. All participating models were given identical initial values and boundary conditions and driven with identical climate data. The objectives of the intercomparison exercise were: 1) compare simulation results of participating terrestrial, hydrological, and atmospheric models over selected time frames; 2) learn about model behavior and sensitivity to estimated boreal site and vegetation definitions; 3) prioritize BOREAS field data collection efforts supporting modeling studies; 4) identify individual model deficiencies as early as possible. Out of these objectives evolved some important coordination and science issues for the BOREAS Experiment that can be generalized to IFCs and long term archiving of the data. Some problems are acceptable because they are endemic to maintaining fair and open competition prior to the peer review process. Others are logistical and addressable through application of planning, management, and information sciences. This investigator has identified one source of measurement and model incompatibility that is manifest in the IFC scaling approach. Although intuitively obvious, scaling problems are already more formally defined in the Geography literature. An example of the scaling problem will be demonstrated with Vegetation/Ecosystem Mapping and Analysis Project (VEMAP) and OTTER data.

Coughlan, J.↗

Interactive Planetary Visualization and Analysis with NASA's Solar System Treks Portals

NASA's Solar System Trek online portals provide web-based suites of interactive visualization and analysis tools enabling mission planners, planetary scientists, students, and the general public to explore planetary surfaces as seen through the eyes of many different instruments aboard a wide range of spacecraft. The portals present a vast collection of mapped data products from past and current missions for a growing number of planetary bodies. As web-based toolsets, the portals do not require users to purchase or install any software beyond current web browsers. The interactive and immersive capabilities of these portals are being used for site selection and analysis by NASA and a number of its international partners, supporting upcoming missions. They are also being used by formal and informal educators, students from elementary through university levels of study, and members of the public who are engaged in the excitement of solar system exploration. This presentation will provide an overview of the Solar System Treks and highlight many of the exciting new additions to the project implemented this past year.

Treks↗

SafeDNN: Understanding and Verifying Neural Networks

The SafeDNN project at NASA Ames explores analysis techniques and tools to ensure that systems that use Deep Neural Networks (DNN) are safe, robust and interpretable. Research directions we are pursuing include: symbolic execution for DNN analysis, label-guided clustering to automatically identify input regions that are robust, parallel and compositional approaches to improve formal SMT-based verification, property inference and automated program repair for DNNs, adversarial training and detection, probabilistic reasoning for DNNs. In this talk I will highlight some of the research advances from SafeDNN, that were already published.

Corina Pasareanu↗

Trend Detection of Atmospheric Time Series: Incorporating Appropriate Uncertainty Estimates and Handling Extreme Events

This paper is aimed at atmospheric scientists without formal training in statistical theory. Its goal is to, 1) provide a critical review of the rationale for trend analysis of the time series typically encountered in the field of atmospheric chemistry; 2) describe a range of trend-detection methods; and 3) demonstrate effective means of conveying the results to a general audience. Trend detections in atmospheric chemical composition data are often challenged by a variety of sources of uncertainty, which often behave differently to other environmental phenomena such as temperature, precipitation rate, or stream flow, and may require specific methods depending on the science questions to be addressed. Some sources of uncertainty can be explicitly included in the model specification, such as autocorrelation and seasonality, but some inherent uncertainties are difficult to quantify, such as data heterogeneity and measurement uncertainty due to the combined effect of short- and long-term natural variability, instrumental stability, and aggregation of data from sparse sampling frequency. Failure to account for these uncertainties might result in an inappropriate inference of the trends and their estimation errors. On the other hand, the variation in extreme events might be interesting for different scientific questions, for example, the frequency of extremely high surface ozone events and their relevance to human health. In this study we aim to, 1) review trend detection methods for addressing different levels of data complexity in different chemical species; 2) demonstrate that the incorporation of scientifically interpretable covariates can outperform pure numerical curve fitting techniques in terms of uncertainty reduction and improved predictability; 3) illustrate the study of trends based on extreme quantiles that can provide insight beyond standard mean or median based trend estimates; and 4) present an advanced method of quantifying regional trends based on the inter-site correlations of multi-site data. All demonstrations are based on time series of observed trace gases relevant to atmospheric chemistry, but the methods can be applied to other environmental data sets.

Trace gas↗

Chemical Thermodynamics and the Mathematical Integration of Reaction Kinetics

Key advances in the development of numerical methods for non-reacting compressible flows have been enabled by translating physical requirements into concrete numerical guidelines, such as the satisfaction of entropy inequalities for shock-capturing techniques [Lax, Contributions to Nonlinear Functional Analysis (1971) 603-634]. In the present work, we present nonlinear numerical analysis tools that draw from Chemical Thermodynamics , the branch of Nonequilibrium Thermodynamics that deals with chemical reactions. Through Gibbs formalism, chemical thermodynamics provides a well-known theoretical expression for the chemical equilibrium constant of a reaction in terms of reduced chemical potentials. A less-known, yet extremely valuable result, due to [Krambeck, Arch. Ration. Mech. Anal. , 38 (1970) 317], states that when this expression is implemented, mass-action kinetic models are consistent with the dynamical prescriptions of the 2nd law of thermodynamics. For fixed-temperature ordinary differential equations modeling constant-volume reacting gas mixtures, this leads to a decreasing Helmholtz free energy. If the temperature is allowed to vary in accordance with conservation of energy (1st law), this leads to the statement of increasing entropy. These nonlinear prescriptions can, and should be, used to further develop temporal integration techniques for reaction kinetics. We demonstrate that Krambeck's result holds even when the equilibrium constants are approximated from data. We prove this result by constructing the implicit free energy and the implicit entropy inherent to a given approximation. This is first done for a 5-species, 17-reaction model problem for air. With this structure established, elements of discrete entropy-stability theory [Tadmor, Acta Numer. , 12 (2003) 451] are leveraged to examine the consistency of time-integration schemes with these prescriptions. Using chemical potentials, one can compute the respective contributions of the kinetics model and of the temporal scheme to free energy/entropy variations. We introduce a nonlinear-stable version of the Discontinuous-Galerkin (DG) scheme in time which shows robustness improvements over the standard linearly-stable version. Most notably, the maximum timestep that can be resolved with the nonlinearly-stable variant tends to grow with polynomial order, in contrast to the linearly-stable variant. We generalize our constructions to arbitrary systems of reversible chemical reactions, ultimately showing that the compressible reacting Euler system admits the opposite of the implicitly constructed thermodynamic entropy as a mathematical entropy . This lays important theoretical foundations towards robust scheme development [Harten, J. Comput. Phys. 49 (1983) 151-164].

STMD↗

On exact-WKB analysis, resurgent structure, and quantization conditions

There are two well-known approaches to studying nonperturbative aspects of quantum mechanical systems: saddle point analysis of the partition functions in Euclidean path integral formulation and the exact-WKB analysis based on the wave functions in the Schrödinger equation. In this work, based on the quantization conditions obtained from the exact-WKB method, we determine the relations between the two formalism and in particular show how the two Stokes phenomena are connected to each other: the Stokes phenomenon leading to the ambiguous contribution of different sectors of the path integral formulation corresponds to the change of the “topology” of the Stoke curves in the exact-WKB analysis. We also clarify the equivalence of different quantization conditions including Bohr-Sommerfeld, path integral and Gutzwiller’s ones. In particular, by reorganizing the exact quantization condition, we improve Gutzwiller’s analysis in a crucial way by bion contributions (incorporating complex periodic paths) and turn it into an exact result. Furthermore, we argue the novel meaning of quasi-moduli integral and provide a relation between the Maslov index and the intersection number of Lefschetz thimbles.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Derivation and experimental verification of clock synchronization theory

The objective of this work is to validate mathematically derived clock synchronization theories and their associated algorithms through experiment. Two theories are considered, the Interactive Convergence Clock Synchronization Algorithm and the Mid-Point Algorithm. Special clock circuitry was designed and built so that several operating conditions and failure modes (including malicious failures) could be tested. Both theories are shown to predict conservative upper bounds (i.e., measured values of clock skew were always less than the theory prediction). Insight gained during experimentation led to alternative derivations of the theories. These new theories accurately predict the clock system's behavior. It is found that a 100% penalty is paid to tolerate worst case failures. It is also shown that under optimal conditions (with minimum error and no failures) the clock skew can be as much as 3 clock ticks. Clock skew grows to 6 clock ticks when failures are present. Finally, it is concluded that one cannot rely solely on test procedures or theoretical analysis to predict worst case conditions. conditions.

INTERACTIVE CONVERGENCE CLOCK↗

Solar Total Energy Project (STEP) Performance Analysis of High Temperature Energy Storage Subsystem

The 1982 milestones and lessons learned; performance in 1983; a typical day's operation; collector field performance and thermal losses; and formal testing are highlighted. An initial test that involves characterizing the high temperature storage (hts) subsystem is emphasized. The primary element is on 11,000 gallon storage tank that provides energy to the steam generator during transient solar conditions or extends operating time. Overnight, thermal losses were analyzed. The length of time the system is operated at various levels of cogeneration using stored energy is reviewed.

Moore, D. M.↗

Probabilistic Round Trip Contamination Analysis of a Mars Sample Acquisition and Handling Process Using Markovian Decompositions

A method for evaluating the probability of a Viable Earth Microorganism (VEM) contaminating a sample during the sample acquisition and handling (SAH) process of a potential future Mars Sample Return mission is developed. A scenario where multiple core samples would be acquired using a rotary percussive coring tool, deployed from an arm on a MER class rover is analyzed. The analysis is conducted in a structured way by decomposing sample acquisition and handling process into a series of discrete time steps, and breaking the physical system into a set of relevant components. At each discrete time step, two key functions are defined: The probability of a VEM being released from each component, and the transport matrix, which represents the probability of VEM transport from one component to another. By defining the expected the number of VEMs on each component at the start of the sampling process, these decompositions allow the expected number of VEMs on each component at each sampling step to be represented as a Markov chain. This formalism provides a rigorous mathematical framework in which to analyze the probability of a VEM entering the sample chain, as well as making the analysis tractable by breaking the process down into small analyzable steps.

Hudson, Nicolas↗

Analysis of the two-point velocity correlations in turbulent boundary layer flows

The general objective of the present work is to explore the use of Rapid Distortion Theory (RDT) in analysis of the two-point statistics of the log-layer. RDT is applicable only to unsteady flows where the non-linear turbulence-turbulence interaction can be neglected in comparison to linear turbulence-mean interactions. Here we propose to use RDT to examine the structure of the large energy-containing scales and their interaction with the mean flow in the log-region. The contents of the work are twofold: First, two-point analysis methods will be used to derive the law-of-the-wall for the special case of zero mean pressure gradient. The basic assumptions needed are one-dimensionality in the mean flow and homogeneity of the fluctuations. It will be shown that a formal solution of the two-point correlation equation can be obtained as a power series in the von Karman constant, known to be on the order of 0.4. In the second part, a detailed analysis of the two-point correlation function in the log-layer will be given. The fundamental set of equations and a functional relation for the two-point correlation function will be derived. An asymptotic expansion procedure will be used in the log-layer to match Kolmogorov's universal range and the one-point correlations to the inviscid outer region valid for large correlation distances.

Oberlack, M.↗

Four-Coordinate Fe N 2 and Imido Complexes Supported by a Hemilabile NNC Heteroscorpionate Ligand

Inspired by mechanistic proposals for N 2 reduction at the nitrogenase FeMo cofactor, we report herein a new, strongly σ-donating heteroscorpionate ligand featuring two weak-field pyrazoles and an alkyl donor. This ligand supports four-coordinate Fe(I)-N 2 , Fe(II)-Cl, and Fe(III)-imido complexes, which we have characterized using a variety of spectroscopic and computational methods. Structural and quantum mechanical analysis reveal the nature of the Fe–C bonds to be essentially invariant between the complexes, with conversion between the (formally) low-valent Fe-N 2 and high-valent Fe-imido complexes mediated by pyrazole hemilability. This presents a useful strategy for substrate reduction at such low-coordinate centers and suggests a mechanism by which FeMoco might accommodate the binding of both π-acidic and π-basic nitrogenous substrates.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Emulating galaxy and peculiar velocity clustering on non-linear scales

We explore the potential of cross-correlating galaxies and peculiar velocities on non-linear scales to enhance cosmological constraints. Leveraging the ABACUSSUMMIT simulation suite and the halo occupation distribution (HOD) formalism, we trained emulator models to describe the non-linear clustering of galaxies and velocities in redshift space. Our analysis demonstrates that combining galaxy and peculiar velocity clustering provides tighter constraints on both HOD and cosmological parameters, particularly on σ8 and w0. We further applied our models to realistic mock catalogues, reproducing the expected density and peculiar velocity errors of type-Ia supernovae, Tully-Fisher and fundamental plane measurements for the combined ZTF and DESI measurements. While systematic biases arise in the HOD parameters, the cosmological constraints remain unbiased, yielding a 3.8% precision measurement on fσ 8 compared to 4.7% when using galaxy clustering alone. We demonstrate that while combining tracers with realistic velocity measurements still yields an improvement, the gains are diminished, highlighting the need for further efforts to reduce velocity measurement uncertainties and correct observational systematics on small scales.

79 ASTRONOMY AND ASTROPHYSICS↗

Theory of viscous transonic flow over airfoils at high Reynolds number

This paper considers viscous flows with unseparated turbulent boundary layers over two-dimensional airfoils at transonic speeds. Conventional theoretical methods are based on boundary layer formulations which do not account for the effect of the curved wake and static pressure variations across the boundary layer in the trailing edge region. In this investigation an extended viscous theory is developed that accounts for both effects. The theory is based on a rational analysis of the strong turbulent interaction at airfoil trailing edges. The method of matched asymptotic expansions is employed to develop formal series solutions of the full Reynolds equations in the limit of Reynolds numbers tending to infinity. Procedures are developed for combining the local trailing edge solution with numerical methods for solving the full potential flow and boundary layer equations. Theoretical results indicate that conventional boundary layer methods account for only about 50% of the viscous effect on lift, the remaining contribution arising from wake curvature and normal pressure gradient effects.

Melnik, R. E.↗

Gear optimization

The use of formal numerical optimization methods for the design of gears is investigated. To achieve this, computer codes were developed for the analysis of spur gears and spiral bevel gears. These codes calculate the life, dynamic load, bending strength, surface durability, gear weight and size, and various geometric parameters. It is necessary to calculate all such important responses because they all represent competing requirements in the design process. The codes developed here were written in subroutine form and coupled to the COPES/ADS general purpose optimization program. This code allows the user to define the optimization problem at the time of program execution. Typical design variables include face width, number of teeth and diametral pitch. The user is free to choose any calculated response as the design objective to minimize or maximize and may impose lower and upper bounds on any calculated responses. Typical examples include life maximization with limits on dynamic load, stress, weight, etc. or minimization of weight subject to limits on life, dynamic load, etc. The research codes were written in modular form for easy expansion and so that they could be combined to create a multiple reduction optimization capability in future.

Vanderplaats, G. N.↗

Exit Presentation

Skills Acquired: Tensile Testing: Prepare materials and setting up the tensile tests; Collect and interpret (messy) data. Outgassing Testing: Understand TML (Total Mass Loss) and CVCM (Collected Volatile Condensable Material); Collaboration with other NASA centers. Z2 (NASA's Prototype Space Suit Development) Support: Hands on building mockups of components; Analyze data; Work with others, understanding what both parties need in order to make a run successful. LCVG (Liquid Cooling and Ventilation Garment) Flush and Purge Console: Both formal design and design review process; How to determine which components to use - flow calculations, pressure ratings, size, etc.; Hazard Analysis; How to make design tradeoffs.

Melone, Kate↗

A Flight Rule Checker for the LADEE Lunar Spacecraft

As part of the design of a space mission, an important part is the design of so-called flight rules. Flight rules express constraints on various parts and processes of the mission, that if followed, will reduce the risk of failure. One such set of flight rules constrain the format of command sequences regularly (e.g. daily) sent to the spacecraft to con-trol its next near term behavior. We present a high-level view of the automated flight rule checker FRC for checking command sequences sent to NASA’s LADEE Lunar mission spacecraft, used throughout its entire mission. A command sequence is in this case essentially a program (a sequence of commands) with no loops or conditionals, and it can there-fore be verified with a trace analysis tool. FRC is implemented using the TraceContract runtime verification tool, an internal Scala DSL for checking event sequences against “formal specifications”. The paper illustrates this untraditional use of runtime verification in a real con-text, with strong demands on the expressiveness and flexibility of the specification language, illustrating the advantages of an internal DSL.

LADEE↗

A Flight Rule Checker for the LADEE Lunar Spacecraft

As part of the design of a space mission, an important part is the design of so-called flight rules. Flight rules express constraints on various parts and processes of the mission, that if followed, will reduce the risk of failure. One such set of flight rules constrain the format of command sequences regularly (e.g. daily) sent to the spacecraft to con- trol its next near term behavior. We present a high-level view of the automated flight rule checker Frc for checking command sequences sent to NASA’s LADEE Lunar mission spacecraft, used throughout its entire mission. A command sequence is in this case essentially a program (a sequence of commands) with no loops or conditionals, and it can there- fore be verified with a trace analysis tool. Frc is implemented using the TraceContract runtime verification tool, an internal Scala DSL for checking event sequences against “formal specifications”. The paper illustrates this untraditional use of runtime verification in a real con- text, with strong demands on the expressiveness and flexibility of the specification language, illustrating the advantages of an internal DSL.

Kurklu, Elif↗