Search NASA⌕ Search

SEARCH · Search NASA

Results for “GARNETS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29

Theoretical prediction of phase relationships in planetary mantles

Thermodynamic and phase equilibrium data are used to generate an internally consistent set of enthalpies and entropies for important components of the CaO-MgO-Al2O3-SiO2 (CMAS) system in silica-undersaturated compositions. The addition of Na and Fe(2+) to the CMAS system produces shifts in the plagioclase, spinel and garnet stability fields. While the Morgan and Anders (1979) model Martian composition has stability fields of plagioclase and garnet lherzolite, and a small spinel lherzolite field at temperatures below 900 C, the Martian mantle composition of McGetchin and Smyth (1978) would not contain orthopyroxene, and a low pressure assemblage of plagioclase-spinel wehrlite would be replaced by garnet-spinel wehrlite at higher pressure. In both cases, the Fe-Mg ratio would be substantially greater than that found in primitive terrestrial basalts.

Wood, B. J.↗

P-T-t path for the Archean Pikwitonei Granulite Domain and Cross Lake Subprovince, Manitoba, Canada

The rationale was outlined for constructing pressure-temperature-time (P-T-t) paths by using U-Pb dating of garnet produced in thermobarometrically sensitive reactions. In an example from the Pikwitonei granulites of the Northwestern Superior Province of the Canadian Shield, garnets were formed at 2744-2742 Ma, 2700-2689 Ma, and 2605-2590 Ma, the latter events coinciding with times recorded by U-Pb zircon systems. Garnet grew during metamorphism at 6.5 kbar, 630 to 750 C and later at 7.2 to 7.5 kbar, 800 C; the later metamorphism apparently did not exceed the U-Pb closure temperature. The resultant P-T-t path is counterclockwise, with late isobaric cooling, interpreted to result from magmatic heating at an Andean margin.

Mezger, K.↗

The high temperature creep behavior of oxides and oxide fibers

A thorough review of the literature was conducted on the high-temperature creep behavior of single and polycrystalline oxides which potentially could serve as fiber reinforcements in ceramics or metal matrix applications. Sapphire when oriented with the basal plane perpendicular to the fiber axis (c-axis oriented) is highly creep resistant at temperatures in excess of 1600 C and applied loads of 100 MPa and higher. Pyramidal slip is preferentially activated in sapphire under these conditions and steady-state creep rates in the range of 10(exp -7) to 10 (exp -8)/s were reported. Data on the creep resistance of polycrystalline beryllia suggest that C-axiz oriented single crystal beryllia may be a viable candidate as a fiber reinforcement material; however, the issure of fabricability and moisture sensitivity must be addressed for this material. Yttrium aluminum garnet (YAG) also appears to be a fiber candidate material having a high resistance to creep which is due to it's complex crystal structure and high Peierl resistance. The high creep resistance of garnet suggests that there may be other complex ternary oxides such as single crystal mullite which may also be candidate materials for fiber reinforcements. Finally, CVD and single crystal SiC, although not oxides, do possess a high resistance to creep in the temperature range between 1550 and 1850 C and under stresses of 110 to 220 MPa. From a review of the literature, it appears that for high creep resistant applications sapphire, silicon carbide, yttrium aluminum garnet, mullite, and beryllia are desirable candidate materials which require further investigation.

Jones, Linda E.↗

Viscoelastic responses of a hard transition zone - Effects on postglacial uplifts and rotational signatures

A five-layer viscoelastic spherical model is used to calculate the transient displacements of postglacial rebound, the induced polar motions, and the temporal variations of the geopotential up to degree 8 of the zonal coefficients. Two models - one with two viscoelastic layers separated at 670 km, and the other with three layers in which a hard garnet layer lies between the upper and lower mantle - are compared. Forward modeling shows that it may be possible to discern the presence of a hard garnet layer with a viscosity of at least ten times greater than the upper mantle, on the basis of uplift data near the center of the former Laurentide ice-sheet and from polar wander and j2 data. Temporal variations of higher gravity harmonics, such as j6 and j8, can potentially place even tighter constraints on the rheological properties of the hard transition zone. A lower mantle viscosity between 2 and 4 x 10 to the 22nd Pa is generally preferred in models with a garnet layer which may be as large as 50 times more viscous than the upper mantle.

Spada, Giorgio↗

Thermobarometric studies on the Levack Gneisses: Footwall rocks to the Sudbury Igneous Complex

Granulite and amphibolite facies gneisses and migmatites of the Levack Gneiss Complex occupy a zone up to 8 km wide around the northern part of the Sudbury Igneous Complex (SIC). Orthopyroxene- and garnet-bearing tonalitic and semipelitic assemblages of granulite facies grade occur within 3 km of the SIC together with lenses of mafic and pyroxenitic rock compositions normally represented by an amphibole +/- cpx-rich assemblage; amphibolite facies assemblages dominate elsewhere in this terrain. These 2.711-Ga gneisses were introduced by (1) the Cartier Granite Batholith during late Archaean to early Proterozoic time and (2) the SIC, at 1.85 Ga, which produced a contact aureole 1-1.5 km wide in which pyroxene hornfelses are common within 200-300 m of the contact. A suite of 12 samples including both the opx-gt and amphibole-rich rock compositions have been studied. Garnets in the semipelitic gneisses are variably replaced by a plg-bio assemblage. Thermobarometric calculations using a variety of barometers and thermometers reported in the literature suggest that the granulite facies assemblages formed at depths in the 21-28 km range (6-8 kbar). Textures and mineral chemistry in the garnet-bearing semipelitic rocks indicate that this terrain underwent a second metamorphic event during uplift to depth in the 5-11 km range (2-3 kbar) and at temperatures as low as 500-550 C. This latter event is distinct from thermal recrystallization caused by the emplacement of the SIC; it probably represents metamorphism attributable to intrusion of the Cartier Granite Batholith. These data allow two interpretations for the crustal uplift of the Levack Gneisses: (1) The gneisses were tectonically uplifted prior to the Sudbury Event (due to intrusion of the Cartier Batholith); or (2) the gneisses were raised to epizonal levels as a result of meteorite impact at 1.85 Ga.

James, R. S.↗

Rare Earth Doped High Temperature Ceramic Selective Emitters

As a result of their electron structure, rare earth ions in crystals at high temperature emit radiation in several narrow bands rather than in a continuous blackbody manner. This study develops a spectral emittance model for films of rare earth containing materials. Although there are several possible rare earth doped high temperature materials, this study was confined to rare earth aluminum garnets. Good agreement between experimental and theoretical spectral emittances was found for erbium, thulium and erbium-holmium aluminum garnets. Spectral emittances of these films are sensitive to temperature differences across the film. Emitter efficiency is also a sensitive function of temperature. For thulium aluminum garnet the efficiency is 0.38 at 1700 K but only 0.19 at 1262 K.

Chubb, Donald L.↗

Water in the Cratonic Mantle: Insights from FTIR Data on Lac De Gras Xenoliths (Slave Craton, Canada)

The mantle lithosphere beneath the cratonic part of continents is the deepest (> 200 km) and oldest (>2-3 Ga) on Earth, remaining a conundrum as to how these cratonic roots could have resisted delamination by asthenospheric convection over time. Water, or trace H incorporated in mineral defects, could be a key player in the evolution of continental lithosphere because it influences melting and rheology of the mantle. Mantle xenoliths from the Lac de Gras kimberlite in the Slave craton were analyzed by FTIR. The cratonic mantle beneath Lac de Gras is stratified with shallow (<145 km) oxidized ultradepleted peridotites and pyroxenites with evidence for carbonatitic metasomatism, underlain by reduced and less depleted peridotites metasomatized by kimberlite melts. Peridotites analyzed so far have H O contents in ppm weight of 7-100 in their olivines, 58 to 255 in their orthopyroxenes (opx), 11 to 84 in their garnet, and 139 in one clinopyroxene. A pyroxenite contains 58 ppm H2O in opx and 5 ppm H2O in its olivine and garnet. Olivine and garnet from the deep peridotites have a range of water contents extending to higher values than those from the shallow ones. The FTIR spectra of olivines from the shallow samples have more prominent Group II OH bands compared to the olivines from the deep samples, consistent with a more oxidized mantle environment. The range of olivine water content is similar to that observed in Kaapvaal craton peridotites at the same depths (129-184 km) but does not extend to as high values as those from Udachnaya (Siberian craton). The Slave, Kaapvaal and Siberian cratons will be compared in terms of water content distribution, controls and role in cratonic root longevity.

Peslier, Anne H.↗

The Effect of Ca–Zr mole ratio on preparation, structural and magnetic properties of Ca–Zr doped Bi-YIG

Graphical abstract: - Highlights: • Ca–Zr substituted Bi-YIG has been prepared via mechanochemical processing and heat treatment. • Structural and magnetic properties were investigated. • Magnetic measurements showed the Ferrimagnetic behavior for pure garnet structure samples. • The spherical morphology of the nanoparticles was found from the SEM micrograph. - Abstract: Ca–Zr substituted (Bi-YIG) nanopowders with a nominal composition of BiY{sub 2−x}Ca{sub x}Zr{sub y}Fe{sub 5−y}O{sub 12} (x = y and x varied from 0.00 to 1.25 by the step of 0.25) were prepared by mechanochemical processing (MCP) and subsequent heat treatments. The effect of dopant mol ratios, on garnet phase formation were investigated by X-ray diffraction (XRD) and Fourier transform infrared (FT-IR) spectroscopy. The lattice constant of the samples increased by increasing Zr{sup 4+} content (for x ≤ 1). Mean crystallite size of the single-phase powders, which was evaluated by Scherrer's formula, was about 35 nm. The experimental results show that the Ca–Zr substitution Bi-YIG lowers the calcining and sintering temperatures for x < 1. The results show that the single-phase nanopowders can be obtained at temperatures below 850 °C. The measurements of vibrating sample magnetometer (VSM) show that the saturation magnetization of the samples increases as x increase from 0.00 to 0.25 and then decreases by increasing x to the values greater than 0.25.

36 MATERIALS SCIENCE↗

Electric control of magnetization relaxation in thin film magnetic insulators.

Control of magnetization relaxation in magnetic insulators via interfacial spin scattering is demonstrated. The experiments use nanometer-thick yttrium iron garnet (YIG)/Pt layered structures, with the Pt layer biased by an electric voltage. The bias voltage produces a spin current across the Pt thickness. As this current scatters off the YIG surface, it exerts a torque on the YIG surface spins. This torque can reduce or enhance the damping and thereby decrease or increase the ferromagnetic resonance linewidth of the YIG film, depending on the field/current configuration.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Magnetic spectra and Richter aftereffect relaxation in Ce{sub x}Y{sub 3−x}Fe{sub 5}O{sub 12} ferrites

The static and dynamic magnetic properties of cerium (Ce) doped yttrium iron garnet Ce{sub x}Y{sub 3−x}Fe{sub 5}O{sub 12} (x=0, 0.05, 0.1, 0.15, 0.2) ferrites (YIG) have been reported in this work. The ferrites were fabricated by the traditional solid-state reaction method. All ferrite samples reveal pure garnet structure identified by x-ray diffraction (XRD). The substitution of cerium not only enhances the saturation magnetization of the samples, but also regulates the magnetocrystalline anisotropy constant K{sub 1}. Obvious differences in permeability spectra over a frequency of 1 MHz - 1 GHz can be observed. It is verified that the permeability dispersion and magnetic losses of Ce-doped YIG ferrite contain the contribution of Richter aftereffect relaxation due to the existence of Fe{sup 2+} ions. The fitting results of the permeability spectra applied three-mechanism model is in good agreement with experimental data, which successfully explains the mechanisms of magnetic losses observed at 1 MHz to 1 GHz for Ce-doped YIG ferrite. In addition, the frequency shift of Richter aftereffect has also been discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Ferromagnetic resonance of a YIG film in the low frequency regime

An improved method for characterizing the magnetic anisotropy of films with cubic symmetry is described and is applied to an yttrium iron garnet (111) film. Analysis of the ferromagnetic resonance (FMR) spectra performed both in-plane and out-of-plane from 0.7 to 8 GHz yielded the magnetic anisotropy constants as well as the saturation magnetization. The field at which FMR is observed turns out to be quite sensitive to anisotropy constants (by more than a factor ten) in the low frequency (<2 GHz) regime, and when the orientation of the magnetic field is nearly normal to the sample plane; the restoring force on the magnetization arising from the magnetocrystalline anisotropy fields is then comparable to that from the external field, thereby allowing the anisotropy constants to be determined with greater accuracy. In this region, unusual dynamical behaviors are observed such as multiple resonances and a switching of FMR resonance with only a 1° change in field orientation at 0.7 GHz.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

One-dimensional magnetophotonic crystals with magnetooptical double layers

One-dimensional magnetophotonic microcavity crystals with nongarnet dielectric mirrors are created and investigated. The defect layers in the magnetophotonic crystals are represented by two bismuth-substituted yttrium iron garnet Bi:YIG layers with various bismuth contents in order to achieve a high magnetooptical response of the crystals. The parameters of the magnetophotonic crystal layers are optimized by numerical solution of the Maxwell equations by the transfer matrix method to achieve high values of Faraday rotation angle Θ{sub F} and magnetooptical Q factor. The calculated and experimental data agree well with each other. The maximum values of Θ{sub F} =–20.6°, Q = 8.1° at a gain t = 16 are obtained for magnetophotonic crystals with m = 7 pairs of layers in Bragg mirrors, and the parameters obtained for crystals with m = 4 and t = 8.5 are Θ{sub F} =–12.5° and Q = 14.3°. It is shown that, together with all-garnet and multimicrocavities magnetophotonic crystals, such structures have high magnetooptical characteristics.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Microwave-Hydrothermal Synthesis of Y{sub 3}Fe{sub 5}O{sub 12} Nanoparticles: Sintering Temperature Effect on Structural, Magnetic and Dielectric Properties

Herein, we report a facile microwave-assisted hydrothermal method for the preparation of yttrium iron garnet (YIG, Y{sub 3}Fe{sub 5}O{sub 12})nanocrystals and realized the synergy between its structural and magnetic properties. The as-prepared powder thermal stability was characterized in detail by using thermogravimetric-differential thermal analysis (TG-DTA). The synthesized powder was microwave sintered at six different temperatures ranging from 973 to 1373 K for 60 min and characterized using X-ray diffraction (XRD) and field emission scanning electron microscopy (FESEM). Magnetic properties were investigated by vibrating-sample magnetometer (VSM) and ferromagnetic resonance (FMR) studies. The frequency variation of dielectric and magnetic properties was measured in the frequency range of 100 kHz–1.8 GHz. The observed magnetic and dielectric parameters such as saturation magnetization, coercivity, permeability, linewidth, dielectric constant and magnetodielectric losses are strongly affected by sintering temperature. The saturation magnetization and coercivity of YIG were found in the range 14.4–28.0 emu/g and 35–87 Oe, respectively. Furthermore, the FMR linewidth decreases from 844 to 204 Oe. This analysis undoubtedly demonstrates that the synthesis method and sintering temperature have the prominent effect on the electrical and magnetic properties of YIG and would be very useful for the garnet-based microwave device applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Interconnected cathode-electrolyte double-layer enabling continuous Li-ion conduction throughout solid-state Li-S battery

All-solid-state lithium (Li) batteries with high energy density are a promising solution for the next-generation energy storage systems in large-scale devices. To simultaneously overcome the challenges of poor ionic conduction of solid electrolytes and shuttling of active materials, here we introduce a functional electrolyte-cathode bilayer framework with interconnected LLAZO channels from the electrolyte into the cathode for advanced solid-state Li-S batteries. Differing from the traditional solid-state batteries with separated layer compositions, the introduced bilayer framework provides ultrafast and continuous ion/electron conduction. Instead of transferring Li+ across the polymer and garnet phases which involve huge interfacial resistance, Li+ is directly conducted through the LLAZO channels created continuously from the cathode layer to the solid electrolyte layer, significantly shortening the diffusion distance and facilitating the redox reaction of sulfur and sulfides. A stable cycle life is demonstrated in the prototype Li-S solid-state batteries assembled with the introduced LLAZO-LLAZO@CNF interconnected bilayer framework. High capacity is obtained at room temperature, indicating the superior electrochemical properties of the bilayer framework that result from the unique design of the interconnected LLAZO garnet phase.

25 ENERGY STORAGE↗

Magnetic resonance in bilayers of ferrite and functionally graded piezoelectric

Highlights: • Ferromagnetic resonance in a ferrite-piezoelectric laminate is studied. • An electric field induced FMR line broadening results from bending the sample. • Ferrite layer between the two piezoelectric layers shows a large line broadening. - Abstract: The particular purpose of this paper is theoretical modeling of magnetoelectric interactions at the ferromagnetic resonance in a layered structure of a ferrite and a piezoelectric with through-thickness graded polarization. We show that using the functionally graded piezoelectric with through-thickness variation of polarization can lead to an electric field induced broadening of ferromagnetic resonance line. As an example, we consider the laminate based on the yttrium iron garnet layer which is placed between two lead zirconate titanate layers with different poling direction. The maximal ferromagnetic resonance line broadening of 9.3 Oe is obtained for the yttrium iron garnet to lead zirconate titanate layer thickness ratio of 1.7 at 9.3 GHz for E equal to 10 kV/cm.

36 MATERIALS SCIENCE↗

A Mg2+-Ge4+ substituting strategy for optimizing color rendering index and luminescence of YAG: Ce3+ phosphors for white LEDs

Highlights: • Mg{sup 2+}-Ge{sup 4+} ion pairs can partially substitute the Al{sup 3+} ions of YAG successfully. With the substitution, the garnet crystal structure remains unchanged. • With increasing Mg{sup 2+}-Ge{sup 4+} ions concentrations, the emission spectra show a progressive red-shift, from 528 to 552 nm (about 24 nm). • In white LEDs, with increasing Mg{sup 2+}-Ge{sup 4+} ions concentrations, the CCT decreased gradually from 6798 to 3261 K and the CRI increased from 76.5 to 89.3. - Abstract: Mg{sup 2+}-Ge{sup 4+} ions substituted YAG: Ce{sup 3+} phosphors (Y{sub 3}Al{sub 5-2x}Mg{sub x}Ge{sub x}O{sub 12}: Ce{sup 3+}) were prepared by high temperature solid state reaction method. X-ray diffraction (XRD), Scanning election microscope (SEM), Photoluminescence (PL) spectra and so on were used to characterize the samples. The effects of Mg{sup 2+}-Ge{sup 4+} concentrations on the morphology, structure, luminescence properties, fluorescence lifetime and white LED performance of YAG: Ce{sup 3+} phosphors were studied in detail. The results indicate that Mg{sup 2+}-Ge{sup 4+} ion pairs can partially substitute the Al{sup 3+} ions of YAG successfully. With the substitution, the garnet crystal structure remains unchanged. However the emission spectra show a progressive red-shift, from 528 to 552 nm (about 24 nm). The lifetime decreased rapidly from 84 to 26 ns. In particular, the correlated color temperature (CCT) decreases gradually from 6798 to 3261 K and the color rendering index (CRI) increases from 76.5 to 89.3 with the increasing of the incorporation content of Mg{sup 2+}-Ge{sup 4+} ion pairs.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structural stability of the Li-ion conductor Li7La3Zr2O12 investigated by high-pressure in-situ X-ray diffraction and Raman spectroscopy

Highlights: • Lithium ion conductor of Garnet-related-type structure Li{sub 7}La{sub 3}Zr{sub 2}O{sub 12}. • Conversion(M.E.) • High-pressure behavior of Li{sub 7}La{sub 3}Zr{sub 2}O{sub 12} is investigated up to 70 GPa. • High pressure in-situ X-ray diffraction measurements and Raman spectroscopy. • Tetragonal Li{sub 7}La{sub 3}Zr{sub 2}O{sub 12} transforms to high-pressure cubic one under high pressure. - Abstract: The high-pressure behavior of Li{sub 7}La{sub 3}Zr{sub 2}O{sub 12} (LLZO) with a garnet-related structure has been investigated for the first time by high pressure in situ X-ray diffraction measurements and Raman spectroscopy using a diamond anvil cell. It was found that the tetragonal LLZO transforms to the high-pressure cubic phase (HP-c-LLZO) at 71.8 GPa in a N{sub 2} medium and at 25.8 GPa in the absence of pressure mediums. Uniaxial compression in the absence of pressure mediums induced the phase transition at much lower pressures than in the hydrostatic case when N{sub 2} was used as the pressure medium. High pressure in situ Raman spectroscopy suggested that the Li coordination in HP-c-LLZO was different from that reported in cubic LLZO, which had been stabilized by doping Al at ambient pressure and room temperature.

36 MATERIALS SCIENCE↗

High Temperature Decomposition of Almandine and Pyrope in Reducing Atmosphere

Thermal decomposition of two garnets of near end-member composition--almandine (Fe{sub 2.85}Mg{sub 0.15})(Al{sub 1.99})Si{sub 2.99}O{sub 12} and pyrope (Mg{sub 2.22}Fe{sub 0.47}Ca{sub 0.33})(Cr{sub 0.11}Fe{sub 0.06}Al{sub 1.81})Si{sub 2.98}O{sub 12}--has been carried out in reducing atmosphere (forming gas: 10% of H{sub 2} in N{sub 2}). High-temperature behavior of both samples was monitored using simultaneous thermogravimetry and differential scanning calorimetry. The decomposition of almandine and pyrope turned out to proceed at slightly different temperatures above 1000 degree sign C. Therefore, two series of samples were prepared based on the results of thermal analysis: almandine heated up to 950 deg. C, 1070 deg. C and 1200 deg. C, and pyrope heated up to 1000 deg. C, 1100 deg. C, 1125 deg. C and 1200 deg. C. The identification of the decomposition products was performed by X-ray powder diffraction and Moessbauer spectroscopy. The common feature of the decomposition of both garnets is the presence of metallic iron and spinel phase, while the other products include fayalite, cristobalite, and cordierite for almandine; and enstatite and anorthite for pyrope. The formation of this last component was enabled due to Ca content in pyrope.

36 MATERIALS SCIENCE↗