Search NASA⌕ Search

SEARCH · Search NASA

Results for “Hall effect”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29
All sourcesNASA NTRSDOE OSTI
NASA NTRS2002

High Performance Power Module for Hall Effect Thrusters

Previous efforts to develop power electronics for Hall thruster systems have targeted the 1 to 5 kW power range and an output voltage of approximately 300 V. New Hall thrusters are being developed for higher power, higher specific impulse, and multi-mode operation. These thrusters require up to 50 kW of power and a discharge voltage in excess of 600 V. Modular power supplies can process more power with higher efficiency at the expense of complexity. A 1 kW discharge power module was designed, built and integrated with a Hall thruster. The breadboard module has a power conversion efficiency in excess of 96 percent and weighs only 0.765 kg. This module will be used to develop a kW, multi-kW, and high voltage power processors.

Pinero, Luis R.↗
DOE OSTI2021

Discrete quantum geometry and intrinsic spin Hall effect

We show that the quantum geometry of the Fermi surface can be numerically described by a three-dimensional discrete quantum manifold. This approach not only avoids singularities in the Fermi sea, but it also enables the precise computation of the intrinsic Hall conductivity resolved in spin, as well as any other local properties of the Fermi surface. The method assures numerical accuracy when the Fermi level is arbitrarily close to singularities, and it remains robust when Kramers degeneracy is protected by symmetry. Furthermore, the approach is demonstrated by calculating the anomalous Hall and spin Hall conductivities of a two-band lattice model of a Weyl semimetal and a full-band ab initio model of zinc-blende GaAs.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Itinerant ferromagnetism and intrinsic anomalous Hall effect in amorphous iron-germanium

The amorphous iron-germanium system ( a - Fe x Ge 1 - x ) lacks long-range structural order and hence lacks a significant Brillouin zone. The magnetization of a - Fe x Ge 1 - x is well explained by the Stoner model for Fe concentrations x above the onset of magnetic order around x = 0.4 , indicating that the local order of the amorphous structure preserves the spin-split density of states of the Fe- 3 d states sufficiently to polarize the electronic structure despite k being a bad quantum number. Measurements reveal an enhanced anomalous Hall resistivity ρ x y AH relative to crystalline FeGe; this ρ x y AH is compared to density-functional theory calculations of the anomalous Hall conductivity to resolve its underlying mechanisms. The intrinsic mechanism, typically understood as the Berry curvature integrated over occupied k states but shown here to be equivalent to the density of curvature integrated over occupied energies in aperiodic materials, dominates the anomalous Hall conductivity of a - Fe x Ge 1 - x ( 0.38 ≤ x ≤ 0.61 ). The density of curvature is the sum of spin-orbit correlations of local orbital states and can hence be calculated with no reference to k space. This effect and the accompanying Stoner-like model for the intrinsic anomalous Hall conductivity establish a unified understanding of the underlying physics of the anomalous Hall effect in both crystalline and disordered systems.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Revisiting excitation gaps in the fractional quantum Hall effect

Recent systematic measurements of the quantum well width dependence of the excitation gaps of fractional quantum Hall states in high mobility samples open the possibility of a better quantitative understanding of this important issue. Here we present what we believe to be accurate theoretical gaps including the effects of finite width and Landau level (LL) mixing. While theory captures the width dependence, there still remains a deviation between the calculated and the measured gaps, presumably caused by disorder. It is customary to model the experimental gaps of the n/(2n ± 1) states as Δ n/(2n+1) = Ce 2 /[(2n ± 1)ϵl]-Γ, where ϵ is the dielectric constant of the background semiconductor and l is the magnetic length; the first term is interpreted as the cyclotron energy of composite fermions and Γ as a disorder-induced broadening of composite-fermion LLs. Fitting the gaps for various fractional quantum Hall states, we find that Γ can be nonzero even in the absence of disorder.

36 MATERIALS SCIENCE↗
DOE OSTI2017

Resistivity, I–V characteristics and Hall effect in Dy{sub 0.5}(Sr{sub 1-x}Ca{sub x}){sub 0.5}MnO{sub 3} manganites

Highlights: • The resistivity of Dy{sub 0.5}(Sr{sub 1-x}Ca{sub x}){sub 0.5}MnO{sub 3} (x = 0 and x = 0.3) systems showed that these samples exhibited an insulating behavior. • I–V characteristics of both samples deviate from the Ohmic behavior. • Magnetoresistance and electroresistance provided negative values. • Hall resistivity ρxy of the Dy{sub 0.5}Sr{sub 0.5}MnO{sub 3} sample presents electron-like type of the charge carriers. • The temperature coefficient of resistance (TCR) shows that both systems can be good candidates for bolometer applications. - Abstract: Dy{sub 0.5}(Sr{sub 1-x}Ca{sub x}){sub 0.5}MnO{sub 3} (x = 0 and x = 0.3) manganites were synthesized using sol-gel method. Both samples exhibited an insulating behavior in the whole temperature range. Even the application of 5 T magnetic fields does not change this state. Conduction mechanisms were also investigated. The I–V characteristics of both samples present Ohmic behavior at minor voltages. Magnetoresistance and electroresistance were also studied. The thermal variation of Hall resistivity of Dy{sub 0.5}Sr{sub 0.5}MnO{sub 3} was determined in cooling down and warming up processes revealing electron-like type of charge carriers. Temperature coefficient of resistance shows significant values for both systems making them good candidates for bolometer applications.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Enhanced Thermal Hall Effect in Nearly Ferroelectric Insulators

In the context of recent experimental observations of an unexpectedly large thermal Hall conductivity, $κ_H$, in insulating $La_2CuO_4$ (LCO) and $SrTiO_3$ (STO), in this paper we theoretically explore conditions under which acoustic phonons can give rise to such a large $κ_H$. Both the intrinsic and extrinsic contributions to $κ_H$ are large in proportion to the dielectric constant, $ε$, and the “flexoelectric” coupling, $F$. While the intrinsic contribution is still orders of magnitude smaller than the observed effect, an extrinsic contribution proportional to the phonon mean-free path appears likely to account for the observations, at least in STO. We predict a larger intrinsic $κ_H$ in certain insulating perovskites.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS2008

Performance of a Cylindrical Hall-Effect Thruster with Magnetic Field Generated by Permanent Magnets

While Hall thrusters can operate at high efficiency at kW power levels, it is difficult to construct one that operates over a broad envelope down to 100W while maintaining an efficiency of 45- 55%. Scaling to low power while holding the main dimensionless parameters constant requires a decrease in the thruster channel size and an increase in the magnetic field strength. Increasing the magnetic field becomes technically challenging since the field can saturate the miniaturized inner components of the magnetic circuit and scaling down the magnetic circuit leaves very little room for magnetic pole pieces and heat shields. An alternative approach is to employ a cylindrical Hall thruster (CHT) geometry. Laboratory model CHTs have operated at power levels ranging from the order of 50 Watts up to 1 kW. These thrusters exhibit performance characteristics which are comparable to conventional, annular Hall thrusters of similar size. Compared to the annular Hall thruster, the CHT has a lower insulator surface area to discharge chamber volume ratio. Consequently, there is the potential for reduced wall losses in the channel of a CHT, and any reduction in wall losses should translate into lower channel heating rates and reduced erosion. This makes the CHT geometry promising for low-power applications. Recently, a CHT that uses permanent magnets to produce the magnetic field topology was tested. This thruster has the promise of reduced power consumption over previous CHT iterations that employed electromagnets. Data are presented for two purposes: to expose the effect different controllable parameters have on the discharge and to summarize performance measurements (thrust, Isp, efficiency) obtained using a thrust stand. These data are used to gain insight into the thruster's operation and to allow for quantitative comparisons between the permanent magnet CHT and the electromagnet CHT.

Polzin, Kurt A.↗
NASA NTRS2009

Performance of a Permanent-Magnet Cylindrical Hall-Effect Thruster

The performance of a low-power cylindrical Hall thruster, which more readily lends itself to miniaturization and low-power operation than a conventional (annular) Hall thruster, was measured using a planar plasma probe and a thrust stand. The field in the cylindrical thruster was produced using permanent magnets, promising a power reduction over previous cylindrical thruster iterations that employed electromagnets to generate the required magnetic field topology. Two sets of ring-shaped permanent magnets are used, and two different field configurations can be produced by reorienting the poles of one magnet relative to the other. A plasma probe measuring ion flux in the plume is used to estimate the current utilization for the two magnetic topologies. The measurements indicate that electron transport is impeded much more effectively in one configuration, implying higher thrust efficiency. Thruster performance measurements on this configuration were obtained over a power range of 70-350 W and with the cathode orifice located at three different axial positions relative to the thruster exit plane. The thrust levels over this power range were 1.25-6.5 mN, with anode efficiencies and specific impulses spanning 4-21% and 400-1950 s, respectively. The anode efficiency of the permanent-magnet thruster compares favorable with the efficiency of the electromagnet thruster when the power consumed by the electromagnets is taken into account.

Polzin, K. A.↗
DOE OSTI2015

Study of non-linear Hall effect in nitrogen-grown ZnO microstructure and the effect of H{sup +}-implantation

We report magnetotransport studies on microstructured ZnO film grown by pulsed laser deposition in N{sub 2} atmosphere on a-plane Al{sub 2}O{sub 3} substrates and the effect of low energy H{sup +}-implantation. Non-linearity has been found in the magnetic field dependent Hall resistance, which decreases with temperature. We explain this effect with a two-band model assuming the conduction through two different parallel channels having different types of charge carriers. Reduced non-linearity after H{sup +}-implantation in the grown film is due to the shallow-donor effect of hydrogen giving rise to an increment in the electron density, reducing the effect of the other channel.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
NASA NTRS1971

Hall effect study of electron irradiated Si(Li)

Measurement of the Hall coefficient as a function of temperature between 15 and 300 K allows the separate determination of donor and acceptor concentrations in silicon samples which were irradiated at 240 K by 1-MeV electrons and then thermally annealed at 300 K. In both lithium- and phosphorus-doped silicon irradiation increased the acceptor concentration and decreased the donor concentration due to the formation of vacancy donor pairs. Annealing did not change either concentration in phosphorus-doped silicon and caused both concentrations to decrease in silicon doped with moderate amounts of lithium. In addition to this, in both lithium- and phosphorus-doped silicon the concentration and energy level of the A center were measured at each point in the sample's history. This experiment was limited to float-zoned silicon doped with less than 6 x 10 to the 14th power donors per cu cm.

Stannard, J.↗
NASA NTRS1985

The Hall Effect

The experimental procedure consists of the measurement of the Hall coefficient, resistivity, and Hall mobility as a function of temperature of a sample of gallium arsenides before and after irradiation with low and high energy protons. Work has begun on the development of the theory and subsequently experiments will be designed and performed.

Source record↗