SEARCH · Search NASA

Results for “High Explosives”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29

All sources NASA NTRS DOE OSTI

DOE OSTI2025

In situ multi-tier auto-ignition detection applied to dual-fuel combustion simulations

Here we use an anomaly detection methodology that is centered on analyzing fourth-order joint moments (co-kurtosis), particularly focusing on its application in auto-ignition of combustion problems with large numbers of species. Unsupervised anomaly detection is challenging to generalize across problem types and domains. A recent technique, centered on analyzing information in the fourth-order joint moment co-kurtosis, has shown promise, especially for high-dimensional scientific data. In this work we present developments to the co-kurtosis based anomaly detection method needed to make it effective and scalable for large-scale distributed scientific data, such as those generated by massively parallel simulations. An in situ co-kurtosis algorithm is employed as the anomaly detection method for identifying ignition kernels in simulations of turbulent combustion. Here, we extend an existing methodology which identifies regions of the domain where anomalies are present, and add another tier of anomaly detection where the individual samples contributing to the anomaly are identified. We apply this algorithm on-the-fly to a variety of turbulent reacting flow problems and compare it to the widely used (but significantly more expensive) chemical explosive mode analysis (CEMA). We demonstrate the ability of the method to detect and identify the onset of low and high temperature ignition which can be used for computational steering, as chemical and combustion anomalies occur intermittently at spatio-temporal locations unknown a priori. Finally, we apply our lightweight in situ algorithm to an exascale high-fidelity simulation with a total of 2.4 Trillion degrees of freedom, performed using an adaptive mesh refinement solver. Furthermore, through a scalability analysis, we show that the relative computational cost of this in-situ anomaly detection algorithm compared to an iteration of the reacting flow solver is negligible.

97 MATHEMATICS AND COMPUTING↗

NASA NTRS2012

Earth's Most Powerful Natural Particle Accelerator

Thunderstorms launch antimatter, gamma rays, and highly energetic electrons and neutrons to the edge of space. This witches' brew of radiation is generated at the edge of the stratopause, by the strong electric fields associated with lightning discharges. In less than a quarter millisecond, an explosive feedback process takes an initial seed population of electrons, perhaps produced by cosmic rays from dying stars, and amplifies them a billion billion-fold in the rarefied air over high altitude thunderheads. The electrons generate gamma radiation as they travel through the stratosphere and lower mesosphere, momentarily brighter and of harder spectrum than cosmic gamma ray bursts. These electrons ultimately are absorbed by the atmosphere, but the gamma rays continue on, into the upper reaches of the atmosphere, where they in turn generate a new population of electrons, positrons, and energetic neutrons. These secondary electrons and positrons move along the magnetic field, and can reach near-earth space, streaming through the inner radiation belts, and possibly contributing to the trapped populations there. First postulated by Wilson in 1925, and serendipitously discovered by the Compton Gamma Ray Observatory in 1994 [Fishman et al.], these events, known as "Terrestrial Gamma ray Flashes" (TGFs), represent the most intense episodes of particle acceleration on or near the Earth, resulting in electrons with energies up to 100 MeV. Recent observations by the RHESSI [Smith et al., 2004], Fermi [Briggs et al., 2010], and AGILE [Tavani et al., 2011] satellites, and theoretical and computational modeling, have suggested that the relativistic runaway electron avalanche (RREA) mechanism [Gurevich, 1992], and important modifications, such as the relativistic feedback discharge (RFD) model [Dwyer 2012] can best explain the observations at present. In these models, strong thunderstorm electric fields drive seed electrons, generated from cosmic ray interactions, into a runaway discharge, in which the seed electrons continually gain energy from the electric field, creating a host of secondaries as they interact with the background atmospheric gas. The feedback mechanisms include backwards-propagating positrons and gamma rays, which then can generate new "seed" electrons at the base of the acceleration region, and themselves generate further avalanche chain reactions, greatly amplifying the initial seed population. All these processes happen in the stratosphere, in the altitude range near 15-20 km, where the electric fields and mean free paths are appropriate to allow the discharge to develop.

Rowland, Doug↗

NASA NTRS2015

Background-Oriented Schlieren for Large-Scale and High-Speed Aerodynamic Phenomena

Visualization of the flow field around a generic re-entry capsule in subsonic flow and shock wave visualization with cylindrical explosives have been conducted to demonstrate sensitivity and applicability of background-oriented schlieren (BOS) for field experiments. The wind tunnel experiment suggests that BOS with a fine-pixel imaging device has a density change detection sensitivity on the order of 10(sup -5) in subsonic flow. In a laboratory setup, the structure of the shock waves generated by explosives have been successfully reconstructed by a computed tomography method combined with BOS.

Mizukaki, Toshiharu↗

NASA NTRS1995

The wall of reconnection-driven magnetohydrodynamic turbulence in a large solar flare

LaRosa and Moore (1993) recently proposed that the bulk dissipation of magnetic field that is required for the electron energization in the explosive phase of solar flares occurs in a 'fat current sheet', a wall of cascading magnetohydrodynamic (MHD) turbulence sustained by highly disordered driven reconnection of opposing magnetic fields impacting at a turbulent boundary layer. Here, we use the well-observed great two-ribbon eruptive flare of 1984 April 24/25 to assess the feasibility of both (1) the standard model for the overall three-dimensional form and action of the magnetic field and (2) the turbulent reconnection wall within it. We find (1) that the morphology of this flare closely matched that of the standard model; (2) the preflare sheared core field had enough nonpotential magnetic energy to power the flare; (3) the model turbulent wall required to achieve the flare's peak dissipative power easily fit within the overall span of the flaring magnetic field; (4) this wall was thick enough to have turbulent eddies large enough (diameters approximately 10(exp 8 cm) to produce the approximately ergs energy release fragments typically observed in the explosive phase of flares; (5) the aspect ratio (thickness/vertical extent) of the turbulent reconnection wall was in the 0.1-1 range expected by (Parker 1973). We therefore conclude that the viability of our version of the standard model (i.e., having the magnetic field dissipation occur in our turbulent reconnection wall) is well confirmed by this typical great two-ribbon eruptive flare.

Moore, R. L.↗

NASA NTRS2012

Optimal Fragmentation and Dispersion of Hazardous Near-Earth Objects

The complex problem of protecting the Earth from the possibility of a catastrophic impact by a hazardous near-Earth object (NEO) has been recently reassessed in [1]. In a letter on NEOs from the White House Office of Science and Technology Policy (OSTP) to the U.S. Senate and Congress in 2010, the White House OSTP strongly recommended that NASA take the lead in conducting research activities for NEO detection, characterization, and deflection technologies. Furthermore, President Obama's new National Space Policy specifically directs NASA to "pursue capabilities, in cooperation with other departments, agencies, and commercial partners, to detect, track, catalog, and characterize NEOs to reduce the risk of harm to humans from an unexpected impact on our planet." The Planetary Defense Task Force of the NASA Advisory Council also recommended that the NASA Office of the Chief Technologist (OCT) begin efforts to investigate asteroid deflection techniques. With national interest growing in the United States, the NEO threat detection and mitigation problem was recently identified as one of NASA's Space Technology Grand Challenges. An innovative solution to NASA's NEO Impact Threat Mitigation Grand Challenge problem was developed through a NIAC Phase I study (9/16/11 - 9/15/12), and it will be further investigated for a NIAC Phase II study (9/10/12 - 9/9/14). Various NEO deflection technologies, including nuclear explosions, kinetic impactors, and slow-pull gravity tractors, have been proposed and examined during the past two decades. Still, there is no consensus on how to reliably deflect or disrupt hazardous NEOs in a timely manner. It is expected that the most probable mission scenarios will have a mission lead time much shorter than 10 years, so the use of nuclear explosives becomes the most feasible method for planetary defense. Direct intercept missions with a short warning time will result in arrival closing velocities of 10-30 kilometers per second with respect to the target asteroid. Given such a large arrival delta V requirement, a rendezvous mission to the target asteroid is infeasible with existing launch vehicles. Furthermore, state-of-the-art penetrating subsurface nuclear explosion technology limits the penetrator's impact velocity to less than approximately 300 meters per second because higher impact velocities prematurely destroy the nuclear fuzing mechanisms. Therefore, significant advances in hypervelocity nuclear interceptor/ penetrator technology must be achieved to enable a last-minute nuclear disruption mission with intercept velocities as high as 30 kilometers per second. Consequently, a HAIV (Hypervelocity Asteroid Intercept Vehicle) mission architecture (Figure 1.1), which blends a hypervelocity kinetic impactor with a subsurface nuclear explosion for optimal fragmentation and dispersion of hazardous NEOs, has been developed through a Phase I study, and it will be further developed and validated through a Phase II study.

Asteroid↗

NASA NTRS1968

Design concept for nonarcing electrical connector

Connector plug automatically minimizes arcing during mating and demating. This plug uses a high-resistivity outer sheath as an extension to the regular pin contact. It is used in atmospheres containing explosive gases, and reduces erosion at the contact surfaces where mating and demating are performed frequently.

Holmen, R. E.↗

NASA NTRS1990

Star formation in proto dwarf galaxies

The effects of the onset of star formation on the residual gas in primordial low-mass Local-Group dwarf spheroidal galaxies is studied by a series of hydrodynamical simulations. The models have concentrated on the effect of photoionization. The results indicate that photoionization in the presence of a moderate gas density gradient can eject most of the residual gas on a time scale of a few 10 to the 7th power years. High central gas density combined with inefficient star formation, however, may prevent mass ejection. The effect of supernova explosions is discussed briefly.

Noriega-Crespo, A.↗

NASA NTRS1991

National Aerospace Plane Engine Seals: High Temperature Seal Performance Evaluation

The key to the successful development of the single stage to orbit National Aerospace Plane (NASP) is the successful development of combined cycle ramjet/scramjet engines that can propel the vehicle to 17,000 mph to reach low Earth orbit. To achieve engine performance over this speed range, movable engine panels are used to tailor engine flow that require low leakage, high temperature seals around their perimeter. NASA-Lewis is developing a family of new high temperature seals to form effective barriers against leakage of extremely hot (greater than 2000 F), high pressure (up to 100 psi) flow path gases containing hydrogen and oxygen. Preventing backside leakage of these explosive gas mixtures is paramount in preventing the potential loss of the engine or the entire vehicle. Seal technology development accomplishments are described in the three main areas of concept development, test, and evaluation and analytical development.

Steinetz, Bruce M.↗

NASA NTRS1994

The peculiar type II supernova 1993J in M81: Transition to the nebular phase

We present optical spectra of the bright, peculiar Type II supernova 1993J in M81 spanning the first 14 months of its existence, revealing its transition to the nebular phase. Unlike the case in normal Type II supernovae, during the first 2-10 months the H-alpha emission line gradually becomes less prominent relative to other features such as (O I) lambda lambda 6300, 6364 and (Ca II) lambda lambda 7291, 7324, as we had predicted based on early-time (tau less than or approximately equal to 2 months) spectra. The nebular spectrum resembles those of the Type Ib/Ic supernovae 1985F and 1987M, although weak H-alpha emission is easily visible even at late times in SN 1993J. At tau = 8 months a close similarity is found with the spectrum of SN 1987K, the only other Type II supernova known to have undergone such a metamorphosis. The emission lines are considerably broader than those of normal Type II supernovae at comparable phases, consistent with the progenitor having lost a majority of its hydrogen envelope prior to exploding. Consequently, there is now little doubt that Type Ib, and probably Type Ic, supernovae result from core collapse in stripped, massive stars; models of the chemical evolution of galaxies in which these subtypes are ascribed to exploding white dwarfs must be appropriately modified. Although all of the emission lines in spectra of SN 1993J fade roughly exponentially for a considerable time, the fading of H-alpha begins to slow down at tau approximately = 8 months, and in the interval tau = 10-14 months its flux is constant, or even slightly rising in the wings of the line. This behavior, together with the box-like shape and great breadth (full width at half maximum (FWHM) approximately = 17 000 km/s) of the line profile, suggests that the H-alpha emission is being produced by the high-velocity outer layer of hydrogen ejecta interacting with circumstellar gas released by the progenitor prior to its explosion. A similar phenomenon has previously been seen at later phases in several Type II supernovae, most notably SN 1980K. Bumps (FWHM approximately = 1000 km/s, amplitude approximately = 20%) in the H-alpha profile are probably indicative of Rayleigh-Taylor instabilities in the cool gas behind the reverse shock. A very narrow component (unresolved, FWHM less than or approximately equal to 200 km/s) of H-alpha at the symmetric velocity of SN 1993J may instead be produced by a superposed H II region, or perhaps by recombination in a large circumstellar shell or ring that was ionized during the first few hours after outburst. In the near future the spectrum of SN 1993J should become increasingly dominated by broad H-alpha emission.

Filippenko, Alexei V.↗

DOE OSTI2024

Identification of Suitable Vacuum Gas Oils as Plasticizers Using HT-GC × GC-HRMS

Vacuum gas oils (VGOs) have long been heralded as effective plasticizers due to their high boiling-points and lubricating properties. One of these VGOs, HyVac Oil 93050, is a paraffinic plasticizer that is currently utilized in polymer–plasticizer explosive formulations, while this oil effectively increases the elasticity and decreases the sensitivity for current formulations. We seek to identify alternative VGOs with similar density, viscosity, molecular composition, and impurities for future formulations. In this study, 18 VGOs, including HyVac Oil 93050, were initially evaluated for their density and viscosity. The oils were then ranked based on physical characteristics and analyzed for molecular composition using high-temperature comprehensive two-dimensional gas chromatography with high-resolution time-of-flight mass spectrometry (HT-GC × GC-HRMS). Further, the HT-GC × GC-HRMS chromatograms of the top 10 most similar VGOs to HyVac Oil 93050, according to density, were compared utilizing the Pearson correlation coefficient. Three of the oils with densities similar to those of HyVac Oil 93050 had a Pearson correlation within the lot-to-lot variation of HyVac Oil 93050. For the top 3 candidates, Pearson correlation was then utilized as a feature selection technique to discover significant chemical differences. Positive chemical ionization (PCI) and negative chemical ionization (NCI) HT-GC × GC-HRMS chromatograms were also evaluated and aided in the discovery and identification of several key compounds including additives that acted as stabilizers for the VGOs. After this further chemical analysis, two of the original 17 potential VGOs were determined to be physically and chemically similar to HyVac Oil 93050.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2024

2019 Budget Request for the DOE Computational Science Graduate Fellowship (CSGF) Grant

The Department of Energy Computational Science Graduate Fellowship (DOE CSGF) is necessary to meet the continual challenging national workforce needs that arise as computational science and engineering problems continue to grow in scope and complexity. Computational science and engineering (CSE) is a multidisciplinary approach that uses scientific computing to solve practical problems methods and to supply technical tools across the scientific discovery spectrum. In particular, the DOE CSGF emphasizes high-performance computing (HPC) that enables CSE that advances science and engineering in directions important to the DOE and the economy in general. Over the past half-century, HPC has been an essential tool for DOE’s success. During this period, important missions, such as nuclear stockpile stewardship, have turned to HPC as an essential technology. Entire science disciplines, such as biology and cosmology, have been transformed through the augmentation of scientific observation via HPC. At government laboratories and in industry, DOE CSGF alumni are helping push traditional HPC boundaries while contributing to discoveries in high-energy physics, renewable energy, fusion-reactor design, additive manufacturing, nanomaterials for next-generation batteries and transistors, and turbine and advanced nuclear reactor modeling. In addition, HPC is used to address national health needs that will eventually point to cures both by helping cancer researchers manage and analyze huge troves of data, by simulating biological mechanisms, and by accelerating drug development — including continuing to rise to the challenge of pandemic-related research. A 2023 report from the ASCAC Subcommittee on American Competitiveness and Innovation to the ASCR office, “Can the United States Maintain Its Leadership in High-Performance Computing?” says of the Program, “The CSGF program provides a barometer for disciplines that will be of interest to future DOE computing.” An explosion in scientific and technological data has driven the need for increasingly sophisticated HPC to transform those data into scientific understanding. With access to more and more data and the proliferation of HPC, Machine Learning and Artificial Intelligence are experiencing a renaissance, complementing the now well-established use of computational simulation. Indeed, in its September 2020 subcommittee report on “AI/ML, Data Intensive Science and High-Performance Computing”, the DOE Advanced Scientific Computing Advisory Committee (ASCAC) explicitly called for a fellowship program to train computational and data scientists to tackle exascale and data-intensive computing challenges. This collaboration of empirical and theory-based modeling will increasingly inform federal policymakers whose decisions affect American society and future generations, and it requires highly skilled and intellectually agile computational scientists who can support the fast-moving DOE National Laboratory research environment. In fact, the DOE CSGF program has explicitly and consistently addressed this need.

97 MATHEMATICS AND COMPUTING↗

DOE OSTI2026

Revisiting the Supernova Engines in the 3C 397 and W49B Supernova Remnants

The nature of the supernova remnants (SNRs) 3C 397 and W49B has long been a subject of debate, with prior studies offering conflicting interpretations between thermonuclear and core-collapse scenarios. To help settle this debate, we present a systematic, spatially resolved, spectroscopic analysis of both remnants using XMM-Newton. By applying multicomponent thermal models, we derive key physical properties including elemental abundances, ejecta temperatures, ambient densities, and explosion energetics. We compare the inferred metal abundance ratios to a wide range of core-collapse and thermonuclear nucleosynthesis models, including new models whose explosion energies differ from the canonical value of 10 51 erg. We find that the observed Fe/Si and Ca/Si ratios in both SNRs are best matched by certain thermonuclear models. However, no model fully reproduces the complete set of observed abundance patterns. In 3C 397, high Fe enrichment and spatial abundance variations suggest interaction with a dense progenitor environment, and W49B’s composition is overall consistent with a thermonuclear origin; however, both require a low-energy (∼10 50 erg) supernova explosion. We additionally map the Fe Kα line centroid energies and find a spread, with W49B falling within the core-collapse region—highlighting both environmental complexity and the limitations of this diagnostic for supernova classification. Our results highlight the need for caution in relying on any single diagnostic or nucleosynthesis model for supernova typing, underscore the need for improved nucleosynthesis models, and motivate future high-resolution, high-throughput observations.

79 ASTRONOMY AND ASTROPHYSICS↗

NASA NTRS1987

Explosive volcanic deposits on Mars: Preliminary investigations

Two investigations were undertaken to examine possible large scale explosive volcanic deposits on Mars. The first includes an analysis of Viking Infrared Thermal Mapper (IRTM) data covering the vast deposits in the Amazonis, Memnonia, and Aeolis regions. These postulated ignimbrites have been previously mapped, and at least five high resolution nighttime IRTM data tracks cross the deposits. Preliminary analysis of the data covering Amazonis Planitia show that local features have anomalous thermal inertias but the ignimbrites as a whole do not consistently have significantly different thermal inertias from their surroundings. Preliminary photogeologic and IRTM studies of the large and small highland paterae have also begun. The purpose of IRTM studies of postulated Martian explosive volcanic deposits is to determine the physical properties of the proposed ignimbrites. If volcanic deposits are exposed at the surface, high thermal inertias, as are observed for Apollinaris Patera, should be present.

Crown, D. A.↗

NASA NTRS1979

The violent interstellar medium

Observational evidence for high-velocity and high-temperature interstellar gas is reviewed. The physical processes that characterize this gas are described, including the ionization and emissivity of coronal gas, the behavior and appearance of high-velocity shocks, and interfaces between coronal gas and cooler interstellar gas. Hydrodynamical models for the action of supernova explosions and stellar winds on the interstellar medium are examined, and recent attempts to synthesize all the processes considered into a global model for the interstellar medium are discussed.

Mccray, R.↗

NASA NTRS1991

Applying NASA's explosive seam welding

The status of an explosive seam welding process, which was developed and evaluated for a wide range of metal joining opportunities, is summarized. The process employs very small quantities of explosive in a ribbon configuration to accelerate a long-length, narrow area of sheet stock into a high-velocity, angular impact against a second sheet. At impact, the oxide films of both surface are broken up and ejected by the closing angle to allow atoms to bond through the sharing of valence electrons. This cold-working process produces joints having parent metal properties, allowing a variety of joints to be fabricated that achieve full strength of the metals employed. Successful joining was accomplished in all aluminum alloys, a wide variety of iron and steel alloys, copper, brass, titanium, tantalum, zirconium, niobium, telerium, and columbium. Safety issues were addressed and are as manageable as many currently accepted joining processes.

Bement, Laurence J.↗

NASA NTRS2007

SN 1987A after 18 Years: Mid-Infrared GEMINI and SPITZER Observations of the Remnant

We present high resolution 11.7 and 18.3 micron mid-IR images of SN 1987A obtained on day 6526 since the explosion with the Thermal-Region Camera and Spectrograph (T-ReCS) attached to the Gemini South 8m telescope. The 11.7 micron flux has increased significantly since our last observations on day 6067. The images clearly show that all the emission arises from the equatorial ring (ER). Nearly contemporaneous spectra obtained on day 6184 with the MIPS at 24 micron, on day 6130 with the IRAC in 3.6- 8 micron region, and on day 6190 with the IRS in the 12-37 micron instruments on board the Spitzer Space Telescope's show that the emission consists of thermal emission from silicate dust that condensed out in the red giant wind of the progenitor star. The dust temperature is 1662(sup +18) (sub -12) K, and the emitting dust mass is (2.6(sup +2.0 (sub -1.4)) x 10 (exp -6) M(solar). Lines of [Ne II] 12.82 micron and [Ne III] 15.56 pm are clearly present in the Spitzer spectrum, as well as a weak [Si II] 3 34.8 micron line. We also detect two lines near 26 micron which we tentatively ascribe to [Fe II] 25.99 pm and [0 IV] 25.91 micron. Comparison of the mid-IR Gemini 11.7 micron image with X-ray images obtained by Chandra, UV-optical images obtained by HST, and radio synchrotron images obtained by the ATCA show generally good correlation of the images across all wavelengths. Because of the limited resolution of the mid-IR images we cannot uniquely determine the location. or heating mechanism of the dust giving rise to the emission. The dust could be collisionally heated by the X-ray emitting plasma, providing a unique diagnostic of plasma conditions. Alternatively, the dust could be radiatively heated in the dense UV-optical knots that are overrun by the advancing supernova blast wave. In either case the dust-to-gas mass ratio in the circumstellar medium around the supernova is significantly lower than that in the general interstellar medium of the LMC, suggesting either a low condensation efficiency in the wind of the progenitor star, or the efficient destruction of the dust by the SN blast wave. Overall, we are witnessing the interaction of the SN blast wave with its surrounding medium, creating an environment that is rapidly evolving at all wavelengths. Continuous multiwavelength observations of SN 1987A such as these provide unique snapshots of the very early evolution of supernova remnants.

Bouchet, Patrice↗

NASA NTRS2008

A Model for Solar Polar Jets

We propose a model for the jetting activity that is commonly observed in the Sun's corona, especially in the open-field regions of polar coronal holes. Magnetic reconnection is the process driving the jets and a relevant magnetic configuration is the well-known null point and fan separatrix topology. The primary challenge in explaining the observations is that reconnection must occur in a short-duration energetic burst rather than quasi-continuously as is implied by the observations of long-lived structures in coronal holes, such as polar plumes, for example. The key idea underlying our model for jets is that reconnection is forbidden for an axisymmetric null-point topology. Consequently, by imposing a twisting motion that maintains the axisymmetry, magnetic stress can be built up to large levels until an ideal instability breaks the symmetry and leads to an explosive release of energy via reconnection. Using 3D MHD simulations we demonstrate that this mechanism does produce jets with high speed and mass, driven by nonlinear Alfven waves. We discuss the implications of our results for observations of the solar corona.

Pariat, E.↗

NASA NTRS2010

Si Isotopes of Brownleeite

Brownleeite is a manganese silicide, ideally stoichiometric MnSi, not previously observed in nature until its discovery within an interplanetary dust particle (IDP) that likely originated from a comet [1]. Three discrete brownleeite grains in the IDP L2055 I3 (4 microns in size, hereafter IDP I3) were identified with maximum dimensions of 100, 250 and 600 nm and fully analyzed using scanning-transmission electron microscopy (STEM) [1]. One of the grains (100 nm in size) was poikilitically enclosed by low-Fe, Mn-enriched (LIME) olivine. LIME olivine is epitaxial to the brownleeite with the brownleeite (200) parallel to the olivine c* [1]. LIME olivine is an enigmatic phase first reported from chondritic porous IDPs and some unequilibrated ordinary chondrites [ 2], that is commonly observed in chondritic-porous IDPs. Recently, LIME olivine has been also found in comet Wild-2 (Stardust) samples [3], indicating that LIME olivine is a common mineral component of comets. LIME olivine has been proposed to form as a high temperature condensate in the protosolar nebula [2]. Brownleeite grains also likely formed as high-temperature condensates either in the early Solar System or in the outflow of an evolved star or supernova explosion [1]. The isotopic composition of the brownleeite grains may strongly constrain their ultimate source. To test this hypothesis, we performed isotopic analyses of the brownleeite and the associated LIME olivine, using the NASA/JSC NanoSIMS 50L ion microprobe.

Nakamura-Messenger, K.↗