Search NASA⌕ Search

SEARCH · Search NASA

Results for “Hybrid programs”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29

Comparison of Ice Shapes on Full-Chord and Truncated Swept Wing Models

A research program was conducted to evaluate the effectiveness of icing tunnel hybrid model design. A hybrid design is where the full-scale leading edge of a wing section is maintained only to a certain percentage of the local chord, while the aft section of the model is redesigned into a shortened or truncated planform. Ice shape geometries on a full-chord length and hybrid versions of the swept CRM65 wing model were obtained in NASA Icing Research Tunnel and compared. For most test conditions, the overall size and shape of the ice shapes compared well. On the main part of the ice shape, the hybrid model had larger chordwise extent, resulting in wider ice shape. For the scallop ice shapes, the ice shape heights at attachment line location were identical. For conditions that produced rime shape, hybrid model ice shapes were larger overall, even at the attachment line location. The only location where there was more ice on the full chord model was on the lower surface, downstream of where the hybrid model no longer had full-scale leading edge. For the test conditions where ice mass measurements were acquired for both models, the full-chord models had 11-22% less ice mass than on the hybrid wing. These differences were larger and opposite of those predicted from LEWICE 3D ice prediction calculations. Further investigation is needed in order determine the cause of the differences between the full-chord and hybrid models.

Icing↗

Comparison of Ice Shapes on Full-Chord and Truncated Swept Wing Models

A research program was conducted to evaluate the effectiveness of icing tunnel hybrid model design. A hybrid design is where the full-scale leading edge of a wing section is maintained only to a certain percentage of the local chord, while the aft section of the model is redesigned into a shortened or truncated planform. Ice shape geometries on a full-chord length and hybrid versions of the swept CRM65 wing model were obtained in NASA Icing Research Tunnel and compared. For most test conditions, the overall size and shape of the ice shapes compared well. On the main part of the ice shape, the hybrid model had larger chordwise extent, resulting in wider ice shape. For the scallop ice shapes, the ice shape heights at attachment line location were identical. For conditions that produced rime shape, hybrid model ice shapes were larger overall, even at the attachment line location. The only location where there was more ice on the full chord model was on the lower surface, downstream of where the hybrid model no longer had full-scale leading edge. For the test conditions where ice mass measurements were acquired for both models, the full-chord models had 11-22% less ice mass than on the hybrid wing. These differences were larger and opposite of those predicted from LEWICE 3D ice prediction calculations. Further investigation is needed in order determine the cause of the differences between the full-chord and hybrid models.

Icing↗

Additional Comparison of Ice Shapes on Full-Chord and Truncated Swept Wing Models from January 2022

A research program was conducted to evaluate the effectiveness of icing tunnel hybrid model design. A hybrid design is where the full-scale leading edge of a wing section is maintained only to a certain percentage of the local chord, while the aft section of the model is redesigned into a shortened or truncated planform. An initial study was conducted in 2020 where the ice shape geometries on a full-chord length version of the swept CRM65 wing model were compared to those from the hybrid version of CRM65 that were obtained in the NASA Icing Research Tunnel in 2015. The results were reported in a 2021 paper. For most test conditions, the overall size and shape of the ice shapes compared well. However, the ice shapes from the full-chord model were generally slightly smaller than those from the hybrid model. A follow-on test was conducted in 2022 and obtained ice shapes on both full-chord and hybrid wing models during the same test campaign to eliminate the differences in the tunnel spray nozzle configuration and calibration as a cause for the differences observed during the previous investigation. The ice shapes obtained on the full-chord model compared much better to those obtained on the hybrid model during the 2022 test, with nearly identical cross sections and ice mass values generally within 5%.

Icing↗

Additional Comparison of Ice Shapes on Full-Chord and Truncated Swept Wing Models from January 2022

A research program was conducted to evaluate the effectiveness of icing tunnel hybrid model design. A hybrid design is where the full-scale leading edge of a wing section is maintained only to a certain percentage of the local chord, while the aft section of the model is redesigned into a shortened or truncated planform. An initial study was conducted in 2020 where the ice shape geometries on a full-chord length version of the swept CRM65 wing model were compared to those from the hybrid version of CRM65 that were obtained in NASA Icing Research Tunnel in 2015. The results were reported in a 2021 paper. For most test conditions, the overall size and shape of the ice shapes compared well. However, the ice shapes from the full-chord model were generally slightly smaller than those from the hybrid model. A follow-on test was conducted in 2022 and obtained ice shapes on both full-chord and hybrid wing models during the same test campaign to eliminate the differences in the tunnel configuration as a cause for the differences observed during the previous investigation. The ice shapes obtained on the full-chord model compared much better to those obtained on the hybrid model during the 2022 test, with nearly identical cross sections and ice mass values generally within 5%.

Icing↗

SORGHUM BIOMASS/FEEDSTOCK GENOMICS RESEARCH FOR BIOENERGY

Objectives: The specific objectives of this project were to: (1) annotate genes, pathways and regulatory networks identified in the sorghum genome sequence that are important for biomass generation, and (2) identify, map and clarify the function of trait loci that modulate accumulation and quality of biomass in sorghum. Approach: Objective 1: Genes encoding proteins involved in biochemical pathways important for biomass generation and plant composition related to biofuel production (i.e., starch, lignin, sugar, cellulose and hemicellulose) were identified and projected onto biochemical pathways using the database MetaCyc (SorgCyc). The pathway projections provide a baseline of information on sorghum genes involved in biochemical pathways thus aiding our downstream analysis of QTL and traits. In addition, the information on sorghum biochemical pathways in Gramene can be readily compared to information on other cereals and other organisms via Gramene’s comparative mapping tools. This information helped identify gaps in the current knowledge of sorghum biochemistry and identified pathways and genes that may be useful to deploy in sorghum for biomass/bioenergy generation. Objective 2: Grain, biomass, and carbohydrate yields were measured in germplasm and a population consisting of 175 recombinant inbred lines (RILs) (F5:6) from the cross of BTx623 (a high yielding early flowering grain sorghum) × Rio (a high biomass sweet sorghum). Plant growth parameters were analyzed to obtain a baseline for downstream meta-analysis including plant height, flowering time and tillering, traits that likely modulate carbohydrate partitioning in various tissues and total biomass. Traits that affect grain yield, biomass (i.e. the tissue harvest index and distribution of grain, stem, and leaf weight), the composition of structural and non-structural carbohydrates, and the overall energy gain of the plant were evaluated. A genetic map of this population was created and QTL analysis will be carried out using QTL Cartographer. Results: As part of this project, our programs screened approximately 10,000 exotic sorghum accessions from the germplasm collection to identify specific lines with potential as an energy crop. Selection of specific lines was based on total biomass yield, strong photoperiod sensitivity, lodging resistance, and drought tolerance. Selection on these criteria resulted in lines that had high biomass yield, long duration of vegetative growth in temperate environments, with good low lodging and the ability to withstand periods of drought. Samples collected from this project (and others) were used to generate NIR calibration curves for structural composition of energy sorghums and sweet sorghums. These calibration curves were used for analysis of structural components in the recombinant inbred line population of BTx623 x Rio. A BTx623 x Rio recombinant inbred line population (grain x sweet sorghum) was evaluated for 28 traits related to grain and stem sugar yield and composition. Across three environments, a total of 145 QTL were identified. A small grain and stem sugar yield QTL tradeoff co-localized with a height and flowering time QTL on chromosome 9. A much larger tradeoff between grain and stem sugar yield co-localized under stress with flowering time locus ma1. More importantly, we were able to identify QTL that increased yield and altered the composition of stem sugar andthe genetic variance for stem sugar concentration did not co-localize with any grain trait QTL. These results suggest that total non-structural carbohydrate yield could be increased by selecting for major QTL from both sweet and grain sorghum types. We conclude that altering genetic potential for grain and stem sugar yield had greater impact on harvestable energy than altering grain and stem sugar composition. However, non-structural carbohydrate yield was more variable than stem sugar and grain composition traits due to biotic stress in some of our experimental locations. In addition to the analysis of non-structural carbohydrates, the genetic basis of leaf and stem structural biomass yield and composition in the same population was evaluated. For structural composition, a total of forty-one traits were evaluated and a total of 158 QTLs were identified across three locations. Many QTLs for structural and non-structural yield co-localized with loci for height, flowering time and stand density/tillering. QTLs for composition had little colocalization across tissues and environments. Separate genetic control for leaf and stem structural carbohydrate composition was identified as well as separate genetic control of protein accumulation in leaf, stem, and grain. QTL and correlation coefficients suggest additional yield and composition loci exist that can be exploited to improve total energy without tradeoffs. In all studies, the results indicated that delayed flowering is critically important in high biomass cellulosic energy sorghum because the resulting long vegetative growth phase results in dramatically increased biomass accumulation and increases the plants’ tolerance to periods of drought that are encountered over the growing season. Genetic control of this photoperiod sensitivity is primarily based on the Ma5/Ma6 loci, which were mapped as part of this project. These genes, and markers associated with them are now being used as part of a marker-assisted breeding program to develop and produce photoperiod-sensitive bioenergy sorghum hybrids.

09 BIOMASS FUELS↗

Alternative High-Performance Motors with Non-Rare Earth Materials, Final Publishable Report

Electric drive systems, which include electric machines and power electronics, are a key enabling technology for advanced vehicle propulsion systems that reduce the petroleum dependence of the transportation sector. To have significant effect, electric drive technologies must be economical in terms of cost, weight, and size while meeting performance and reliability expectations. The goal of the project is to develop traction motors that reduce or eliminate the use of rare-earth materials and meet the DoE specifications for such a traction motor. This is accomplished by evaluating and developing multiple motor topologies in conjunction with advanced materials. Eight non-permanent magnet motor topologies and two reduced or non-rare earth motor topologies are analyzed and compared using a common set of requirements. Five of the motors are built and tested to validate the analysis. This paper provides a detailed quantitative comparison of the different machine topologies that reduce or eliminate rare-earth materials. Conclusions are drawn from the analysis and test data to show the tradeoffs related to selecting each of the motor topologies with the hope of providing practicing engineers and researchers in the field enough guidelines for choosing the “optimum” machine topology that suits their applications and set of performance requirements. Four materials technologies were investigated for their ability to enable a reduced rare earth electric motor. Two of the technologies were soft magnetic materials, one was a non-rare-earth containing permanent magnet technology, and the last was an insulation material. These processing and performance of these materials were first demonstrated in small coupons. The coupon tests justified proceeding to larger scale processing for two of the materials technologies: 1) a dual-phase soft magnetic material for use in rotor laminates and 2) a high temperature insulation material for use as a slot liner in the stator. The dual phase soft magnetic material was produced at a scale sufficient to build and test a sub-scale motor prototype. The high temperature insulation material was first evaluated in a series of “statorettes” before being demonstrated in the stator of one of the full-scale motor prototypes. Testing of the dual phase material revealed issues with process variability in larger production volumes that are being addressed in a subsequent project. The performance of the high-temperature slot liner insulation was demonstrated during the operation of a full-scale prototype. Furthermore, the insulation material was shown to survive aging tests of 2000 hours and 280 °C and 800 hours at 300 °C. This program provides analysis and data to accelerate the introduction of hybrid electric vehicles into the U.S. road vehicle fleet and bring the added benefits of reduced fuel consumption and environmental impacts

33 ADVANCED PROPULSION SYSTEMS↗

A Tool for Performing Link Analysis, Operational Sequence Analysis, and Workload Analysis to Support Nuclear Power Plant Control Room Modernization

Nuclear power continues to have an imperative role for the U.S.’s electricity generation. However, for these nuclear power plants (NPPs) to remain economically viable, new strategies for reducing operations and maintenance costs must be explored. The U.S. Department of Energy Light Water Reactor Sustainability Program is researching how to digitally transform existing analog and hybrid main control rooms into a fully integrated control room that addresses this challenge. The transformation will fundamentally change the conduct of operations for these U.S. NPPs. Human factors engineering has a vital role in this effort, where traditional task analysis methods are important in informing the design of advanced human-system interface displays. This work describes a preliminary tool to support task analysis for the development of these advanced displays. Details on the use of this tool, including the specific task analysis methods offered, are presented in this paper.

99 GENERAL AND MISCELLANEOUS↗

Strategic planning for disaster recovery with stochastic last mile distribution

This paper considers the single commodity allocation problem (SCAP) for disaster recovery, a fundamental problem faced by all populated areas. SCAPs are complex stochastic optimization problems that combine resource allocation, warehouse routing, and parallel fleet routing. Moreover, these problems must be solved under tight runtime constraints to be practical in real-world disaster situations. This paper formalizes the specification of SCAPs and introduces a novel multi-stage hybrid-optimization algorithm that utilizes the strengths of mixed integer programming, constraint programming, and large neighborhood search. The algorithm was validated on hurricane disaster scenarios generated by Los Alamos National Laboratory using state-of-the-art disaster simulation tools and is deployed to aid federal organizations in the US.

97 MATHEMATICS AND COMPUTING↗

Optimal Strategies for Hybrid Battery‐Storage Systems Design

As stationary hybrid energy‐storage systems (HESS) for power systems applications have recently drawn interest due to their enhanced performance and decreasing cost, developing systematic approaches for HESS design while considering controls is gaining traction. Herein, a method is presented to optimally design hybrid battery storage by proposing a mathematical modeling framework, formulated as a mixed integer linear programming model. The optimization is capable of handling multiple subsystems of batteries, considering their economic and technological performance. Decisions involve sizing of the batteries, optimal temporal and strategic dispatch to end uses, and energy sources for charging each battery. The applicability of the model is tested on four case studies for three battery chemistries representing distinct objectives: high‐power, high‐energy, and second life. Compared to traditionally designed battery storage with a homogeneous battery, optimally designed hybrid systems can save 12%–26% of system costs, depending on the nature of the dispatch profile. Findings point to design preference toward the second life battery supplemented with some high‐power or high‐energy battery capacity, or both. With the utilized electricity price structure, customers can experience approximately 10%–35% reduction in their bills.

Koleva, Mariya↗

Numerical simulation of a supersonic reacting mixing layer

In order to arrive at physical models that can adequately describe supersonic combustion, and develop accurate and efficient numerical techniques for the solution of such models' governing equations, a computer program has been developed for the study of reacting flows which considers the multicomponent diffusion and convection of important chemical species, as well as their finite state reaction and the interaction of the fluid mechanics and the chemistry that occurred. The code employs a hybrid Chebyshev pseudospectral technique for integration of the models' resulting governing equations; the program is here used to study a spatially developing and reacting mixing layer.

Drummond, J. Philip↗

Characterization of LWRS Hybrid SiC-CMC-Zircaloy-4 Fuel Cladding after Gamma Irradiation

The purpose of the gamma irradiation tests conducted at the Idaho National Laboratory (INL) was to obtain a better understanding of chemical interactions and potential changes in microstructural properties of a mock-up hybrid nuclear fuel cladding rodlet design (unfueled) in a simulated PWR water environment under irradiation conditions. The hybrid fuel rodlet design is being investigated under the Light Water Reactor Sustainability (LWRS) program for further development and testing of one of the possible advanced LWR nuclear fuel cladding designs. The gamma irradiation tests were performed in preparation for neutron irradiation tests planned for a silicon carbide (SiC) ceramic matrix composite (CMC) zircaloy-4 (Zr-4) hybrid fuel rodlet that may be tested in the INL Advanced Test Reactor (ATR) if the design is selected for further development and testing

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

FOCUSing on Innovative Solar Technologies

Many of ARPA-E’s technology programs seek to break down silos and build new technological communities around a specific energy challenge. In this video, ARPA-E’s Deputy Director for Technology Eric Rohlfing, discusses how the Full-Spectrum Optimized Conversion and Utilization of Sunlight (FOCUS) program is bringing together the photovoltaic (PV) and concentrated solar power (CSP) communities to develop hybrid solar energy systems. This video features interviews with innovators from the FOCUS project team made up by Arizona State University and the University of Arizona, and showcases how the FOCUS program is combining.

14 SOLAR ENERGY↗

NASA developments in solid state power amplifiers

Over the last ten years, NASA has undertaken an extensive program aimed at development of solid state power amplifiers for space applications. Historically, the program may be divided into three phases. The first efforts were carried out in support of the advanced communications technology satellite (ACTS) program, which is developing an experimental version of a Ka-band commercial communications system. These first amplifiers attempted to use hybrid technology. The second phase was still targeted at ACTS frequencies, but concentrated on monolithic implementations, while the current, third phase, is a monolithic effort that focusses on frequencies appropriate for other NASA programs and stresses amplifier efficiency. The topics covered include: (1) 20 GHz hybrid amplifiers; (2) 20 GHz monolithic MESFET power amplifiers; (3) Texas Instruments' (TI) 20 GHz variable power amplifier; (4) TI 20 GHz high power amplifier; (5) high efficiency monolithic power amplifiers; (6) GHz high efficiency variable power amplifier; (7) TI 32 GHz monolithic power amplifier performance; (8) design goals for Hughes' 32 GHz variable power amplifier; and (9) performance goals for Hughes' pseudomorphic 60 GHz power amplifier.

Leonard, Regis F.↗

Dispatch optimization of concentrating solar power with utility-scale photovoltaics

Concentrating solar power (CSP) tower technologies capture thermal radiation from the sun utilizing a field of solar-tracking heliostats. When paired with inexpensive thermal energy storage (TES), CSP technologies can dispatch electricity during peak-market-priced hours, day or night. The cost of utility-scale photovoltaic (PV) systems has dropped significantly in the last decade, resulting in inexpensive energy production during daylight hours. The hybridization of PV and CSP with TES systems has the potential to provide continuous and stable energy production at a lower cost than a PV or CSP system alone. Hybrid systems are gaining popularity in international markets as a means to increase renewable energy portfolios across the world. Typically, CSP-PV hybrid systems have been evaluated using either monthly averages of hourly PV production or scheduling algorithms that neglect the time-of-production value of electricity in the market. To more accurately evaluate a CSP-PV-battery hybrid design, we develop a profit-maximizing mixed-integer linear program ($\mathcal{H}$) that determines a dispatch schedule for the individual sub-systems with a sub-hourly time fidelity. We introduce the mathematical formulation of such a model and show that it is computationally expensive to solve. To improve model tractability and reduce solution times, we offer techniques that: (1) reduce the problem size, (2) tighten the linear programming relaxation of ($\mathcal{H}$) via reformulation and the introduction of cuts, and (3) implement an optimization-based heuristic (that can yield initial feasible solutions for (($\mathcal{H}$) and, at any rate, yields near-optimal solutions). Applying these solution techniques results in a 79% improvement in solve time, on average, for our 48-h instances of (($\mathcal{H}$); corresponding solution times for an annual model run decrease by as much as 93%, where such a run consists of solving 365 instances of (($\mathcal{H}$), retaining only the first 24 h' worth of the solution, and sliding the time window forward 24 h. We present annual system metrics for two locations and two markets that inform design practices for hybrid systems and lay the groundwork for a more exhaustive policy analysis. A comparison of alternative hybrid systems to the CSP-only system reflects that hybrid models can almost double capacity factors while resulting in a 30% improvement related to various economic metrics.

14 SOLAR ENERGY↗

Electronics for a focal plane crystal spectrometer

The HEAO-B program forced the usual constraints upon the spacecraft experiment electronics: high reliability, low power consumption, and tight packaging at reasonable cost. The programmable high voltage power supplies were unique in both application and simplicity of manufacture. The hybridized measurement chain is a modification of that used on the SAS-C program; the charge amplifier design in particular shows definite improvement in performance over previous work.

Goeke, R. F.↗

Program plan for the design and spin test of ceramic blade-metal disk attachments

A current NASA-sponsored contract will develop attachment technology for hybrid turbine rotors having dovetailed ceramic blades and a wrought metal disk. The approach and sequence of activities are described in detail. The program scope includes design, fabrication, and spin testing of hot-pressed silicon nitride blades for operation at rotor inlet temperatures of 2192 F (1200 C) or greater.

Calvert, G. S.↗

The GLUEX DIRC program

The GLUEX experiment is located in experimental Hall D at Jefferson Lab (JLab) and provides a unique capability to search for hybrid mesons in high-energy photoproduction, utilizing a ~9 GeV linearly polarized photon beam. The initial, low-intensity phase of GLUEX was recently completed and a high-intensity phase has begun in 2020 which includes an upgraded kaon identification system, known as the DIRC (Detection of Internally Reflected Cherenkov light), utilizing components from the decommissioned BaBar DIRC. The identification of kaon final states will significantly enhance the GLUEX physics program, to aid in inferring the quark flavor content of conventional (and potentially hybrid) mesons. Here, we describe the installation of the GLUEX DIRC and the analysis of initial commissioning data.

47 OTHER INSTRUMENTATION↗

A hybrid airship concept for Naval missions

A preliminary analysis of a hybrid semibuoyant delta-planform airship was performed using a computer synthesis program. The delta-planform hull shape was studied parametrically to determine the effects on vehicle performance for two Navy antisubmarine missions. The effects of buoyancy ratio, design speed, and altitude were also studied. The results suggest that long-range mission vehicles require a near buoyant or fully buoyant design and that there is no special advantage to the use of a lifting-body hull shape. For shorter-range missions, hybrid vehicles may have merit, and optimum vehicle buoyancy varies depending on whether a minimum-weight or minimum-fuel-consumption design is desired. As compared with conventionally shaped airships, the benefits, if any, from a lifting-body configuration will be limited to missions requiring relatively higher flight speeds.

Harper, M.↗