SEARCH · Search NASA

Results for “Key performance indicator”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29

All sources NASA NTRS DOE OSTI

DOE OSTI2021

Chapter 10 - Economic Considerations for Hydrogen Production with a Focus on Polymer Electrolyte Membrane Electrolysis

This Chapter provides an overview of key economic considerations for hydrogen produced from water electrolysis, with the analyses presented here ranging from high-level summaries to detailed considerations of key market and technological drivers. As the electric power sector evolves to account for increasing shares of renewable energy, opportunities are emerging for technologies capable of storing renewable energy in various forms, including as hydrogen. Opportunities for reducing the cost of hydrogen produced from electrolysis include ensuring access to low-cost wholesale electricity, reducing the capital cost of electrolyzers, and development of systems capable of being dispatchable loads without experiencing significant efficiency penalties throughout lifetime. Our analysis indicates that numerous pathways exist for making hydrogen from electrolysis cost-competitive with hydrogen produced from conventional technologies, and significant opportunities exist for research and development to address performance targets for the future electrolysis systems envisioned here.

cost reduction↗

NASA NTRS1986

Application of intersatellite links to domestic satellite systems

The results of a study on intersatellite link (ISL) applications for domestic satellite communications are presented. It was determined if any technical, economic, or performance benefits could be gained by introducing intersatellite links into a domestic satellite communication network. Several key systems issues of domestic ISL's are addressed. These include the effect of a skewed traffic distribution on the selection of ISL satellite orbit locations, tolerable satellite spacing, and crosslink traffic-handling requirements. An ISL technology assessment is made by performing a parametric link analysis for several microwave and optical implementations. The impact of the crosslink on the end-to-end link performance is investigated for both regenerative and nonregenerative ISL architectures. A comparison is made between single satellite systems operating at C-, and Ku-bands and the corresponding ISL systems in terms of ground segment cost, space segment cost, and net link performance. Results indicate that ISL's can effectively expand the CONUS orbital arc, with a 60 GHz ISL implementation being the most attractive.

Ponchak, D. S.↗

NASA NTRS1986

Application of intersatellite links to domestic satellite systems

Ponchak, D. S.↗

NASA NTRS2011

Bridging Empirical and Physical Approaches for Landslide Monitoring and Early Warning

Rainfall-triggered landslides typically occur and are evaluated at local scales, using slope-stability models to calculate coincident changes in driving and resisting forces at the hillslope level in order to anticipate slope failures. Over larger areas, detailed high resolution landslide modeling is often infeasible due to difficulties in quantifying the complex interaction between rainfall infiltration and surface materials as well as the dearth of available in situ soil and rainfall estimates and accurate landslide validation data. This presentation will discuss how satellite precipitation and surface information can be applied within a landslide hazard assessment framework to improve landslide monitoring and early warning by considering two disparate approaches to landslide hazard assessment: an empirical landslide forecasting algorithm and a physical slope-stability model. The goal of this research is to advance near real-time landslide hazard assessment and early warning at larger spatial scales. This is done by employing high resolution surface and precipitation information within a probabilistic framework to provide more physically-based grounding to empirical landslide triggering thresholds. The empirical landslide forecasting tool, running in near real-time at http://trmm.nasa.gov, considers potential landslide activity at the global scale and relies on Tropical Rainfall Measuring Mission (TRMM) precipitation data and surface products to provide a near real-time picture of where landslides may be triggered. The physical approach considers how rainfall infiltration on a hillslope affects the in situ hydro-mechanical processes that may lead to slope failure. Evaluation of these empirical and physical approaches are performed within the Land Information System (LIS), a high performance land surface model processing and data assimilation system developed within the Hydrological Sciences Branch at NASA's Goddard Space Flight Center. LIS provides the capabilities to quantify uncertainty from model inputs and calculate probabilistic estimates for slope failures. Results indicate that remote sensing data can provide many of the spatiotemporal requirements for accurate landslide monitoring and early warning; however, higher resolution precipitation inputs will help to better identify small-scale precipitation forcings that contribute to significant landslide triggering. Future missions, such as the Global Precipitation Measurement (GPM) mission will provide more frequent and extensive estimates of precipitation at the global scale, which will serve as key inputs to significantly advance the accuracy of landslide hazard assessment, particularly over larger spatial scales.

Kirschbaum, Dalia↗

NASA NTRSDate not supplied

The First Year of KOKEE12M-WETTZ13S VGOS Intensive Scheduling: Status and Efforts Towards Improvement

The KOKEE12M-WETTZ13S (K2-Ws) Intensive series began on January 4, 2021. Evaluation of the first year of schedules has shown that the series is performing reasonably weel, but the schedules could be improved. For example, the number of scheduled observations in a typical 2021 K2-Ws session is approximately half that of the first few MACGO12M-WETTZ13S Intensive sessions, and scheduling fewer observations negatively impats UT1 results. Also, preliminary analysis of the scheduled and achieve SNRs of the K2-Ws observations and the SNRs' ratios shows examples where the achieved SNRs are either too high, indicating long observations that could have been replaced by a greater number of shorter observations, or too low, indicating a lack of robustness that could lead to observation loss. In this poster, we describe key aspects of how the K2-Ws Intensives have been scheduled in 2021. Then we discuss the areas of concern and the status of efforts to make improvements in these areas.

Karen Baver↗

DOE OSTI2026

Lattice vacancy migration barriers in Fe-Ni alloys, and an indication as to why Ni atoms diffuse slowly: A first-principles study

Lattice vacancy migration barriers in ferromagnetic Fe 𝑥 ⁢Ni 1−𝑥 alloys (0.4 ≤ 𝑥 ≤ 0.6) are accurately quantified within the framework of ab initio electronic structure calculations using the nudged elastic band (NEB) method. Both the atomically disordered (A1) fcc phase, as well as the atomically ordered, tetragonal L⁢1 0 phase—which is under consideration as a material for a rare-earth-free gap magnet for advanced engineering applications—are investigated. Across an ensemble of NEB calculations performed on supercell configurations spanning a range of compositions and containing disordered, partially ordered, and fully ordered structures, we find that Ni-vacancy interchanges encounter significantly higher energetic barriers than do Fe-vacancy interchanges. We contend that this aspect is a key factor in determining the differences in mobility between Fe and Ni atoms in this ferromagnetic alloy. Moreover, we are able to interpret these findings in terms of the ferromagnetic alloy's underlying spin-polarized electronic structure. Specifically, we report a coupling between the size of local lattice distortions and the magnitude of the local electronic spin polarization around vacancies. This causes Fe atoms to relax into lattice vacancies, while Ni atoms remain rigidly fixed to their original lattice positions. These results give atomic-scale insight into the longstanding experimental observation that Ni exhibits remarkably slow atomic diffusion in Fe-Ni alloys.

density functional theory↗

DOE OSTI2021

ACCRUE—An Integral Index for Measuring Experimental Relevance in Support of Neutronic Model Validation

A key challenge for the introduction of any design changes, e.g., advanced fuel concepts, first-of-a-kind nuclear reactor designs, etc., is the cost of the associated experiments, which are required by law to validate the use of computer models for the various stages, starting from conceptual design, to deployment, licensing, operation, and safety. To achieve that, a criterion is needed to decide on whether a given experiment, past or planned, is relevant to the application of interest. This allows the analyst to select the best experiments for the given application leading to the highest measures of confidence for the computer model predictions. The state-of-the-art methods rely on the concept of similarity or representativity, which is a linear Gaussian-based inner-product metric measuring the angle—as weighted by a prior model parameters covariance matrix—between two gradients, one representing the application and the other a single validation experiment. This manuscript emphasizes the concept of experimental relevance which extends the basic similarity index to account for the value accrued from past experiments and the associated experimental uncertainties, both currently missing from the extant similarity methods. Accounting for multiple experiments is key to the overall experimental cost reduction by prescreening for redundant information from multiple equally-relevant experiments as measured by the basic similarity index. Accounting for experimental uncertainties is also important as it allows one to select between two different experimental setups, thus providing for a quantitative basis for sensor selection and optimization. The proposed metric is denoted by ACCRUE, short for Accumulative Correlation Coefficient for Relevance of Uncertainties in Experimental validation. Using a number of criticality experiments for highly enriched fast metal systems and low enriched thermal compound systems with accident tolerant fuel concept, the manuscript will compare the performance of the ACCRUE and basic similarity indices for prioritizing the relevance of a group of experiments to the given application.

97 MATHEMATICS AND COMPUTING↗

NASA NTRS1998

Pulse Shaped 8-PSK Bandwidth Efficiency and Spectral Spike Elimination

The most bandwidth-efficient communication methods are imperative to cope with the congested frequency bands. Pulse shaping methods have excellent effects on narrowing bandwidth and increasing band utilization. The position of the baseband filters for the pulse shaping is crucial. Post-modulation pulse shaping (a low pass filter is located after the modulator) can change signals from constant envelope to non-constant envelope, and non-constant envelope signals through non-linear device (a SSPA or TWT) can further spread the power spectra. Pre-modulation pulse shaping (a filter is located before the modulator) will have constant envelope. These two pulse shaping methods have different effects on narrowing the bandwidth and producing bit errors. This report studied the effect of various pre-modulation pulse shaping filters with respect to bandwidth, spectral spikes and bit error rate. A pre-modulation pulse shaped 8-ary Phase Shift Keying (8PSK) modulation was used throughout the simulations. In addition to traditional pulse shaping filters, such as Bessel, Butterworth and Square Root Raised Cosine (SRRC), other kinds of filters or pulse waveforms were also studied in the pre-modulation pulse shaping method. Simulations were conducted by using the Signal Processing Worksystem (SPW) software package on HP workstations which simulated the power spectral density of pulse shaped 8-PSK signals, end to end system performance and bit error rates (BERS) as a function of Eb/No using pulse shaping in an AWGN channel. These results are compared with the post-modulation pulse shaped 8-PSK results. The simulations indicate traditional pulse shaping filters used in pre-modulation pulse shaping may produce narrower bandwidth, but with worse BER than those in post-modulation pulse shaping. Theory and simulations show pre- modulation pulse shaping could also produce discrete line power spectra (spikes) at regular frequency intervals. These spikes may cause interference with adjacent channel and reduce power efficiency. Some particular pulses (filters), such as trapezoid and pulses with different transits (such as weighted raised cosine transit) were found to reduce bandwidth and not generate spectral spikes. Although a solid state power amplifier (SSPA) was simulated in the non-linear (saturation) region, output power spectra did not spread due to the constant envelope 8-PSK signals.

Tao, Jian-Ping↗

NASA NTRS2014

A Physics-Based Modeling Framework for Prognostic Studies

Prognostics and Health Management (PHM) methodologies have emerged as one of the key enablers for achieving efficient system level maintenance as part of a busy operations schedule, and lowering overall life cycle costs. PHM is also emerging as a high-priority issue in critical applications, where the focus is on conducting fundamental research in the field of integrated systems health management. The term diagnostics relates to the ability to detect and isolate faults or failures in a system. Prognostics on the other hand is the process of predicting health condition and remaining useful life based on current state, previous conditions and future operating conditions. PHM methods combine sensing, data collection, interpretation of environmental, operational, and performance related parameters to indicate systems health under its actual application conditions. The development of prognostics methodologies for the electronics field has become more important as more electrical systems are being used to replace traditional systems in several applications in the aeronautics, maritime, and automotive fields. The development of prognostics methods for electronics presents several challenges due to the great variety of components used in a system, a continuous development of new electronics technologies, and a general lack of understanding of how electronics fail. Similarly with electric unmanned aerial vehicles, electrichybrid cars, and commercial passenger aircraft, we are witnessing a drastic increase in the usage of batteries to power vehicles. However, for battery-powered vehicles to operate at maximum efficiency and reliability, it becomes crucial to both monitor battery health and performance and to predict end of discharge (EOD) and end of useful life (EOL) events. We develop an electrochemistry-based model of Li-ion batteries that capture the significant electrochemical processes, are computationally efficient, capture the effects of aging, and are of suitable accuracy for reliable EOD prediction in a variety of usage profiles.

Li-ion Batteries↗

NASA NTRS2012

Experimental and Modeling Investigation of the Effect of Air Preheat on the Formation of NOx in an RQL Combustor

The Rich-burn/Quick-mix/Lean-burn (RQL) combustor concept has been proposed to minimize the formation of oxides of nitrogen (NOx) in gas turbine systems. The success of this low-NOx combustor strategy is dependent upon the links between the formation of NOx, inlet air preheat temperature, and the mixing of the jet air and fuel-rich streams. Chemical equilibrium and kinetics modeling calculations and experiments were performed to further understand NOx emissions in an RQL combustor. The results indicate that as the temperature at the inlet to the mixing zone increases (due to preheating and/or operating conditions) the fuel-rich zone equivalence ratio must be increased to achieve minimum NOx formation in the primary zone of the combustor. The chemical kinetics model illustrates that there is sufficient residence time to produce NOx at concentrations that agree well with the NOx measurements. Air preheat was found to have very little effect on mixing, but preheating the air did increase NOx emissions significantly. By understanding the mechanisms governing NOx formation and the temperature dependence of key reactions in the RQL combustor, a strategy can be devised to further reduce NOx emissions using the RQL concept.

Gas Turbine Engines↗

NASA NTRS2019

NASA Electrified Aircraft Propulsion Efforts

NASA's broad investments in Electrified Aircraft Propulsion (EAP) are reviewed in this paper. NASA investments are guided by an assessment of potential market impacts, technical key performance parameters, and technology readiness attained through a combination of studies, enabling fundamental research, and flight research. NASA has determined that the impact of EAP varies by market and NASA is considering three markets: national/international, on-demand mobility, and short haul regional air transport. Flight research is underway to demonstrate integrated solutions and inform standards and certification processes. This paper focuses on the vehicle related activities, however there are related NASA activities in air space management and vehicle autonomy activities as well as a breakthrough technology project called the Convergent Aeronautics Solutions Project. A key finding is that sufficient technical advances in key areas have been made which indicate EAP is a viable technology for aircraft. Significant progress has been made to reduce EAP adoption barriers and further work is needed to transition the technology to a commercial product and improve the technology so it is applicable to large transonic aircraft. This paper will review the activities of the Hybrid Gas Electric Subproject of the Advanced Air Transport Technology Project, the Revolutionary Vertical Lift Technology Project, and the X-57 Flight Demonstration Project, and discuss the potential EAP benefits for commercial and military applications.

Jansen, Ralph H.↗

DOE OSTI2022

Surface Doping Boosts Triplet Generation Yield in Perovskite-Sensitized Upconversion

Triplet–triplet annihilation-based photon upconversion (TTA-UC) can efficiently generate higher energy photons at low relative fluences. Bulk metal halide perovskites have offered promise in efficiently sensitizing molecular triplet states in the solid state, necessary for the integration of TTA-UC into device-based applications. Recent work focused on TTA-UC from a rubrene triplet annihilator sensitized by perovskite thin films has established relatively efficient charge extraction from the perovskite, forming the triplet exciton in rubrene. Yet, the specifics underpinning charge transfer at the perovskite/rubrene interface are not fully elucidated. Here, to improve device performance and study the properties governing charge transfer at the interface, various organic solvents are explored to treat the perovskite surface. Scanning tunneling microscopy and spectroscopy show a difference in the electronic band structure, where both n- and p-type terminated perovskite surfaces are observed depending on the solvent used. Supported by optical spectroscopy, the impact of the perovskite electronic structure is monitored, indicating that n-type perovskite sensitizers feature higher TTA-UC efficiencies due to favorable band bending resulting in efficient hole-mediated triplet formation. Overall, the tuning of the electronic structure of the perovskite sensitizer through solvent treatment is shown to be a key force in tuning the mechanism of efficient triplet generation.

36 MATERIALS SCIENCE↗

DOE OSTI2024

The US effort towards a muon collider

A multi-TeV muon collider has the unique potential to provide both precision measurements and the highest energy reach in one machine that cannot be paralleled by any currently available technology. There has been significant physics interest on Muon Colliders recently as indicated by the number of publications, relevant workshops, Snowmass activities but also the P5 report. This study describes a possible set of R&D and deliverables of the muon collider accelerator R&D program in the U.S. We describe high-priority studies to be performed in the first phase that will address critical questions for deciding the future plan for a muon collider design. The goal of these studies is to firm up choices for the most challenging components of a muon collider design, and to propose and begin testing and prototyping of components and systems that are needed to have confidence in and inform our specification choices. Key areas wherein the US can provide critical contributions to the newly formed international muon collider collaboration will be discussed as well.

43 PARTICLE ACCELERATORS↗

DOE OSTI2021

Thermal Evolution of Internal Strain in Doped PbTe

Recent improvements in the efficiency of heat-to-electricity energy conversion in lead chalcogenide thermoelectrics involve reducing the thermal conductivity by incorporating large amounts of internal strain. The extent to which typical lead chalcogenide processing techniques (such as doping, ball milling, and densification) increase internal strain and dislocation density must be quantified to improve materials design. In this study, neutron powder diffraction is leveraged to evaluate the internal strain introduced by ball milling in doped and undoped powders. Doping with Na and/or Eu increases internal strain beyond ball milling alone, with the greatest increase from combining the two dopants. Strain recovery occurs in each powder above 400 K but can be suppressed by co-doping, indicating a strong dopant–dislocation interaction in this system. Therefore, high-temperature processing of PbTe powders should be avoided if high internal strain is desired. Low-temperature densification and/or rapid pressing techniques may be key to maintaining internal strain in the final pressed pellet. The diffraction peak asymmetry and correlated elastic softening measured in pressed PbTe pellets in past studies were not observed in the precursor powders measured here, suggesting that measurements of the Debye temperature on final pressed pellets are required to examine the influence of defect-induced elastic softening on thermal conductivity. This work provides key guidance for defect engineering to maximize internal strain and thermoelectric performance in PbTe thermoelectrics.

36 MATERIALS SCIENCE↗

DOE OSTI2023

Comparison of different noble gas injections by massive gas injection on plasma disruption mitigation on Experimental Advanced Superconducting Tokamak

Massive gas injection (MGI) is a traditional plasma disruption mitigation method. This method directly injected massive gas into the pre-disruption plasma and had been developed on the Experimental Advanced Superconducting Tokamak (EAST). Different noble gas injection experiments, including He, Ne, and Ar, were performed to compare the mitigation effect of plasma disruption by evaluating the key parameters such as flight time, pre-thermal quench (pre-TQ), and current quench (CQ). The flight time was shorter for low atomic number ( Z ) gas, and the decrease in flight time by increasing the amount of gas was insignificant. However, both pre-TQ and CQ durations decreased considerably with the increase in gas injection amount. The effect of atomic mass on pre-TQ and CQ durations showed the opposite trend. The observed trend could help in controlling CQ duration in a reasonable area. Moreover, the analysis of radiation distribution with different impurity injections indicated that low Z impurity could reduce the asymmetry of radiation, which is valuable in mitigating plasma disruption. These results provided essential data support for plasma disruption mitigation on EAST and future fusion devices.

Physics↗

DOE OSTI2022

Predictability and empirical dynamics of fisheries time series in the North Pacific

Previous studies have documented a strong relationship between marine ecosystems and large-scale modes of sea surface height (SSH) and sea surface temperature (SST) variability in the North Pacific such as the Pacific Decadal Oscillation and the North Pacific Gyre Oscillation. In the central and western North Pacific along the Kuroshio-Oyashio Extension (KOE), the expression of these modes in SSH and SST is linked to the propagation of long oceanic Rossby waves, which extend the predictability of the climate system to ~3 years. Using a multivariate physical-biological linear inverse model (LIM) we explore the extent to which this physical predictability leads to multi-year prediction of dominant fishery indicators inferred from three datasets (i.e., estimated biomasses, landings, and catches). We find that despite the strong autocorrelation in the fish indicators, the LIM adds dynamical forecast skill beyond persistence up to 5-6 years. By performing a sensitivity analysis of the LIM forecast model, we find that two main factors are essential for extending the dynamical predictability of the fishery indicators beyond persistence. The first is the interaction of the fishery indicators with the SST/SSH of the North and tropical Pacific. The second is the empirical relationship among the fisheries time series. This latter component reflects stock-stock interactions as well as common technological and human socioeconomic factors that may influence multiple fisheries and are captured in the training of the LIM. These results suggest that empirical dynamical models and machine learning algorithms, such as the LIM, provide an alternative and promising approach for forecasting key ecological indicators beyond the skill of persistence.

60 APPLIED LIFE SCIENCES↗

NASA NTRS2021

Detection and Tracking of Aircraft in the Far-Field from Small Unmanned Aerial Systems

Onboard far-field aircraft detection is needed for safe non-cooperative traffic mitigation in autonomous small Unmanned Aerial System (sUAS) operations. Machine vision systems, based on standard optics and visible light detectors, possess the ideal size, weight, and power (SWaP) requirements for sUAS. This work presents the design and analysis of a novel aircraft detection and tracking pipeline based on optical sensing alone. Key contributions of the work include a refined range inequality model based on sensing and detection with FAA well-clear separation assurance distances between aircraft in mind, a detector fusion method to maximize the benefit of two image detectors, and a comparative analysis of Linear Kalman-filtering and Extended Kalman-filtering to seek optimal tracking performance. The pipeline is evaluated offline against multiple intruder platforms, using two types of flight encounters: multirotor sUAS vs. fixed-wing sUAS and multirotor sUAS vs. general aviation(GA)plane. Analysis is restricted to the rate-limiting head-on and departing collision volume cases vertically separated for safety. Results indicate that it is feasible to use the proposed optical spatial-temporal tracking algorithm to provide adequate alerting time to prevent penetration of well-clear separation volumes for both sUAS and GA aircraft.

Unmanned Aerial System↗

DOE OSTI2021

Evaluation and modification of ELM seasonal deciduous phenology against observations in a southern boreal peatland forest

Phenological transitions determine the timing of changes in land surface properties and the seasonality of exchanges of biosphere-atmosphere energy, water, and carbon. Accurate mechanistic modeling of phenological processes is therefore critical to understand and correctly predict terrestrial ecosystem feedbacks with changing atmospheric and climate conditions. However, the phenological components in the land model of the US Department of Energy's (DOE) Energy Exascale Earth System Model (ELM of E3SM) were previously unable to accurately capture the observed phenological responses to environmental conditions in a well-studied boreal peatland forest. In this research, we introduced new seasonal-deciduous phenology schemes into version 1.0 of ELM and evaluated their performance against the PhenoCam observations at the Spruce and Peatland Responses Under Changing Environments (SPRUCE) experiment in northern Minnesota from 2015 to 2018. We found that phenology simulated by the revised ELM (i.e., earlier spring onsets and stronger warming responses of spring onsets and autumn senescence) was closer to observations than simulations from the original algorithms for both the deciduous conifer (Larix laricina) and mixed shrub layers. Moreover, the revised ELM generally produced higher carbon and water fluxes (e.g., photosynthesis and evapotranspiration) during the growing season and stronger flux responses to warming than the default ELM. A parameter sensitivity analysis further indicated the significant contribution of phenology parameters to uncertainty in key carbon and water cycle variables, underscoring the importance of precise phenology parameterization. Furthermore, this phenological modeling effort demonstrates the potential to enhance the E3SM representation of land-climate interactions at broader spatiotemporal scales, especially under anticipated elevated CO 2 and warming conditions.

54 ENVIRONMENTAL SCIENCES↗