Search NASA⌕ Search

SEARCH · Search NASA

Results for “LUNAR DUST”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29
All sourcesNASA NTRSDOE OSTI
NASA NTRS2016

An Examination of LADEE UVS Spectral Variability Associated with the Geminid Meteor Shower

The Lunar Atmosphere and Dust Environment Explorer (LADEE) was an orbital lunar science mission designed to address the goals of the 2003 National Research Council decadal survey, the Lunar Exploration Analysis Group Roadmap, and the “Scientific Context for Exploration of the Moon” (SCEM) report, and has been recommended for execution by the 2011 Planetary Missions Decadal Survey. The LADEE mission goal was to determine the composition of the lunar atmosphere and investigate the processes that control its distribution and variability, including sources, sinks, and surface interactions. LADEE monitored variations in known gasses, such as sodium, potassium, argon and helium, and searched for other, as-yet-undetected gasses of both lunar and extralunar origin. LADEE also examined whether dust is present in the lunar exosphere, and revealed the processes that contribute to its sources and variability. LADEE launched September 6, 2013, entered lunar orbit on October 6, 2013 and operated until April 17, 2014. Examined here are spectral variability at around the time of the Geminid meteor shower (at around December 13-14, 2014). UVS made standard limb observations at the Sunrise and Sunset terminators, as well as observation looking anti-sun on the dark side of the moon (the so called “Sodium-Tail” observation type). The before, during and after spectra are compared to look for variability in line emissions.

Ultraviolet and Visible Spectrometer (UVS)↗
NASA NTRS2016

Observations of Titanium, Aluminum and Magnesium in the Lunar Exosphere by LADEE UVS

The Lunar Atmosphere and Dust Environment Explorer (LADEE) was an orbital lunar science mission designed to address the goals of the 2003 National Research Council decadal survey, the Lunar Exploration Analysis Group Roadmap, and the "Scientific Context for Exploration of the Moon" (SCEM) report, and has been recommended for execution by the 2011 Planetary Missions Decadal Survey. The LADEE mission goal was to determine the composition of the lunar atmosphere and investigate the processes that control its distribution and variability, including sources, sinks, and surface interactions. It will monitor variations in known gasses, such as sodium, potassium, argon and helium, and will search for other, as-yet-undetected gasses of both lunar and extra-lunar origin. Another goal of LADEE was to determine whether dust is present in the lunar exosphere, and reveal the processes that contribute to its sources and variability.

The Ultraviolet-Visible Spectrometer (UVS)↗
NASA NTRS2019

Meteoroids at the Moon: Orbital Properties, Surface Vaporization, and Impact Ejecta Production

We use a dynamical model to characterize the monthly and yearly variations of the lunar meteoroid environment for meteoroids originating from short and long‐period comets and the main‐belt asteroids. Our results show that if we assume the meteoroid mass flux of 43.3 tons per day at Earth, inferred from previous works, the mass flux of meteoroids impacting the Moon is 30 times smaller, approximately 1.4 tons per day, and shows variations of the order of 10% over a year. The mass flux difference is due to the combined effect of the smaller cross‐section of the Moon (factor of 13.46) and Earth's larger gravitational focusing (factor of 2–2.5). The lunar surface is vaporized by these impactors at an average impact vaporization flux of 11.6 × 10−16 g·cm−2·s−1, providing a significant source for the rarefied lunar exosphere. Our model predicts acceptable vaporization rates and reproduces the local time dependence of observations of the dust ejecta cloud, measured by the Lunar Dust Experiment on board NASA's Lunar Atmosphere and Dust Environment (LADEE) satellite. However, the predicted density of the lunar ejecta cloud is four orders of magnitude larger than reported values by LADEE. This discrepancy might be attributed to a much lower yield from meteoroid impacts on fluffy lunar regolith and/or a lower detection efficiency of the LADEE dust detector. We suggest an upper limit of 30 cm per million years for the soil gardening rate from small meteoroids.

Petr Pokorny↗
NASA NTRSDate not supplied

The Behavior of High-Velocity Dust Generated by Lander Plumes in the Lunar Environment

Lunar lander plumes are known to accelerate fine dust to speeds exceeding 2 km/s, and the resultant ejecta may remain in lunar orbit for extended periods of time. Such ejecta could become hazardous to objects in lunar orbit as well as systems on the surface. In order to understand the impact on orbiting lunar infrastructure such as Gateway, as well as assets on the lunar surface, here we consider the dynamics of the resultant high-velocity plume ejecta. Initial conditions were set by the expected near-term lunar activity and the known cone of accelerated dust generated by previous lunar landings. The effects of regular 3-body gravitation, solar radiation pressure, and electric field are included in the model. It is found that although the majority of sub-μm dust is carried away by solar wind and electric fields, about ~10% of the dust between 1.7 km/s and 2.3 km/s reimpacts the surface, much of it near the landing site. The hazard posed by that debris is a function of lander mass and distance from the landing site. The Gateway, when orbiting in the nominal NRHO at the time of a landing, is not expected to be significantly affected by the dust. However, other spacecraft in less elliptic orbits may be at greater risk.

Ejecta↗
NASA NTRS1983

Electron microscopic observations of hydrogen implantation in ilmenites

Hydrogen ion beams were found to form submicrometer, bumpy textures on the surface of ilmenite grains. From this effect, it is believed that similar bumpy textures seen on lunar ilmenite, pyroxene, and olivine grains are likely to be caused by solar wind irradiation. As a consequence, the concentration of bumpy textured grains may be a useful index of surface maturity for lunar soils. An attempt was made to search for grains with these bumpy textures in interplanetary dust and lunar and meteoritic regolith breccias in order to obtain information about the duration of their exposure to the solar wind. Solar wind irradiation was simulated on natural, terrestrial ilmenite. Hydrogen ion beams were directed at small grains and polished sections which were then examined by electron microscopy.

Blanford, G. E.↗
NASA NTRS2023

SelenITA: A Dual Point Lunar Mission to Characterize the Near Surface Dust and Electromagnetic Plasma Environment

SelenITA is a dual CubeSat mission that will provide the first multi-point dust, plasma, and magnetic field measurements in lunar orbit. This mission will advance the understanding of the electromagnetic space environment at the Moon in support of the Artemis program, exploration, and the geosciences. Here we present the science rationale motivating the mission. The candidate mission science objectives include: (1) constrain the origins of crustal magnetic fields; (2) determine the nature of plasma interactions with crustal magnetic fields; (3) characterize plasma waves and turbulence at the Moon; (4) characterize the lunar surface electric potential in varying plasma environments; (5) constrain the composition, thermal state, and structure of the lunar upper mantle and crust; (6) characterize the ionizing radiation in lunar orbit; and lastly, (7) determine the density of the dust exosphere as a function of latitude, longitude, and altitude, including the lunar polar space environment. The measurement requirements include simultaneous two-point observations of the 3-component vector magnetic field, plasma distribution (flux, energy, density, temperature), and single-point observations of energetic particles (protons, electrons, gamma rays), and dust. These measurements are important because it helps us understand how future astronauts, robots, and space hardware will live and work on the lunar surface.

space weather↗
NASA NTRS2023

SelenITA: A Dual Point Lunar Mission to Characterize the Near Surface Dust and Electromagnetic Plasma Environment

SelenITA is a dual CubeSat mission that will provide the first multi-point dust, plasma, and magnetic field measurements in lunar orbit. This mission will advance the understanding of the electromagnetic space environment at the Moon in support of the Artemis program, exploration, and the geosciences. Here we present the science rationale motivating the mission. The candidate mission science objectives include: (1) constrain the origins of crustal magnetic fields; (2) determine the nature of plasma interactions with crustal magnetic fields; (3) characterize plasma waves and turbulence at the Moon; (4) characterize the lunar surface electric potential in varying plasma environments; (5) constrain the composition, thermal state, and structure of the lunar upper mantle and crust; (6) characterize the ionizing radiation in lunar orbit; and lastly, (7) determine the density of the dust exosphere as a function of latitude, longitude, and altitude, including the lunar polar space environment. The measurement requirements include simultaneous two-point observations of the 3-component vector magnetic field, plasma distribution (flux, energy, density, temperature), and single-point observations of energetic particles (protons, electrons, gamma rays), and dust. These measurements are important because it helps us understand how future astronauts, robots, and space hardware will live and work on the lunar surface.

space weather↗
NASA NTRSDate not supplied

Inertial Centrifugal-Based Pre-filter for Spacecraft Life Support Systems

The intrusion of planetary dust inside space vehicles on future Lunar missions may lead to performance compromises of the cabin air-filtration system. The evasive character of the fine planetary dust, in particular lunar dust, could enable the dust to make its way through the seals and barriers of the EVA hatches and become airborne in the cabin. This can result in performance and capacity overload of the high efficiency filter media and particle separation systems. Adequate pre-filtration can substantially reduce the load on the higher efficiency components leading to smaller dust loads during surge and nominal dust loading conditions, thereby protecting and extending the life of these components. A particle separation concept, based on centrifugal separation, is being investigated for its application as a pre-filter. The concept has previously been proposed for application in the aircraft engine industry, as means of capturing corrosive dust and salt deposits that may harm the engine. The technique has the advantages of being passive, integrable to HVAC and space vehicle architecture, and has the potential for high degree of particle separation with proper fluid dynamic design. Computational Fluid Dynamics (CFD) and particle tracing modeling were used to arrive at an initial design for rapid prototyping and testing. If feasible, the concept can be integrated to the Scroll Filter System which is being developed by NASA to address the filtration demands on long during spaceflight and surface missions. This paper will describe the modeling results of this concept.

Life Support Systems↗
NASA NTRSDate not supplied

Inertial Centrifugal-Based Pre-filter for Spacecraft Life Support Systems

The intrusion of planetary dust inside space vehicles on future Lunar missions may lead to performance compromises of the cabin air-filtration system. The evasive character of the fine planetary dust, in particular lunar dust, could enable the dust to make its way through the seals and barriers of the EVA hatches and become airborne in the cabin. This can result in performance and capacity overload of the high efficiency filter media and particle separation systems. Adequate pre-filtration can substantially reduce the load on the higher efficiency components leading to smaller dust loads during surge and nominal dust loading conditions, thereby protecting and extending the life of these components. A particle separation concept, based on centrifugal separation, is being investigated for its application as a pre-filter. The concept has previously been proposed for application in the aircraft engine industry, as means of capturing corrosive dust and salt deposits that may harm the engine. The technique has the advantages of being passive, integrable to HVAC and space vehicle architecture, and has the potential for high degree of particle separation with proper fluid dynamic design. Computational Fluid Dynamics (CFD) and particle tracing modeling were used to arrive at an initial design for rapid prototyping and testing. If feasible, the concept can be integrated to the Scroll Filter System which is being developed by NASA to address the filtration demands on long during spaceflight and surface missions. This paper will describe the modeling results of this concept.

Life Support Systems↗
NASA NTRS2007

NASA'S Simulant Development Program Evolution and Overview

Since its origination under NASA's previous Human System Research and Technology program, the Lunar Simulant Development Program has undergone several changes. NASA recognized as early as the Apollo Program, and even more so as a result of the Apollo missions, that a viable dust and lunar simulant program is critical to the success of its space exploration goals. Unfortunately, this program has suffered the same problems that all programs share from time to time including uncertain budgets, shifting of priorities, and schedule fluctuations. To compound the problem, the process for developing simulants is being redefined and is not a trivial pursuit. Before now, NASA had not attempted to develop a suitable standard simulant since the 1990s when JSC-1 was produced. Although several other simulants have been developed by various groups both before and after the production of JSC-1, JSC-1 had become the de facto standard even though it has some limitations. The development and production of new simulants will address some of these limitations by starting with an assessment of NASA's needs and understanding the required processing in order to make these simulants.

McLemore, Carole↗
NASA NTRS2009

Lunar Missions and Datasets

There are two slide presentations contained in this document. The first reviews the lunar missions from Surveyor, Galileo, Clementine, the Lunar Prospector, to upcoming lunar missions, Lunar Reconnaissance Orbiter (LRO), Lunar Crater Observation & Sensing Satellite (LCROSS), Acceleration, Reconnection, Turbulence and Electrodynamics of Moon's Interaction with the Sun (ARTEMIS), Gravity Recovery and Interior Laboratory (GRAIL), Lunar Atmosphere, Dust and Environment Explorer (LADEE), ILN and a possible Robotic sample return mission. The information that the missions about the moon is reviewed. The second set of slides reviews the lunar meteorites, and the importance of lunar meteorites to adding to our understanding of the moon.

Cohen, Barbara A.↗
NASA NTRS2017

Do Bare Rocks Exist on the Moon?

Astronaut surface observations and close-up images at the Apollo and Chang'e 1 landing sites confirm that at least some lunar rocks have no discernable dust cover. However, ALSEP (Apollo Lunar Surface Experiments Package) measurements as well as astronaut and LADEE (Lunar Atmosphere and Dust Environment Explorer) orbital observations and laboratory experiments possibly suggest that a fine fraction of dust is levitated and moves across and above the lunar surface. Over millions of years such dust might be expected to coat all exposed rock surfaces. This study uses thermal modeling, combined with Diviner (a Lunar Reconnaissance Orbiter experiment) orbital lunar eclipse temperature data, to further document the existence of bare rocks on the lunar surface.

Allen, Carlton↗
NASA NTRS1999

Interaction of Space Suits with Windblown Soil: Preliminary Mars Wind Tunnel Results

Experiments in the Mars Wind Tunnel at NASA Ames Research Center show that under Mars conditions, spacesuit materials are highly susceptible to dust contamination when exposed to windblown soil. This effect was suspected from knowledge of the interaction of electrostatically adhesive dust with solid surfaces in general. However, it is important to evaluate the respective roles of materials, meteorological and radiation effects, and the character of the soil. The tunnel permits evaluation of dust contamination and sand abrasion of space suits by simulating both pressure and wind conditions on Mars. The long-term function of space suits on Mars will be primarily threatened by dust contamination. Lunar EVA activities caused heavy contamination of space suits, but the problem was never seriously manifest because of the brief utilization of the suits, and the suits were never reused. Electrostatically adhering dust grains have various detrimental effects: (1) penetration and subsequent wear of suit fabrics, (2) viewing obscuration through visors and scratching/pitting of visor surfaces, (3) penetration, wear, and subsequent seizing-up of mechanical suit joints, (4) changes in albedo and therefore of radiation properties of external heat-exchanger systems, (5) changes in electrical conductivity of suit surfaces which may affect tribocharging of suits and create spurious discharge effects detrimental to suit electronics/radio systems. Additional information is contained in the original.

Marshall, J.↗
NASA NTRS1978

Dust, impact pits, and accreta on lunar rock 12054

The large variation in the areal density of meteoroid impact pits observed over the face of lunar rock chip 12054,54 was previously attributed to variable amounts of shielding of this chip by loosely bound dust. However, an examination of the directionality of flow of the disk and splash accreta on this chip now suggests that the regions with low areal densities of pits and disk accreta were geometrically shielded by a formerly overhanging part of the rock. The 'overhang' is postulated to have broken off during the return of this rock to earth. There remains, nevertheless, considerable evidence for shielding of rock and grain surfaces on the lunar surface by loosely bound dust. The areal extent and depth of deposition of dust is still poorly understood, however. Populations of disk (or pancake) accreta and 'solid' accreta that show evidence of melting are shown to be correlated with impact pit densities. The population of solid angular accreta with exteriors that exhibit little evidence of melting shows no correlation with impact pit densities.

Zook, H. A.↗
NASA NTRS2024

Self-Cleaning Coatings for Space or Earth Transparent Electrodynamic Dust Shields Usable for Solar Cells

Reducing dust accumulation on any surface is key for lunar missions as dust can damage or impair the performance of everything from deployable systems to solar cells on the Moon’s surface. Electrodynamic dust shields (EDSs) are a key method to actively clean surfaces by running high voltages (but low currents) through electrodes on the surface. The forces generated by the voltage efficiently remove built up, electrically charged dust particles. Innovators at the NASA Kennedy Space Center have developed a new transparent EDS for removing dust from space and lunar solar cells among other transparent surfaces. The new coatings operate at half the voltage of existing EDSs while being 90% thinner. These capabilities are enabled by an innovative combination of electrode patterning and a thin silica protective layer. The reduced thickness and lower voltage operation expands possibilities for integrating EDSs onto transparent surfaces across industries.

Jerry J Wang↗