Search NASA⌕ Search

SEARCH · Search NASA

Results for “Materials processing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29

Time Domain Thermoreflectance and Photodeflection Signatures of He Bubbles in Metals

The mechanical properties of the steel and weldments for different components are affected by the formation of helium bubbles as a result of tritium decay. Therefore, periodic analyses of metals exposed to tritium gas are conducted to determine structural defects and temporal damage from tritium gas decay and He precipitation. Transmission electron microscopy (TEM) and autoradiography are the current analytical methods for the evaluation of metal damage. These methods are functional after several years of damage to the crystal lattice where 3He bubble formation damage can be seen with TEM. New analytical methods that can assess the damage to the crystal lattice early during the exposure to tritium are highly sought to ascertain the effects of material processing and tritium interactions. Further, simple sample preparation, compared to TEM, at a significantly reduced cost is highly desirable. A pump-probe laser technique using a femtosecond laser has been demonstrated to measure the thermal diffusivity of different materials. The time domain thermoreflectance (TDTR) laser setup can provide thermal diffusivity and phonon lifetime, which can be correlated with lattice damage. This advanced nonlinear optical technique will enable measurements of nanostructure damage in the metal before and after tritium exposure within a year. This report discusses current efforts in the design and development of the technique and the application to material characterization.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Two-Dimensional Cadmium Chloride Nanosheets in Cadmium Telluride Solar Cells

In this paper we make use of a liquid nitrogen-based thermomechanical cleavage technique and a surface analysis cluster tool to probe in detail the tin oxide/emitter interface at the front of completed CdTe solar cells. We show that this thermomechanical cleavage occurs within a few angstroms of the SnO 2 /emitter interface. An unexpectedly high concentration of chlorine at this interface, ~20%, was determined from a calculation that assumed a uniform chlorine distribution. Angle-resolved X-ray photoelectron spectroscopy was used to further probe the structure of the chlorine-containing layer, revealing that both sides of the cleave location are covered by one-third of a unit cell of pure CdCl 2 , a thickness corresponding to about one Cl-Cd-Cl molecular layer. We interpret this result in the context of CdCl 2 being a true layered material similar to transition-metal dichalcogenides. Exposing cleaved surfaces to water shows that this Cl-Cd-Cl trilayer is soluble, raising questions pertinent to cell reliability. Our work provides new and unanticipated details about the structure and chemistry of front surface interfaces and should prove important to improving materials, processes, and reliability of next-generation CdTe-based solar cells.

14 SOLAR ENERGY↗

Sparse Data Machine Learning Integration with Theory, Experiment and Uncertainty Quantification: Process-Structure-Property-Performance of Friction Deformation Processing

Computer vision and deep learning tools that advance the ability to establish processing-structure-property-performance (PSPP) relations are presented. The Bayesian binning method for image segmentation enables quantitative analysis of microstructural features in an automated way, while the analysis of shapes and relative orientation of these features reveals local deformation maps indicative of both, material flow and residual stresses due to materials processing. The deep learning method leads to the previous knowledge agnostic mapping of empirically observed microstructural zones in friction stir welding (FSW) process and synthetic microstructure generation capability that is statistically equivalent to experimentally collected data.

97 MATHEMATICS AND COMPUTING↗

New Sensing Platforms for Explosives, Nerve Agents, and Raionucleotides

The purpose of this project was to build on successful past work synthesizing new families of materials and apply these to biological, chemical, and radiological detection. Our primary objectives were to exploit the fluorescence and conductivity properties of metal nanowires and the mechanical and conductivity properties of polymeric helicenes to form prototype sensors that can improve WMD proliferation detection capabilities. We focused on the following tasks: (1) Synthesis of polymeric helicenes and metal nanowires; (2) Processing materials; (3) Characterization material response; and (4) Fabrication sensor devices.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Modelling of the nitric acid reduction process: Application to materials behavior in reprocessing plants

In France, the recycling process of nuclear waste fuels involves the use of hot concentrated nitric acid. The understanding and the prediction of the structural materials (mainly austenitic stainless steels) behaviour requires the determination of the nitric acid reduction process. Nitric acid is indirectly reduced by an autocatalytic mechanism depending on the cathodic overpotential and the acid concentration. This mechanism has been widely studied. All the authors agree on its autocatalytic nature, characterized by the predominant role of the reduction products. It is also generally admitted that nitric acid or the nitrate ion are not the electro-active species. However, uncertainties remain concerning the nature of the electro-active species, the place where the catalytic species regenerates and the thermodynamic and kinetic behaviour of the reaction intermediates. The aim of this study is to clarify some of these uncertainties by performing an electrochemical investigation of the 4 mol.L -1 nitric acid reduction process at 40 deg. C occurring on an inert electrode (platinum or gold). An inert electrode was chosen as a working electrode in a first step in order to avoid its oxidation and focus the research on the reduction mechanism. This experimental work enabled to suggest a coherent sequence of electrochemical and chemical reactions. Then, a kinetic modelling of this sequence was carried out for a gold rotating disk system. In this objective, a thermodynamic study at 25 deg. C led to the evaluation of the composition of liquid and gaseous phases for nitric acid solutions from 0.5 to 22 mol.L -1. The kinetics of the reduction process of nitric acid 4 mol.L -1 was investigated by cyclic voltammetry and chrono-amperometry on an inert electrode at 40 deg. C. A coupling of chrono-amperometry and FTIR in gaseous phase led to the identification of the gaseous reduction products as a function of the cathodic overpotential. These different results showed that for potentials between 0.6 V/NHE and 1.15 V/NHE, the reduction process is autocatalytic. The regeneration of the electro-active species may take place at the surface of the electrode for lower over-potentials, and otherwise in solution. When the potential is lower than 0.6 V/ENH, the fast reduction of nitrogen oxide may lead to the rupture of the autocatalytic cycle. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Influence of Multidirectional Forging on Microstructural, Mechanical, and Corrosion Behavior of Mg-Zn Alloy

Multidirectional forging (MDF) was applied to Mg-6%Zn alloy up to 5 passes successfully at 280 °C. MDF-processed materials were characterized using optical microscope, scanning electron microscope, electron backscatter diffraction, transmission electron microscope, and x-ray diffraction. Obtained results showed a significant reduction in grain size (up to 3.8 μm) having a large fraction of high-angle grain boundaries after 5 passes of MDF process. Maximum tensile strength of 230 MPa was achieved for 5-pass MDF-processed Mg-6%Zn alloy which is about ~ 2.0 times higher in comparison with that of homogenized alloy (117 MPa) and was attributed to higher dislocations density and grain refinement. Corrosion behavior of the alloy was investigated in 0.1 M NaCl solution using potentiodynamic polarization test, electrochemical impedance spectra analysis, and immersion tests. It was found that the corrosion rate of 5-pass MDF sample improved (0.34 mm/year) ~2.5 times in comparison with that of homogenized Mg-6%Zn alloy (0.86 mm/year) due to fine grain structure, which creates more grain boundaries that act as a corrosion barrier.

36 MATERIALS SCIENCE↗

Self-Substitution and the Temperature Effects on the Electrochemical Performance in the High Voltage Cathode System LiMn 1.5+x Ni 0.5-x O 4 (x = 0.1)

The high voltage cathode material, LiMn 1.6 Ni 0.4 O 4 , was prepared by a polymer-assisted method. The novelty of this paper is the substitution of Ni with Mn, which already exists in the crystal structure instead of other isovalent metal ion dopants which would result in capacity loss. The electrochemical performance testing including stability and rate capability was evaluated. The temperature was found to impose a change on the valence and structure of the cathode materials. Specifically, manganese tends to be reduced at a high temperature of 800 °C and leads to structural changes. The manganese substituted LiMn 1.5 Ni 0.5 O 4 (LMN) has proved to be a good candidate material for Li-ion battery cathodes displaying good rate capability and capacity retention. Finally, the cathode materials processed at 550 °C showed a stable performance with negligible capacity loss for 400 cycles.

25 ENERGY STORAGE↗

Panel Session 57: Nuclear Power Plant Waste Management - LLW Processor Issues

This panel resulted in senior utility managers discussing issues with commercial LLW processors. LLW processors updated utilities/NPPs on new or different services or technologies being offered to assist in their radioactive waste management goals, changes to their facility license, revisions to their acceptance guidelines, and emerging compliance issues. Presentations proposed include: 1 - EnergySolutions Waste Processing Overview (Joe Heckman, EnergySolutions (USA)); 2 - Perma-Fix: A Nuclear Services and Waste Management Company (John Kelly, Perma-Fix Environmental Services (USA)); 3 - UniTech - 'Expanding to Reduce Costs' LLW Processor Update (Gregg Johnstone, UniTech Services Group, Inc. (USA)); 4 - Low - Level Radioactive Materials Processing (Michael Miller, Veolia Nuclear Solutions (USA))

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Synthesis and structural evaluation of freeze-cast porous alumina

In this work we fabricated alumina samples by the freeze-casting technique using tert-butanol as the solvent. The prepared materials were examined by scanning electron microscopy and X-ray microtomography. Next, they were coated with sol–gel silica films by dip-coating. Permeability tests were carried out in order to assess the permeation behavior of the materials processed in this study. We observed that the sintering time and alumina loading showed a remarkable effect on both the structural properties and flexural strength of the freeze-cast samples. Nitrogen adsorption tests revealed that the silica prepared in this study exhibited a microporous structure. It was observed that the presence of silica coatings on the alumina surface decreased the CO{sub 2} permeance by about one order of magnitude. Because of the similar kinetic diameters of nitrogen and carbon dioxide, the CO{sub 2}/N{sub 2} system showed a separation efficiency that was lower than that observed for the He/CO{sub 2} and He/N{sub 2} systems. We noticed that increasing the feed pressure improved the separation capacity of the obtained materials. - Highlights: • Porous alumina samples obtained by the freeze-casting technique • Microporous silica coating prepared by a simple sol–gel dip-coating methodology • Samples examined by SEM, μ-CT, and nitrogen sorption tests • Mechanical tests were carried out in the freeze-cast samples. • The presence of silica coatings on the alumina surface decreased the CO{sub 2} permeance.

36 MATERIALS SCIENCE↗

Selected advances in small-angle scattering and applications they serve in manufacturing, energy and climate change

Innovations in small-angle X-ray and neutron scattering (SAXS and SANS) at major X-ray and neutron facilities offer new characterization tools for researching materials phenomena relevant to advanced applications. For SAXS, the new generation of diffraction-limited storage rings, incorporating multi-bend achromat concepts, dramatically decrease electron beam emittance and significantly increase X-ray brilliance over previous third-generation sources. This results in intense X-ray incident beams that are more compact in the horizontal plane, allowing significantly improved spatial resolution, better time resolution, and a new era for coherent-beam SAXS methods such as X-ray photon correlation spectroscopy. Elsewhere, X-ray free-electron laser sources provide extremely bright, fully coherent, X-ray pulses of <100 fs and can support SAXS studies of material processes where entire SAXS data sets are collected in a single pulse train. Meanwhile, SANS at both steady-state reactor and pulsed spallation neutron sources has significantly evolved. Developments in neutron optics and multiple detector carriages now enable data collection in a few minutes for materials characterization over nanometre-to-micrometre scale ranges, opening up real-time studies of multi-scale materials phenomena. SANS at pulsed neutron sources is becoming more integrated with neutron diffraction methods for simultaneous structure characterization of complex materials. In this paper, selected developments are highlighted and some recent state-of-the-art studies discussed, relevant to hard matter applications in advanced manufacturing, energy and climate change.

36 MATERIALS SCIENCE↗

Investigation of Oxidation Mechanisms in HfS 2 and ZrS 2 via In Situ Electron Microscopy

Transition metal dichalcogenides (TMD) combine semiconducting properties with stability and are therefore widely studied for future microelectronic devices. However, applications require integration with a suitable dielectric at a planar, defect-free interface. For Hf- and Zr-based TMDs, the good dielectric properties of hafnia and zirconia imply that direct oxidation is a promising strategy, provided that a high-quality interface and suitable oxide morphology can be formed. Here, in this study, we investigate HfS 2 and ZrS 2 oxidation, aiming to understand pathways toward planar oxide layer formation and the mechanisms that determine the characteristics of the semiconductor/dielectric interface. We use conventional and environmental transmission electron microscopy to reveal changes in morphology and composition of the TMDs under different gaseous environments. We show that oxidation at ambient conditions causes compositional heterogeneities, with local replacement of S by O in both materials. Thermal oxidation causes desulfurization and formation of a smooth but defective oxide layer. In contrast, plasma oxidation appears the best-suited to forming a controlled TMD/dielectric interface with a smooth oxide layer and without major defects. These results provide insight into the opportunities available from HfS 2 and ZrS 2 through oxidation and suggest a materials processing strategy for electronic device fabrication.

HfS2↗

Post Combustion Carbon Capture using Polyethylenimine (PEI) functionalized Titanate Nanotubes

In order to overcome the drawbacks of solvent amines such as, MEA and DEA, scientists and engineers are looking for some great alternatives for CO 2 capture. Different PEIs have widely been investigated to functionalize different solid support materials used for CO 2 capture in recent 15 years. This report provides an overview of the recent advances of such PEI-functionalized adsorbents, in which PEI are loaded on different silica materials, nanotubes, membranes and other materials such as, mesoporous alumina, clay, activated carbon, fly ash, mesoporous carbon, mesoporous sponge-like TUD-1, metal organic frameworks, nanofibrillated cellulose, porous chitosan bead, resin, glass fiber, zeolites, etc. Among them, PEI-funtionalized PTNTs using titanate nano tubes is selected, and various PEIfunctionalized PTNTs were fabricated for CO 2 capture from the flue gas in fossil energy power generation. To investigate the effects of synthesis conditions on the CO 2 capture capacities, two different temperatures (130 and 140°C) and three times (1, 3 and 5 days) were used in the hydrothermal process. Material characterization with TEM and XRD confirmed that PTNTs were successfully synthesized in all the cases, and PEI was loaded onto the PTNTs with the wet impregnation process. The nano-tubular size, porosity and surface areas of the PTNTs varied with the synthesis conditions, and the PTNTs synthesized at 130°C possess the bigger pore size than those synthesized at 140°C. The CO 2 capture experiment using simulated flue gas under wet condition showed that overall highest capture capacity of 78-79 mg g-1 was achieved with the adsorbents synthesized at 130°C and with the synthesis time of 3 or 5 days. Besides, the CFD simulation model is developed by using MFIX for the PEI-PTNTs solid sorbents suggested in our carbon capture experiments. For this, the simulation model is calibrated through adjusting the concentration of active amines sites based on the comparison between simulation and experiment. After that, the simulation model of the adjusted titan-based solid sorbent is used for checking the performance of the solid sorbents and finding the optimized flow rate in the reactor model developed by NETL.

36 MATERIALS SCIENCE↗

Ultrasonic Measurements of Temperature Distribution and Heat Fluxes Across Containments of Extreme Environments

Extreme conditions are common in energy conversion, material processing, nuclear, airspace, and military applications. In such environments, the most hardened insertion sensors do not perform reliably for long. Ultrasonic measurements, on the other hand, can be acquired noninvasively, with sensitive components kept away from the damaging environment. We have previously developed the ultrasonic method for measuring the spatial distribution of temperatures in solid materials applicable in the cases when large thermal gradients are present. In the developed approach, we use the echogenically segmented ultrasound propagation path, structured to contain engineered or naturally occurring echogenic features, to produce a train of echoes in response to an external pulse of ultrasonic excitation. The delays between the echoes, which encode the information on the temperature distribution in the corresponding segments, is used to reconstruct unknown temperature profile. In this paper, we outline the results of pilot-scale testing of the developed approach and demonstrate its application to the measurements of the temperature distribution across the containment of a high-temperature combustion process. The validation results show that the estimated temperature profile is correctly captured, and the measurement accuracy can be comparable with traditional insertion sensors, such as thermocouples. Overall, the testing has confirmed that the developed approach has matured to become an attractive alternative to conventional sensing in solving challenging problems of long-term temperature measurements in extreme environments. Heat fluxes and thermal stresses in the structure can then be characterized noninvasively using the measured temperature distribution as the basis.

Jia, Yunlu↗

Process Development for Nanostructured Photovoltaics

Photovoltaic manufacturing is an emerging industry that promises a carbon-free, nearly limitless source of energy for our nation. However, the high-temperature manufacturing processes used for conventional silicon-based photovoltaics are extremely energy-intensive and expensive. This high cost imposes a critical barrier to the widespread implementation of photovoltaic technology. Argonne National Laboratory and its partners recently invented new methods for manufacturing nanostructured photovoltaic devices that allow dramatic savings in materials, process energy, and cost. These methods are based on atomic layer deposition, a thin film synthesis technique that has been commercialized for the mass production of semiconductor microelectronics. The goal of this project was to develop these low-cost fabrication methods for the high efficiency production of nanostructured photovoltaics, and to demonstrate these methods in solar cell manufacturing. We achieved this goal in two ways: 1) we demonstrated the benefits of these coatings in the laboratory by scaling-up the fabrication of low-cost dye sensitized solar cells; 2) we used our coating technology to reduce the manufacturing cost of solar cells under development by our industrial partners.

14 SOLAR ENERGY↗

Adjustment of ablation shapes and subwavelength ripples based on electron dynamics control by designing femtosecond laser pulse trains

A quantum model is proposed to investigate femtosecond laser pulse trains processing of dielectrics by including the plasma model with the consideration of laser particle-wave duality. Central wavelengths (400 nm and 800 nm) strongly impact the surface plasmon field distribution, the coupling field intensity distribution (between the absorbed intensity and the surface plasma), and the distribution of transient localized free electron density in the material. This, in turn, significantly changes the localized transient optical/thermal properties during laser materials processing. The effects of central wavelengths on ablation shapes and subwavelength ripples are discussed. The simulation results show that: (1) ablation shapes and the spacing of subwavelength ripples can be adjusted by localized transient electron dynamics control using femtosecond laser pulse trains; (2) the adjustment of the radii of ablation shapes is stronger than that of the periods of subwavelength ripples.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Carbon Nanotubes: Printed Carbon Nanotube Electronics and Sensor Systems (Adv. Mater. 22/2016)

Printed electronics and sensors enable new applications ranging from low-cost disposable analytical devices to large-area sensor networks. Recent progress in printed carbon nanotube electronics in terms of materials, processing, devices, and applications is discussed on page 4397 by A. Javey and co-workers. Here, the research challenges and opportunities regarding the processing and system-level integration are also discussed for enabling of practical applications.

36 MATERIALS SCIENCE↗