Search NASA⌕ Search

SEARCH · Search NASA

Results for “Nonlinear reduction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29

Dressed electrostatic solitary excitations in three component pair-plasmas: Application in isothermal pair-plasma with stationary ions

In this work electrostatic solitary waves in a three component pair-plasma consisting of hot isothermal electrons (or negative fullerene ions), positrons (or positive fullerene ions), and stationary positive ions (say, dust particulates) are studied. Using reductive perturbation method, plasma fluid equations are reduced to a Korteweg-de Vries (KdV) equation. Considering the higher-order nonlinearity, a linear inhomogeneous equation is derived, and the stationary solutions of these coupled equations are achieved by applying the renormalization procedure of Kodama-Taniuti. It is observed that in the linear approximation and applying Fourier analysis, two electrostatic modes, namely, upper or optical and lower or acoustic modes, are present. However, the application of reductive perturbation technique confirms that only acoustic-electrostatic mode can propagate in such plasma as KdV soliton, the amplitude and width of which are studied regarding to plasma parameters {sigma} (positron-to-electron temperature ratio) and {delta} (stationary cold ions-to-electron density ratio). It is also observed that the higher-order nonlinearity leads to deformation of the soliton structure from bell-shaped to W-shaped depending on the variation in values of the plasma parameters {sigma} and {delta}. It is revealed that KdV-type solitary waves cannot propagate in three component pair-plasma when the pair-species temperature is equal.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Energy Transfer in Rotating Turbulence

The influence or rotation on the spectral energy transfer of homogeneous turbulence is investigated in this paper. Given the fact that linear dynamics, e.g. the inertial waves regime tackled in an RDT (Rapid Distortion Theory) fashion, cannot Affect st homogeneous isotropic turbulent flow, the study of nonlinear dynamics is of prime importance in the case of rotating flows. Previous theoretical (including both weakly nonlinear and EDQNM theories), experimental and DNS (Direct Numerical Simulation) results are gathered here and compared in order to give a self-consistent picture of the nonlinear effects of rotation on tile turbulence. The inhibition of the energy cascade, which is linked to a reduction of the dissipation rate, is shown to be related to a damping due to rotation of the energy transfer. A model for this effect is quantified by a model equation for the derivative-skewness factor, which only involves a micro-Rossby number Ro(sup omega) = omega'/(2(OMEGA))-ratio of rms vorticity and background vorticity as the relevant rotation parameter, in accordance with DNS and EDQNM results fit addition, anisotropy is shown also to develop through nonlinear interactions modified by rotation, in an intermediate range of Rossby numbers (Ro(omega) = (omega)' and Ro(omega)w greater than 1), which is characterized by a marco-Rossby number Ro(sup L) less than 1 and Ro(omega) greater than 1 which is characterized by a macro-Rossby number based on an integral lengthscale L and the micro-Rossby number previously defined. This anisotropy is mainly an angular drain of spectral energy which tends to concentrate energy in tile wave-plane normal to the rotation axis, which is exactly both the slow and the two-dimensional manifold. In Addition, a polarization of the energy distribution in this slow 2D manifold enhances horizontal (normal to the rotation axis) velocity components, and underlies the anisotropic structure of the integral lengthscales. Finally is demonstrated the ability of a generalized EDQNM (Eddy Damped Quasi-Normal Markovian) model to predict the underlying spectral transfer structure and all the subsequent developments of classic anisotropy indicators in physical space, when compared to recent LES results. Even if the applications mainly concern developed strong turbulence, a particular emphasis is given to the strong formal analogy of this EDQNM2 model with recent weakly nonlinear approaches to wave-turbulence.

Cambon, Claude↗

A Second Order Self-Consistent IMEX Method for Radiation Hydrodynamics

We present a second order non-linearly consistent implicit/explicit (methods that use com- bination of implicit/explicit discretizations are often referred to as IMEX (IMplicit/EXplicit) methods [2,1,3]) time integration technique for solving radiation hydrodynamics problems. The idea is to hybridize an implicit and an explicit discretization in a nonlinearly consis- tent way in order to achieve second order time convergent calculations. In this scope, the hydrodynamics equations are discretized explicitly making use of the capability of well- understood explicit schemes. On the other hand , the radiation diffusion part is solved implicitly. In the view of the non-linearly consistent IMEX method, the hydrodynamics equations are solved as part of the non-linear function evaluation within the framework of the Jacobian-Free Newton Krylov (JFNK) method [16,14]. This is to avoid order reductions in time convergence due to the operator splitting. We present results from several test prob- lems in order to validate the numerical order of the scheme. For each test, we established second order time convergence.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

On the variable effects of climate change on Pacific salmon

Pacific salmon are sensitive to changes in water temperature and streamflow. Climate change and water management may alter the streamflow and temperature regimes to which local species have adapted, hence affecting the survival and growth of juvenile salmon. This study estimates the changes in smolt survival rates of Chinook (Oncorhynchus tshawytscha) and Steelhead (Oncorhynchus mykiss) in Columbia River Basin (CRB) due to climatic changes and water management practices (reservoir regulation and water extraction). A multivariate nonlinear regression model is developed between juvenile survival rate and streamflow as well as stream temperature, and incorporates the inherent nonlinearity between survival rate and stream temperature. Using streamflow and stream temperature simulations from a state-of-the-art integrated earth system model, results indicate that climatic changes may reduce basin average juvenile Steelhead survival rates and smolt Chinook survival in Snake River by the 2080s. Water management, on the other hand, can alleviate the reduction in Chinook and Steelhead survival rates induced by climate change through mitigation of stream temperature warming. Integration of the nonlinear response of survival rate to stream temperature in addition to considering water management impacts on streamflow and temperature reduces the overestimate of the negative impacts from climate change. Furthermore, stream warming likely benefits juvenile survival in areas where the current stream temperature is lower than the optimal temperature zone. Our findings add new insights on climate and human impacts on juvenile salmon survival in CRB that are useful for conservation planning.

Zhang, Xiao↗

Robust Output Feedback Control Design for Inertia Emulation by Wind Turbine Generators

Wind generation has gained widespread use as a renewable energy source. Most wind turbines and other renewables connected to the grid through converters result in a reduction in the natural inertial response to grid frequency changes. The doubly-fed induction generator (DFIG) can be controlled to compensate for this reduction and, in fact, provide faster response than traditional synchronous machines. This paper proposes to design observer based output feedback linear quadratic regulator (LQR) and H control laws to realize the inertia emulation function and deliver fast frequency support. Furthermore, the aim is to track the reference speed by a diesel synchronous generator (DSG) in order to reach the desired inertia. The control signal is computed based on a reduced order model using the balanced truncation technique. A comparison with selective modal analysis (SMA) and balanced truncation model reduction techniques is presented. Comprehensive results show the effective emulation of synthetic inertia by implementing the control laws on a nonlinear three- phase diesel-wind system. The proposed technique is analyzed for different short circuit ratio (SCR) scenarios.

17 WIND ENERGY↗

Preconditioning for Hyper-reduction in Reduced Order Models

Many projection-based reduced order models (pROM) that utilize the governing equation and data to accelerate physical simulations can be applied to nonlinear dynamical systems. To avoid full order model (FOM) scale update for each time step, hyperreduction techniques are developed to sample high dimensional nonlinear terms. Our study aims to investigate if preconditioning the least-squares problem used for the nonlinear approximation can improve the robustness of the condition number of the problem while achieving high accuracy. In our study, we use the row-normalization matrix motivated by the Christoffel function as the preconditioner and solve the corresponding weighted least-squares problem. Numerical results for Lagrangian hydrodynamics examples are analyzed to explore how the preconditioner works compared to existing hyper-reduction techniques.

97 MATHEMATICS AND COMPUTING↗

Molecular Structure and Thermodynamics of CO 2 and Water Adsorption on Mica

The adsorption of CO 2 and water on clay surfaces plays a key role in applications, such as gas storage in saline aquifers and depleted hydrocarbon reservoirs, but is not yet fully understood. Here, we study the adsorption of CO 2 and water vapor using Grand Canonical Monte Carlo and molecular dynamics simulations. At a bulk pressure of 100 bar, pure CO 2 adsorbs strongly on mica and forms extensive layers next to it. CO 2 adsorption is lowered substantially if introducing water vapor above mica and is largely eliminated when the relative humidity (RH) approaches about 60%. When pure water vapor is introduced above a mica surface, a subnanometer thick liquid water film develops on it to form apparent liquid–solid and liquid–vapor interfaces simultaneously. Using the identification of truly interfacial molecules (ITIM) analysis, we delineate how individual water layers develop in this film as RH increases. We highlight that the water film is spatially heterogeneous and the true liquid–vapor interface emerges only at an RH of 60–80%. Introducing 100 bar of CO 2 into the water vapor above the mica surface modulates water adsorption nonlinearly: at RH = 0.01%, the water adsorption is reduced by ∼30%; as RH increases, the reduction is weakened, and eventually, enhancement of water adsorption by about 7% occurs at RH = 90%. These variations are attributed to the interplay of film thinning by high-pressure CO 2 , competition of mica surface sites by CO 2 molecules, and energetic and entropic stabilization of interfacial water by CO 2 molecules.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Microturbulence Suppression by Alfvén Eigenmodes in the DIII-D Tokamak

Mitigation and suppression of low-𝑘 turbulence are observed during the nonlinear evolution of toroidicity-induced Alfvén eigenmodes (TAEs) in DIII-D experiments. Turbulence mitigation begins when the dominant TAE starts to depart from the typical shear Alfvén wave polarization. TAE activity then evolves into a new state, characterized by more discrete coherent modes, increased total amplitude, and more localized radial structures. During this transition, a narrow shear flow layer forms, driven by an enhanced Reynolds stress force, with a shearing rate that exceeds the local turbulence decorrelation rate, leading to a full turbulence suppression. Furthermore, these observations indicate the imbalance between Reynolds and Maxwell stress forces during the nonlinear evolution of the TAE and their important roles in shear flow generation and turbulence reduction.

Alfvén waves↗

Truncated Nonlinear Interferometry for Quantum-Enhanced Atomic Force Microscopy

Nonlinear interferometers that replace beam splitters in Mach-Zehnder interferometers with nonlinear amplifiers for quantum-enhanced phase measurements have drawn increasing interest in recent years, but practical quantum sensors based on nonlinear interferometry remain an outstanding challenge. Here, we demonstrate the first practical application of nonlinear interferometry by measuring the displacement of an atomic force microscope microcantilever with quantum noise reduction of up to 3 dB below the standard quantum limit, corresponding to a quantum-enhanced measurement of beam displacement of 1.7 fm/√Hz. Further, we minimize photon backaction noise while taking advantage of quantum noise reduction by transducing the cantilever displacement signal with a weak squeezed state while using dual homodyne detection with a higher power local oscillator. This approach may enable quantum-enhanced broadband, high-speed scanning probe microscopy.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A Tailored Convolutional Neural Network for Nonlinear Manifold Learning of Computational Physics Data Using Unstructured Spatial Discretizations

In this work, we propose a nonlinear manifold learning technique based on deep convolutional autoencoders that is appropriate for model order reduction of physical systems in complex geometries. Convolutional neural networks have proven to be highly advantageous for compressing data arising from systems demonstrating a slow-decaying Kolmogorov n-width. However, these networks are restricted to data on structured meshes. Unstructured meshes are often required for performing analyses of real systems with complex geometry. Our custom graph convolution operators based on the available differential operators for a given spatial discretization effectively extend the application space of deep convolutional autoencoders to systems with arbitrarily complex geometry that are typically discretized using unstructured meshes. We propose sets of convolution operators based on the spatial derivative operators for the underlying spatial discretization, making the method particularly well suited to data arising from the solution of partial differential equations. We demonstrate the method using examples from heat transfer and fluid mechanics and show better than an order of magnitude improvement in accuracy over linear methods.

97 MATHEMATICS AND COMPUTING↗

ELECTRON HEATING IN MAGNETOROTATIONAL INSTABILITY: IMPLICATIONS FOR TURBULENCE STRENGTH IN THE OUTER REGIONS OF PROTOPLANETARY DISKS

The magnetorotational instability (MRI) drives vigorous turbulence in a region of protoplanetary disks where the ionization fraction is sufficiently high. It has recently been shown that the electric field induced by the MRI can heat up electrons and thereby affect the ionization balance in the gas. In particular, in a disk where abundant dust grains are present, the electron heating causes a reduction of the electron abundance, thereby preventing further growth of the MRI. By using the nonlinear Ohm's law that takes into account electron heating, we investigate where in protoplanetary disks this negative feedback between the MRI and ionization chemistry becomes important. We find that the “e-heating zone,” the region where the electron heating limits the saturation of the MRI, extends out up to 80 AU in the minimum-mass solar nebula with abundant submicron-sized grains. This region is considerably larger than the conventional dead zone whose radial extent is ∼20 AU in the same disk model. Scaling arguments show that the MRI turbulence in the e-heating zone should have a significantly lower saturation level. Submicron-sized grains in the e-heating zone are so negatively charged that their collisional growth is unlikely to occur. Our present model neglects ambipolar and Hall diffusion, but our estimate shows that ambipolar diffusion would also affect the MRI in the e-heating zone.

79 ASTRONOMY AND ASTROPHYSICS↗

Parallel processors and nonlinear structural dynamics algorithms and software

Techniques are discussed for the implementation and improvement of vectorization and concurrency in nonlinear explicit structural finite element codes. In explicit integration methods, the computation of the element internal force vector consumes the bulk of the computer time. The program can be efficiently vectorized by subdividing the elements into blocks and executing all computations in vector mode. The structuring of elements into blocks also provides a convenient way to implement concurrency by creating tasks which can be assigned to available processors for evaluation. The techniques were implemented in a 3-D nonlinear program with one-point quadrature shell elements. Concurrency and vectorization were first implemented in a single time step version of the program. Techniques were developed to minimize processor idle time and to select the optimal vector length. A comparison of run times between the program executed in scalar, serial mode and the fully vectorized code executed concurrently using eight processors shows speed-ups of over 25. Conjugate gradient methods for solving nonlinear algebraic equations are also readily adapted to a parallel environment. A new technique for improving convergence properties of conjugate gradients in nonlinear problems is developed in conjunction with other techniques such as diagonal scaling. A significant reduction in the number of iterations required for convergence is shown for a statically loaded rigid bar suspended by three equally spaced springs.

Belytschko, Ted↗

Effects of water on the strength of Zerodur

An experimental design matrix was constructed to determine the effects of time and temperature water soak on the strength of Zerodur glass-ceramic. It was found that strength does increase in a nonlinear manner which is consistent with existing theories of crack tip blunting and residual stress reduction.

Tucker, Dennis S.↗

Nonlinear equilibration of localized instabilities on a baroclinic jet

Dynamical mechanisms underlying the equilibration of absolute instability are examined in a nonlinear, quasigeostrophic, two-layer model. The key to understanding the nonlinear equilibration is in recognizing that linear absolute instabilities can be stabilized both by a reduction of the vertical shear and by enhancement of the mean barotropic velocity. In a localized domain, the equilibration process proceeds with the creation of locally convectively unstable regions downstream, which encroach onto the locally absolutely unstable region until the local instability is suppressed. That local instabilities exist only if absolutely unstable regions span a minimum size is verified by eigenvalue calculations of three-dimensional flows. Numerical examples suggest that this critical size is at least 9000 km for a wide range of parameter values chosen to investigate the midlatitude storm tracks. Fluctuations arising from local absolute instability obtain maximum amplitude in the downstream convectively unstable regions rather than in the absolutely unstable regions themselves. Together, these results suggest that if an equilibrated absolute instability were to occur in midlatitudes, a zonal band of surface easterlies exceeding 900 km would be required and the associated enhanced variances would not be found coincident with the regions of absolute instability.

Delsole, Timothy M.↗

A Reduction Procedure for One-Dimensional Joint Models and Application to a Lap Joint

A reduction procedure for joint models that was developed in earlier work is extended to allow for relative motion between surfaces, and the effect of this procedure on timestep issues is considered. A general one-dimensional structure containing a frictional interface is considered. Coulomb friction is approximated with nonlinear springs of large but finite stiffness. The system of equations describing this structure is reduced in a procedure similar to Guyan reduction by assuming that the system deforms only in the shapes that it takes when the interface is massless. The result of this procedure is that the dynamics associated with the interface region are removed from the analysis. Following the development of the reduction procedure, the reduced formulation is specialized to the case of a simple lap joint. A numerical example problem is considered in which both the full and reduced equations of motion are integrated over time. It is seen that, for the example problem considered, the reduction procedure results in tremendous computational savings with little loss of accuracy. Based on the results of the simple example problem, it appears that the proposed reduction procedure has potential to be an accurate and effective method of alleviating the timestep difficulties associated with direct finite element analysis of joints in structural dynamics applications.

42 ENGINEERING↗

MHD modeling of magnetotail instability for localized resistivity

We present results of a three-dimensional magnetohydrodynamic (MHD) simulation of magnetotail evolution initiated by a sudden occurrence or increase of spatially localized resistivity as the major expected concequence of some localized microinstability. Because of the absence of a quantitative model, possible variations of resistivity levels with current density, or the reduction thereof, are not incorporated in the present investigation. The emphasis of the study is on an investigation of the changes to the overall evolution brought about by this localization, in particular, on the disruption and diversion of the cross-tail current and the nonlinear evolution of the magnetotail instability. The immediate consequences of the occurrence of the localized resistance and the resulting electric field are a reduction and diversion of the electric current around the region of high resistivity, associated with an increase of B(sub z) ('dipolarization') at the earthward edge and a decrease of B(sub z) at the tailward edge of this region. These effects, however, are localized and do not involve a reduction of the total cross-tail current and hence do not lead to the global development of a 'substorm current wedge,' which includes not only the reduction of the cross-tail current but also the buildup of a global field-aligned current system of 'regional 1' type (toward the Earth on the dawnside and away on the duskside of the tail). Such signatures develop at a later time, as consequences of a three-dimensional tearing instability, which is triggered by the occurrence of the resistivity. These features are found in combination with plasmoid formation and ejection, quite similar to results of earlier simulations with uniform resistivity. Differences are found in the timescale of the evolution, which tends to be shorter for localized resistivity, and in the propagation of the dipolarization effects in the equatorial plane. Whereas for uniform resistivity the temporal increase in B(sub z) tends to propagate tailward, apparently due to a pileup effect in the near-Earth region, an earthward propagation is found for the localized resistivity. This propagation results from an earthward convection of the gradient in B(sub z), which is set up by the reconnection process further tailward.

Hesse, Michael↗

Nonlinear structures: Cnoidal, soliton, and periodical waves in quantum semiconductor plasma

Properties and emerging conditions of various nonlinear acoustic waves in a three dimensional quantum semiconductor plasma are explored. A plasma fluid model characterized by degenerate pressures, exchange correlation, and quantum recoil forces is established and solved. Our analysis approach is based on the reductive perturbation theory for deriving the Kadomtsev-Petviashvili equation from the fluid model and solving it by using Painlevé analysis to come up with different nonlinear solutions that describe different pulse profiles such as cnoidal, soliton, and periodical pulses. The model is then employed to recognize the possible perturbations in GaN semiconductor.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗