Search NASA⌕ Search

SEARCH · Search NASA

Results for “Organic electrode materials”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Mechanistic understanding of aging behaviors of critical-material-free Li 4 Ti 5 O 12 //LiNi 0.9 Mn 0.1 O 2 cells with fluorinated carbonate-based electrolytes for safe energy storage with ultra-long life span

Behind-the-meter storage (BTMS) systems - a viable method to minimize potential risk of blackout events and stabilize the grid - require a different type of cost-effective energy storage with excellent safety, ultra-long (>20 years) cycle life and reasonable energy density compared that of electric vehicles. To increase the energy density and reduce the cost of a long-term cyclable lithium-titanate-based cell, it is required to employ a critical-material-free high voltage cathode and an electrolyte with good electrochemical and transport properties. In this report the long-term electrochemical performance and behaviors of selected critical-material-free Li 4 Ti 5 O 12 (LTO)//LiNi 0.9 Mn 0.1 O 2 (LNMO) full cells for BTMS applications are evaluated and analyzed in the optimized voltage range of 1.4-2.7 V at 45 degrees C with different fluorinated carbonate-based electrolytes. The fluoroethylene carbonate (FEC)-based electrolyte cell shows the highest capacity retention of 57.9% and Coulombic efficiency (CE) of 99.96% after 1000 cycles, potentially attributed to a dense, homogenous and less resistive LiF-rich solid-electrolyte interphase (SEI) layer formed on the surface of LTO that may mitigate electrolyte decomposition and maintain relatively low cell impedance during cycling. The 3,3,3-fluoroethylmethyl carbonate (F-EMC)-based electrolyte cell, however, presents the worst performance with lower capacity and a sharp decrease of CE, due to unstable and non-uniform SEI formation and continuous oxidative electrolyte decomposition. This mechanistic understanding of cell aging behaviors and failure mechanisms with detailed analysis of surface chemistry and electrode morphology can guide design of new electrode chemistries and electrolyte formulations for the development of BTMS batteries.

25 ENERGY STORAGE↗
DOE OSTI2025

Air-Enabled Electricity-Driven Depolymerization of Polyesters

This work describes the use of electrochemically generated superoxide (with air as the source of O 2 ) at carbon electrodes as a reagent for the depolymerization of polyesters. Here, we report the electricity-driven selective conversion of these common ester-based wastes into their foundational carboxylate and alkoxide building blocks. The results pave the way for an electrochemical approach to the recovery of molecular materials from ester wastes that uses air and electricity as key reagents for material recycling.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Boosting the sodium storage behaviors of carbon materials in ether-based electrolyte through the artificial manipulation of microstructure

The porous carbon blacks rationally designed by a facile yet efficient NH 3 thermal etching route have been investigated as anode materials in an ether-based electrolyte for sodium-ion batteries. The as-synthesized CBN35 carbon black with a 35% weight loss after NH3 thermal etching exhibited a large specific charge capacity of 352 mAh g -1 at 50 mA g -1 and a superior rate capability of 101 mAh g -1 at 16000 mA g -1 , due to its highest microporosity, an appropriate surface area, a desirable microstructure, and a promising hybrid intercalation mechanism. Impressively, even cycled at 1600 mA g -1 over 3200 cycles, an outstanding reversible capacity of 103 mAh g -1 with a negligible 0.0162% capacity loss per cycle can still be achieved. Based on the multimodal characterizations including the structural probes of phase evolution for carbon materials, the electrochemical techniques, and the surface-sensitive XAS measurements, the exceptional electrochemical properties should stem from several merits of modified carbon black system. While the particular microporous structure provides relatively more accessible sodium storage sites, a novel hybrid intercalation mechanism in ether-based electrolyte would incorporate the sodium ion insertion into the disordered structure with the solvated sodium ion species co-intercalation into the graphitic phase. In addition to the diffusion-controlled redox reactions, the noticeable surface-induced pseudocapacitive reactions also significantly contribute to the charge storage upon sodiation and guarantee the rapid migrations of sodium ions/solvated compounds. In conclusion, this system further features a controlled emergence of a robust but thin solid electrolyte interphase layer, which could suppress the side reactions of active electrode with reactive electrolyte, maintain the fragile porous structure upon cycling, and facilitate the migrations of sodium ions and solvated sodium ion compounds.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Controlling swelling in mixed transport polymers through alkyl side-chain physical cross-linking

Semiconducting conjugated polymers bearing glycol side chains can simultaneously transport both electronic and ionic charges with high charge mobilities, making them ideal electrode materials for a range of bioelectronic devices. However, heavily glycolated conjugated polymer films have been observed to swell irreversibly when subjected to an electrochemical bias in an aqueous electrolyte. The excessive swelling can lead to the degradation of their microstructure, and subsequently reduced device performance. An effective strategy to control polymer film swelling is to copolymerize glycolated repeat units with a fraction of monomers bearing alkyl side chains, although the microscopic mechanism that constrains swelling is unknown. Here we investigate, experimentally and computationally, a series of archetypal mixed transporting copolymers with varying ratios of glycolated and alkylated repeat units. Experimentally we observe that exchanging 10% of the glycol side chains for alkyl leads to significantly reduced film swelling and an increase in electrochemical stability. Through molecular dynamics simulation of the amorphous phase of the materials, we observe the formation of polymer networks mediated by alkyl side-chain interactions. When in the presence of water, the network becomes increasingly connected, counteracting the volumetric expansion of the polymer film.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Ultrasmooth Epitaxial Pt Thin Films Grown by Pulsed Laser Deposition

Platinum (Pt) thin films are useful in applications requiring high-conductivity electrodes with excellent thermal and chemical stability. Ultrasmooth and epitaxial Pt thin films with single-crystalline domains have the added benefit of providing ideal templates for the subsequent growth of heteroepitaxial structures. Here, we grow epitaxial Pt (111) electrodes (ca. 30 nm thick) on sapphire (α-Al 2 O 3 (0001)) substrates with pulsed laser deposition. This versatile technique allows control of the growth process and fabrication of films with carefully tailored parameters. X-ray scattering, atomic-force microscopy, and electron microscopy provide structural characterization of the films. Various gaseous atmospheres and temperatures were explored to achieve epitaxial growth of films with low roughness. A two-step (500 °C/300 °C) growth process was developed, yielding films with improved epitaxy without compromising roughness. The resulting films possess ultrasmooth interfaces (<3 Å) and high electrical conductivity (6.9 × 10 6 S/m). Finally, Pt films were used as current collectors and templates to grow lithium manganese oxide (LiMn 2 O 4 (111)) epitaxial thin films, a cathode material used in Li-ion batteries. In conclusion, using a solid-state ionogel electrolyte, the films were highly stable when electrochemically cycled in the 3.5-4.3 V vs Li/Li + range.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Long-Range Resonant Charge Transport through Open-Shell Donor–Acceptor Macromolecules

A grand challenge in molecular electronics is the development of molecular materials that can facilitate efficient longrange charge transport. Research spanning more than two decades has been fueled by the prospects of creating a new generation of miniaturized electronic technologies based on molecules whose synthetic tunability offers tailored electronic properties and functions unattainable with conventional electronic materials. However, current design paradigms produce molecules that exhibit off-resonant transport under low bias, which limits the conductance of molecular materials to unsatisfactorily low levels several orders of magnitude below the conductance quantum 1 G 0 and often results in an exponential decay in conductance with length. Here, we demonstrate a chemically robust, air-stable, and highly tunable molecular wire platform comprised of open-shell donor−acceptor macromolecules that exhibit remarkably high conductance close to 1 G 0 over a length surpassing 20 nm under low bias, with no discernible decay with length. Single-molecule transport measurements and ab initio calculations show that the ultralong-range resonant transport arises from extended π-conjugation, a narrow bandgap, and diradical character, which synergistically enables excellent alignment of frontier molecular orbitals with the electrode Fermi energy. The implementation of this long-sought-after transport regime within molecular materials offers new opportunities for the integration of manifold properties within emerging nanoelectronic technologies.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Ketjenblack-Supported and Unsupported ZrO 2 –ZrN Nanoparticle Systems for Enabling Efficient Electrochemical Nitrogen Reduction to Ammonia

Artificial N 2 fixation via the electrocatalytic nitrogen (N 2 ) reduction reaction (NRR) has been recently promoted as a rational route toward reducing energy consumption and CO 2 emission as compared with the traditional Haber–Bosch process. Nevertheless, optimizing NRR relies on developing highly efficient electrocatalysts. Herein, we report on the reliable and reproducible synthesis of two promising electrocatalysts in either the presence or absence of Ketjenblack (KB), namely, ZrO 2 –ZrN@KB and ZrO 2 –ZrN systems, synthesized through the nitriding of Zr. Both materials had never previously been considered for NRR, to the best of our knowledge. Nevertheless, both of these electrocatalysts incorporated a combination of tetragonal ZrO 2 , ZrON, and cubic ZrN and showed excellent activity and durability toward NH 3 formation. Moreover, the maximum NH3 production rate of 84.1 μg h –1 mg –1 at -0.7 V vs a reversible hydrogen electrode (RHE) was achieved with the ZrO 2 –ZrN electrocatalyst with an impressive Faradaic efficiency of 21.2% at -0.6 V vs RHE, indicating a high selectivity associated with the NRR. Additionally, the catalysts demonstrated excellent stability during the electrolysis process and recycling tests. Here we postulate that the combination of exposed active sites of ZrN and ZrO 2 likely contributes to the enhanced NRR performance attributed to ZrO 2 –ZrN.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Review—Fundamental Uranium Electrochemistry and Spectroscopy in Molten Salt Systems

Uranium is a key element used for nuclear energy production. Some advanced reactor designs, specifically molten salt reactors, will continue to use uranium as the fissile material for energy production. These new technologies require an intimate understanding of uranium chemistry during and after energy production. This review covers contemporary research on the coordination chemistry and behavior of uranium with the coolant and pyroprocessing salts as proposed for use in future reactor designs. Discussed topics include the nature of U redox reactions involving the reduction of U(III) to U metal and oxidation of U(III) to U(IV). These systems have been interrogated using cyclic voltammetry, chronopotentiometry, and optical and X-ray absorption spectroscopies. Insights obtained into the electrode potentials, the uranium species, and their diffusion coefficients in alkali halide melts from decades of research are summarized selectively. Further, perspectives are provided on the importance of unifying studies for comparison across multiple institutions. The application of synchrotron radiation research and multimodal approaches involving two (or more) probes, such as the widespread combination of UV–visible spectroscopy and electroanalysis known as spectroelectrochemistry, can provide new knowledge about the main process of uranium electrorefining—diffusion, as will be demonstrated in this review through the lack of comparable results.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Graphite Lithiation under Fast Charging Conditions: Atomistic Modeling Insights

The charging of lithium ion batteries in a fast and safe manner is critical for promoting the mass adoption of electric vehicles. Li intercalation in graphite electrodes is known to be one of the bottlenecks during the fast charging process. The mechanism of Li diffusion in highly polarized graphite anode at high current rates remains, however, not well understood. In this work, Density Functional Theory (DFT) calculations are used to gain insights into the Li diffusion process in graphite when it is far from equilibrium under fast charging conditions. The effect of uncompensated charges on Li mobility is determined in the highly polarized regions of the anode close to the interfaces. The extra charge was found to increase the interlayer spacing in the diffusion layer and adjacent channels, increasing the diffusivity and promoting the formation of Li clusters. A concerted diffusion mechanism at the edge of high-concentration Li domains is proposed to enhance the diffusion of Li.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

The Evolution of LiNi 0.5 Mn 0.3 Co 0.2 O 2 Particle Damage from Fast Charging in Optimized, Full Li-Ion Cells

Fast charging batteries are critical to the widespread adoption of electric vehicles to compete with refueling times of combustion-based vehicles. In the near term, adapting current commercial battery technologies to perform better under fast charging conditions through engineering optimizations will greatly expedite the process while exploratory fast-charging electrode materials are being pursued. To do so, the degradation modes in optimized Li-ion batteries need to be completely explored to understand fast charging limits while maintaining a high energy density and a long cycle life. While lithium plating on graphite still remains a challenge, cathode degradation also plays a key role in battery performance. In this work, we used nano- and micro-X-ray computed tomography to characterize the mechanical degradation of LiNi 0.5 Mn 0.3 Co 0.2 O 2 (NMC532) in optimized Li-ion batteries cycled at three rates, 1C, 6C, and 9C, and at different stages of cycle life, 225 and 600 cycles. We report despite using a conservative upper voltage cutoff limit aimed to minimize extensive cathode degradation, higher charging rates and increased cycling caused the polycrystalline NMC532 particles to fracture and pulverize, which likely drives cathode capacity fade and contributes to the decrease in overall cell performance.

25 ENERGY STORAGE↗
DOE OSTI2025

Automated Redox Titrations via Interdigitated Electrode Arrays: Application to the Mediated Electron Transfer Interrogation of Charge and Rate on Electrodeposited Polymers

Mediated electron transfer (MET) plays a crucial role in energy storage and conversion technologies such as redox targeting flow batteries (RTFBs), yet its experimental investigation often requires labor-intensive and low-throughput setups. To address this, we developed a microfabricated interdigitated electrode array (IDA) platform that enables automated, high-throughput electrochemical redox titration measurement to be performed to study the MET process. Our redox titration method enables simultaneous measurement of the charge capacity and rate of MET processes on a material or surface. Automated redox titration (ART) facilitates systematic investigation of the MET process across a broad parameter space, exemplified through the study of polypyrrole (PPy) and a pyrene-4,5,9,10-tetrone azo group-based polymer (PTAP), both redox-active polymers relevant to various energy storage applications. Using PPy as a model material, 500 redox titration measurements were conducted within 50 h, varying the electrode gap widths, polymer charging potentials, voltammetric scan rates, and electrolyte concentrations. Finite-element simulations confirmed the electrochemical responses and elucidated the kinetics of the MET reactions. Our automated methodology was further tested with PTAP, revealing a surprising charging potential dependence on the rate of MET. The automation, flexibility, and scalability of our redox titration platform pave the way not only for advanced studies of MET processes relevant to RTFBs, but also with implications in the understanding of next-generation energy storage materials, molecular electrocatalysis, and biosensing.

electrochemical analysis↗
DOE OSTI2024

A Redox-Electrodialysis Model with Zero Fitting Parameters: Insights into Process Limitations, Design, and Material Interventions

Redox-Electrodialysis (r-ED) is an electrochemical desalination cell architecture that has recently received considerable interest, due to its low energy demand relative to electrochemical desalination technologies that rely on electrode-based ion removal. To further improve the energy efficiency of r-ED, we developed a lumped mathematical model with no adjustable parameters to investigate the various sources of overpotential within the cell. Existing models of electrodialysis and r-ED cells either do not accurately incorporate all phenomena contributing to the overpotential or utilize empirical fitting parameters. The model developed here indicates that ohmic overpotentials, especially in the diluate chamber, are the most significant contributors to energy losses. Based on this insight, we hypothesized that adding an ion exchange resin wafer in the diluate compartment would increase the ionic conductivity and decrease the energy demand. Experimental results showed an 18% reduction in specific energy use while achieving the same degree of salt removal (20 mM to 12 mM). Furthermore, the resin wafer enabled complete desalination to potable drinking levels at a current density previously unachievable within practical operating voltage limits (4.93 mA cm -2 ). We also expanded the model to explore differences in r-ED energy use between configurations using multiple cells and a single cell with increased area.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Location-Dependent Cobalt Deposition in Smartphone Cells upon Long-Term Fast-Charging Visualized by Synchrotron X-ray Fluorescence

In this work, we investigate the transition-metal dissolution of the layered cathode material LiCoO 2 upon repeated fast-charging of three smartphone batteries from different manufacturers using synchrotron micro X-ray fluorescence (μ-XRF). Using this spatially resolved technique, dissolution of Co and subsequent location-dependent deposition on the anode are observed. μ-XRF mapping of selected parts of the anode electrode sheets, such as electrode folds and edges of the jelly roll, reveals the difference in the way Co is deposited on specific regions of the anode electrode. While some folds show no depositions, edges of the anode show gradually accumulating Co depositions. Furthermore, careful quantification of the dissolved Co reveals that the capacity loss scales with the amount of deposited Co on the anode, that is, total Co loss from within the cathode. Soft X-ray absorption spectroscopy of the Co depositions on the anode shows that Co is mainly deposited in a reduced 2 + state. While optimization of the fast-charging protocol mitigates Li plating on the anode, no significant difference in the amount of deposited Co can be observed between an optimized and a nonoptimized fast-charging algorithm.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Tracking the prelude of the electroreduction of carbon monoxide via its interaction with Cu(100): Studies by operando scanning tunneling microscopy and infrared spectroscopy

The first isolable intermediate in the electrochemical reduction of carbon dioxide is carbon monoxide. This species, or its hydrated form, formic acid, is also the primary end product from all but a handful of metallic electrodes; with the latter, hydrogen gas is generated, but it emanates from the reduction of water and not from CO 2 . Only one electrode material, zerovalent copper, can spawn, in greater-than-trace quantities, a variety of species that are more highly reduced than CO. Hence, if the aim is to pursue a reaction trail of the reduction of CO 2 to products other than CO, it would be both logical and expedient to track the electrocatalytic reaction of CO itself. Heterogeneous electrocatalysis is a surface phenomenon; it transpires only when the reactant, CO in this case, chemisorbs on, or chemically interacts with, the Cu electrode surface. There is no electrocatalytic reaction if there is no CO adsorption. In ultrahigh vacuum, no CO resides on the Cu(100) surface at temperatures higher than 200 K. However, under electrochemical conditions, CO is chemisorbed on Cu at ambient temperatures at a given potential. Here, we thus paired, in seriatim fashion, scanning tunneling microscopy (STM) and polarization-modulation IR reflection-absorption spectroscopy (PMIRS) to document the influence of applied potential on the coverage, the molecular orientation, and the adlattice structure of CO adsorbed on Cu(100) in alkaline solutions; the results are described in this paper.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Phenolic Resin Derived Hard Carbon Anode for Sodium-Ion Batteries: A Review

Sodium-ion batteries are complementary to lithium-ion batteries for grid-scale energy storage applications due to lower cost, safety, and potential for sustainable supply chains. The past decade has witnessed enormous research efforts in developing hard carbon anode materials for sodium-ion batteries. Phenolic resins have received significant attention as hard carbon precursors due to their high carbon yield, highly cross-linked structure, low cost, mature technology, and excellent electrochemical performance of corresponding hard carbon anode. This Review exclusively highlights the state-of-the-art preparation of hard carbon from phenolic resins, and the electrochemical performance in sodium-ion batteries. Cross-linked resins are prepared from three phenolic monomers (phenol, resorcinol, and phloroglucinol) to produce hard carbon. The effects of carbonization temperature on the microstructure, and electrochemical properties of hard carbon have been summarized here. Hard carbon formation, and sodium storage mechanisms have been briefly outlined. Finally, this Review provides an industrial perspective on hard carbon production at scale.

aromatic compounds↗
DOE OSTI2022

Efficient electrocatalytic valorization of chlorinated organic water pollutant to ethylene

Electrochemistry can provide an efficient and sustainable way to treat environmental waters polluted by chlorinated organic compounds. However, the electrochemical valorization of 1,2-dichloroethane (DCA) is currently challenged by the lack of a catalyst that can selectively convert DCA in aqueous solutions into ethylene. Here, in this work, we report a catalyst comprising cobalt phthalocyanine molecules assembled on multiwalled carbon nanotubes that can electrochemically decompose aqueous DCA with high current and energy efficiencies. Ethylene is produced at high rates with unprecedented ~100% Faradaic efficiency across wide electrode potential and reactant concentration ranges. Kinetic studies and density functional theory calculations reveal that the rate-determining step is the first C–Cl bond breaking, which does not involve protons—a key mechanistic feature that enables cobalt phthalocyanine/carbon nanotube to efficiently catalyse DCA dechlorination and suppress the hydrogen evolution reaction. The nanotubular structure of the catalyst enables us to shape it into a flow-through electrified membrane, which we have used to demonstrate >95% DCA removal from simulated water samples with environmentally relevant DCA and electrolyte concentrations.

Choi, Chungseok↗
DOE OSTI2023

Calcination Heterogeneity in Li-Rich Layered Oxides: A Systematic Study of Li 2 CO 3 Particle Size

Li- and Mn-rich (LMR) layered oxide positive-electrode materials exhibit high energy density and have earth-abundant compositions relative to conventional Ni-, Mn-, and Co-oxides (NMCs). The lithiation of coprecipitated precursors is a key part of the synthesis and offers opportunities for tuning the properties of LMR materials. Whereas the morphology of transition metal precursors has received substantial attention, that of Li sources has not. Using Li 1.14 Mn 0.57 Ni 0.29 O 2 as a model system, in this work, we establish a detailed understanding of LMR calcination pathways via in situ and ex situ diffraction, spectroscopy, microscopy, and thermogravimetry. Our work shows that a large Li 2 CO 3 particle size modulates a previously misunderstood thermogravimetric feature present at the Li 2 CO 3 melting point during layered oxide calcination and causes heterogeneity at larger length scales (inter-secondary particle) than previously reported (intra-secondary particle). We found that electrochemical performance is largely insensitive to this heterogeneity. Finally, this work highlights the sensitivity of layered oxide calcination pathways to synthesis conditions and suggests design rules to minimize calcination heterogeneity in layered oxides beyond LMR.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Wastepaper-derived porous carbon supported cobalt nanocomposites for all solid-state flexible supercapacitor

The conversion of wastepaper into high-value carbon materials has gained significant attention as a sustainable strategy for energy storage applications. Owing to its low cost, abundance, and intrinsic fibrous structure, wastepaper serves as an attractive precursor for carbon-based electrode materials. In this work, a novel electrode comprising cobalt nanoparticles and Co 3 O 4 embedded in wastepaper-derived porous carbon has been developed for use in a flexible all-solid-state asymmetric supercapacitor. The integration of cobalt nanoparticles and Co 3 O 4 introduces redox-active centres, which enhance the electrochemical activity of the carbon framework. Mean while, the interconnected porous and conductive carbon network enables rapid ion diffusion and efficient electron transport, synergistically improving the overall electrochemical performance. It delivers a high specific capacitance of 61.5 Fg -1 , a power density of 5143 W kg -1 , and an energy density of 9 Wh kg -1 at a current density of 2.5 A/ g. Furthermore, the device maintains outstanding cycling stability, retaining 82.86 % of its capacitance after 10,000 charge-discharge cycles. Practical applicability is confirmed through its ability to power

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗