Search NASA⌕ Search

SEARCH · Search NASA

Results for “PLASMA LAYER”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29
All sourcesNASA NTRSDOE OSTI
NASA NTRS1983

Nonequilibrium radiative heating during outer planet atmospheric entry

The contradictory results obtained by investigators assessing the influence of finite-rate ionization on the radiative heating of probes entering the atmospheres of Jupiter and Saturn are discussed. Tiwari and Szema (1979) found that the radiation heating increased, whereas Leibowitz (1973) and Liebowitz and Kuo (1976) found that it decreased in relation to the results obtained when the ionization rate was assumed to be in equilibrium at the local thermodynamic conditions. The study presented here is limited to stagnation shock layers for nonviscous, hydrogen-helium plasmas with cold, nonblowing conditions at the probe heat shield. It is found that the radiative heating comes mainly from the Balmer region of the spectrum, where the shock layer is optically thin.

Nelson, H. F.↗
NASA NTRS1976

Observations of magnetospheric bursts of high-energy protons and electrons at approximately 35 earth radii with Imp 7

Proton and electron bursts (above 0.29 MeV and above 0.22 MeV, respectively) in the vicinity of the magnetosphere are studied on the basis of a high-sensitivity experiment. Although the bursts are a permanent feature in the upstream solar wind, the range of observed intensities varies by at least 5 orders of magnitude, depending on magnetic activity. The bursts are typically associated with weak fluctuations in the interplanetary magnetic field, which suggests the presence of hydromagnetic waves. Burst are found in and about the magnetosheath, plasma sheet, and magnetotail boundary layer, and also outside the bow shock; however, they rarely appear at distances greater than 10 earth radii north or south of the neutral sheet. Dawn-dusk asymmetries are present in intensity but not necessarily in frequency of occurrence. Proton bursts are highly anisotropic upstream from the bow shock and in the magnetosheath, while electron bursts are anisotropic only in the upstream solar wind.

Sarris, E. T.↗
NASA NTRS1978

Experimental observations of strong double layers

A computer simulation is applied to the production of strong electric potential double layers (DL) in a triple plasma device. The simulation is intended to represent DL in the low magnetosphere above the auroral zones. The DL are described as standing electrostatic shocks with different energy coefficients in their strong and weak forms. The strong DL was generally found to be unstable, but stability could be imparted if a population of trapped electrons was presented. Stability increased with the length of the system. A schematic for the system is presented, and a phase-space plot of electrons (indicating system stability) is graphed.

Coakley, P.↗
NASA NTRS1981

Tearing modes at the magnetopause

This paper examines the possible occurrence of tearing modes in the dayside magnetopause. First, the expected magnetic signature of tearing, as obtained from existing theory, is reviewed. Magnetometer data from one terrestrial magnetopause crossing of Jupiter's magnetopause are then examined in detail. Magnetic field oscillations are found in three subsegments of the terrestrial crossing at a frequency of 0.1-0.2 Hz and with peak amplitudes of 5-10 nanotesla (nT), and in one segment of the Jovian crossing, at 0.05-0.1 Hz and with 2-nT amplitude. The frequency range, as well as the orientation of the magnetic field perturbation vectors, agrees with a model in which tearing-produced magnetic islands are convected past the satellite with the plasma flow in the current layer. In both cases the magnetopause structure was of the rotational discontinuity type with a nonvanishing normal magnetic field component. Hence, if the tearing structures were active, i.e., growing, at the observation site, ion tearing (or perhaps resistive tearing, with the resistivity provided by microturbulence) must be invoked. But it is also possible that the structures were passive, consisting of 'debris' from active tearing elswhere on the magnetopause surface, this debris being convected along the magnetopause past the observation site.

Greenly, J. B.↗
NASA NTRS1981

Generation of coronal electric currents due to convective motions on the photosphere

Generation of electric currents in a magnetized plasma overlying a dense convective layer is studied, assuming that the magnetic field perturbation is small and satisfies the force-free equation. Currents are produced by rotational motions on the boundary in the case of a uniform equilibrium field. In a simple two-dimensional bipolar configuration, however, both irrotational and incompressible motions give rise to currents, and the current density has a peak at the magnetic neutral line. Scaling laws for the current density as well as for the stored magnetic energy are derived, and the possibility of heating the solar corona through the dissipation of coronal currents generated in this way is discussed.

Sakurai, T.↗
NASA NTRS1984

Oxidation behavior of a thermal barrier coating

Thermal barrier coatings, consisting of a plasma sprayed calcium silicate ceramic layer and a CoCrAlY or NiCrAlY bond coat, were applied on B-1900 coupons and cycled hourly in air in a rapid-response furnace to maximum temperatures of 1030, 1100, or 1160 C. Eight specimens were tested for each of the six conditions of bond-coat composition and temperature. Specimens were removed from test at the onset of failure, which was taken to be the formation of a fine surface crack visible at 10X magnification. Specimens were weighed periodically, and plots of weight gain vs time indicate that weight is gained at a parabolic rate after an initial period where weight was gained at a much greater rate. The high initial oxidation rate is thought to arise from the initially high surface area in the porous bond coat. Specimen life (time to first crack) was found to be a strong function of temperature. However, while test lives varied greatly with time, the weight gain at the time of specimen failure was quite insensitive to temperature. This indicates that there is a critical weight gain at which the coating fails when subjected to this test.

Miller, R. A.↗
NASA NTRS1984

Scale lengths in quasi-parallel shocks

A review was carried out of ISEE and Voyager spacecraft magnetometer data to determine if quasi-parallel bow shocks are really broad, disordered regions. The key parameter was the deceleration scale (thickness, Lp) across which random energy would need to increase and a localized electrostatic field (E) would be present. Lp would define the breadth of the shock and be associated with a plasma deceleration. The ISEE 1 satellite collected data on the electron density, bulk speed, magnetic intensity, and electron temperature in November 1977 during five traverses of the bow shock. Similar data were gathered from an interplanetary shock wave in 1981. The evidence supported the concept of a plasma deceleration across a thin layer (Lp) in both types of shocks. The layers were about 50 times (interplanetary) and 20 times (earth) thinner than surrounding magnetic fluctuation regions. It is asserted that the regions of deceleration, although much thinner, are the actual shocks and not the entire regions of magnetic fluctuations.

Scudder, J. D.↗
NASA NTRS1985

The location of the subsolar bow shock of Venus - Implications for the obstacle shape

The rise in periapsis altitude with time has allowed the Pioneer Venus spacecraft to begin probing the subsolar Venus bow shock. This has allowed the altitude of the subsolar bow shock to be determined by in situ observations for the first time. The observed altitude of 2280 km at the nose together with the previously determined terminator altitude can be used to infer the shape of the obstacle using the gasdynamic model of the solar wind interaction with Venus. When this shape is compared to the measured locations of the Venus ionopause (defined as the point where the magnetosheath magnetic field pressure and ionospheric thermal pressures are equal), it is found that the observed ionopause position is too low to qualify as the obstacle. It is inferred that a layer of the mass loaded plasma in the magnetosheath forms the magnetic barrier.

Russell, C. T.↗
NASA NTRS1989

Self-consistent model of the low-latitude boundary layer

A simple, two-dimensional, steady state, viscous model of the dawnside and duskside low-latitude boundary layer is presented. The model described boundary layer currents, magnetic fields, and plasma flow in a self-consistent way. Coupling to the ionosphere via field-aligned currents and associated field-aligned potential drops governed by a simple conductance law are included in the model. The model equations are given and the results from the model are compared with observations.

Phan, T. D.↗
NASA NTRS1992

Magnetic field, reconnection, and particle acceleration in extragalactic jets

Extra-galactic radio jets are investigated theoretically taking into account that the jet magnetic field is dragged out from the central rotating source by the jet flow. Thus, magnetohydrodynamic models of jets are considered with zero net poloidal current and flux, and consequently a predominantly toroidal magnetic field. The magnetic field naturally has a cylindrical neutral layer. Collisionless reconnection of the magnetic field in the vicinity of the neutral layer acts to generate a non-axisymmetric radial magnetic field. In turn, axial shear-stretching of reconnected toroidal field gives rise to a significant axial magnetic field if the flow energy-density is larger than the energy-density of the magnetic field. This can lead to jets with an apparent longitudinal magnetic field as observed in the Fanaroff-Riley class II jets. In the opposite limit, where the field energy-density is large, the field remains mainly toroidal as observed in Fanaroff-Riley class I jets. Driven collisionless reconnection at neutral layers may lead to acceleration of electrons to relativistic energies in the weak electrostatic field of the neutral layer. A simple model is discussed for particle acceleration at neutral layers in electron/positron and electron/proton plasmas.

Romanova, M. M.↗
NASA NTRS1996

Effects of plasmaspheric ion heating due to ionospheric and magnetospheric sources

In an initial study, the He(+) observations from the Retarding Ion Mass Spectrometer on Dynamics Explorer 1 (RIMS/DE 1) was examined for more than 120 transits of the plasmasphere in the fall of 1981. The He(+) to H(+) ratio was determined as it varied spatially over portions of the DE 1 orbit, and its variation with solar and magnetic activities and with local time, focusing specifically on the inner plasmasphere. These variations were compared along the L = 2 field line with calculations made by the Field Line Interhemispheric Plasma (FLIP) code. In a recently submitted paper, the He(+) to H(+) density ratio was examined for all the available data from 1981 to 1984 from the RIMS on DE 1. There are two basic characteristics of the ratio: one is that the ratio decreases with radial distance in the plasmasphere, and the other is the strong dependence of the density ratio on solar activity. In addition to the He(+)/H(+) ratio research, a phenomenon has been studied in the topside ionosphere which relates to the thermal coupling of the ionosphere to the plasmasphere. There is little or no correlation with magnetic and solar activity here. Another study has been directed toward the relation of plasma properties to the density gradients forming the plasmapause. The study has followed a two-pronged approach. First, the observations have been analyzed to determine what happens to the plasma properties across these boundary layers (density gradients). Second, comparisons were made with FLIP model calculations to determine how well the model is able to treat these conditions. Among the significant lessons learned in these studies are two that bear directly on the direction of future investigations in this area. First, composition cannot be viewed independently of thermal structure. Second, solar and magnetic activity effects are real; but the causal relationship between activity and effects is frequently quite complicated because several different processes appear to be operating in different ways and on different time scales. Under these circumstances, large correlation coefficients should not be expected and are not generally found.

Comfort, Richard H.↗
NASA NTRS1980

Plasma Spray System

Computer aided, fully-automatic TRW system sprays very hot plasma onto a turbine blade. Composed of gas into which metallic and ceramic powders have been injected, the plasma forms a two-layer coating which insulates the blade. Critical part of operation is controlling the thickness of the deposit which is measured in thousandths of an inch. This is accomplished by an optical detector which illuminates spots at various locations on the blade and determines thickness by measuring the light reflections. Optical sensor monitors spraying process until precise thickness is attained, then computer halts the spraying.

Source record↗
NASA NTRS2001

Cell-wall architecture and lignin composition of wheat developed in a microgravity environment

The microgravity environment encountered during space-flight has long been considered to affect plant growth and developmental processes, including cell wall biopolymer composition and content. As a prelude to studying how microgravity is perceived - and acted upon - by plants, it was first instructive to investigate what gross effects on plant growth and development occurred in microgravity. Thus, wheat seedlings were exposed to microgravity on board the space shuttle Discovery (STS-51) for a 10 day duration, and these specimens were compared with their counterparts grown on Earth under the same conditions (e.g. controls). First, the primary roots of the wheat that developed under both microgravity and 1 g on Earth were examined to assess the role of gravity on cellulose microfibril (CMF) organization and secondary wall thickening patterns. Using a quick freeze/deep etch technique, this revealed that the cell wall CMFs of the space-grown wheat maintained the same organization as their 1 g-grown counterparts. That is, in all instances, CMFs were randomly interwoven with each other in the outermost layers (farthest removed from the plasma membrane), and parallel to each other within the individual strata immediately adjacent to the plasma membranes. The CMF angle in the innermost stratum relative to the immediately adjacent stratum was ca 80 degrees in both the space and Earth-grown plants. Second, all plants grown in microgravity had roots that grew downwards into the agar; they did not display "wandering" and upward growth as previously reported by others. Third, the space-grown wheat also developed normal protoxylem and metaxylem vessel elements with secondary thickening patterns ranging from spiral to regular pit to reticulate thickenings. Fourthly, both the space- and Earth-grown plants were essentially of the same size and height, and their lignin analyses revealed no substantial differences in their amounts and composition regardless of the gravitational field experienced, i.e. for the purposes of this study, all plants were essentially identical. These results suggest that the microgravity environment itself at best only slightly affected either cell wall biopolymer synthesis or the deposition of CMFs, in contrast to previous assertions.

manned↗
NASA NTRS2005

Multicomponent, Rare-Earth-Doped Thermal-Barrier Coatings

Multicomponent, rare-earth-doped, perovskite-type thermal-barrier coating materials have been developed in an effort to obtain lower thermal conductivity, greater phase stability, and greater high-temperature capability, relative to those of the prior thermal-barrier coating material of choice, which is yttria-partially stabilized zirconia. As used here, "thermal-barrier coatings" (TBCs) denotes thin ceramic layers used to insulate air-cooled metallic components of heat engines (e.g., gas turbines) from hot gases. These layers are generally fabricated by plasma spraying or physical vapor deposition of the TBC materials onto the metal components. A TBC as deposited has some porosity, which is desirable in that it reduces the thermal conductivity below the intrinsic thermal conductivity of the fully dense form of the material. Undesirably, the thermal conductivity gradually increases because the porosity gradually decreases as a consequence of sintering during high-temperature service. Because of these and other considerations such as phase transformations, the maximum allowable service temperature for yttria-partially stabilized zirconia TBCs lies in the range of about 1,200 to 1,300 C. In contrast, the present multicomponent, rare-earth-doped, perovskite-type TBCs can withstand higher temperatures.

Miller, Robert A.↗
NASA NTRS2003

Polar Plasma Wave Investigation Data Analysis in the Extended Mission

The low latitude boundary layer (LLBL) is a region where solar wind momentum and energy is transferred to the magnetosphere. Enhanced "broadband" electric plasma waves from less than 5 Hz to l0(exp 5) Hz and magnetic waves from less than 5 Hz to the electron cyclotron frequency are characteristic of the LLBL. Analyses of Polar plasma waves show that these "broadband" waves are actually discrete electrostatic and electromagnetic modes as well as solitary bipolar pulses (electron holes). It is noted that all wave modes can be generated by approx. 100 eV to approx. 10 keV auroral electrons and protons. We will review wave-particle interactions, with focus on cross- diffusion rates and the contributions of such interactions toward the formation of the boundary layer. In summary, we will present a scenario where the global solar wind-magnetosphere interaction is responsible for the auroral zone particle beams, and hence for the generation of plasma waves and the formation of the boundary layer. It is speculated that all planetary magnetospheres will have boundary layers and they will be characterized by similar currents and plasma wave modes.

Gurnett, Donald A.↗
NASA NTRS2004

Polar Plasma Wave Investigation Data Analysis in the Extended Mission

The low latitude boundary layer (LLBL) is a region where solar wind momentum and energy is transferred to the magnetosphere. Enhanced "broadband" electric plasma waves from less than 5 Hz to 10(exp 5) Hz and magnetic waves from less than 5 Hz to the electron cyclotron frequency are characteristic of the LLBL. Analyses of Polar plasma waves show that these "broadband" waves are actually discrete electrostatic and electromagnetic modes as well as solitary bipolar pulses (electron holes). It is noted that all wave modes can be generated by approx. 100 eV to approx. 10 keV auroral electrons and protons. We will review wave-particle interactions, with focus on cross-diffusion rates and the contributions of such interactions toward the formation of the boundary layer. In summary, we will present a scenario where the global solar wind-magnetosphere interaction is responsible for the auroral zone particle beams, and hence for the generation of plasma waves and the formation of the boundary layer. It is speculated that all planetary magnetospheres will have boundary layers and they will be characterized by similar currents and plasma wave modes.

Gurnett, Donald A.↗