SEARCH · Search NASA

Results for “Potentials”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29

All sources NASA NTRS DOE OSTI

NASA NTRS1978

Line shapes /absorption coefficients/ for satellites and inversion of the data to obtain interaction potentials

Line shapes for cesium broadened by xenon and neopentane have been measured in an absorption cell. The growth of the red satellites, both primary and secondary, were studied on the first five principal series doublets and on the first S-D forbidden doublet. An inversion scheme based on a nearest-neighbor density was employed to invert the measured line shapes and obtain difference potential estimates. It is apparent from the inversion scheme that minor inflections in the difference potential map into strong features in the frequency plane and that contrary to popular assumption, absolute extrema may not be necessary for satellite interpretation. Strength effects observed on the forbidden satellites also demonstrate that the radial dependence of the dipole moment must be accounted for in certain cases.

Exton, R. J.↗

NASA NTRS1979

Determining potential 30/20 GHZ domestic satellite system concepts and establishment of a suitable experimental configuration

NASA is conducting a series of millimeter wave satellite communication systems and market studies to: (1) determine potential domestic 30/20 GHz satellite concepts and market potential, and (2) establish the requirements for a suitable technology verification payload which, although intended to be modest in capacity, would sufficiently demonstrate key technologies and experimentally address key operational issues. Preliminary results and critical issues of the current contracted effort are described. Also included is a description of a NASA-developed multibeam satellite payload configuration which may be representative of concepts utilized in a technology flight verification program.

Stevens, G. H.↗

NASA NTRS1979

Industrial potential, uses, and performance of sputtered and ion plated films

The sputtering and ion plating technology is reviewed in terms of their potential, uses and performance. It offers the greatest flexibility in coating preparation, since coatings can be tailored in any preferred chemical combination, and graded type interfaces (ceramic to metal seals) can be formed. Sputtered and ion plated film characteristics such as the degree of adherence, coherence and morphological growth which contribute to film performance and reliability are described and illustrated as used in practice. It is concluded that the potential future of sputtered and ion plated films for industrial applications will depend primarily upon greater comprehension of materials selection, possible elimination of restrictions for coating/substrate combinations and the awareness of utilizing the proper deposition parameters.

Spalvins, T.↗

NASA NTRS1979

Surveys for sensitivity to fibers and potential impacts from fiber induced failures

The surveys for sensitivities to fibers and potential impacts from fiber induced failures begins with a review of the survey work completed to date and then describes an impact study involving four industrial installations located in Virginia. The observations and results from both the surveys and the study provide guidelines for future efforts. The survey work was done with three broad objectives: (1) identify the pieces of potentially vulnerable equipment as candidates for test; (2) support the transfer function work by gaining an understanding of how fibers could get into a building; and (3) support the economic analysis by understanding what would happen if fibers precipitated a failure in an item of equipment.

Butterfield, A. J.↗

NASA NTRS1979

The calculation of spacecraft potential: Comparison between theory and observation

A simple charge balance model based on the work of DeForest was adapted for the calculation of spacecraft potentials. The model was calibrated with ATS 5 plasma data. Once calibrated, the model was used to calculate the time-varying potential that was observed as a spacecraft passes in and out of eclipse. Errors on the order of + or - 800 volts were observed over a range of 0 to -10,000 volts. Possible applications of the model to large space structures are discussed.

Garrett, H. B.↗

NASA NTRS1979

Global accuracy estimates of point and mean undulation differences obtained from gravity disturbances, gravity anomalies and potential coefficients

Through the method of truncation functions, the oceanic geoid undulation is divided into two constituents: an inner zone contribution expressed as an integral of surface gravity disturbances over a spherical cap; and an outer zone contribution derived from a finite set of potential harmonic coefficients. Global, average error estimates are formulated for undulation differences, thereby providing accuracies for a relative geoid. The error analysis focuses on the outer zone contribution for which the potential coefficient errors are modeled. The method of computing undulations based on gravity disturbance data for the inner zone is compared to the similar, conventional method which presupposes gravity anomaly data within this zone.

Jekeli, C.↗

NASA NTRS1978

Unsteady vortical and entropic distortions of potential flows round arbitrary obstacles

The analysis concerns the alterations produced when small amplitude disturbances, including entropy and vorticity disturbances, are imposed on steady potential flows. For the most general nonacoustic incident distortion field that can be imposed on the uniform upstream flow, it is shown that the perturbation velocity at any point of the resulting unsteady compressible and vortical flow consists of a part that is a known function of the imposed upstream distortion field and the mean flow variables and a potential part that can be found by solving a linear inhomogeneous wave equation with a dipole-type source term whose strength is a known function of the imposed upstream distortion field. The theory is applied to the unsteady flow past a corner, and a closed-form analytical solution is found.

Goldstein, M. E.↗

NASA NTRS1979

Retarding potential analyzer for the Pioneer-Venus Orbiter Mission

The retarding potential analyzer on the Pioneer-Venus Orbiter Mission has been designed to measure most of the thermal plasma parameters within and near the Venusian ionosphere. Parameters include total ion concentration, concentrations of the more abundant ions, ion temperatures, ion drift velocity, electron temperature, and low-energy (0-50 eV) electron distribution function. To accomplish these measurements on a spinning vehicle with a small telemetry bit rate, several functions, including decision functions not previously used in RPA's, have been developed and incorporated into this instrument. The more significant functions include automatic electrometer ranging with background current compensation; digital, quadratic retarding potential step generation for the ion and low-energy electron scans; a current sampling interval of 2 ms throughout all scans; digital logic inflection point detection and data selection; and automatic ram direction detection. Extensive numerical simulation and plasma chamber tests have been conducted to verify adequacy of the design for the Pioneer Mission.

Knudsen, W. C.↗

NASA NTRS1981

Potential flow in two-dimensional deflected nozzles

Three programs analyze flow: SCIRCL, geometry definition program; 24Y, incompressible two-dimensional potential-flow program; and NOZZLEC, program combining incompressible potential-flow solutions into solutions of interest after compressibility correction. Program group is written in FORTRAN IV for implementation on UNIVAC 1100/42.

Hawk, J. D.↗

NASA NTRS1979

The potential of carbon fiber induced shock hazards in household toasters

The average exposure to carbon fibers which produced a short and potential shock hazard in a household toaster was determined. Toasters are normally in the off state. They are used for brief periods during the day and have timed cycles during which power is applied. The possibility of a short occurring from the heating element to the case was investigated to find the exposure levels at which a potential shock hazard could appear. The short produced was tested to determine its importance.

Meyers, J. A.↗

NASA NTRS1979

Computer prediction of three-dimensional potential flow fields in which aircraft propellers operate: Computer program description and users manual

A method was developed for predicting the potential flow velocity field at the plane of a propeller operating under the influence of a wing-fuselage-cowl or nacelle combination. A computer program was written which predicts the three dimensional potential flow field. The contents of the program, its input data, and its output results are described.

Jumper, S. J.↗

NASA NTRS1980

Assessment of potential exposure to friable insulation materials containing asbestos

Asbestos and the procedures for assessing potential exposure hazards are discussed. Assessment includes testing a bulk sample of the suspected material for the presence of asbestos, and monitoring the air, if necessary. Based on field inspections and laboratory analyses, the health hazard is evaluated, and abatement measures are taken if a potential hazard exists. Throughout the assessment and abatement program, all applicable regulations are administered as specified by the Environmental Protection Agency and the Occupational Safety and Health Administration.

Kim, W. S.↗

NASA NTRS1980

Potential release of fibers from burning carbon composites

A comprehensive experimental carbon fiber source program was conducted to determine the potential for the release of conductive carbon fibers from burning composites. Laboratory testing determined the relative importance of several parameters influencing the amounts of single fibers released, while large-scale aviation jet fuel pool fires provided realistic confirmation of the laboratory data. The dimensions and size distributions of fire-released carbon fibers were determined, not only for those of concern in an electrical sense, but also for those of potential interest from a health and environmental standpoint. Fire plume and chemistry studies were performed with large pool fires to provide an experimental input into an analytical modelling of simulated aircraft crash fires. A study of a high voltage spark system resulted in a promising device for the detection, counting, and sizing of electrically conductive fibers, for both active and passive modes of operation.

Bell, V. L.↗

NASA NTRS1980

The potential for damage from the accidental release of conductive carbon fibers from aircraft composites

The paper considers the potential for damage from the accidental release of conductive carbon fibers from aircraft composites. The electrical conductivity of carbon and graphite fibers has led to electrical equipment damage from the inadvertent release of virgin fibers into the atmosphere; an accidental release of carbon fibers from filamentary composites from the burning of crashed commercial airliners could damage electrical and electronic equipment. The experimental and analytical results by NASA of the methods of assessing the extent of potential damage in terms of costs is presented; the NASA materials research program to provide alternate or modified composites to overcome electrical hazards of carbon composites in aircraft structures is described.

Bell, V. L.↗

NASA NTRS1980

Pioneer Venus Orbiter planar retarding potential analyzer plasma experiment

The retarding potential analyzer (RPA) on the Pioneer Venus Orbiter Mission measures most of the thermal plasma parameters within and near the Venusian ionosphere. Parameters include total ion concentration, concentrations of the more abundant ions, ion temperatures, ion drift velocity, electron temperature, and low-energy (0-50 eV) electron distribution function. Several functions not previously used in RPA's were developed and incorporated into this instrument to accomplish these measurements on a spinning spacecraft with a small bit rate. The more significant functions include automatic electrometer ranging with background current compensation; digital, quadratic retarding potential step generation for the ion and low-energy electron scans; a current sampling interval of 2 ms throughout all scans; digital logic inflection point detection and data selection; and automatic ram direction detection.

Knudsen, W. C.↗

NASA NTRS1980

Potential benefits for propfan technology on derivatives of future short- to medium-range transport aircraft

It is noted that several NASA-sponsored studies have identified a substantial potential fuel savings for high subsonic speed aircraft utilizing the propfan concept compared to the equivalent technology turbofan aircraft. Attention is given to a feasibility study for propfan-powered short- to medium-haul commercial transport aircraft conducted to evaluate potential fuel savings and identify critical technology requirements using the latest propfan performance data. An analysis is made of the design and performance characteristics of a wing-mounted and two-aft-mounted derivative propfan aircraft configurations, based on a DC-9 Super 80 airframe, which are compared to the baseline turbofan design. Finally, recommendations for further research efforts are also made.

Goldsmith, I. M.↗

NASA NTRS1981

On the structures and mapping of auroral electrostatic potentials

The mapping of magnetospheric and ionospheric electric fields in a kinetic model of magnetospheric-ionospheric electrodynamic coupling proposed for the aurora is examined. One feature is the generalization of the kinetic current-potential relationship to the return current region (identified as a region where the parallel drop from magnetosphere to ionosphere is positive); such a return current always exists unless the ionosphere is electrically charged to grossly unphysical values. A coherent phenomenological picture of both the low energy return current and the high energy precipitation of an inverted-V is given. The mapping between magnetospheric and ionospheric electric fields is phrased in terms of a Green's function which acts as a filter, emphasizing magnetospheric latitudinal spatial scales of order (when mapped to the ionosphere) 50 to 150 km. This same length, when multiplied by electric fields just above the ionosphere, sets the scale for potential drops between the ionosphere and equatorial magnetosphere.

Chiu, Y. T.↗

NASA NTRS1981

Flight evaluation of a simple total energy-rate system with potential wind-shear application

Wind shears can create havoc during aircraft terminal area operations and have been cited as the primary cause of several major aircraft accidents. A simple sensor, potentially having application to the wind-shear problem, was developed to rapidly measure aircraft total energy relative to the air mass. Combining this sensor with either a variometer or a rate-of-climb indicator provides a total energy-rate system which was successfully applied in soaring flight. The measured rate of change of aircraft energy can potentially be used on display/control systems of powered aircraft to reduce glide-slope deviations caused by wind shear. The experimental flight configuration and evaluations of the energy-rate system are described. Two mathematical models are developed: the first describes operation of the energy probe in a linear design region and the second model is for the nonlinear region. The calculated total rate is compared with measured signals for many different flight tests. Time history plots show the tow curves to be almost the same for the linear operating region and very close for the nonlinear region.

Ostroff, A. J.↗