Search NASA⌕ Search

SEARCH · Search NASA

Results for “ROLL”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29
All sourcesNASA NTRSDOE OSTI
NASA NTRS1973

A roll-pitch interaction simulator and a control position command encoder for remote piloting of spin-entry research models

The Langley Research Center uses radio-controlled, scaled aircraft models to study the spin-entry characteristics of aircraft. Recent spin-entry studies required the use of an electronic proportional-control system for manipulating model control surfaces. In order to meet control system requirements, a special-purpose analog computer was designed to simulate the coupling between roll and pitch controls. A digital encoder was designed to encode the voltage analogs of control-surface position into a special pulse format for transmission to the model. This paper describes the two special developments and their relationship to the functions of the overall control system.

Meissner, C. W., Jr.↗
NASA NTRS1974

Roll plane analysis of on-aircraft antennas

Roll plane radiation patterns of on-aircraft antennas are analyzed using high frequency solutions. Aircraft-antenna pattern performance in which the aircraft is modelled in its most basic form is presented. The fuselage is assumed to be a perfectly conducting elliptic cylinder with the antennas mounted near the top or bottom. The wings are simulated by arbitrarily many sided flat plates and the engines by circular cylinders. The patterns in each case are verified by measured results taken on simple models as well as scale models of actual aircraft.

Burnside, W. D.↗
NASA NTRS1973

Hollow rolling element bearings

A low mass rolling element with a lightweight core and hollow center was developed for use in bearings. The core is plated so as to provide a hard surface and increase the life and reliability of the high speed ball bearings.

Parker, R. J.↗
NASA NTRS1974

Roll plane analysis of on-aircraft antennas

The roll plane radiation patterns of on-aircraft antennas are analyzed using high frequency solutions. This is a basic study of aircraft-antenna pattern performance in which the aircraft is modelled in its most basic form. The fuselage is assumed to be a perfectly conducting elliptic cylinder with the antennas mounted near the top or bottom. The wings are simulated by arbitrarily many sided flat plates and the engines by circular cylinders. The patterns in each case verified by measured results taken on simple models as well as scale models of actual aircraft.

Burnside, W. D.↗
NASA NTRS1973

Rolling-element bearings - A review of the state of the art

Some of the research conducted which has brough rolling-element technology to its present state is discussed. Areas touched upon are material effects, processing variables, operating variables, design optimization, lubricant effects and lubrication methods. Finally, problem areas are discussed in relation to the present state-of-the-art and anticipated requirements.

Anderson, W. J.↗
NASA NTRS1973

On the inviscid rolled-up structure of lift-generated vortices

A simple form is presented of the relationships derived by Betz for the inviscid, fully developed structure of lift-generated vortices behind aircraft. An extension is then made to arbitrary span-load distributions by inferring guidelines for the selection of rollup centers for the vortex sheet. These techniques are easier to use and yield more realistic estimates of the rolled-up structure of vortices than the original form of Betz' theory when the span loading differs appreciably from elliptic loading.

Rossow, V. J.↗
NASA NTRS1974

Spoilers for roll control of light airplanes

The paper presents an overview of the state-of-the-art of roll control spoilers for light airplanes. Reasons for using spoilers on light airplanes are presented. Several classical objections to the use of spoilers of such airplanes are critically examined. It is shown that mechanically driven spoiler systems can be designed. Flight test results of a new mechanically driven spoiler on the Redhawk airplane are discussed. Tunnel data of spoilers on the new general aviation airfoil GA(W)-1 are presented. Finally, a bibliography on spoiler data is included.

Roskam, J.↗
NASA NTRS1973

An experimental study of the motorcycle roll stabilization task

The work of Sharp represents the most complete theoretical analysis of the uncontrolled motorcycle presently available, and serves as a theoretical basis for the study described. Sharp's analysis included roll, yaw, lateral translation, and steering degrees of freedom, and the resulting equations are linear with constant coefficients. Tire aligning moments due to tire sideslip were added to Sharp's equations. Experimental results are presented, and related to the theoretical studies of Sharp and Weir.

Eaton, D. J.↗
NASA NTRS1974

The viscous lubrication of rolling and sliding rigid cylinders

The viscous lubrication of rolling and sliding cylinders is studied both independently and with the aid of much of the previous work done by other investigators. Building upon the specialized results of others, a problem formulation is obtained which encompasses the general viscous fluid as well as the linear viscous fluid. A uniform solution technique is derived which is adequate for the general problem formulation. Results obtained for three special classes of viscosity functions are presented.

Carlson, S. F.↗
NASA NTRS1974

Roll-up of aircraft trailing vortices using artificial viscosity

The artificial viscosity method of Kuwahara and Takami (1973) is used to calculate the roll-up of trailing vortices behind a number of practical aerodynamic configurations. Where possible, the results are compared for core location with available experimental data.

Bloom, A. M.↗
NASA NTRS1974

A simple interpretation of the 'rolling motions'

The rolling motion phenomenon is interpreted as an apparent motion in the observations. It is caused by (1) the combined effect of the differential rotation and the bending of the galactic plane for the spiral arms beyond the solar circle, or (2) the displacement of the spiral arms from the central galactic plane for those within the solar circle.

Yuan, C.↗
NASA NTRS1975

An in-flight investigation of nonlinear roll control

An in-flight simulation was undertaken to study the piloting problems associated with a type of nonlinear control effectiveness which is characteristic of spoiler roll control systems. Typically, the initial response is small or even zero, followed by a narrow region of highly effective control, and a final one of moderate effectiveness. Results for the landing flare and touchdown, which turned out to be the critical flight phase, indicate that a substantial amount of dead zone and changing effectiveness can be tolerated, but the best level of handling is obtained with linear, aileron-like control.

Ellis, D. R.↗
NASA NTRS1976

Rolling-element fatigue life with two synthetic cycloaliphatic traction fluids

The life potential of two synthetic cycloaliphatic hydrocarbon traction fluids in rolling element fatigue was evaluated in a five ball fatigue tester. Life comparisons with a MIL-L-23699 qualified tetraester oil showed that the traction test oils had good fatigue life performance, comparable to that of the tetraester oil. No statistically significant life differences between the traction fluids and the tetraester oil were exhibited under the accelerated fatigue test conditions. Erratic operating behavior was occasionally encountered during tests with the antiwear additive containing traction fluid for reasons thought to be related to excessive chemical activity under high contact pressure. This behavior occasionally resulted in premature test termination due to excessive surface distress and overheating.

Loewenthal, S. H.↗
NASA NTRS1976

A method for predicting the stability in roll of automatically controlled aircraft based on the experimental determination of the characteristics of an automatic pilot

A method is suggested for predicting the stability of automatically controlled aircraft by a comparison of calculated frequency-response curves for the aircraft and experimentally determined frequency-response curves for the automatic pilot. The method is applied only to stabilization in roll. The method is expected to be useful as a means of establishing the specifications of the performance required of the automatic control device for pilotless aircraft designed as missiles.

Jones, R. T.↗
NASA NTRS1975

Human confort response to random motions with a dominant rolling motion

Subjective ride comfort response ratings were measured on a visual motion simulator with rolling velocity inputs with various power spectra shapes and magnitudes. The results show only little influence of spectra shape on comfort response. The effects of magnitude on comfort response indicate the applicability of psychophysical precepts for comfort modeling.

Stone, R. W., Jr.↗
NASA NTRS1976

Flexural fatigue of hollow rolling elements

Hollow cylindrical bars were tested in the rolling-contact fatigue tester to determine the effects of material and outside diameter to inside diameter (OD/ID) ratios of 2.0, 1.6, 1.4, and 1.2 on fatigue failure mode and subsequent failure propagation. The range of applied loads with these OD/ID ratios resulted in maximum tangential tensile stresses ranging from 165 to 655 megapascals (24,000 to 95,000 psi) at the bore surface. Flexural failures of the hollow test bars occurred when this bore stress was 490 megapascals (71,000 psi) or greater with AISI 52100 hollow bars and 338 megapascals (49,000 psi) or greater with AISI M-50 hollow bars. Good correlation was obtained in relating the failures of these hollow bars with flexural failures of drilled balls from previously published full scale bearing tests.

Bamberger, E. N.↗
NASA NTRS1976

Prediction of jump phenomena in roll-coupled maneuvers of airplanes

An easily computerized analytical method is developed for identifying critical airplane maneuvers in which nonlinear rotational coupling effects may cause sudden jumps in the response to pilot's control inputs. Fifth and ninth degree polynomials for predicting multiple pseudo-steady states of roll-coupled maneuvers are derived. The program calculates the pseudo-steady solutions and their stability. The occurrence of jump-like responses for several airplanes and a variety of maneuvers is shown to correlate well with the appearance of multiple stable solutions for critical control combinations. The analysis is extended to include aerodynamics nonlinear in angle of attack.

Schy, A. A.↗
NASA NTRS1977

Rolling moments in a trailing vortex flow field

Pressure distributions are presented which were measured on a wing in close proximity to a tip vortex of known structure generated by a larger, upstream semispan wing. Overall loads calculated by integration of these pressures are checked by independent measurements made with an identical model mounted on a force balance. Several conventional methods of wing analysis are used to predict the loads on the following wing. Strip theory is shown to give uniformly poor results for loading distribution, although predictions of overall lift and rolling moment are sometimes acceptable. Good results are obtained for overall coefficients and loading distribution by using linearized pressures in vortex-lattice theory in conjunction with a rectilinear vortex. The equivalent relation from reverse-flow theory that can be used to give economic predictions for overall loads is presented.

Mcmillan, O. J.↗