Search NASA⌕ Search

SEARCH · Search NASA

Results for “SINTERING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29

Oxidation effects on spark plasma sintering of molybdenum nanopowders

Surface-oxidized molybdenum nanopowders are compacted by spark plasma sintering (SPS). The oxide impurity behavior is analyzed under various sintering temperatures. The densification mechanism of the nanopowders with a melted oxide phase is identified in situ by regression analysis of the experimental data on the temperature-dependent porosity change and on the SPS multistep pressure dilatometry. To increase the density of the compacted pellets, the nanopowders with the oxide phase are consolidated by SPS using the two in situ oxide removal methods: carbothermic reduction and particle surface cleaning by the electric current flow through the powders. Finally, the advantages and disadvantages of these methods in terms of the density, grain size, and mechanical properties of the final products are discussed.

36 MATERIALS SCIENCE↗

An Experimental Investigation of Sintered Particle Effect on Heat Transfer Performance in an “Annular Flow” Evaporation Tube

Wicking structures have been widely used within passive heat transfer devices with high heat fluxes, such as heat pipes, to enhance their thermal performance. While wicking structures promote capillary pumping of the working fluid and thin film evaporation, they can result in capillary evaporation and further enhance the evaporation heat transfer. In this study, a 0.5 mm thick layer of 105 µm sintered copper particles was added to the inner wall of a copper tube, aiming to form an “annular flow” and enhance the heat transfer characteristics by taking advantage of thin film and capillary evaporation. Acetone was chosen as the working fluid, and the performance of an evaporation tube was tested for power inputs of 10, 30, 50, and 70 W. For each power input, trials were run at inclination angles varying from -90 deg to 90 deg to investigate the capillary effects. The temperature measurements showed that the temperature distribution along the evaporation tube is always downward sloping, meaning the temperature at the fluid inlet is larger than the outlet. In conclusion, results show that an “annular flow” formed by a thin layer of sintered particles can promote thin film and capillary evaporation and, therefore, boost the evaporation heat transfer coefficient.

42 ENGINEERING↗

Nd{sup 3+}:Y{sub 3}Al{sub 5}O{sub 12} laser ceramics: Influence of the size of yttrium oxide particles on sintering

The influence of the size of Y{sub 2}O{sub 3} powder particles on the structure formation and densification of Nd{sup 3+}:Y{sub 3}Al{sub 5}O{sub 12} laser ceramics has been studied. It is shown that the use of 50- and 100-nm yttrium oxide particles makes it possible to synthesize single-phase yttrium aluminum garnet at temperatures of 1200 and 1500°C, respectively, whereas in the case of 5000-nm yttrium oxide particles 2-h exposure at a temperature of 1500°C yields only 80 wt % of the Nd{sup 3+}:Y{sub 3}Al{sub 5}O{sub 12} phase. Bulk swelling of pressed samples during sintering of 2.94Y{sub 2}O{sub 3}-0.06Nd{sub 2}O{sub 3}-5Al{sub 2}O{sub 3} powders with the size ratio of the initial particles R(Al{sub 2}O{sub 3}/Y{sub 2}O{sub 3}) ∼ 5 is observed. The application of different-sized powders (R ∼ 2.5) provides quantitative ratios between phases in the 3Y{sub 2}O{sub 3}-5Al{sub 2}O{sub 3} system at which shrinkage in a temperature range of 20–1500°C is dominant. Laser ceramics 0–2 at % Nd{sup 3+}:Y{sub 3}Al{sub 5}O{sub 12} have been obtained by the solid-phase sintering of oxide powders (R ∼ 2.5). The slope efficiency for 1 at % Nd{sup 3+}:Y{sub 3}Al{sub 5}O{sub 12} laser ceramics is found to be 33%.

36 MATERIALS SCIENCE↗

Phenomenological model of sintering of oxide nuclear fuel with doping admixtures

It is shown that a change in the linear dimension of compacted UO{sub 2} in the sintering process is associated with its plastic yielding under the action of the forces of residual stress and capillary forces. From the curves of sintering of a fuel with doping admixtures in various gaseous media, its rate of creep is reduced.

36 MATERIALS SCIENCE↗

Role of Excess Manganese in Formation of the Structure and Transport Properties of Manganite (Nd{sub 0.67}Sr{sub 0.33}){sub 1–x}Mn{sub 1+} {sub x}O{sub 3} (x = 0, 0.2) Sintered at 1273–1473 K

The Nd{sub 0.67}Sr{sub 0.33}MnO{sub 3} manganite is a material promising for application as a cathode for medium-temperature solid oxide fuel elements. A high electrical conductivity of such a cathode is the parameter determining the efficiency of the operation of a fuel element. In this report, the effect of influence of excess manganese on the structure and the conductivity of manganite ceramics with compositions (Nd{sub 0.67}Sr{sub 0.33}){sub 1–x}Mn{sub 1+} {sub x}O{sub 3±Δ} (x = 0, 0.2) sintered at temperatures 1273–1673 K is presented for the first time. The existence of 20% excess manganese in the initial manganite powder after sintering is shown to lead to that the conductivity of the obtained ceramics in the temperature range 823–1073 K is several times higher than the conductivity of the ceramics without excess manganese.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Impact of the Sintering Additive Al{sub 2}O{sub 3} on the Electrical Conductivity of Proton-Conducting Electrolyte CaZr{sub 0.95}Sc{sub 0.05}O{sub 3 – δ}

The impact of sintering additive Al{sub 2}O{sub 3} on the electrical conductivity of calcium zirconate-based polycrystalline proton-conducting electrolyte CaZr{sub 0.95}Sc{sub 0.05}O{sub 3 – δ} (CZS) is studied. With the sintering additive Al{sub 2}O{sub 3}, ceramic samples synthesized by a combustion technique are denser, and relatively low synthesis temperatures can be used (1470°C). Adding 0.1–0.5 wt % Al{sub 2}O{sub 3} leads to an increase in the grain size from 100 nm to 1–2 μm. Increasing the Al{sub 2}O{sub 3} content up to 0.3 wt % favors a growth in the electrolyte conductivity. For samples containing Al{sub 2}O{sub 3}, calcium aluminates are detected at grain boundaries. In samples exposed to humid air, charge transfer both in the grain bulk and at intergrain boundaries is found to be mediated by protons.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Study of the Microstructure of the Aluminum-Based Composite Material with the Addition of Carbon Nanotubes after Spark Plasma Sintering

Electron microscopy is used to study samples of an aluminum matrix composite material with multiwalled carbon nanotubes (MWCNTs). The features of microstructure changes occurring during the preparation of a composite in a spark plasma sintering (SPS) setup are identified. The results of the simulation of the SPS process are presented taking into account the high electro- and heat-conducting properties of MWCNTs, which qualitatively explain the differences in the sintering processes of pure aluminum and composite samples.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

The Influence of Corundum Content and Sintering Temperature on the Mechanical Properties of CaO–ZrO{sub 2}–Al{sub 2}O{sub 3} Ceramic Composites

We have studied the mechanical properties (Vickers microhardness H{sub V} and fracture toughness K{sub C}) of nanostructured CaO–ZrO{sub 2}–Al{sub 2}O{sub 3} ceramic composites as dependent on the content of corundum (0 ≤ C{sub Al{sub 2O{sub 3}}} ≤ 25%) and the temperature of sintering (1250°C ≤ T{sub 1} ≤ 1500°C). Optimum value of the corundum content (C{sub Al{sub 2O{sub 3}}} = 5%) and optimum regime (T{sub 1} = 1300°C, 5 min; T{sub 2} = 1200°C, 4 h) of two-stage sintering are established, which favor attaining the best mechanical characteristics of ceramic composites (H{sub V} = 12.25 GPa, K{sub C} = 8.47 MPa m{sup 1/2}).

36 MATERIALS SCIENCE↗

Influence of Cobalt and Molybdenum Additives on the Structure and Shape Memory Parameters of Reaction-Sintered Porous Nickel Titanium Alloys

We have studied the structure and properties of porous nickel titanium (TiNi) alloys obtained upon reaction sintering of Ti and Ni powders with Co and Mo additives. It is established that Co and Mo doping additives retain the compaction of Ni powder achieved at the initial stage of sintering. The maximum deformation of porous samples loaded in the austenite state was observed upon adding Co, while the addition of Mo resulted in minimum deformation. The addition of Co leads to single-stage martensitic transformation in TiNi phase, while the addition of Mo leads to the two-stage transformation that is more homogeneous over the volume. Both Co and Mo additives lead to increase in the maximum accumulated strain due to the formation of favorably oriented stress-induced martensite and reoriented quench-induced martensite.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A High-Performance Sintered Iron Electrode for Rechargeable Alkaline Batteries to Enable Large-Scale Energy Storage

Iron-based alkaline rechargeable batteries such as iron-air and nickel-iron batteries are particularly attractive for large-scale energy storage because these batteries can be relatively inexpensive, environment- friendly, and also safe. Therefore, our study has focused on achieving the essential electrical performance and cycling properties needed for the widespread use of iron-based alkaline batteries in stationary and distributed energy storage applications.We have demonstrated for the first time, an advanced sintered iron electrode capable of 3500 cycles of repeated charge and discharge at the 1-hour rate and 100% depth of discharge in each cycle, and an average Coulombic efficiency of over 97%. Such a robust and efficient rechargeable iron electrode is also capable of continuous discharge at rates as high as 3C with no noticeable loss in utilization. We have shown that the porosity, pore size and thickness of the sintered electrode can be selected rationally to optimize specific capacity, rate capability and robustness. As a result, these advances in the electrical performance and durability of the iron electrode enables iron-based alkaline batteries to be a viable technology solution for meeting the dire need for large-scale electrical energy storage.

25 ENERGY STORAGE↗

High-throughput, Ultra-fast Laser Sintering of Ceramics and AI Based Prediction on Processing-Microstructure-Property Relationships

We report high-throughput, ultra-fast laser sintering of alumina sample array and characterization of sample units’ microstructure and hardness, as a fast exploration of laser processing parameters, microstructure, and property. These experimental data were used to train machine-learning (ML) models. Accurate ML predictions were demonstrated for the processing-microstructure-property relationship, specifically in (1) prediction of the microstructure of alumina under arbitrary laser power and (2) prediction of the expected microstructure from the desired hardness. An independent neural network was developed and showed that ML-predicted microstructure had less than 10% error from real ones, in terms of projected hardness. To monitor the microstructure during laser sintering, we demonstrated an ML model that can instantaneously predict ceramic’s microstructure at the laser spot, based on the laser spot brightness. The ML model can generate more than 10 predictions per second, and the error in average grain size was less than 5% from the experimental observations.

36 MATERIALS SCIENCE↗

Coupling of Spark Plasma Sintering with Advanced Modeling to Enable Process Scale-Up: Presentation to DOE-NE [Slides]

The research goal of this project is to develop at Idaho National Laboratory (INL) a first-of-its-kind Multiphysics Object-Oriented Simulation Environment (MOOSE)-based, multiscale, multiphysics spark plasma sintering (SPS) modeling and simulation code application, termed “Freya.” Freya will simulate the thermo-mechanical-electrical aspects of the SPS fabrication process and will be paired with lower length scale sub-models, such as phase-field, to predict the resulting microstructure. SPS is an advanced manufacturing process that can be used to solve a variety of material manufacturing challenges; however, this process is an extremely challenging problem for modeling and simulation. The SPS process is inherently multiphysics and multi-scale, with the macroscale electro-thermo-mechanical behavior linked intricately to the microstructure evolution of the part being sintered. Accurate modeling and simulation tools, specifically geared towards the SPS process, are needed to predict the influence of the multiple variables involved in the manufacturing process. Modeling and simulation accuracy is achieved and demonstrated through comparison to multiple validation experiments. The validation efforts for Freya include both separate effects and complete multiphysics SPS process experiments. One of the key benefits this Laboratory Directed Research & Development (LDRD) project offers stems from the emphasis placed on experimental validation of the Freya models, both on the individual length scales and of the final coupled multiscale multiphysics simulations. Experimental validation of Freya’s multiscale coupling capability provides the technical credibility necessary for potential future industry and research partners to accept the simulation predictions.

36 MATERIALS SCIENCE↗

Machine-learning-based, online estimation of ceramic’s microstructure upon the laser spot brightness during laser sintering

The ceramic microstructure strongly influences its properties. During manufacturing, the online monitoring of microstructure is critical to ensure the desired material properties. So far, the microstructure on the relevant scale is usually characterized offline using scanning electron microscopy (SEM), which is time and cost-consuming. In this work, we demonstrate a cost-effective, machine learning (ML)-based approach to simulate the SEM micrographs in real-time from the laser spot brightness. We experimentally observed a strong correlation between the laser spot brightness and the corresponding microstructure at the exact locations. The brightness values obtained from thermal emission images and the corresponding SEM micrographs were used in the training datasets. The ML algorithm was a style-based conditional generative adversarial network (CGAN). After training, the ML model could generate high-fidelity microstructure images within 0.1 seconds based on in-situ captured brightness at the laser sintering spot. We used the average grain sizes as the metric to evaluate the accuracy of the ML-predicted micrographs. Here, the ML-predicted microstructures were in good agreement, with less than 5% in difference from the real SEM images. In conclusion, we demonstrate the cost-effective, online microstructure estimation during laser sintering with a simple setup (a camera, a regular computer, and the ML model).

08 HYDROGEN↗

In Situ Microstructure Characterization of Potassium Di-Phosphate (KDP) Densification during Cold Sintering

In order for ceramic additive manufacturing (AM) to achieve its full potential, it is increasingly important to develop a more rigorous understanding of fundamental phenomena that govern the kinetics and thermodynamics of ceramic AM processes. In the case of additive build processes, such as direct ink write and ceramic extrusion, methods for densifying the resulting green-body product need to be considered to complement the efficiencies of ceramics AM, itself. One densification route, at least for monolithic components, built layer-by-layer, is offered by the recently developed cold sintering process, whereby high-density final product is achieved through addition of a small amount of liquid solvent and application of modest uniaxial compressive stress at relatively low temperature. In situ small-angle X-ray scattering methods and X-ray diffraction have been applied to characterize and quantify the pore morphology evolution during cold sintering for a model system: potassium di-phosphate, KH 2 PO 4 (KDP). It is shown that both temperature and applied stress affect the densification rate, but stress has a stronger effect on the evolving morphology. A regime with an approximate linear densification rate can be identified, yielding an effective densification activation energy of ≈90 kJ/mol.

36 MATERIALS SCIENCE↗

Unconventional Materials Processing Using Spark Plasma Sintering

Spark plasma sintering (SPS) has gained recognition in the last 20 years for its rapid densification of hard-to-sinter conventional and advanced materials, including metals, ceramics, polymers, and composites. Herein, we describe the unconventional usages of the SPS technique developed in the field. The potential of various new modifications in the SPS technique, from pressureless to the integration of a novel gas quenching system to extrusion, has led to SPS’ evolution into a completely new manufacturing tool. The SPS technique’s modifications have broadened its usability from merely a densification tool to the fabrication of complex-shaped components, advanced functional materials, functionally gradient materials, interconnected materials, and porous filter materials for real-life applications. The broader application achieved by modification of the SPS technique can provide an alternative to conventional powder metallurgy methods as a scalable manufacturing process. The future challenges and opportunities in this emerging research field have also been identified and presented.

36 MATERIALS SCIENCE↗

Spark Plasma Sintering of Commercial Zirconium Carbide Powders: Densification Behavior and Mechanical Properties

Commercial zirconium carbide (ZrC) powder is consolidated by Spark Plasma Sintering (SPS). Processing temperatures range from 1650 to 2100 °C. Specimens with various density levels are obtained when performing single-die SPS at different temperatures. Besides the single-die tooling setup, a double-die tooling setup is employed to largely increase the actual applied pressure to achieve higher densification in a shorter processing time. In order to describe the densification mechanism of ZrC powder under SPS conditions, a power-law creep constitutive equation is utilized, whose coefficients are determined by the inverse regression of the obtained experimental data. The densification of the selected ZrC powder is shown to be likely associated with grain boundary sliding and dislocation glide controlled creep. Transverse rupture strength and microhardness of sintered specimens are measured to be up to 380 MPa and 24 GPa, respectively. Mechanical properties are correlated with specimens’ average grain size and relative density to elucidate the co-factor dependencies.

36 MATERIALS SCIENCE↗

Investigating Sintering Mechanisms for Additive Manufacturing of Conductive Traces

Additive Manufacturing (AM) processes enable the fabrication of miniaturized and flexible devices on complex geometries. This paper explores a hybrid additive manufacturing technology that integrates micro-extrusion and PICO-jetting methods. Conductive slurries and colloidal inks were optimized for their rheological properties to aid their precise deposition. A variety of conductive materials which include carbon, silver, nano-particle silver and nickel were deposited on both rigid (glass) and flexible (Kapton) substrates. The deposited traces were cured using two sintering mechanisms which include furnace heating and in situ laser irradiation. The effect of curing mechanism on the conductance of deposited traces was evaluated. The results indicated that traces could be cured successfully with the laser curing mechanism. Nickel and silver laser cured traces had lower resistivity than the furnace sintered traces. An increase in the laser power resulted in lower resistivity of the traces. The lowest resistivity was achieved at 40W laser power with a single laser pass. Scanning electron microscopy and energy dispersive spectroscopy were used to characterize the trace morphology and elemental compositions. Higher power laser curing resulted in better bonding of the particles. Laser cured samples had minimal oxidation to the cross-section region of the traces as compared to furnace cured samples. Furthermore, this research lays the foundation for the fabrication of electronic components for a high level of freeform 3D electronics using a hybrid additive manufacturing technology.

42 ENGINEERING↗

Development of iodine waste forms using low-temperature sintering glass.

This presentation will describe our recent work on the use of low temperature-sintering glass powders mixed with either AgI or AgI-zeolite to produce a stable waste form. Radioactive iodine ({sup 129}I, half-life of 1.6 x 10{sup 7} years) is generated in the nuclear fuel cycle and is of particular concern due to its extremely long half-life and its effects on human health. As part of the DOE/NE Advanced Fuel Cycle Initiative (AFCI), the separation of {sup 129}I from spent fuel during fuel reprocessing is being studied. In the spent fuel reprocessing scheme under consideration, the iodine is released in gaseous form and collected using Ag-loaded zeolites, to form AgI. Although AgI has extremely low solubility in water, it has a relatively high vapor pressure at moderate temperatures (>550 C), thus limiting the thermal processing. Because of this, immobilization using borosilicate glass is not feasible. Therefore, a bismuth oxide-based glasses are being studied due to the low solubility of bismuth oxide in aqueous solution at pH > 7. These waste forms were processed at 500 C, where AgI volatility is low but the glass powder is able to first densify by viscous sintering and then crystallize. Since the glass is not melted, a more chemically stable glass can be used. The AgI-glass mixture was found to have high iodine leach resistance in these initial studies.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗